ルッドスパンセットジャパン List of Products and Services

Ideal for loading and unloading workpieces for machine tools! ● Easy on/off switching with just a 45° twist ● Long lifespan achieved with a magnet shaft equipped with ball bearings and a corrosion-resistant surface ● Optional handles sold separately, with choices for hold grips or extended long handles *For more details, please feel free to contact us.

• Transport machinery

eLINK (Multi-Function Control System) is a central data collection and control system that allows for the individual or group control of auto hooks. Using the eight inputs and four outputs of eLINK, sensor data from the auto hooks can be utilized, enabling easy automation of cranes through an app. The inputs allow for the assignment of hook opening and closing operations to physical buttons. The outputs enable control of the auto hooks and crane operations by setting conditions in advance on the app. For example, it is possible to configure the system to cut off the signal to the hook when it is detected to be in an intermediate position, or to stop the crane's operation when the hook loses the signal. With its simple operability, it can connect via Wi-Fi from smartphones, tablets, or PCs, allowing for monitoring of the hook's opening and closing as well as its status. Remote operation allows for safe lifting and lowering of loads, thereby increasing work efficiency.

• Crane and others

This is a non-slip seal suitable for forklift and indoor/outdoor work. Because it has no thickness, it won't catch! Loading and unloading work is smooth! It can be easily adhered with a seal type. *Can be easily cut with scissors or a cutter. *It is also used as a non-slip surface for scaffolding, in addition to forklifts. 【Friction Coefficient】 Outdoor Secure Grip 90: 0.74μ Indoor Secure Grip 75: 0.91μ *The surface material of Secure Grip is made of polyurea. 【Features】 - Rust and waterproof: Extremely excellent waterproof performance - Weather resistance: Resistant to deterioration over long periods - Abrasion resistance: Elastic and very strong against friction - Friction force: Excellent slip resistance.

• forklift

Suitable for outdoor festivals and live event setups, as well as sites using tower cranes. With the multi-point load monitoring system on the Long Stage Master RSM, speed can be displayed and managed on the same screen as the load management screen. * A warning will be displayed when the wind reaches the set speed limit. * Easy to install due to no cable connections or damage.

• Anemometer

The "CCH-50/80/160" is a chain block suitable for power plants, clean rooms, medical facilities, food, chemicals, and water supply and drainage sites that require explosion-proof, dust-proof, and rust-proof features. Thanks to the sealed brake and gear unit, it can be used in clean rooms. Customization is available upon request. Please feel free to contact us when you need assistance. 【Features】 ■ Made of all stainless steel, compliant with standard: DIN EN 13157 ■ Suitable for use in power plants, clean rooms, medical facilities, food, chemicals, and water supply and drainage sites ■ Available load capacities of 0.5, 0.8, and 1.6 tons *Currently, our product page and catalog only list up to 0.8 tons. Please contact us if you require 1.6 tons. ■ Swivel upper hook and swivel lower hook with ball bearings *For more details, please check the related link to the CCH special page or feel free to contact us.

• Various blocks

The "Goccha Series" is a product designed for rescuing injured individuals in a suspended state. It is suitable for rescuing injured persons at heights or workers in a suspended position, and it is easy to carry, allowing for quick unpacking and entering a rescue position. Additionally, the "Goccha 2" and "Goccha CRD Reach" come with a telescopic pole of approximately 3 meters, enabling remote rescue. Please feel free to contact us if you have any inquiries. 【Rescue Kit Lineup】 ■ Goccha 2 ■ Goccha CRD Ladder ■ Goccha CRD Reach ■ Goccha Shark *For more details, please download the PDF or feel free to contact us.

• Safety Supplies

We would like to introduce our "Large Lifting Point Series" available in bolt-type and welded-type. The lineup includes products with a working load limit of up to 250 tons, making them suitable for lifting and inverting ultra-heavy objects in the 100-ton class. They are also compatible with round slings. In the case of multi-point bolt types, the bolt thread diameter and depth are smaller, which can reduce processing costs and tightening burdens.

