ルッドスパンセットジャパン List of Products and Services

The "Drum Grab" is a drum lifting device manufactured by the Dutch company Lema. With a three-point securing hook and a patented polyurethane band, it is securely fixed in any condition, even under unexpected impacts. The 360° rotating ring allows for easy manual transportation of empty drums and makes it possible to lift fallen drums. 【Features】 ■ Safe against sudden impacts, collisions, and vibrations ■ Easy to install ■ Easy to transport ■ Suitable for lifting ■ No lid required *For more details, please refer to the PDF document or feel free to contact us.

• others

The JIS type eye bolts commonly used in the manufacturing and construction industries have a ring that rotates in the direction of the load, causing the screw to loosen and creating a gap with the mating surface, making lifting operations with these eye bolts very dangerous. Therefore, our rotating eye bolts are widely used by customers in various industries. However, when the mating side has screw taps such as "inch screws" or "parallel pipe threads," it is often unavoidable to use JIS type eye bolts with special screw specifications. Please consider this before an accident occurs. 【Features】 - Compatible with various screw standards (metric screws, inch screws, pipe threads, etc.) - Rich variety *For more details, please contact us or download the catalog.

• Work tools

The eye plates and shackles for loading and unloading that can be installed by construction machinery and machinery manufacturers are very dangerous for lateral pulling, and there is a risk of near misses and accidents. Additionally, homemade eye plates do not have load capacity markings, raising significant safety concerns. The welded lifting points manufactured by RUD in Germany are marked with load capacities for the weakest direction, allowing loads to be applied in any direction. They are suitable as lashing points for securing construction machinery, machinery, and vehicles. 【Features】 - Load capacity in all directions - Wide variety of options - Suitable for low-temperature environments *For more details, please contact us or download the catalog.

• Work tools

The eye plates and shackles for loading and unloading that construction machinery and equipment manufacturers can install themselves are very dangerous for lateral pulling, and there is a risk of near misses and accidents. Additionally, homemade eye plates do not have load capacity markings, raising significant safety concerns. The welded lifting points manufactured by RUD in Germany are marked with load capacities for the weakest direction, allowing for loads to be applied in any direction. They are optimal for securing construction machinery, equipment, and vehicles. 【Features】 - Load capacity in all directions - Wide variety of options - Suitable for low-temperature environments *For more details, please contact us or download the catalog.

• Work tools

The chain sling sets used in the manufacturing and construction industries require selecting dimensions that allow free movement within the hook of the overhead crane, as well as choosing the master link. If the master link is significantly smaller than the hook, concentrated loads can occur at the corners of the link, which is very dangerous. A width of the crane hook multiplied by 1.2 or more is necessary. Please select a dimension that allows the master link to move freely within the hook. 【Features】 - A variety of master links corresponding to the width of the crane - Child links included as standard, making hardware selection easy *For details, please contact us or download the catalog.

• Hoist/Crane
• Work tools
• Crane and others

【Features】 ■ Lightweight and easy to carry ■ No reduction in working load during adjustment ■ The hardware used in the Vario Web is made of strong forged materials ■ Hardware design minimizes belt wear ■ Belt slings, hooks, and length adjusters are color-coded according to working load to prevent incorrect connections ■ Parts replacement is also available ◎ For more details, please contact us or download the catalog.

• Work tools

This is a Dutch-made drum can lifting device. - With a three-point stop hook and a patented polyurethane band, it is securely fixed in any condition, even under unexpected impacts. - The polyurethane band is also excellent in chemical resistance. 【Features】 - It can be easily attached and detached by one person while holding the rotating ring, allowing for easy manual transportation of empty drum cans. - The 360° rotating ring also enables the lifting of fallen drum cans. For more details, please contact us or download the catalog.

• Work tools

Safe inversion work can be performed even on sharp edges. It features an easy-to-attach clip cover design. The two-layer construction of polyurethane and fibers prevents damage to both the belt and the suspended load.

• Safety and consumables

【Features】 ■ High-quality stainless steel shortening ■ Chain length adjustment is possible for the stainless steel chain sling ■ Easy parallel lifting

• Work tools

【Features】 ■ The stop latch is a robust forged product that is strong against lateral loads. ■ Compact design. ■ Attractive design with excess material trimmed away. ■ Eliminates snagging at the tip of the hook to prevent accidental incidents. ■ Please use a connector for connecting with the chain.

• Work tools

【Features】 ■ The stop latch is a strong forged product that is resistant to lateral loads. ■ Compact design. ■ Attractive design with excess material trimmed away. ■ Eliminates hooks that could snag, preventing accidental incidents. ■ For 13mm and 16mm, please use eye hooks and connectors.

