カメダデンキ　 List of Products and Services

The "Compact LED Panel Lighting" is a product that brightly illuminates the inside of control panels and power distribution panels. Since the LED tubes are replaceable, maintenance can be easily performed. Additionally, it features a wide beam angle of 300°, making it a bright linear LED. We offer models with lead wires "KCL-101SE," with connectors "KCL-C101SE," and with terminal blocks "KCL-T101SE." 【Features】 ■ Emits almost no ultraviolet light, so it does not attract insects ■ Voltage-free specification of AC100-240V allows for installation without selecting a power source ■ Complies with CISPR15, resulting in low noise and minimal impact on surrounding electronic devices ■ Designed specifically for installation inside panels *For more details, please refer to the PDF document or feel free to contact us.

• Other lighting fixtures

The "Compact LED Panel Lighting" is a product that brightly illuminates the inside of control panels and power distribution panels. Since the LED tubes are replaceable, maintenance can be easily performed. Additionally, it features a wide beam angle of 300° and is a bright linear LED. We offer models with lead wires "KCL-101SE," with connectors "KCL-C101SE," and with terminal blocks "KCL-T101SE." 【Features】 ■ Emits almost no ultraviolet light, so it does not attract insects ■ Voltage-free specification of AC100-240V allows for installation without selecting a power source ■ Complies with CISPR15, resulting in low noise and minimal impact on surrounding electronic devices ■ Designed specifically for installation inside panels *For more details, please refer to the PDF document or feel free to contact us.

• Other lighting fixtures

The "VT-250 type" is a vent loop with smooth edges and reliable barrel processing. The standard specification uses a knurled nut for the filter fastener. It can be easily attached and detached, making maintenance and replacement simple. Additionally, the IP45 specification features a blow-in prevention structure, allowing for outdoor use, while the IP55 salt damage prevention specification has a special three-layer structure, resulting in an extremely low re-suspension rate of 0.1-0.7%. 【Features】 <Standard Specification> ■ The rear hood is integrated with the mounting frame for easy maintenance. ■ The mesh fastening nut is a knurled nut (brass, nickel-plated). ■ Made of stainless steel. ■ The steel plate is treated with cationic electrodeposition coating up to the stud bolts, making it resistant to rust. *For more details, please refer to the PDF document or feel free to contact us.

• Drainage and ventilation equipment

We would like to introduce the ventilation louvers 'VT-350/VT-500 type' that we handle. The IP45 specification allows for outdoor use due to its back hood with a blow-in prevention structure. The pre-filter set can be easily attached and detached, making maintenance and replacement a breeze. The IP55 salt damage prevention specification features a special three-layer mesh structure, resulting in an extremely low re-suspension rate of 0.1% to 0.7%, effectively preventing the intrusion of salt into the interior. 【Features of IP45 Specification】 ■ Back hood with blow-in prevention structure ■ Usable outdoors ■ Coated with galvanic electrophoretic paint up to the stud bolts, making it resistant to rust ■ Compliant with RoHS *For more details, please refer to the PDF document or feel free to contact us.

• Drainage and ventilation equipment

The "WFA Series" is an aluminum window frame for inspection of high-voltage receiving equipment (cubicles) and distribution boards. It features a powder-coated finish that offers excellent corrosion resistance, with a slim and beautiful design. Installation is easy, requiring only the tightening of nuts from the back. It is waterproof due to the rubber gasket that seals it. Additionally, the edges of the wired glass are treated for rust prevention. 【Features】 ■ Powder-coated finish for excellent corrosion resistance, with a slim and beautiful design ■ Waterproof due to the rubber gasket seal ■ Easy installation by simply tightening nuts from the back ■ Edges of the wired glass are rust-treated ■ Optional UV-cut film specification (3M/SH2CL) is also available *For more details, please refer to the PDF document or feel free to contact us.