• Work tools

The "Exteepa Anchor" is a fall prevention and rescue system for confined spaces. It is equipped with a safety block to prevent falls and a winch for rescuing an injured person from above by oneself. - Made of aluminum, it is easy to carry and assemble, with a wide range of options available. - It is a push-type, so no tools are required! - Even in narrow spaces like manholes, it is possible to lift an injured person from above by oneself. It comes with various base types to choose from, accommodating different locations. 【Lineup】 ■ Barricade type ■ Davit arm ■ Pole hoist type ■ Color type *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

We offer products that contribute to the safe storage and transportation of large coil materials and slit steel materials. The "Coil Stand" prevents damage with a polyurethane mat. By inserting poles into the grooves on both sides, it provides a storage space that can be adjusted to the length of the coil, allowing for safe and compact storage of shorter coils without tipping. The "Coil Meister" features a double structure with a belt and a sturdy protective sleeve, preventing friction between the workpiece edges and the sling. Its slim design allows for easy passage between coils and can accommodate lifting and standing up to 2 tons of slit coils. 【We meet the following needs】 ◎ Want to store large coils compactly ◎ Want to flexibly accommodate coil lengths (widths) ◎ Want to transport large coils safely *For more details, please refer to the materials. Feel free to contact us as well.

• others

The "LIFTSUIT 2.0" is a Swiss-made assist suit that excels in various fields such as manufacturing, logistics, construction, healthcare, nursing, and agriculture. It provides support of up to 28 kgf without any power source. It is machine washable for cleanliness and features a compact design that allows it to be worn on both the inside and outside of work clothing. Additionally, when support is not needed, it can be deactivated for comfortable movement, allowing for driving or resting while still wearing it. 【Features】 - Lightweight and easy to carry at under 1 kg - Support of up to 28 kgf without any power source - Cool mesh material - Support release function - EES (special high-rebound rubber) stretches to reduce strain during work ★ Available in two sizes, making it easy to fit various body types. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• others

The "EVO Series" is a wireless auto-opening and closing hook manufactured by Elevia, capable of remote-controlled lifting operations. Equipped with a magnet, it attracts the lifting gear when the hook approaches, adjusting it to the correct position. After that, simply press the control button to close the hook, and you can lift the load. Additionally, special specifications such as explosion-proof, heat-resistant, and marine options are available upon request. Please contact us for more details. 【Features】 ■ Equipped with a magnet ■ Attracts the lifting gear and adjusts to the correct position when the hook approaches ■ No other special operations required ■ Enables remote-controlled loading and unloading operations ■ Large diameter auto hook "NEO Series" also available *For more details, please refer to the PDF document or feel free to contact us.

• Crane and others

We would like to introduce the lifting equipment for wind power generation that we handle. The "Vario Tap," used for lifting and raising towers, features a pitch adjustment function that matches flange holes and is compatible with flange diameters ranging from 2m to 6m. Additionally, we offer products such as the "Round Sling Pulley for 40-100 tons" and the "Vario J Hook for 60, 90, and 120 tons," which includes an inner shell slide bearing to facilitate the smooth raising of towers. 【Product Lineup (Partial)】 ■ Vario Tap ■ Round Sling Pulley for 40-100 tons ■ Vario J Hook for 60, 90, and 120 tons ■ TAP Sling + No Cut (Protection) *For more details, please refer to the PDF document or feel free to contact us.

• lift

The "Mold Separator Tool Separator" allows for precise and quiet attachment and detachment. Regular maintenance reduces work loss. It enables work in an ergonomic posture. 【Options】 ■ Protective bracket ■ Base ■ Remote control ■ RUD TECDOS TS sliding surface ■ RUD lifting point ■ Light curtain ■ Protective fence *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Tool Mover TMB-2.5" is a mold inversion machine that can rotate up to 90 degrees. It allows for inversion without lifting the load, reducing the risk of accidents caused by contact with operators or falling. Additionally, it can stop the table's rotation at any desired position, contributing to increased flexibility in operations. 【Features】 ■ Can be inverted by inserting and rotating an electric screwdriver, eliminating the need for power sources such as electricity, air pressure, or hydraulic pressure. ■ Easily movable with a forklift. ■ Equipped with a TECDOS drive system that pursues efficiency and quiet operation. *For more details, please refer to the basic information. *For further information, please check the PDF materials. Feel free to contact us as well. *The "Mold Separator Tool Separator TS" is also available. Please access it via the link below.

