カメダデンキ　 List of Products and Services

This product is a "brass supporter" for supporting printed circuit boards and other components. It is RoHS compliant and offers a particularly wide range of sizes among supporters. The surface finish is nickel-plated, and the sales unit is 50 pieces. 【Features】 ■ RoHS compliant ■ Particularly wide range of sizes among supporters ■ Material: Brass ■ Surface finish: Nickel plating ■ Sales unit: 50 pieces *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

The "Round Supporter" is a convenient metal supporter for supporting printed circuit boards, acrylic covers, and other components. It can be tightened with a flathead screwdriver due to the slotted groove on the head. The plus screw supporter can be tightened with a Phillips screwdriver, making it convenient. (M4 to M5) Additionally, there is an "Insulated Supporter" that features a vinyl coating on the metal surface. 【Features】 ■ RoHS compliant ■ Can be tightened with a flathead screwdriver due to the slotted groove on the head ■ The plus screw supporter can be tightened with a Phillips screwdriver, making it convenient (M4 to M5) ■ The insulated supporter has an insulated coating on the side of the supporter (not insulated between the screws) *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

The "Hexagonal Supporter" is a convenient metal supporter for supporting printed circuit boards, acrylic covers, and other components. It is RoHS compliant and comes in a wide range of sizes from M3 to M6. It can also be connected. Additionally, there is an "Insulated Supporter" that features a vinyl coating on the metal surface. 【Features】 ■ RoHS compliant ■ Wide range of sizes from M3 to M6 ■ Connection is possible ■ The insulated supporter has insulation coating on the sides of the supporter (the area between the screws is not insulated) *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

The "Pipe Clamp PK" is a fitting for assembling the frame pipes of an open panel. It is convenient because it comes with U-bolts (the size is equivalent to our model number UB8-32A). Additionally, it has a trivalent chromate finish, so there is no need for painting. Please feel free to contact us when you need it. 【Lineup】 ■ PK-1-3C (for one side, both ends) ■ PK-2-3C (for two or more sides, intermediate) *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools
• Safety and consumables
• others

We would like to introduce our "Plastic Drawing Holder DHP." It uses high-performance adhesive tape and is available in "Standard Type" and "Flame Retardant Type." You can store drawings and specifications for distribution boards inside the holder and retrieve them as needed. 【Product Lineup】 <Standard Type> ■DHP-A4 ■DHP-A5 ■DHP-A6 <Flame Retardant Type> ■DHP-A4 V2 ■DHP-A7 V2 *For more details, please refer to the PDF document or feel free to contact us.

• Storage
• Safety and consumables
• others

We would like to introduce our product, the "Hyper Pack (Adhesive Drawing Storage Bag) DH." It features high-performance adhesive tape on the back, allowing you to store electrical panel drawings, specifications, and more inside the panel, and retrieve them as needed. Additionally, it is made of high-quality vinyl leather cloth, which offers excellent durability and weather resistance, ensuring it withstands years of use. 【Instructions for Use】 ■ Clean the surface where it will be attached, removing dust and oil. ■ Peel off the protective paper from the adhesive tape on the back of the product, and gently press it into the correct position, applying pressure from the surface. ■ Weight limit for contents: - DH-A4-NP: Approximately 2 kg *For more details, please refer to the PDF document or feel free to contact us.

• Storage
• Safety and consumables
• others

We would like to introduce our "Ventilation Louver VT-350 Type." With the "IP45 specification," it can be used outdoors due to the back hood with a blow-in prevention structure. Additionally, the "IP55 salt damage prevention specification" features a special three-layer mesh structure, resulting in an extremely low re-entrainment rate of 0.1% to 0.7%, which prevents the intrusion of salt into the interior. 【Features】 <IP45 Specification> ■ Can be used outdoors due to the blow-in prevention structure of the back hood ■ The pre-filter set is easy to attach and detach, making maintenance and replacement simple <IP55 Salt Damage Prevention Specification> ■ Special three-layer mesh structure ■ Extremely low re-entrainment rate of 0.1% to 0.7% *For more details, please refer to the PDF document or feel free to contact us.