• Window and shutter openings

The "ES Spacer Flame Retardant" is a product that can be used as an insulating base for mounting equipment such as distribution boards, sub-distribution boards, and control panels, as well as for insulating support for busbar connections and wiring. There are two types available: double-sided nuts and bolt-nut combinations. It has excellent insulation properties. Additionally, the material is P.P. (polypropylene), and the insert nuts and bolts are made of environmentally friendly iron with a trivalent chrome plating finish. 【Features】 ■ Available in two types: double-sided nuts and bolt-nut combinations ■ Flame retardant grade UL94-V0 standard ■ Excellent strength, durability, and insulation properties *For more details, please refer to the PDF materials or feel free to contact us.

• Wiring devices

We would like to introduce our "LED panel lighting" that we handle. These are simple, lightweight, and low-cost products available in trough-type fixtures for both 10-type and 20-type, designed to match common design drawings. They have a wide beam angle of 300° and bright linear LEDs. Additionally, they emit very little ultraviolet light, which prevents insects from being attracted, and you can also choose fixtures with terminal blocks as optional parts. 【Features】 ■ Set model numbers for fixtures and linear tubes are available for individual purchase ■ Voltage-free specification of AC100-240V allows for installation without selecting a power source ■ Almost no noise, with no impact on surrounding electronic devices ■ For indoor use only ■ RoHS compliant *For more details, please refer to the PDF materials or feel free to contact us.

• System lighting and lighting control

We would like to introduce our ventilated louver, the 'VT-250 type'. The standard specification uses knurled nuts for the filter fasteners. The IP45 specification allows for uniform coating thickness and, after baking, possesses very high rust resistance due to a method called "cationic electrophoretic painting." Additionally, the IP55 salt damage prevention specification features a special three-layer mesh structure. We also offer the "VT-350 type" and "VT-500 type." 【Features】 <Standard Specification> ■ Mesh fastening nuts are knurled nuts ■ Made of stainless steel ■ Wide opening area ■ Smooth barrel treatment on the edges *For more details, please refer to the PDF document or feel free to contact us.

• Drainage and ventilation equipment

We would like to introduce the multi-angle 'L-40W-ZN-3.0' that we handle. The surface treatment is hot-dip galvanized. The specifications for the plating are JIS H 8641, with two types 45, and the symbol is HDZ45. It can be used for solar panel frames and piping work. Additionally, we also offer a room temperature drying type "Plated Silver." Please feel free to contact us if you have any requests. 【Specifications (partial)】 ■ Material: Steel ■ Surface treatment: Hot-dip galvanizing ■ Total length: 3000mm ■ Width: 40mm ■ Plate thickness: 3.2mm *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials

We would like to introduce the multi-angle 'L-40WP-UN-2.5' that we handle. It is convenient for plumbing, electrical work, air conditioning installation, and the fabrication of frames and shelves. There are markings every 50mm, making it easy to understand the dimensions. Additionally, we also offer an excellent "angle cutter" for ease of use. Please feel free to contact us if you have any requests. 【Specifications (partial)】 ■ Material: Steel ■ Surface treatment: Unichrome ■ Total length: 2500mm ■ Width: 40mm ■ Plate thickness: 3.2mm x 40mm *For more details, please refer to the PDF document or feel free to contact us.

• Piping and electrical wiring materials

The "DA-401" is a reinforced DIN rail made of aluminum alloy with an anodized finish. Its unique shape provides high torsional strength, ensuring stability even when used as a long piece. This product can be used as a base on its own, reducing the number of components, improving component management, and enhancing cost performance in work processes. 【Features】 ■ Allows for the mounting of various components by using AC bases or NF bases ■ High torsional strength due to its unique shape ■ Remains stable even when used as a long piece *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials

The "NS-5T" is a corner nut that complies with RoHS standards. It allows for free positioning when installing wiring ducts and small parts. A companion nut has been created for the convenient LK Kanagu and HK Kanagu. Additionally, we offer various types such as "LK Kanagu LK-8" and corner nuts "NO-8B・NO-10B." Please feel free to contact us if you have any requests. 【Features】 ■ RoHS compliant ■ Prevents free spinning by fitting the protrusion * For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials

We would like to introduce the corner brackets for L-40 type angles, the "UN-40AC series," which we handle. By attaching adjusters, you can freely adjust the height of platforms or shelves, and eliminate wobbling on uneven floors. Additionally, by attaching casters, you can easily move the platforms or shelves. 【Features】 ■ Height adjustment with adjusters, accommodating floor height differences ■ Freedom of movement with casters, allowing various creative uses ■ RoHS compliant *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials

"The plating and materials of multi-angle channels" is a technical document included in "Kameda Electric Co., Ltd. Comprehensive Catalog No. 13." We introduce electro-galvanized plating, hot-dip galvanized plating, and plated steel sheets. The material of the multi-angle channel is iron. To prevent the surface of the iron from rusting, it is coated with zinc plating that has good adhesion to iron. Zinc also becomes oxidized on the surface, turning white and losing its luster. To prevent this and maintain a beautiful shine while enhancing corrosion resistance, chromate treatment is applied. For more detailed information, please download and view the related catalog. [Contents] ■ Electro-galvanized plating ■ Hot-dip galvanized plating ■ Plated steel sheets ■ Stainless steel *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "Duct and Mould Cutter" that we handle. The "KC-100" has a long blade, making it easy to cut ducts that are 100mm wide or 100mm deep. There is a groove on the blade holder side that accommodates ducts with depths of 40mm, 60mm, 80mm, and 100mm. In addition, we also offer the "DX-80," which can cut at a 45° angle, and the "SX-10," which is suitable for cutting smaller ducts, communication moulds, and electrical wires. 【Features】 <KC-100> ■ The long blade allows for easy cutting of ducts that are 100mm wide or 100mm deep. ■ The groove on the blade holder side prevents the duct from slipping and keeps it fixed for easier cutting. ■ This groove fits ducts with depths of 40mm, 60mm, 80mm, and 100mm. ■ Total length: 270mm, Blade length: 115mm. *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Work tools

The "Duct Nipper" is a tool used to cut the pillar part of the wiring duct side hole to create a large opening. The "DNK-100" allows for easy cutting with minimal force due to its power multiplication mechanism. The cut surface is burr-free and safe, and it features a spring, so there is no need to return the handle manually. Additionally, we also offer the "DK-55/65," which makes opening ducts easy, so please feel free to contact us. 【DNK-100 Specifications】 ■ Overall Length: 327mm ■ Weight: 460g ■ Blade Width: 18.5mm ■ Depth: 96mm *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Work tools

The 'DAC Series' we handle is a lightweight and compact cutter specifically designed for DIN rails. The cutting position is visible from above, allowing you to confirm the cut line drawn on the rail, making the work easy and safe. Additionally, the cutting blade die is removable, enabling sharpening. It can cut the Kameda DIN rails DA-14 and DA-15 series, as well as aluminum DIN rails of the same shape. Please feel free to contact us when you need assistance. 【Features】 ■ Excellent cutting performance ■ Ability to confirm the cut line drawn on the rail ■ Easy and safe operation ■ Removable cutting blade die ■ Scale available (sold separately) *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools
• Work tools

The "COS Sleeve Compression Method" is a compact construction technique that excels in seismic performance and energy-saving effects, increases the tension of the core wire, and enhances mechanical strength. The 'COS Sleeve' allows for easy installation with a one-two-three approach. The connection point becomes thicker than the wire itself, resulting in lower resistance and reduced heat generation. It can be used with devices that connect stranded wires, such as smart meters, cumulative power meters, circuit breakers, and inverters. 【Features】 ■ Domestic ferrules ■ Improved electrical performance ■ Enhanced mechanical strength ■ Space-saving ■ Increased work efficiency *For more details, please refer to the PDF document or feel free to contact us.

• others

"Edging CE" is used to protect the edges of steel plates and other panels. It can be used for panels equivalent to size B. Additionally, it is made of nylon 6, which offers excellent corrosion resistance, wear resistance, and electrical insulation. Please feel free to contact us when you need assistance. 【Features】 ■ RoHS compliant ■ Used for protecting the edges of steel plates and other panels ■ Usable for panels equivalent to size B ■ Made of nylon 6 *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices
• Safety and consumables

The "Grommet KSG" is a highly economical wire protection material due to its long length. It can be used for various shapes and sizes of holes in panels, chassis, covers, etc., with a thickness of 1.2 to 3.2 mm. Please feel free to contact us when you need it. 【Features】 ■ RoHS compliant ■ Installed on the cut edges of panels to protect wires ■ Highly economical due to its long length ■ Usable for various shapes and sizes of holes *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices
• Safety and consumables