• others

The "Supra Plus-X" is an ultra-lightweight round sling designed with safety in mind. Compared to conventional products, its abrasion resistance has been improved by up to 50%. It uses twice the amount of high-performance fibers for rib reinforcement compared to previous models. The surface fabric incorporates filaments to prevent tearing. Additionally, upgrading to Supra Plus-X makes it even more compact than conventional products. An RFID tag can be optionally attached, simplifying management tasks such as inspections and maintenance. 【Features】 ■ Up to 29% more compact compared to conventional models ■ 50% increase in abrasion resistance compared to conventional models ■ Label with a protective tube for easy readability ■ Maximum working load woven in ■ Filaments to prevent tearing *For more details, please refer to the PDF materials (catalog page 8) or feel free to contact us.

• Work tools
• Harbor Construction
• Other civil engineering works

"TXP-Tech Point" avoids damage from hooks and shackles, ensuring that the load being lifted is not harmed. To prevent damage and deformation of the fiber loop (round sling), a suitable "r" ring is adopted. Sizes available include M16/M20/M24 in standard, fine, UNC, and UNF threads. 【Features】 ■ ICE Bolt: Utilizes a patented material that combines high strength and toughness ■ Bolts are designed to prevent mix-ups ■ Each unit is embedded with an RFID chip to simplify inspection management ■ Smooth and safe rotation under load due to ball bearings ■ Textile sling made from high-tech materials, available in lengths of 0.5m and 1m ■ Combined with NoCut for sharp edges. *For more details, please refer to the PDF document or feel free to contact us.

• Hook
• others

The "Auxivo Lift Suit" is an assist suit born in Switzerland. The built-in elastic support (EES) reduces the load on the back and waist muscles as an "external muscle." 【Features】 ■ Lightweight design (under 1kg) ■ No power source such as motors or electronics ■ Support strength of up to 28kgf ■ Reduces the burden on back and waist muscles by up to 40% ■ EES (special high-rebound rubber) stretches to alleviate the load on the back and waist during work. *Parts are replaceable ■ Equipped with a support strength release function ■ Can be worn while driving or resting (when deactivated) ■ Can be worn on either the inside or outside of work clothing Recommended for those who perform tasks such as: ■ Repeatedly lifting items from waist height or below ■ Needing to maintain a forward-leaning posture ■ Working at knee level and needing to reach for items And more *For more details, please refer to the PDF document or feel free to contact us.

• others
• Safety and consumables
• Safety Supplies

Wireless Load Cell End Shackle Series Ron 2501-S - Lightweight enough to be held with one hand. Only 1.4 kg for a 12.5-ton capacity. - Compact design eliminates concerns about ceiling height. - Mounting holes are offset by 90 degrees, reducing torsional loads on the load cell. Enhances safety and accuracy. - Load monitoring is possible from any direction, maximizing the advantages of wireless technology. - Made from aerospace-grade steel, featuring a robust design that withstands various environments. - The product comes with an industry-leading warranty period of 5 years. - Multiple load cells can be monitored using a dedicated receiver (sold separately). Compatible with smartphones, tablets, and PCs. - High precision of ±0.1% of full scale. For example, a 1-ton capacity has an error of ±1 kg.

• Other measuring instruments
• others

The "VRS" is a rotary eye bolt that is easy to install and adjust. For sizes M6 to M24, it uses the original "ICE Bolt" from Rudd, which is strong for use at low temperatures and achieves higher toughness, bending strength, and wear resistance. Additionally, the basic working load is clearly marked. Depending on the direction of pull, it can be used at even higher working loads. 【Features】 ■ Can be easily and quickly attached and detached ■ Can be attached and detached with a dedicated installation key ■ 360° rotation allows adjustment of the ring's orientation according to the load direction ■ Tested and certified by DGUV ■ The bolt head is clearly marked with the company name, ICE, screw size, manufacturing number, and strength class *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The adoption of a special spring makes it easy to replace bolts and inspect without special tools. A round shape is used for the friction limit notch and the hanging part. Additionally, RUD's unique mechanism is employed, allowing for safe lifting operations without causing kinks. Furthermore, only high-tensile grade 10.9 or higher bolts that have passed magnetic particle inspection are used, ensuring a robust specification and high safety. 【Features】 - Special patented ICE steel bolts improve conventional strength by 30% - New model equipped with RFID blue chip, allowing data retrieval via smartphone - Lineup from M12 to M42, inch 1/2 to 1-3/4, 1.35t to 16t - The color of the main body changes according to the usage temperature, allowing visual confirmation of temperature effects. *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• others