• Ventilation openings
• others

The "Ventilation Louver (Gallery) VT-250 Type" is a product that can be used as a ventilation opening for distribution boards, control panels, and cubicles. The rear hood has an integrated mounting frame, and the filter can be attached and detached with a single knurled nut, making maintenance and replacement easy. We offer various specifications, including the "Standard Specification," the "IP45 Specification" for preventing air intake, and the "IP55 Corrosion Prevention Specification" with a special three-layer mesh structure. 【Features】 ■ RoHS compliant ■ Rear hood has an integrated mounting frame ■ Large opening area with a beautiful finish ■ Special anti-rust treatment applied to the ventilation louver's stud bolts *For more details, please refer to the PDF document or feel free to contact us.

• Ventilation openings
• others

The "LED Panel Interior Lighting KTL" is a product that brightly illuminates the inside of control panels and distribution boards. It comes as a set with fixtures and straight tubes (which can also be purchased individually). It emits very little ultraviolet light, so it does not attract insects. Additionally, it has a voltage-free specification of AC100-240V, allowing for installation without worrying about the power supply. You can also choose fixtures with terminal blocks as optional parts. 【Features】 ■ Brightly illuminates the inside of control panels and distribution boards ■ Simple, lightweight, and low-cost trough-type fixtures ■ LED straight tubes with a wide and bright light distribution accuracy of over 300° ■ Emits very little ultraviolet light, so it does not attract insects ■ Fixtures with terminal blocks can also be selected as optional parts *For more details, please refer to the PDF document or feel free to contact us.

• Fluorescent Light Type
• Other lighting fixtures

We would like to introduce our distribution board parts, "Contract Type Kanagu." Cut lines are included for easy cutting per page, and they have strength, so they do not bend even when mounted on both ends. Please use them in combination with the custom-made "Contract Type Kanagu Base." 【Lineup】 ■KBK-02P ■KBK-03P ■KBK-06P ■KBK-09P ■KBK-18P *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• Subsidiary materials
• others

The "Quick Support Bracket" is a fitting that supports and opens/closes the inner door (inner panel, protective door) of a distribution board. There are hinge-type and fixed-type options available, compatible with distribution boards of five different depths. The inner door can be removed by inserting or removing the hinge pin. Additionally, we offer "knurled screws" for the hinge-type receiving side. Please feel free to contact us if you need them. 【Features】 ■ A fitting that supports and opens/closes the inner door (inner panel, protective door) of a distribution board ■ Available in hinge-type and fixed-type ■ Lightweight while maintaining sufficient strength ■ The inner door can be removed by inserting or removing the hinge pin *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• Subsidiary materials
• others

The "SA-7G" is a hinged support post for the protective door of a distribution board. Large panels can be installed by one person, and detachment after installation is easy. Additionally, the door during work will not close due to the lock pin. The support post allows for free vertical sliding and rotation, making it possible to install in any orientation. 【Features】 ■ Hinged support post for the protective door of a distribution board ■ Easy detachment after installation ■ The door during work will not close due to the lock pin ■ The support post allows for free vertical sliding and rotation *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• Subsidiary materials
• others

We would like to introduce our distribution board part, the 'Mini Kanagu VK'. This product is a kanagu that allows for free adjustment of the protective plate and the mounting height of the equipment inside the panel. It can be adjusted flexibly with just one screwdriver. Additionally, adjustments and fine-tuning can be made even after the equipment has been installed. 【Specifications (partial)】 ■ Material: Steel plate ■ Surface finish: 3C Trivalent chromate ■ Sales unit: 20 pieces *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• Subsidiary materials
• others

The "BG/BGC" is a bolt used for grounding terminals, with a head colored green. It features a baked-on paint that does not peel off and can be used with either a plus or minus screwdriver. We also offer the convenient "BGS" with washers. Please feel free to contact us when you need it. 【Lineup (partial)】 ■BG-5-Ro ■BG-6-Ro ■BG-8-Ro ■BGC-5-Ro ■BGC-6-Ro *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• Subsidiary materials
• others

We would like to introduce our distribution board part, the "Ground Terminal GC." This product is finished simply by welding it to a box. The terminal part is made of copper plate, and the welded part is made of steel plate and is brazed, ensuring it does not come off even after welding. Please feel free to contact us when you need it. 【Lineup (partial)】 ■GC5-2 ■GC6-2 ■GC8-2 ■GC10-2 *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• others

We would like to introduce our "Earth Bar EB" for grounding control panels and similar applications. We offer a compact size of 100mm in length, as well as a high-capacity type with significant grounding effects. Additionally, new product types such as "EB4-20-011" and "EB4-20-016" have been added to our lineup. Please feel free to contact us for inquiries. 【Partial Lineup】 ■EB5-30-01 ■EB5-50-05A ■EB5-50-05B ■EB4-20-011 *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• others

We would like to introduce our "Copper Bar DB / Copper Bar Processing" that we handle. The "Copper Bar DB" for busbars, which has been plated, is available in 7 types according to capacity, ranging from 120A to 720A. Additionally, with "Copper Bar Processing," we can accommodate various customer requests such as short delivery times, small lots, and special shapes. 【Features of Copper Bar DB】 ■ Plated ■ For busbars ■ Available in 7 types ■ Cutting, hole processing, and tapping are also possible *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• others

The "Main Bar MB" is a processed product designed as a branch copper busbar for distribution boards. It features continuous M5 tapped holes processed at a 25mm pitch, allowing for easy assembly of branch circuits in combination with bridging bars. There are five types available for power capacities ranging from 90A to 360A, with lengths of 1m and 1.25m each. Please cut to size according to your application. 【Lineup (partial)】 ＜L=1000＞ ■MB3-15-1 ■MB4-15-1 ■MB5-20-1 ■MB6-25-1 ■MB8-30-1 *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• others

We would like to introduce our distribution board part, the "Shunt Lead (Flexible Conductor)." This product is made by compressing both ends of a flexible flat braided copper wire with copper tubes for terminal processing. It can be used for the movable parts of terminals and for connecting the terminal sections of transformers to busbars. Additionally, the total length can be manufactured according to your specifications. 【Lineup】 ■ KSA Type (1 hole) ■ KSB Type (2 holes) ■ KSC Type (4 holes) *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• others

We would like to introduce our "High Voltage Relay Terminal Block" based on the 6KV lightweight BMC resin insulator that we handle. This product does not use PVC for protective covers and is safe as the charged parts are covered with a transparent cover. Please feel free to contact us when you need assistance. 【Lineup】 <Without Insulator> ■ J200 (with protective cover) ■ J200S (without protective cover) <With Insulator> ■ ES-6-□-J200 ■ ES-6-□-J200S (□ part indicates insulator: 1/2/2X) *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices
• others

The "6kV BMC Resin Insulator (for Light Load)" is a product that can be used as a mounting base for high-voltage wire support insulators, disconnectors, circuit breakers, and other equipment within high-voltage receiving and distribution panels. Manufactured with stable quality through excellent resin formulation technology, referencing JIS standards (JIS C3851). Compared to porcelain insulators, it has better electrical and mechanical properties, is compact and lightweight, and offers excellent durability. Additionally, a separate accessory, the wire holding bracket "EP-0," is available for purchase. 【Features】 ■ Can be used as a mounting base for high-voltage wire support insulators, disconnectors, circuit breakers, and other equipment within high-voltage receiving and distribution panels. ■ Manufactured with stable quality through excellent resin formulation technology. ■ Better electrical and mechanical properties compared to porcelain insulators. ■ The wire holding bracket "EP-0" is available as a separate accessory. *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices
• others

The "CBS-ED" is a durable type of insulated support that can be used for KIP wires ranging from 38sq to 200sq. It features a hinge design for easy wiring work and can be securely fixed with just one screw. Additionally, the wire holder adapter uses a flexible elastomer, ensuring that the wires are held securely without causing any damage. 【Features】 ■ Durable type suitable for KIP wires from 38sq to 200sq ■ Can be securely fixed with just one screw ■ Wire holder adapter made of flexible elastomer ■ Holds wires securely without causing damage *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices
• others