The "Free Bush KG" is a product that is installed on the cut surface of a panel to protect electrical wires. It can be cut to fit around the hole, allowing it to accommodate various hole diameters, and it can be freely used for square or irregularly shaped holes. For larger holes, it can also be extended for use. Please feel free to contact us when you need it. 【Features】 ■ Installed on the cut surface of the panel to protect electrical wires ■ Accommodates various hole diameters ■ Can be extended for use with larger holes ■ Excellent electrical insulation and abrasion resistance *For more details, please refer to the PDF materials or feel free to contact us.

• Wiring devices
• Safety and consumables

We would like to introduce our insulation protective material, the "Terminal Protection Cover." This product protects terminals of relays and other devices mounted on DIN rails, and it features guide lines for easy hole drilling. Please use it in combination with the separately sold mini clamps "S-19-20" and "S-19-35." 【Specifications】 ■Material: Acrylic ■Size: 37×1040×2t ■Sales Unit: 10 pieces *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• others

The "Button Tube KOP" is a binding protection material that opens and closes with snap buttons. It is a reversible type that can be used in either black or gray. No tools are required; it can be bound with a single touch, making specification changes and inspections easy. It comes wound on a reel and packed in a compact box for easy handling, and it does not wrinkle. Additionally, it can be cut to the required length, making it economical and waste-free. 【Features】 ■ Opens and closes with snap buttons ■ No tools required, can be bound with a single touch ■ Wound on a reel and packed in a compact box ■ Can be cut to the required length, making it economical and waste-free *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

The "Corrugated Tube (with Slits)" is a highly flexible product designed for the protection and bundling of various wire harnesses and wiring. It is lightweight and flexible yet durable and resistant to crushing, ensuring reliable protection for electrical wires. The slits (cuts) are processed in the extension direction, making it easy to store wires. Additionally, we also provide a "Corrugated Tube Jig." 【Features】 - Lightweight and flexible yet durable and resistant to crushing - Slits (cuts) allow for easy storage of wires - Available in a wide range of sizes, in small and large boxes - Heat-resistant and has self-extinguishing properties, extinguishing flames within 30 seconds *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

We would like to introduce our binding protection material, "Nylon Spiral KSN." It is made of nylon 6, which has excellent heat resistance and flame retardancy compared to polyethylene. The operating temperature is -30°C to +105°C (for reference). Please feel free to contact us if you have any inquiries. 【Specifications】 ■Material: Nylon 6 UL94-V2 ■Colors - Natural (milky white) - Black ■Operating temperature: -30°C to +105°C (for reference) *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

We would like to introduce our binding protection material, the "Spiral Tube KS." This product is a flexible (thin-walled) type, available in large diameters up to 50φ. We offer colors in natural and black. Please feel free to contact us when you need it. 【Specifications】 ■ Material: Polyethylene ■ Colors - Natural (milky white) - Black ■ Operating temperature: -25℃ to +50℃ (reference value) *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

The "Spiral Tube KSS" is a product designed to wrap around and protect electrical wires. It beautifully protects areas such as bends in wire bundles, door crossing wires, and inter-panel crossing wires, and can be installed quickly with low labor costs. Additionally, wires can be extracted from any position, and the black version is weather-resistant, making it suitable for outdoor use. 【Features】 ■ RoHS compliant ■ Wraps around and protects electrical wires ■ Can be installed quickly with low labor costs ■ The black version is weather-resistant, suitable for outdoor use *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

We would like to introduce our wiring fixture, "High Sticker K." It is convenient for screwing small parts in places where holes cannot be drilled, such as behind doors. Made of durable steel plate, it allows for stable installation. The screw size is M4. 【Features】 ■ RoHS compliant ■ Usable in places where holes cannot be drilled, such as behind doors ■ Screw size is M4 *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