The PowerPoint Star is a bearing-equipped all-direction eye bolt recommended for sites with frequent inversion work. Thanks to the Cobra hook, which does not limit the type of lifting equipment, existing lifting tools such as wire ropes, chain slings, and belt slings can be used as they are. With a double ball bearing design, it rotates smoothly even under load, enhancing work efficiency and safety. 【Features】 - Connects with Cobra hooks, B links, and VIP chains, and includes a mechanism to prevent incorrect installation. - Double ball bearings allow for smoother inversion work. - Various lifting tools can be attached with a single touch, eliminating the need for extra hardware like shackles. - Reduces work time. - Basic working load is clearly marked. *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "Bario Ring VWBG-V/VWBG" is a lifting point with a bolt type that reduces shock loads caused by friction during rotation and inversion through ball bearings. It allows for 360° rotation, with a ring movement range of 230°. It features wear markings for easy identification of disposal standards. In addition to a wide variety of sizes and thread standards, there is also a long bolt type available that can be used with taps and through holes.

• Hoist/Crane
• Work tools

The RUD ID system is a product management system that utilizes RFID technology. It centralizes the management of product information, which has been complicated by a large amount of paperwork and data, making operational management easier. The system consists of ID points, ID readers, and ID networks. It supports product information management from both hardware and software perspectives. 【Features】 *ID Points - Designed to withstand harsh environments requiring durability → From -80 degrees to 270 degrees → Strong against external issues such as vibration and pressure → Resistant to liquids like seawater → Not affected by magnetic fields even after magnetic flaw detection tests *ID Readers - Can utilize devices owned by customers - Supports frequency band compliant with international standard ISO15693 (13.56MHz) - Capable of reading RFID chips other than RUD *ID Network - Web-based software that requires no installation - Multiple operators can work simultaneously on the same application and more *For more details, please contact us or download the catalog.

• Work tools
• Other Software

The ultra-lightweight compact heavy-duty fiber sling 'Magnum X' manufactured by the German company Spanset, which we handle. It uses 100% high-quality polyester that excels in abrasion resistance and contributes to a longer lifespan, providing more than twice the tensile strength compared to regular polyester slings and over ten times compared to wire ropes used for lifting. A special manufacturing method that avoids seams in the sleeve achieves a compact finish, preventing the sling from overlapping with the crane hook. Additionally, we offer the "Magnum X Short," available in shorter sizes ranging from 0.375m to 2m, suitable for lifting large molds. 【Features (Magnum X)】 ■ Uses high-strength materials, reducing weight and width by about 50% compared to conventional products ■ Achieves a compact finish ■ Prevents the sling from overlapping with the crane hook ■ A rich lineup ranging from 10 tons to 450 tons ■ Custom lengths up to 30m can be produced ■ Comes with a label that clearly indicates the working load ■ Equipped with an RFID chip *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

"Power Force" is a belt sling with high abrasion resistance. It has improved abrasion resistance compared to conventional polyester slings and is 60% lighter. The sewing of the joints, which can vary when done by hand, is mechanized to ensure consistent and precise results. Additionally, the color of the eye section is differentiated by the working load, allowing for immediate recognition of the load capacity. 【Features】 ■ Improved abrasion resistance compared to conventional polyester slings ■ Consistently precise and uniform finish ■ Three different specifications - End eye type - End D-ring type - Round sling type ■ Label with RFID chip ■ Material is HMPE (high molecular weight polyethylene) Usable temperature range is -40 to 60°C *For more details, please refer to the PDF document or feel free to contact us.