• Work tools

The VIP Sling Chain System offers a wide range of accessories. In the ever-evolving work environment, the products used are always required to meet high standards of "safety," "durability," and "usability." RUD, which has been pursuing further challenges and safety since its founding, will continue to evolve and accelerate in the work environment that is constantly advancing. 【Product Lineup】 ○ VAK-1/2-28: Master link for single or double lifting ○ VB-28: MAXI end ring ○ VCGH-28: MAXI cobra hook ○ VV-28: MAXI multi shortening claw ○ VWBG 31.5: VWBG type vario ring, etc. For more details, please contact us or download the catalog.

• Work tools

The maxi chain sling for loads over 25 tons can be used for both single and double lifting by changing the setup method. It features a simple design with fewer connection points, making it lightweight. The pocket support type shortening claw maintains a locked state when unloaded, allowing for length adjustment without reduction. The newly designed VCGH-28 cobra hook has been lightweighted to the limit by removing unnecessary bulk. 【Features】 ○ Compatible with crane hooks 250mm wide ○ Uses a large master link ○ Chain for basic use load of 25 tons ○ 28mm×84mm (Grade V) chain ○ Manufactured from patented material ICE steel For more details, please contact us or download the catalog.

• Work tools
• Crane and others

Wire protection prevents damage to loads suspended by wire. It minimizes wire kinks and bends. We offer a single wire "SD" and a clip-type "SDC" for one wire (can be retrofitted). It cannot be used on sharp edges. 【Features】 - Prevents damage to loads suspended by wire - Minimizes wire kinks and bends - Single wire SD: recommended wire size 6–36mm - Single wire clip-type SDC: recommended wire size 8–20mm - Not for use on sharp edges For more details, please contact us or download the catalog.

• Work tools
• Safety and consumables

The lineup includes the “SKK” for chain slings and the “SKD” for wire ropes. Featuring highly durable Secutex material and a hinged structure, these pads ensure safe lifting operations while protecting both the load and the lifting equipment. [Features] ■ Reduces wear and damage at the edges of the load ■ Protects both the load and the lifting equipment simultaneously ■ Hinged structure allows for flexible fit to the load’s shape ■ Made from highly durable Secutex material [SKK (for Chain Slings)] ■ Special guide structure to hold chain links ■ Prevents chain slippage ■ Reduces the risk of damage to cargo [SKD (for Wire Ropes)] ■ Grooved structure to hold wire ropes ■ Prevents rope slippage ■ Reduces rope wear *For more details, please contact us or download the catalog.

• Work tools
• Safety and consumables

Chain Protection RSK prevents damage to loads suspended by chains. It is made of hard polyurethane and is available in five types with a maximum length of 2000 mm and chain diameters of 6 to 16 mm. It cannot be used on sharp edges. 【Features】 - Prevents damage to loads suspended by chains - Material: Hard polyurethane - Maximum length: 2000 mm - Chain diameter: 6 to 16 mm - Not for use on sharp edges For more details, please contact us or download the catalog.

• Work tools
• Safety and consumables

The edge protection "Clip-type Aluminum Chip Type SC-A" contains aluminum chips within the urethane, making the surface harder. The exceptionally strong fiber sling protection ensures safety not only for valuable products but also for the users. Installation and flipping are easy, and it is safe for sharp edges. 【Features】 ○ For super sharp edges with a radius of 2mm or less ○ External width: 48–330mm ○ Thickness: 25–45mm ○ Weight: 0.8–6.3kg/m For more details, please contact us or download the catalog.

• Work tools

The VIP Swivel Connector VWA rotates under load and does not rotate when unloaded. In the ever-evolving work environment, the products used are always required to meet high standards of "safety," "durability," and "usability." RUD, which has been pursuing further challenges and safety since its founding, will continue to evolve and accelerate in the work environment that will keep advancing. 【Features】 ○ Rotates under load ○ Chain nominal diameter: 6 to 22 mm ○ Basic working load: 1.2 to 16.0 tons ○ Weight: 0.2 to 6.8 kg For more details, please contact us or download the catalog.

• Work tools

The VIP PowerPoint Swivel UW-PP is a versatile swivel joint. It rotates smoothly with sealed ball bearings and is robust, rated for Grade 100. In the ever-evolving work environment, the products used are constantly required to meet high standards of "safety," "durability," and "user experience." RUD, which has been pursuing further challenges and safety since its founding, will continue to evolve and accelerate in the work environment. 【Features】 ○ World patented product ○ Versatile swivel joint ○ Basic working load: 0.5 to 8.0 tons For more details, please contact us or download the catalog.

• Work tools

The VIP overload indicator is an optional product for safer use. When approximately 1.8 times the load is applied to the chain, the gap in the center of the control ring disappears, and if the load exceeds that, it will stretch. Even if it is destroyed, the safety chain prevents the chain from breaking. In the ever-evolving work environment, the products used are always required to meet high standards of "safety," "durability," and "usability." RUD, which has been pursuing further challenges and safety since its founding, will continue to evolve and accelerate in the work environment that will keep advancing. 【Components of the Overload Indicator】 ○ VIP Coupling (VVS) ○ VIP Control Link (VCG) ○ VIP Safety Link (V Chain × 3 Links) For more details, please contact us or download the catalog.

• Work tools
• Rock drills, demolition machines, and excavators

The VIP Wire Connector VRG is available in seven types with a chain nominal diameter of 6 to 22 mm and a basic working load of 1.2 to 16.0 tons. In the ever-evolving work environment, the products used are constantly required to meet high standards of "safety," "durability," and "usability." RUD, which has been pursuing further challenges and safety since its founding, will continue to evolve and accelerate in the work environment that is advancing rapidly. 【Features】 ○ Wire Connector ○ Chain nominal diameter: 6 to 22 mm ○ Basic working load: 1.2 to 16.0 tons ○ Weight: 0.07 to 3.5 kg For more details, please contact us or download the catalog.

• Work tools

The VIP Insulated Sling Set V-SIG is an insulated shackle compatible with 1,000V. It prevents overcurrent from flowing into cranes and hoists during welding operations while lifting. In the ever-evolving work environment, there is a constant demand for high standards of "safety," "durability," and "user experience" in the products used. RUD, which has been pursuing further challenges and safety since its founding, will continue to evolve and accelerate in the work environment that spans over a century. 【Features】 ○ Insulated shackle compatible with 1,000V ○ Chain diameter: 6 to 16mm ○ Basic working load: 1.2 to 8.0 tons ○ Weight: 1.4 to 13.1kg For more details, please contact us or download the catalog.

• Hoist/Crane
• Work tools
• Crane and others

The VIP Shackle VV-SCH/VC-SCH is used to connect chains and fittings. The pin rotates 360 degrees at all times, preventing uneven wear. In the ever-evolving work environment, the "safety," "durability," and "usability" of the products used are always required to meet high standards. RUD, which has been pursuing further challenges and safety since its founding, will continue to evolve and accelerate in the work environment that is advancing. 【Features】 ○ The pin rotates 360 degrees at all times, preventing uneven wear ○ Chain nominal diameter: 6 to 16mm ○ Basic working load: 1.2 to 22.4 tons ○ Weight: 0.1 to 5.9kg For more details, please contact us or download the catalog.

• Work tools

The VIP High Dynamic Shackle VV-GSCH is used to connect chains and fittings. The pin always rotates 360 degrees to prevent uneven wear. In the ever-evolving work environment, the "safety," "durability," and "usability" of the products used are always required to be at a high standard. RUD, which has been pursuing further challenges and safety since its founding, will continue to evolve and accelerate in the work environment that is advancing. 【Features】 ○ The pin always rotates 360 degrees to prevent uneven wear ○ Chain nominal diameter: 6 to 22 mm ○ Basic working load: 1.2 to 16.0 tons ○ Weight: 0.15 to 6.7 kg For more details, please contact us or download the catalog.

• Work tools

The VIP Tensioner VKSPS/VLE can be integrated into the chain set for precise adjustments. Length adjustments are made by rotating the central lever. It is compatible with chains from 6mm to 28mm from RUD Lifting Japan Co., Ltd. In the ever-evolving work environment, the products used are constantly required to meet high standards of "safety," "durability," and "usability." RUD, which has been pursuing further challenges and safety since its founding, will continue to evolve rapidly in the work environment. 【Features】 ○ Tensioner that allows for precise adjustments ○ Easy to level ○ Basic working load: VKSPS 1.2 to 8 tons / VLE 12.8 to 25.0 tons ○ Weight: VKSPS 0.9 to 8.8 kg / VLE 18.1 to 44.0 kg For more details, please contact us or download the catalog.

• Work tools

The VIP shortening hook VVH does not require a reduction in working load. The optimal link protection design stabilizes the chain and allows for adjustments. The curved design of the chain pocket prevents the chain from accidentally coming off. In the ever-evolving work environment, the products used are always expected to meet high standards of "safety," "durability," and "usability." RUD, which has been pursuing further challenges and safety since its founding, will continue to evolve and accelerate in the future work environment. 【Features】 ○ The tip of the hook is thickened to prevent incorrect usage ○ Chain call diameter: 6 to 22 mm ○ Basic working load: 1.2 to 16.0 tons ○ Weight: 0.25 to 11.0 kg For more details, please contact us or download the catalog.