The "Coating High Sticker" is a wiring fixture that adds insulation to the ease of use of metal stickers. It gently holds wires in place without slipping, making it ideal for LAN cables and optical cables. Even if it falls within a control panel, it is safe because the metal parts are not exposed. Additionally, the double-sided tape comes in two types: a strong white (M) and a weather-resistant black (GN). 【Features】 ■ Adds insulation to the ease of use of metal stickers ■ Gently holds wires in place without slipping ■ Safe as metal parts are not exposed ■ Double-sided tape available in strong white (M) and weather-resistant black (GN) *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

We would like to introduce our wiring fixture, the "Stainless High Sticker." It is resistant to rust and can be used in outdoor and humid environments. It is suitable for internal wiring in refrigerated showcases, vending machines, and more. Please feel free to contact us if you need assistance. 【Features】 ■ RoHS compliant ■ Rust-resistant ■ Usable in outdoor and humid environments ■ Ideal for internal wiring in refrigerated showcases, vending machines, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

"High Sticker" is an adhesive wiring fixture that excels in various fields with its excellent adhesive strength. The double-sided tape uses top-quality tape. It can be safely used on a wide range of materials including steel, aluminum, plastic, glass, and wood. Please feel free to contact us when you need assistance. 【Features】 ■ RoHS compliant ■ Uses top-quality tape for double-sided tape ■ Can be safely used on a wide range of materials including steel, aluminum, plastic, glass, and wood ■ Excels in various fields with its excellent adhesive strength *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

This product is a vinyl cord for bundling electric wires. It is a RoHS-compliant product made from high-quality materials that are both stretchy and strong. The strong cord (white) is an electric wire bundling cord coated with nylon twisted yarn. Additionally, the pack race is housed in a plastic case to ensure that the mono flat does not tangle and can be used until the end. 【Features】 ■ Vinyl race (mono flat) - RoHS compliant - Made from high-quality materials that are both stretchy and strong ■ Strong cord (white) - Electric wire bundling cord coated with nylon twisted yarn ■ Pack race - Housed in a plastic case to prevent the mono flat from tangling and to allow for use until the end *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

"Vinibar" is a binding band coated with PVC on aluminum. It is a durable, corrosion-resistant, and insulating binding band made from high-quality aluminum with a purity of over 99.5%, which shows little change over time and can withstand long-term use. With thicknesses ranging from 0.5 to 1.0 mm and widths from 6 to 20, we offer a variety of options suitable for light to heavy loads. [Features] ■ It has considerable durability against outdoor UV rays, temperature changes, toxic gases, salt damage, high humidity, vibrations, etc. ■ The material has an appropriate balance of softness and hardness. ■ We offer a range of options from light to heavy loads (thicknesses of 0.5 to 1.0 mm and widths of 6 to 20). *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

This product is an adhesive fixture for securing nylon cable ties. There are two types of adhesive tape available, white and black, which can be used according to the application. The main body is made of nylon, offering excellent strength, durability, and other characteristics. 【Features】 ■ Adhesive fixture for securing nylon cable ties ■ The main body is made of nylon, providing excellent strength, durability, and other characteristics ■ There are two types of adhesive tape available, white and black, which can be used according to the application *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

This product is a "vinyl tube" for wire protection insulation and marking tubes. It has a lead content of 0%, considering the environment. Please use P90 or hot markers for printing on the tube. Feel free to contact us when you need assistance. 【Features】 ■ RoHS compliant ■ Tube with 0% lead content, considering the environment ■ Material: Soft PVC ■ Please use P90 or hot markers for printing on the tube *For more details, please refer to the PDF materials or feel free to contact us.

• Power distribution and control panels

The "Quick Name Tag" is a fiber-made display name tag. It can be quickly attached with a zipper. Once attached, it cannot be removed, so there is no risk of losing it. Additionally, the head of the zipper can be slid sideways to remove the tag, allowing for adjustments or corrections if necessary. 【Features】 ■ RoHS compliant ■ Can be written on with a marker or permanent ink and attached to displays ■ Quick attachment is possible due to the zipper ■ Once attached, it cannot be removed, eliminating the risk of loss ■ The head of the zipper can be slid sideways to remove the tag ■ Can accommodate changes or corrections if needed *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

