未来舎 List of Products and Services

The battery charger "CH-1225GFP" is a compact and lightweight fully automatic battery charger that requires no maintenance. Its noise characteristics are also very excellent, and it hardly causes noise interference even when most electronic devices are placed nearby. The GFP series is PSE compliant. For more details, please download the catalog.

• Power generation equipment
• others

The battery charger "CH-1225GFP" is a compact and lightweight fully automatic battery charger that requires no maintenance. Its noise characteristics are also very excellent, and it hardly causes any noise interference even when most electronic devices are placed nearby. The GFP series is PSE compliant. For more details, please download the catalog.

• Power generation equipment
• others

The solar battery charge and discharge controller "PV-1230D1AB" allows you to check the day's power generation via an LCD display and monitor the battery status with a three-color LED. The low voltage cut-off and reconnection can be set using a push switch, enabling the construction of an advanced control system. For more details, please download the catalog.

• Other security systems
• others

The solar battery charge and discharge controller "PV-2412D1AB" allows you to check the day's power generation via an LCD display and monitor the battery status with a three-color LED. Since low voltage disconnection and reconnection can be set using a push switch, it enables the construction of an advanced control system. For more details, please download the catalog.

• Other security systems
• others

○ External control terminal: Remote control via engine key linkage or external contact switch ○ Ultra-low standby current: Approximately 80mA, making it very suitable for automotive use due to its minimal power consumption in standby mode. ○ High efficiency: Particularly necessary for valuable batteries, achieving approximately 90% efficiency in power conversion. ○ Dual output: Equipped with multiple terminals for a maximum of 40A and 15A. (However, the total current must be used below 40A) ○ Overload electronic protection: Automatically cuts off output when overloaded. (To reset, the power switch must be turned off and on again) ○ Low noise: Significantly lower noise than conventional switching converters, allowing use similar to regular power supplies without worrying about noise. ○ Automatic cooling fan: The fan starts when the case temperature exceeds a certain level and automatically stops when the temperature falls below a certain level. ○ Slim design: Despite high current capacity, it is compact and particularly slim. ○ Selected components: Uses high-performance components such as metal film resistors and glass-epoxy boards, specifically selected for industrial use.

• Power generation equipment

You can remotely turn the FI-S1500GRS ON/OFF.

• Power generation equipment

The solar battery charge and discharge controller "PV-1212D1A" is a budget version with some functions removed from the D1A series, but it is equipped with the necessary features for a solar controller. For more details, please download the catalog.

• Other security systems
• others

It is a high-function remote control with LED display that allows you to turn the inverter ON/OFF from a distance without using the POWER SWITCH on the inverter itself, and to check various statuses.

• Power generation equipment

This is a high-performance remote control that allows you to turn the inverter ON/OFF from a distance without using the POWER SWITCH on the inverter itself, and it features LED displays for checking various statuses. 【Features】 ■ Buzzer sound 〇 Engine key operation terminal ■ Input voltage display 〇 Output power display ■ Overvoltage alarm lamp 〇 Low voltage alarm lamp ■ Overtemperature alarm lamp 〇 Overload alarm lamp ■ Power-saving mode display ■ The included remote control cable is approximately 7m long.

• Power generation equipment

The high-performance sine wave inverter "FI-SU603" automatically switches to inverter power (battery) when the supply from the AC power source is interrupted, allowing for continuous use. Once the AC power is restored, it switches back from inverter power to AC power. For more details, please download the catalog.

• Power generation equipment
• others

The high-performance sine wave inverter "FI-SU603" automatically switches to inverter power (battery) when the supply from the AC power source is stopped, allowing for continuous use. Once the AC power is restored, it switches back from inverter power to AC power. For more details, please download the catalog.

• Power generation equipment
• others

The high-performance sine wave inverter "FI-SU2503" automatically switches to inverter power (battery) when the supply from the AC power source is interrupted, allowing for continuous use. Once the AC power is restored, it switches back from inverter power to AC power. For more details, please download the catalog.

• Power generation equipment
• others

Compact and lightweight, easy to carry, equipped with AC 100V output as well as a USB output terminal. Comes with a cable with a cigarette plug for immediate use.

• Power generation equipment
• others

The high-performance sine wave inverter "FI-S353A" is a pure sine wave type inverter that can be used for a wide range of applications without restrictions on the devices used. It is relatively inexpensive compared to conventional models, offers high precision, and is extremely durable due to its solid-state design, ensuring high reliability. For more details, please download the catalog.

• Power generation equipment
• others

- Ultra-low standby current: Approximately 150mA, with very low power consumption in standby mode, making it suitable for automotive use. - High efficiency: Especially important for valuable batteries, it achieves approximately 90% efficiency in converting electricity. - Overload electronic protection: Automatically cuts off output when overloaded. (To reset, the power switch must be turned off and on again.) - Low noise: Significantly lower noise compared to conventional switching converters, allowing for use similar to standard power supplies without worrying about noise. - Slim design: Despite handling high current, it is compact and particularly thin. - Selected components: Uses high-performance components such as metal film resistors and glass-epoxy substrates, specifically selected for industrial use.

• Power generation equipment

○Ultra-low standby current: Approximately 40mA, with very low power consumption during standby, making it suitable for automotive use. ○High efficiency: Especially necessary to convert electricity efficiently in the case of precious batteries, achieving about 90% efficiency. ○Overload electronic protection: Automatically cuts off output in case of overload. (To restore, the power switch must be turned off and on again.) ○Low noise: Significantly lower noise compared to conventional switching converters, allowing use like a regular power supply without worrying about noise. ○Slim design: Despite high current, it is compact and particularly slim.