• Crane and others

The "Power Star (Eye Type/D Ring Type)" is a belt sling manufactured by SpanSet, a top-class manufacturer of fiber slings. The color of the main body changes according to the working load, allowing for immediate understanding of the load capacity. Additionally, the working load is determined by the width, with stitching every 30mm. If there are two stitches, it can be quickly identified that the width is 90mm and suitable for 3 tons. The eye section is reinforced with high-tech fibers to enhance abrasion resistance, and both ends of the belt are strengthened to resist damage. The surface of the belt is treated with an invisible coating that makes it resistant to wear, exhibiting about three times the durability of conventional products. 【Features】 ■ Reinforced with high-tech fibers for abrasion resistance and damage resistance at both ends of the belt (Eye Type) ■ About three times the durability of conventional products ■ Suitable for chalk lifting (D Ring Type) ■ Easy to attach to crane hooks (D Ring Type) ■ Also available in a four-layer type *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Harbor Construction
• Other civil engineering works

- The material is made of UHMPE (Ultra High Molecular Weight Polyethylene), making it lightweight, flexible, and highly resistant to cutting. - Easily movable to the desired position. - Protects the fiber sling from the edges of the suspended load. - Can be easily attached to Spanset fiber slings. - For inverting sharp suspended loads or for lifting. ★Exhibiting at INTERMOLD 2023 (34th Mold Processing Technology Exhibition) / Mold Exhibition 2023! Please check the basic information for details. For more information, please download the catalog or contact us. *The catalog includes "Advice for inverting coil materials"! (Catalog page 14)

• Crane and others

"Secutex" is a sling protection made of hardened polyurethane, boasting high durability. When a load is applied, the sling slides smoothly inside the protection, significantly reducing wear. It prevents damage from edges and greatly extends its lifespan. Due to its clip design, it can be easily attached and detached from your existing slings. 【Features】 ■ Made of hardened polyurethane with high durability ■ Prevents damage from edges and greatly extends lifespan ■ Easily attachable and detachable from your existing slings ■ Significantly reduces wear *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

Conventional padding has low performance against edges, resulting in significant wear and quick deterioration, necessitating replacement. "Secuflex" is a sling made by the German company SpanSet, coated with polyurethane. Therefore, for H-beams, coils, and steel plates, you can use the polyurethane (Secutex) side, which excels in cut resistance, while for rough-surfaced loads like concrete and wood, you can use the hard coating (Powerflex) side, which excels in abrasion resistance. Additionally, the C-hook type allows for quick and easy choker lifting. 【Features】 ■ Reduction in padding costs ■ Can be used selectively according to application ■ Excellent cut resistance ■ Excellent abrasion resistance ■ Quick and easy choker lifting possible (C type) *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "VRM" is a rotating eye nut that can rotate 360° and adjust the orientation of the ring according to the load direction. The basic working load is compatible with all directions. Depending on the pulling direction, it can be used with an even higher working load. It complies with BG/DGUV "GS-OA-15-04" and clearly marks the basic working load. 【Features】 ■ 360° rotation ■ Adjustable ring orientation according to load direction ■ Basic working load compatible with all directions ■ Can be used with a higher working load depending on the pulling direction ■ Complies with BG/DGUV "GS-OA-15-04" *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "VRBS-FIX/VRBK-FIX" is a welded ring shackle that distributes the load through multi-point fixation, making it gentle on the suspended load and more compact. It features wear markings that clearly indicate the disposal criteria at a glance. Additionally, the markings on the "VRBS-FIX" allow for easy identification of the load angle. The suspension ring and block are integrated with a fixed spring, resulting in a simple structure that makes correct welding positioning easy. 【Features】 ■ Distributes load through multi-point fixation ■ 100% basic working load even at 90° in the ring plane direction ■ Wear markings that clearly indicate disposal criteria (patented) ■ Ring and block are integrated with a fixed spring (patented) ■ Basic working load is clearly engraved *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• others

The "WPP(H)-S/-B/-VIP (PowerPoint Star)" is a lifting point that allows for one-touch attachment to various lifting devices, reducing work time. It meets the basic working load even at a 90° pulling direction, minimizing snagging in any direction. Equipped with double ball bearings, it is suitable for inversion and lifting operations. 【Features】 ■ One-touch attachment to various lifting devices ■ Utilizes double ball bearings ■ Ideal for inversion and lifting operations ■ 360° rotation capability ■ Meets basic working load even at a 90° pulling direction *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• others

The "VABH-W/VCGH-S" is a simple structure welding excavator hook that allows for quick welding installation. It can shorten work time with one-touch installation and can also be used as a bucket hook. Additionally, it is compatible with wire ropes and round slings, and eyes and rings can also be attached. 【Features】 ■ Shortens work time with one-touch installation ■ Wear markings for easy identification of disposal standards (patented) ■ Sturdy forged safety latch ■ Can also be used as a bucket hook ■ Simple structure allows for quick welding installation *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• others

The "VLBS/VLBS-U" is a welded lifting point with a movable ring that can accommodate loads in a 180° direction. Thanks to the tension spring under the cover, the ring can be supported at the desired position, and noise is also reduced. Due to the welded installation, the seams are completely shielded, preventing corrosion, making it suitable for outdoor use. 【Features】 ■ Suspension ring is movable 180° ■ 100% basic working load even at 90° in the plane of the ring ■ Fixed spring functions to prevent noise ■ Can hold the ring at any desired position ■ Easy to install *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

"ABA" is a welded all-direction ring plate that has been heat-treated with a safety factor of 4:1 and is resistant to wear. It is made of robust forged material, preventing noise during transportation due to strong vibrations and shock loads. It has been confirmed to be usable even in low-temperature conditions of -40°C. A notch bar impact test certificate can also be issued upon request. 【Features】 ■ Phosphate coating treatment ■ Simple structure allowing for quick welding installation ■ Basic load capacity is compatible in all directions ■ Can be used with an even higher basic load capacity depending on the direction of tension ■ A notch bar impact test certificate can also be issued upon request *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "VRBS" is a welded ring shackle that ensures the necessary distance for root welding with a spacer for welding blocks. It features clearly marked basic working loads and wear markings that make disposal standards easily identifiable. (Patent obtained) By distributing the load through multi-point fixation, it is gentle on the suspended load and more compact, and the forged welding block is made from high-quality materials suitable for welding. 【Features】 ■ Distributes load through multi-point fixation ■ Gentle on suspended loads and compact ■ Suspension ring with a movable range of 180° ■ 100% basic working load even at 90° in the plane direction of the ring ■ Complies with BG/DGUV "GS-OA-15-04" *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "INOX-STAR" is a stainless steel rotating eye bolt that can rotate 360° and allows for the adjustment of the ring's orientation in the direction of the load. The materials used for the ring and bolt are duplex stainless steel, which has a very strong resistance to seawater and chlorine ions. Additionally, the bolt head is clearly stamped with the company name, screw size, manufacturing number, and strength class. 【Features】 ■ Pentagonal shape ■ 360° rotation ■ Basic load capacity clearly stamped ■ Complies with BG/DGUV "GS-OA-15-04" ■ Easy and quick attachment and detachment *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• others

The "ICE-LBG-SR (ICE Road Ring Super Rotation)" can be folded compactly and more flatly, making it a lifting point that allows for height space to be secured. It features wear markings (patented) that clearly indicate disposal standards at a glance. It rotates 360° and the suspension ring can move 180°. By enclosing double ball bearings, it eliminates bolt loosening during prolonged rotation under load. 【Features】 ■ Enclosed double ball bearings ■ Eliminates bolt loosening during prolonged rotation under load ■ Rotates 360° and the suspension ring moves 180° ■ Wear markings (patented) that clearly indicate disposal standards ■ Clearly engraved basic usage load *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• others

The "WBPG (Heavy Rotation Ring)" is a lifting point designed for super-large applications that can rotate 360°. It comes with standard bolts from Rudd that feature a unique corrosion-resistant surface treatment (CORRUD-DT). Additionally, the bolt head is clearly stamped with the company name, screw size, manufacturing number, and strength class. 【Features】 ■ For super-large applications ■ Basic load capacity: up to 250t ■ 360° rotation ■ Suspension ring is movable 180° ■ The suspension ring part has a shackle shape and is detachable *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• others