The "Line Name Tag FD FM" is a fiber-made display name tag. You can choose a tag size that fits the display item. Write the display name on the tag part with a marker or indelible ink, and attach it to the display item. 【Features】 ■ RoHS compliant ■ Choose a tag size that fits the display item ■ Long service life ■ Material: Tag…strong fiber, line thread…octopus thread (length approximately 11cm) *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

This product is a display acrylic nameplate (for back engraving). Type P is a nameplate material for push-button switches. It is compliant with RoHS. Please choose a shape suitable for your application from the standard P type or the wide PW type. 【Features】 ■ RoHS compliant ■ Type P is a nameplate material for push-button switches ■ Shape can be selected according to application (standard P type, wide PW type) ■ Material: Acrylic ■ Standard color: White *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

This product is a material for engraving display nameplates. It has been coated with a double-layer baked paint, so wiping after coloring is unnecessary. By engraving from the back and adding color, you can create a beautiful nameplate. 【Features】 ■ RoHS compliant ■ Coated with double-layer baked paint ■ No wiping required after coloring ■ Uses newly developed baked paint, resulting in less cutter wear and improved engraving efficiency *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

This product is a card holder name paper that can be printed using a computer. You can freely choose the font and text size, and continuous data can be easily entered with a fill. It is A4 size, so it can be printed with a computer. Additionally, it has micro-perforations, making it easy to cut out. 【Features】 ■ RoHS compliant ■ A4 size, can be printed with a computer ■ Easy to cut out due to micro-perforations ■ Material: Inkjet-compatible Kent paper, white *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

This product is a vertical-opening hinge-type card holder with an integrated cover and base. Thanks to the hinge lock mechanism that prevents the cover from falling off, it will not open on its own. Additionally, there is a dedicated name paper ISY-5 (sold separately) that can be printed using a computer. 【Features】 ■ RoHS compliant ■ Hinge lock mechanism prevents the cover from falling off and ensures it does not open on its own ■ Non-woven double-sided tape leaves no adhesive residue on the surface when removed (reapplication is not possible) ■ The polyethylene foam tape is thick and excellent for initial adhesion ■ There is also a dedicated name paper ISY-5 (sold separately) that can be printed using a computer *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

This product is a horizontally opening hinge-type card holder with an integrated cover and base. The non-woven double-sided tape does not leave adhesive residue on the surface when removed. Additionally, the CSY-5-CT comes with 10 consecutive pieces on one sheet, making the work very easy and quick. 【Features】 ■ RoHS compliant ■ The non-woven double-sided tape does not leave adhesive residue on the surface when removed (reapplication is not possible) ■ Comes with 10 consecutive pieces on one sheet, making the work very easy and quick (CSY-5-CT) ■ The polyethylene foam tape is thick and excellent for initial adhesion ■ There is also a dedicated labeling paper ISY-5 (sold separately) that can be printed on a computer *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

This product is a nameplate for adhesive-type distribution board circuits, etc. It uses strong adhesive tape, so there is no need for drilling holes, and the card is sealed, preventing it from getting dirty or falling off. Additionally, the polyethylene foam tape is thick and excels in initial adhesion. 【Features】 ■ RoHS compliant ■ The cover is made of AS resin, providing good transparency ■ Comes with name paper, and printing from a computer is possible using a separately sold dedicated name sheet ■ The non-woven double-sided tape does not leave adhesive residue on the surface when removed * Reapplication is not possible ■ The polyethylene foam tape is thick and excels in initial adhesion * For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

We would like to introduce our product, "Bake Supporter CX." It is RoHS compliant and has a heat distortion temperature of 150°C, making it highly resistant to heat. The material is phenolic resin, and the sales unit is 50 pieces. Please feel free to contact us if you have any inquiries. 【Specifications】 ■ Material: Phenolic resin (Bakelite) ■ Color: Brown ■ Sales unit: 50 pieces *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

This product is a "stainless steel supporter" for supporting parts and height adjustment. Made of durable and beautiful stainless steel. The material is SUS303 (stainless steel) and has undergone degreasing treatment. Please feel free to contact us when you need assistance. 【Features】 ■ For supporting parts and height adjustment ■ RoHS compliant ■ Durable and beautiful stainless steel ■ Material: SUS303 (stainless steel) ■ Treatment: Degreased *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels