日本テスコン List of Products and Services

J Series MAX 315℃ Ultra High Temperature Flow Meter H Series MAX 204℃ High Temperature Flow Meter ◎ The high temperature flow monitor is a visual type flow meter. ◎ No electrical work is required, allowing for direct flow confirmation. ◎ Since no liquid flows in the scale area, reading the scale is easy. ◎ Scales are available for oil and water: For oil... Specific gravity: 0.873, For water... Specific gravity: 1.0 ◎ Installation orientation is flexible, both vertical and horizontal. ◎ Accuracy: ±2% F.S. ◎ Repeatability: ±1% F.S. ◎ Maximum operating pressure: MAX 42MPa (S), MAX 24MPa (A, B) ◎ Scale: For oil... DTE 25 @ 43℃, SG 0.873, For water... Water @ 21℃, SG 1.0 ◎ Compatible viscosity: MAX 110mm²/s ◎ Recommended filter size: 200 mesh ◎ Connection: NPT, BSPP, SAE ◎ Option: NIST traceable certificate Model: 1⃣2⃣3⃣-4⃣5⃣6⃣-7⃣-8⃣ 1⃣ Series J: MAX 315℃, H: MAX 204℃ 2⃣ Connection diameter 3: 1/4 to 1/2, 4: 3/4 to 1, 5: 1-1/4 to 2

• Other measuring instruments
• others

This document is the instruction manual for the KRAL AG manufactured screw meter "OMG Series," handled by Japan Tescon Co., Ltd. It describes the structure, operation, and maintenance. The technical specifications include an overview of "sensor temperature range and operating pressure," "model (size) capacity list," "pressure loss and operating time," and more. Additionally, it covers the installation and removal of the flow meter, as well as fault identification, verification, and handling. [Contents (excerpt)] ■ Equipment description ■ Technical specifications ■ Installation and removal of the flow meter ■ Operation ■ Maintenance *For more details, please refer to the PDF document or feel free to contact us.

• others

The "OMH Series" is a screw-type volumetric flow meter that supports up to 42 MPa. It is also referred to as a screw meter or helical gear meter. The movement of the rotating screw, driven by the flow of fluid, is detected by a pickup sensor and output as a pulse signal. Thanks to the precisely machined screw, it is minimally affected by changes in viscosity due to temperature variations in the fluid, allowing for high-precision measurements across a wide range. 【Features】 ■ Supports large flow rates (Max. 3,000 L/min) ■ High pressure compatibility (Max. 42 MPa) ■ Wide measurement range (up to 1:150) ■ Wide temperature range (-20 to +200℃) ■ High precision (±0.1% R.S.) ■ Low pressure loss and low noise design *For more details, please refer to the PDF document or feel free to contact us.

• others

The "TD900 series" is a high-precision flow meter that features high-speed calculations and high-speed output. It provides instantaneous flow output (±10VDC) for both forward and reverse flow, and in the case of the two-phase pulse input type, it can calculate pulse resolution at 1/4 through 4 times input. It outputs flow changes with remarkable realism, tracking variations during valve opening and closing, pump startup, changes in pump discharge flow due to servo motors and inverters, as well as pulsating flow from piston pumps. A CAN output is also available as an option. 【Features】 ■ High-speed analog output from 0.5ms ■ 2-channel analog output (W) ■ Simultaneous input/display for 2 units ■ Compliant with RoHS Directive ■ Front panel IP66 *For more details, please refer to the PDF document or feel free to contact us.

• others

When using an ATF/CVTF oil flow meter: ■ It cannot be guaranteed that the kinematic viscosity will remain below a certain level... ■ The viscosity decreases at high temperatures... Do you have any concerns regarding viscosity or temperature? The KRAL OMG series can measure with high precision even at high temperatures (low viscosity) compared to conventional gear meters. Therefore, it is hardly affected by changes in liquid viscosity due to temperature fluctuations. 【Examples of Applications】 ■ Fuels such as gasoline, diesel, kerosene, and heating oil ■ Oils such as hydraulic oil, lubricating oil, and ATF ■ Polyols and isocyanates as polyurethane raw materials ■ High-viscosity liquids such as inks, adhesives, sealants, PVC, and grease It can be used for almost all fluids other than water. *For more details, please contact us directly.

• Rock drills, demolition machines, and excavators
• Construction machinery leasing and rental
• Measurement and analysis equipment leasing and rental

The screw meter volumetric flow meter "OMG series" is a flow meter for liquids, designed with a structure that allows fluid to flow linearly. Compared to conventional gear-type meters, it significantly reduces pressure loss and lightens the load inside the flow meter. The measurement accuracy is very high at ±0.1 RS, making it suitable for use as a flow standard. It can measure a wide range of fluids, including high-viscosity liquids such as adhesives, sealants, PVC, and polyols, as well as low-viscosity fuels like gasoline, diesel, and kerosene. Additionally, with a variety of pickup sensors, it can accommodate a temperature range of -40 to 200°C. 【Do you have any of these concerns?】 - The data during high-temperature tests is not good, making accurate measurement impossible. - It breaks down quickly within 3 to 5 years at high temperatures, necessitating replacement. - High pressure loss at low temperatures makes measurement impossible. - The pressure loss is too high. - I want to measure high-viscosity fluids like grease, adhesives, and sealants. *For more details, please download the catalog or contact us directly.

• Bridge Construction
• Drilling Machine
• Rock drills, demolition machines, and excavators

The "OMP Series" screw meter volumetric flow meter (for liquids) is a new series that has achieved a lower price based on the "OMG Series." It has specifications equivalent to the "OMG Series," but with limited model sizes, temperature ranges, and pressure ranges. However, the measurement accuracy is the same as the "OMG Series," with a very high precision of ±0.1RS, making it suitable for use as a reference instrument or secondary standard. It can measure a variety of fluids, including high-viscosity liquids such as adhesives, sealants, PVC, and polyols, as well as low-viscosity fuels like gasoline, diesel, and kerosene. 【Do you have any of these concerns?】 - The data during high-temperature tests is poor, making accurate measurement impossible. - They break down quickly within 3 to 5 years due to high temperatures, necessitating replacement. - I want to measure high-viscosity fluids such as grease, adhesives, and sealants. *For more details, please download the catalog or contact us directly.

• Bridge Construction
• Drilling Machine
• Rock drills, demolition machines, and excavators

The screw meter volumetric flow meter "OMG series" has a structure that allows fluids to flow in a linear manner, resulting in significantly lower pressure loss compared to conventional gear-type meters, and reduces the load inside the flow meter. The measurement accuracy is very high at ±0.1 RS, making it suitable for use as a flow standard. It can measure a wide range of fluids, including high-viscosity liquids such as adhesives, sealants, PVC, and polyols, as well as low-viscosity fuels like gasoline, diesel, and kerosene. Additionally, with a rich selection of pickup sensors, it can accommodate a temperature range of up to -40 to 200°C. 【Do you have any of these problems?】 - The data during high-temperature tests is poor, making accurate measurement impossible. - It breaks down quickly within 3 to 5 years due to high temperatures, necessitating replacement. - I want to measure high-viscosity fluids like grease, adhesives, and sealants.

• Bridge Construction
• Drilling Machine
• Rock drills, demolition machines, and excavators

The KRAL OMG series features a screw-type (helical gear) structure that allows fluid to flow linearly, resulting in significantly lower pressure loss compared to conventional gear meters (circular gear type), and enables high-precision measurement of ±0.1% R.S. The flow meter is calibrated at 5 mm²/s, allowing for high-precision measurements even at high temperatures (low viscosity) compared to circular gear meters. Therefore, it is hardly affected by temperature changes (changes in liquid viscosity). It can be used for a wide range of fluids, including fuels such as gasoline, diesel, kerosene, and heating oil, as well as hydraulic oils, lubricants, ATF, and oils, as well as urethane raw materials like polyols and isocyanates, inks, adhesives, sealants, PVC, greases, and other high-viscosity liquids, essentially for almost all fluids except water. High-precision measurement of ±0.1% R.S. is possible due to the precisely machined spindle. Direction detection (forward/reverse) is also available as an option. ◎ Specifications ◎ Operating pressure: MAX 25 MPa Viscosity range: 1 to 1,000,000 mPas Measurement accuracy: ± 0.1% R.S. Temperature range: -40 to +200°C (Varies depending on the type of pickup sensor)

• Rock drills, demolition machines, and excavators
• Construction machinery leasing and rental
• Measurement and analysis equipment leasing and rental

The 44-1100 series is a high-pressure pressure reducing valve capable of reducing pressure up to 68.9 MPa to a maximum of six adjustable pressure ranges below 41.3 MPa. It allows for easy adjustment of the range by exchanging internal components within a single unit. This regulator comes standard with a built-in vent valve, allowing for the release of pressure from closed piping systems through the pressure reducing valve. There is also a non-vent option available for flammable gases and liquids. *For more details, please download the catalog or contact us directly.*

• Other measuring instruments
• others

- We provide products that comply with the High-Pressure Gas Safety Act (KHK certification)!! - Excellent quietness and low vibration performance allow for flexible installation locations. - A wide variety of options to choose from based on your application. - Widely used for respiratory equipment, pressure and performance testing of automotive brake components, etc. - We handle applications to the prefecture after installation, as well as piping work and control components! - Our domestically produced compressors ensure quick after-service response. We conduct open inspections in accordance with domestic regulations. - A variety of options to enhance operability and safety.