The "B-ABA (Omnidirectional Ring Plate)" is a lifting point with wear markings that clearly indicate disposal standards at a glance. It uses patented ICE bolts, which are strong against wear and bending even in low-temperature environments, and are of high strength. The bolt head is clearly engraved with the company name, screw size, manufacturing number, and strength class. 【Features】 ■ No noise generated even under strong vibrations or shock loads ■ Uses patented ICE bolts ■ Basic working load clearly engraved ■ Tested and certified by DGUV ■ Wear markings included for easy identification of disposal standards (patented) *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• others

The "Elebia EVO" from the Spanish company Elebia allows for remote lifting and releasing with simple remote control operations. The secret lies in the magnet near the hook that draws in the lifting gear and automatically adjusts it to the correct position. When the hook approaches, it pulls in the lifting gear and adjusts it to the correct position. After that, simply press the control button to close the hook, and you can lift it up. By not using human hands during the lifting and releasing of the hook, it not only saves time but can also be used in various locations where hands cannot be used. 【Features】 ■ Bearing-equipped swivel Swivel lock installation available (optional) ■ Load cell function (optional) ■ Detachable rechargeable lithium battery ■ Slip clutch structure protects the motor ■ Dust and waterproof standard IP65 certified *For more details, please download the catalog or contact us.

• Fittings construction
• Crane and others

The wireless load cell "Ron 2501-H" features: - Lightweight and compact design, suitable for use in rooms with low ceilings - Made from aerospace-grade steel, with an impact-absorbing design for durability - By offsetting the mounting holes by 90°, it reduces bending loads on the load cell, enhancing safety and accuracy Available in a wide range from 0.5t to 30t Battery life: 2000 hours with alkaline batteries (Upgradeable to 4000 hours as an option) Using a free app, multiple load cells can be monitored for load on smartphones, tablets, and PCs 【Features】 ■ Warranty period: 5 years ■ Lightweight & compact ■ High precision: ±0.1% full scale ■ Long wireless range ■ Excellent battery life ■ Compliant with ASME BTH-1 and IEC 61508 fatigue ratings *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• others

The "Elebia EVO" from the Spanish company Elebia is a hook that allows for remote lifting and releasing with simple remote control operations. The secret lies in the magnet near the hook opening, which draws the lifting equipment closer and automatically adjusts it to the correct position. When the hook approaches, it pulls the lifting equipment closer and adjusts it to the right position. After that, you just press the control button to close the hook, and then you can lift. Since the hook can be used for remote lifting and releasing, it reduces the risk of accidents by keeping the operator's hands free. Not only that, but it also contributes to increased work efficiency by shortening the time required for lifting and releasing. 【Features】 ■ Lineup of 2 to 20 tons / Different models available for up to 80 tons ■ Bearing-equipped swivel Swivel lock can be attached (optional) ■ Load cell function (optional) ■ Removable rechargeable lithium battery ■ Dust and waterproof standard IP65 certified ■ Options for special environments available *For more details, please download the catalog or contact us.

• Crane and others

A new product from the Spanish company elebia, the NEO Auto Hooking and Unhooking Device, has been introduced, enabling remote hooking and unhooking via wireless technology. By eliminating the need for human hands during hooking and unhooking, it not only reduces time but also enhances safety and efficiency. It can handle loads that traditional auto-opening and closing hooks could not lift, as well as large lifting points. (For 16t, it accommodates Φ100mm, and for 40t, Φ135mm.) 【Features】 ■ Remote operation via remote control ■ Bearing-equipped swivel ■ Fail-safe function that structurally prevents unhooking under load ■ Status display with high-brightness LED (NEO16 is optional) ■ Battery that operates for about a week with a 3-hour charge ■ Suitable for bell-type annealing furnaces *For more details, please refer to the PDF document or feel free to contact us.

• Crane and others
• others

The eTrack rail hoisting auto-clamp manufactured by Elebia is designed to easily lift, handle, and transport the rail section, which has a special shape, safely and reliably. It can lift up to 1.6 tons per unit! Remote operation allows for unmanned rail hoisting work, enhancing safety and significantly reducing work time. 【Features】 - Fail-safe design (safety design) - High-brightness LED status indicator clearly displays the condition of the eTrack! - Spring-loaded pins adjust the correct position of the rail clamp, centering the eTrack. You can check the operational image of the eTrack from the barcode reader included in the catalog! For more details, please download the catalog or contact us.

• Crane and others