The "CBS-EC" is a support material that is compact, lightweight, easy to handle, and designed to provide sufficient insulation properties. It adopts a hinge type that makes wiring work easy. Combined with a holding mechanism that prevents screws from falling, it offers excellent workability. Additionally, it is made of polypropylene, which is strong against impact and has good electrical insulation properties, ensuring sufficient strength even in a small size. 【Features】 ■ Adopts a hinge type for easy wiring work ■ Made of impact-resistant polypropylene with good electrical insulation properties ■ The wire holder adapter uses a flexible elastomer ■ Securely holds wires without damaging them *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices
• others

We would like to introduce our low-voltage "Flame Retardant Spacer ES." It can be used as an insulating base for equipment installation such as distribution boards, sub-distribution boards, and control panels, as well as for busbar connections and insulating supports for wiring. We offer a variety of types including the "Double-Sided Nut Type," "Bolt and Nut Type," and "Mini Type with Bolt and Nut." 【Product Lineup (Partial)】 ■ Double-Sided Nut Type: ESM-20-4-V0 / ESM-20-5-V0 / ES-20-4-V0 ■ Bolt and Nut Type: ES-B-20-406-V0 / ES-B-20-4-V0 ■ Mini Type with Bolt and Nut: ESM-B-20-406-V0 / ESM-B-20-4-V0 *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• others

We would like to introduce our "Spacer Connecting Screws (Hexagon Socket Cap Screws)." This product is a bolt used for connecting spacers and is compliant with RoHS. Please feel free to contact us when you need assistance. 【Product Lineup】 ■LSJ-412 ■LSJ-512 ■LSJ-612 ■LSJ-615 ■LSJ-818 ■LSJ-822 *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• others

The "Spacer LS" is an insulating support for low voltage applications (AC 600V or below). Various sizes are available for height and screw diameter. It is very convenient for supporting items that require insulation, such as busbars. Additionally, it is made of polypropylene, which has excellent impact resistance and insulation properties. 【Product Lineup (partial)】 <Double-sided Nut Type> ■LS-15-M4-V0 ■LS-15-M5-V0 <Bolt and Nut Type> ■LS-15N-414-V0 ■LS-15N-514-V0 *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• others

The "Bar Holder BHX" is a product that supports low-pressure busbars without drilling holes, by clamping from the top and bottom. It can support a wide range of copper strips from 8mm to 20mm in thickness. The groove widths on side A and side B are different, allowing it to be used according to the thickness of the copper strip. Additionally, it comes with insulated bolts, so please choose the part number according to the width of the copper strip. 【Features】 ■ RoHS compliant ■ No holes drilled in low-pressure busbars ■ Clamps from the top and bottom ■ Different groove widths on side A and side B *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• others

The "KP Cleat (made of FRP)" is a product designed to support low-voltage busbars in a three-phase configuration. It is made of fiberglass-reinforced FRP, which offers excellent electrical properties and mechanical strength, making it lightweight and durable. We will manufacture it to order according to your desired busbar pitch and thickness. 【Features】 ■ RoHS compliant ■ Supports low-voltage busbars in a three-phase configuration ■ Excellent electrical properties and mechanical strength ■ Made to order *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• others

The "Bar Holder BHS" is an inexpensive, lightweight support designed to hold low-pressure busbars, offering excellent workability. It supports each busbar vertically, allowing for flexible spacing adjustments. It can be secured with a single bolt and accommodates a wide range of copper strip dimensions. Additionally, the BHS-15 is larger than the BHS-10, making it suitable for larger busbars. 【Features】 ■ RoHS compliant ■ Inexpensive, lightweight, and excellent workability ■ Vertically supports each busbar individually ■ Can be secured with a single bolt *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• others

We would like to introduce our product, the "Quick Holder KH." This product is a clamp that allows you to attach ducts and components by inserting it into an angle. It can be fixed with just one screw, eliminating the need for drilling holes. The KH-65 and KH-100 can also directly secure electrical wires with cable ties. 【Lineup】 ■KH-1-3C ■KH-4-3C ■KH-65-3C ■KH-100-3C *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• others