• others

The 44-1300 series is a pressure reducing valve that can safely reduce pressure from up to 31.0 MPa to below 10.3 MPa at a high flow rate. It features a partition plate built into the lower part of the sensor, preventing hunting, and stable secondary pressure is achieved through a balanced main valve. This regulator comes standard with a vent valve that allows pressure relief in a closed piping system. There is also a non-vent option available for hydraulic systems. *For more details, please download the catalog or contact us directly.*

• Other measuring instruments

The 26-1700 series is a piston-type back pressure valve for high pressure applications. The back pressure valve has a function similar to that of a safety valve and can also be used as a safety valve in applications that require highly sensitive control with minimal difference between blowing out and stopping. This regulator has seven types of primary pressure adjustment ranges, and the adjustment range can be easily changed by replacing internal components in a single unit. *For more details, please download the catalog or contact us directly.

• Other measuring instruments

Designed for high-pressure liquids or gases, it features a capture vent for easy pressure adjustment. There are three types: Eppling Road type, Dome Road type, and air actuators, with options for soft seats and metal-to-metal seats. The standard model comes with a 40-micron filter (soft seat model) for long-lasting performance. A high flow type with Cv = 0.3 is also available. It is recommended to be used with the Escom electronic PID controller. *For more details, please download the catalog or contact us directly.

• Other measuring instruments

The 54-2000 series is a pressure reducing valve for high pressure, low flow liquids. For the seat, 17-4 stainless steel is used, and for the main valve, tungsten carbide is utilized. This pressure reducing valve has a built-in venting mechanism, allowing the fluid downstream of the valve to be released through the vent port. *For more details, please download the catalog or contact us directly.*

• Other measuring instruments

The high-pressure liquid back pressure valve "54-2100 Series" is a piston-type back pressure valve for high-pressure liquids. The back pressure valve has functions similar to those of a safety valve and can also be used as a safety valve in applications that require high sensitivity control with minimal difference between blowout and stop. This regulator has eight types of primary pressure adjustment ranges, and the adjustment range can be easily changed by replacing internal components in a single unit. *For more details, please download the catalog or contact us directly.*

• Other measuring instruments

Balanced poppet design offers high reliability and excellent durability. Large flow capacity: Cv = 0.75 or Cv = 2.0, suitable for gas and liquid applications, normally open or normally closed. Made of brass or stainless steel 316, low operating pressure: 0.41 MPa (minimum). High pressure: up to 41.38 MPa (brass) and up to 68.97 MPa (stainless steel). A 103.45 MPa version is also available. *For more details, please download the catalog or contact us directly.

• Other measuring instruments

The Tescom ER5000 series is an electronic pressure regulator that incorporates a PID controller. In addition to being used as a standalone pressure reducing valve, it can be combined with various Tescom pressure regulators to control pressures from liquids, gases, and vacuum environments up to a maximum of 110 MPa, making it suitable for a wide range of applications. Pressure settings can be made via analog signals (4-20 mA / 1-5 V) or through USB and RS-485 from a computer. It comes with dedicated software for setting PID parameters, programming operations, and monitoring SP and PV values (compatible with Windows 7 and 8). *For more details, please download the PDF or feel free to contact us.*

• Other measuring instruments

This load cell is primarily used when there is no installation space available. Despite its small size, it can be manufactured to handle high capacities and provides high precision and stable measurements. Changes to the external dimensions are also possible, and it is widely used in applications such as coverings, ergonomics, and robotics.

• Other measuring instruments

It is a high-quality general-purpose load cell with a wide load range. It is low-priced and high-quality. *For more details, please download the catalog or contact us directly.