• Power generation equipment

- External control terminal: Remote control via engine key linkage or external contact switch. - High efficiency: It is particularly necessary to convert electricity efficiently in the case of valuable batteries, achieving approximately 90% efficiency. - Dual output: Equipped with multiple terminals for maximum 40A and 1A. (However, the total current must be used below 40A.) - Overload electronic protection: Automatically cuts off output when overloaded. (To reset, the power switch must be turned off and on again.) - Low noise: Significantly lower noise than conventional switching converters, allowing use without worrying about noise, similar to a regular power supply. - Automatic cooling fan: The fan starts when the case temperature exceeds a certain level and automatically stops when it falls below a certain temperature. - Slim design: Despite high current, it is compact and particularly slim. - Selected components: Uses high-performance components such as metal film resistors and glass-epoxy boards, specifically selected for industrial use.

• Power generation equipment

The battery charger "CH-1235AS" has the following features: 1. Large capacity with a maximum current of 35A 2. Wide operating temperature range, functioning down to -20°C 3. High efficiency and high reliability 4. Two types of bulk charging voltage and two types of float charging voltage can be set 5. FAN speed control mode 6. Optional remote control for turning output ON/OFF, changing FAN mode, and adjusting charging voltage based on temperature sensor readings

• Power generation equipment
• others

The high-performance, high-functionality DC-AC inverter "FI-SH2503R" supports parallel operation with multiple units, single-phase three-wire operation with two units, three-phase 200V operation with three units, and features a fast switching function with external AC, allowing for uninterrupted and comfortable use even during power outages. Additionally, custom configurations for three-phase parallel operation are also available.

• DC Power Supply

The battery charger "CH-1225AR" has the following features: 1. Maximum current of 25A 2. Wide operating temperature range, functioning down to -20°C 3. High efficiency, high reliability, and high functionality 4. Two types of bulk charging voltage and two types of float charging voltage can be set 5. FAN speed control mode 6. Remote ON/OFF output and FAN mode change via optional remote control, as well as charging voltage correction using a temperature sensor 7. Charging while using the load is possible through a short circuit of the main unit pins, forcing it into a float charging state, which minimizes the risk of overcharging.

• Power generation equipment
• others

The battery charger "CH-2415AR" has the following features: 1. Maximum current of 12.5A 2. Wide operating temperature range, functioning down to -20°C 3. High efficiency, high reliability, and high functionality 4. Two types of bulk charging voltage and two types of float charging voltage can be set 5. FAN speed control mode 6. Remote ON/OFF output and FAN mode change via optional remote control, with charging voltage correction using a temperature sensor 7. Charging while using the load is possible through a short circuit of the main unit pins, forcing it into a float charging state, which minimizes the risk of overcharging.

• Power generation equipment
• others

The battery charger "CH-1250AR" has the following features: 1. Maximum current of 50A 2. Wide operating temperature range, functioning down to -20°C 3. High efficiency, high reliability, and high functionality 4. Two types of bulk charging voltage and two types of float charging voltage can be set 5. FAN speed control mode 6. Remote ON/OFF output and FAN mode change via optional remote control, with charging voltage correction using a temperature sensor 7. Charging while using the load is possible due to the main unit's pin short, which forces it into a float charging state, minimizing the risk of overcharging.

• Power generation equipment
• others

The battery charger "CH-1280AR" has the following features: 1. Maximum current of 80A 2. Wide operating temperature range, functioning down to -20°C 3. High efficiency, high reliability, and high functionality 4. Two types of bulk charging voltage and two types of float charging voltage can be set 5. FAN speed control mode 6. Optional remote control for turning output ON/OFF, changing FAN mode, and adjusting charging voltage based on temperature sensor 7. Charging while using the load is possible due to the main unit pin short, forcing it into a float charging state, which minimizes the risk of overcharging.

• Power generation equipment
• others

The battery charger "CH-2425AR" has the following features: 1. Maximum current of 25A 2. Wide operating temperature range, functioning down to -20°C 3. High efficiency, high reliability, and high functionality 4. Two types of bulk charging voltage and two types of float charging voltage can be set 5. FAN speed control mode 6. Remote ON/OFF output and FAN mode change via optional remote control, as well as charging voltage correction using a temperature sensor 7. Charging while using a load is possible due to the main body pin short, forcing it into a float charging state, which minimizes the risk of overcharging.

• Power generation equipment
• others

The high-performance, high-functionality DC-AC inverter "FI-SH3503R" supports parallel operation with multiple units, single-phase three-wire operation with two units, three-phase 200V operation with three units, and features a fast switching function with external AC, allowing for uninterrupted and comfortable use even during power outages.

• DC Power Supply

The battery charger "CH-1205" is a compact and lightweight fully automatic battery charger that requires no maintenance. It automatically recovers from stops due to reverse connection protection, over-temperature protection, and overload protection. For more details, please download the catalog.

• Power generation equipment
• others

You can customize the inverter with remote power ON/OFF, various displays, and a variety of setting options.

• Power generation equipment

This is a remote control that allows you to turn the inverter ON/OFF from a distance without using the POWER SWITCH on the inverter itself.

• Power generation equipment