We would like to introduce our auxiliary product, the Mini Quick KS. This product is convenient for adjusting dimensions and height, and can be used in combination with the channel KC-22S. The KS-14 allows for easy wiring fixation using push mount ties. Please feel free to contact us if you have any inquiries. 【Lineup】 ■KS-11-3C ■KS-12-3C ■KS-14-3C *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• others

The "LK/HK" is an auxiliary bracket that can be freely used to support wiring ducts and small parts. Due to its continuous groove with holes, it allows for flexible positioning. By adding bending processing, it can also accommodate difficult-to-install locations. Additionally, we offer a nut "NS-5T" that prevents slipping by fitting into the protruding part when installing this product. 【Lineup】 ■LK-6-3C ■LK-8 ■LK-12-3C ■HK-7-3C ■HK-10-3C ■HK-15-3C *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• others

The "S-18" is a bracket for installing wiring ducts behind the control panel door. It secures the duct by sandwiching it between pilot lamps and operation switches, eliminating the need to stand up stud bolts. We offer three types for 22φ, 25φ, and 30φ. Please feel free to contact us when you need them. 【Product Lineup】 ■S-18-22-3C ■S-18-25-3C ■S-18-30-3C *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• others

We would like to introduce our auxiliary kanagu, the "S-24." This product is RoHS compliant and assists with ducts, wiring, small item installation, and connections. Available in three sizes to suit your needs. Please feel free to contact us when placing an order. 【Lineup】 ■S-24-3-3C ■S-24-2-3C ■S-24-1-3C *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• others

The "Connection Kanag S" is a convenient product for supporting ducts, wiring, and small parts. All Kanags have tapped holes for attaching parts (except for S-5), so there is no need for nuts. S-11 and S-11B are used when connecting U-1 and U-26 at a right angle (S-11B has a 9φ hole instead of a tapped hole). Additionally, S-20-25 and S-20-32 are sturdy right-angle connection Kanags, so please use them for securing heavy objects. 【Lineup (partial)】 ■S-4-3C ■S-4-5-3C ■S-5-3C ■S-6-3C ■S-6B-3C *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• others

We would like to introduce our switch mounting base 'S-14'. This product is a convenient mounting bracket for installing volumes and various switches individually within distribution boards, control panels, and operation panels. We offer a space-saving type and an easy-to-install Z-type among our lineup. Please feel free to contact us when you need assistance. 【Product Lineup】 ■S-14-3C ■S-14Z-3C ■S-14F-9-3C ■S-14F-13-3C *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• others

The "ZK/ZKH" is a convenient mounting bracket for installing various switches and volume controls individually. The switch mounting holes come in five sizes: 9φ, 13φ, 22φ, 25φ, and 30φ, accommodating all switches and volume controls. The 9φ and 13φ holes have small holes for anti-rotation at 0° and 90° positions, allowing for vertical or horizontal installation. 【Features】 ■ RoHS compliant ■ Five sizes of switch mounting holes: 9φ, 13φ, 22φ, 25φ, and 30φ ■ Available in single and double configurations for each size, allowing for combinations of three or more in multi-unit installations ■ The switch mounting surface is designed to be wide for easy attachment of display nameplates *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• others

We would like to introduce our product, the "Mounting Bracket S." This product is an auxiliary bracket designed for parallel installation on the mounting surface and complies with RoHS standards. Additionally, a new version with one mounting hole has been added for easier use. Please feel free to contact us when you need assistance. 【Product Lineup】 ■S-8-1-3C ■S-8-2-3C ■S-9-1-3C ■S-9-2-3C ■S-10-1-3C ■S-10-2-3C *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• others

The "Terminal Block Mounting Bracket JK" is a product that supports space-saving terminal blocks. The angle is a user-friendly 25°, and there are six height options ranging from 25mm to 100mm. The center of the terminal block rail and the center of the mini bracket mounting screw are aligned on the same line, making design easier. 【Features】 ■ RoHS compliant ■ Compact and lightweight, allowing easy installation of terminal blocks in narrow spaces with a space-saving design ■ The center of the terminal block rail and the center of the mini bracket mounting screw are aligned on the same line ■ Six height options ranging from 25mm to 100mm *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• others