• Other measuring instruments

The TCF is designed for torque detection within 1 to 3 rotations (without the cable getting tangled) with stationary or slow rotation, rather than continuous rotation. It is low-cost due to the absence of slip rings, allowing for high precision and stable measurements across a wide range from low to high torque. It can accommodate not only double-sided flanges but also keyway round shafts and custom machining as specified. It is used for performance testing of air drivers, electric screwdrivers, torque testing of automotive parts, and in robotics. *For more details, please download the catalog or contact us directly. *For alternatives to the TCF non-rotating torque converter, please contact us.

• Other measuring instruments

Due to the use of a flush diaphragm on the pressure receiving surface, the converter has no pressure volume and boasts high responsiveness. It is even smaller than the PHC type and is made of special stainless steel, making it sufficiently resistant to corrosion.

• Other measuring instruments

The impeller rotates due to the pressure of the fluid, and a non-contact pickup sensor detects the movement of the blades and outputs pulses. The rotation count is proportional to the cumulative flow, and the rotational speed is proportional to the instantaneous flow.

• Other measuring instruments

The impeller rotates due to the pressure of the fluid, with the rotation speed proportional to the accumulated flow rate and the rotational velocity proportional to the instantaneous flow rate. A non-contact pickup sensor detects the movement of the blades and outputs pulses. While gear flow meters have a wider measurement range with higher viscosity, turbine flow meters can utilize their measurement range better with lower viscosity.

• Drilling Machine

The maintenance of the cleaning agent is an economical and simple method that only involves replacing the cleaning agent. You can choose the optimal cleaning agent according to your needs, such as activated carbon, activated alumina, or synthetic zeolite. Leave the installation, piping work, and high-pressure gas application to us.

• others

We will design and manufacture pressure vessels and accumulators in accordance with the High-Pressure Gas Safety Act, along with the specific equipment inspection certificate based on SUS304. We also provide support for installation, piping, and applications as per your requests. Please leave regular inspections such as open inspections and thickness measurements to us.

• others

Adamant Valve Company is a company established in Irvine, California, USA. The company has grown globally as a manufacturer of sanitary valves, producing high-precision stainless steel sanitary valves, pumps, and pipe fittings. To this day, they are used in various industries such as food, beverage, pharmaceuticals, and cosmetics. The angle seat valve features a structure that is strong against water hammer. It is a valve suitable for large flow rates with minimal troubles, and in the event of a leak issue, maintenance can be performed by replacing the actuator and seat components without removing it from the piping. There is a wide variety of connection standards available, including Rc threads, NPT threads, G threads, flanges, and welding, with sizes ranging from 3/8 to 2-1/2. Additionally, types with indicators are also available.

• pump
• Drainage and ventilation equipment
• Other measuring instruments

The screw meter volumetric flow meter "OMP Series" is a new series that has achieved a lower price based on the "OMG Series." It has specifications equivalent to the "OMG Series," but the model sizes, temperature ranges, and pressure ranges are limited. However, the measurement accuracy is the same as the "OMG Series," with a very high precision of ±0.1RS, making it suitable for use as a reference instrument or secondary standard instrument. The compatible fluids include not only high-viscosity liquids such as adhesives, sealants, PVC, and polyols but also low-viscosity fuels such as gasoline, diesel, and kerosene. 【Do you have any of these concerns?】 - The data during high-temperature tests is poor, making accurate measurement impossible. - They break down quickly within 3 to 5 years due to high temperatures, necessitating replacement. - I want to measure high-viscosity fluids like grease, adhesives, and sealants. *For more details, please download the catalog or contact us directly.

• Bridge Construction
• Drilling Machine
• Rock drills, demolition machines, and excavators

This is a high-pressure flow meter compatible with MAX 42 MPa. (*For 63 MPa compatibility, please contact us for details.) Connections include SAE, DIN, G (BSPP), and others. Compared to conventional gear meters, it has lower pressure loss, which can help reduce power consumption for motors and other equipment. It is widely used, especially for performance testing of high-pressure hydraulic equipment and cylinder position detection in tunnel boring machines. It can accommodate a wide range of fluids, from high-viscosity liquids such as adhesives, sealants, PVC, inks, and polyols to low-viscosity liquids like gasoline and diesel. There are two types of traceability options: (1) ISO/IEC 17025 calibration (equivalent to JCSS) (This does not include system diagrams or calibration certificates.) (2) Attach documents such as test reports, calibration certificates, and system diagrams. *For details, please contact us. Calibration is performed at approximately 5 mm²/s (equivalent to diesel oil).

• Bridge Construction
• Other civil engineering works
• Prime movers, torque converters, hydraulic equipment, generators