We would like to introduce our 'Terminal Block Mounting Bracket S' for installing terminal blocks at an angle. The "KS-1T" now includes an M4 type. It has two screw holes, allowing for the connection and installation of two terminal blocks. Additionally, we also offer popular terminal block brackets such as "S-2M" and "S-3". Please feel free to contact us when you need assistance. 【Product Lineup (Partial)】 ■KS-1T-4-3C (M4) ■KS-1T-5-3C (M5) ■S-1-4-3C (M4) ■S-1-3C (M5) *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• others

The "DAC Series" is a lightweight, compact aluminum cutter specifically designed for DIN rails. The cutting position is visible from above, allowing you to confirm the cut line drawn on the rail, making the work easy and safe. It can cut Kameda DIN rails DA-14 and DA-15 series, as well as aluminum DIN rails of the same shape. Additionally, a scale is available for purchase separately. 【Features】 ■ Uses Mokuba brand blades from Miki (Hyogo Prefecture) for exceptional cutting performance ■ Capable of cutting Kameda DIN rails DA-14 and DA-15 series and aluminum DIN rails of the same shape ■ The cutting position is visible from above, allowing you to confirm the cut line drawn on the rail, making the work easy and safe ■ The cutting blade die can also be removed for sharpening *For more details, please refer to the PDF materials or feel free to contact us.

• Subsidiary materials
• Work tools
• others

The "Free Washer W" is a product designed to prevent the legs of components from falling into the grooves of the DIN rail when attaching parts to the multifunctional reinforced series. It is designed to stay in place simply by being placed on the rail, and lateral movement is easy because the nuts are also held and move simultaneously, making positioning simple. Please use it together with the "Free Nut ND" or "Square Nut NS." 【Features】 ■ RoHS compliant ■ Used when attaching parts to the DIN rail multifunctional reinforced series ■ Lateral movement is easy as the nuts move simultaneously ■ Use together with "Free Nut ND" or "Square Nut NS" *For more details, please refer to the PDF materials or feel free to contact us.

• Subsidiary materials
• others

We would like to introduce the "RAIL SOCKET" available at Kameda Denki Co., Ltd. With just a down rail, you can freely layout LED straight tubes. Combined with spotlights, it enhances the lighting for product displays more effectively. We offer the "RAIL SOCKET S" for one light and the "RAIL SOCKET W" for two lights. Please feel free to contact us when you need assistance. 【Features】 ■ Flexible lighting layout ■ Choose between one or two lights to match your indoor image ■ Colors: two types, white and black ■ By rotating the straight tube for indirect lighting, it makes the living space more attractive ■ Size is flexible, compatible with 10 to 40 types *For more details, please refer to the PDF document or feel free to contact us.

• Other lighting fixtures

"Amomat" is a completely new type of floor heating heater manufactured by AHT, using amorphous alloy ribbons in the heating element. It provides the same warmth at a lower temperature setting compared to hot air systems. Since it generates heat from underneath the floor, there is no heat loss. Additionally, as it does not use fire for heating, there is no risk of burns, making it safe for children and the elderly. 【Features】 ■ Radiant heat similar to that of the sun, providing a pleasant warmth like that of spring days ■ No use of fire, keeping the air clean ■ No water circulation, maintenance-free ■ Can heat only the necessary areas by dividing the room ■ A low-temperature heat source that is gentle on buildings *For more details, please refer to the PDF document or feel free to contact us.

• Floor heating system

The "Amoribon" is a completely new type of snow melting heater manufactured by AHT, using amorphous alloy ribbon in its heating element. This product, invented in Japan, has been turned into a heater in Israel, featuring outstanding snow melting capability and durability. It has a significantly larger heating surface area compared to conventional electric heating wires, releasing a large amount of radiant heat to powerfully melt snow. Additionally, it does not have moving parts like boilers or hot water pipes for heating, resulting in fewer breakdowns and eliminating the need for regular equipment replacement. 【Features】 ■ Compatible with various snow melting needs ■ Cost-effective running costs ■ Powerful & eco-friendly ■ Exceptional durability for a long lifespan ■ Maintenance-free *For more details, please refer to the PDF materials or feel free to contact us.

• District heating and cooling/heat source system