• Work tools

The VIP Cobra Hook Eye Type VCOH is available in six types with a chain call diameter of 4 to 16 mm and a basic working load of 0.5 to 8.0 tons. In the ever-evolving work environment, the products used are constantly required to meet high standards of "safety," "durability," and "usability." RUD, which has been pursuing further challenges and safety since its founding, will continue to evolve and accelerate in the work environment that is advancing rapidly. 【Specifications】 ○ Chain call diameter: 4 to 16 mm ○ Basic working load: 0.5 to 8.0 tons ○ Weight: 0.14 to 4.2 kg For more details, please contact us or download the catalog.

• Work tools

The safety points for fall prevention protect the safety of workers at heights. There are PSA type/PSA-INOX type (duplex stainless steel) options available, as well as long bolt types in the lineup. The lifting points that support and safeguard products and human lives are designed to be stronger, more versatile, and safer... They are products that embody the history and wisdom of RUD. 【Features】 ○ Environmentally friendly product ○ Fall prevention lifting points ○ BG BAU DIN EN 795 ○ Number of users specified according to European standards ○ M12 is for one person, M16 and M20 are for two people For more details, please contact us or download the catalog.

• Work tools
• Safety and consumables

The TAP series of lifting collections for wind power generation is ideal for lifting and raising towers. It connects with hooks, shackles, and belts. It features a pitch adjustment function to match flange holes, and the Vario type can accommodate flange diameters of 2 to 6 meters. The lifting points that support products and human lives are designed to be stronger, more versatile, and safer... This is a product that crystallizes RUD's history and wisdom. 【Features】 - Environmentally friendly product - Ideal for lifting and raising towers - Pitch adjustment function to match flange holes - Connects with hooks, shackles, and belts - Vario type accommodates flange diameters of 2 to 6 meters For more details, please contact us or download the catalog.

• Work tools

This is an introduction to our conversion adapter "ASPA/AP." It allows you to change the size of the lifting point using an existing male thread. Additionally, the basic working load is the same as that of the installed lifting point. The use of thread locking agents such as Loctite is recommended to prevent loosening. Compatible products include the "Power Point Series" and "Vario Ring," among others. 【Features】 ■ Changes the size of the lifting point using an existing male thread ■ The basic working load is the same as that of the installed lifting point ■ The use of thread locking agents such as Loctite is recommended ■ Other sizes not listed can also be manufactured *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The master links that can be lifted by a crane or hoist under the hook of a chain sling come in five types of master links for one chain size, with different widths and sizes. Depending on the number of chains used, we offer dedicated options for single, double, triple, and quadruple lifting.

• Hoist/Crane
• Work tools
• Crane and others

The master links that can be lifted by a crane or hoist under the hook of a chain sling come in five different types for one chain size, with varying widths and sizes. Depending on the number of chains used, we offer dedicated options for single, double, triple, and quadruple lifting.

• Hoist/Crane
• Work tools
• Crane and others

Supports from 4mm to 22mm. Depending on the number of chains, we offer options for single, double, and dedicated triple or quadruple suspensions.

• Work tools

The master links that can be lifted by a crane or hoist under the hook of a chain sling come in five different types for one chain size, with varying widths and sizes. Depending on the number of chains used, we offer dedicated options for single lifting, double lifting, and dedicated options for triple and quadruple lifting.

• Hoist/Crane
• Work tools
• Crane and others

It can be connected to shackles, wires, and belt slings. It can be directly connected to a power point swivel.

• Work tools

The ICE series has achieved a strength increase of over 60% compared to the G80. To manufacture grade 120, we started from scratch by formulating the materials and developed an optimal material (patent obtained) that is completely different from conventional materials. For more details, please download the catalog.

• others

The connection fitting "ICE Star Hook" can be used at temperatures down to -60°C. It maintains the same mouth width as the Grade 80 series hooks. The safety latch can be used directly from the previously sold Cobra hooks. The technology developed for Cobra hooks has been inherited by the Star Hook. For more details, please download the catalog.

• Work tools

The ICE series has achieved a strength increase of over 60% compared to the G80. To manufacture grade 120, we started from scratch by formulating the materials and developed an optimal material (patent obtained) that is completely different from conventional materials. For more details, please download the catalog.

• Work tools

The ICE series has achieved a strength increase of over 60% compared to the G80. To manufacture grade 120, we started from scratch by formulating the materials and created an optimal material (patent obtained) that is completely different from conventional materials. For more details, please download the catalog.

• Work tools

The ICE series has achieved a strength increase of over 60% compared to the G80. To manufacture grade 120, we started from scratch by formulating the materials and created an optimal material (patent obtained) that is completely different from conventional materials. For more details, please download the catalog.

• Work tools

The ICE series has achieved a strength increase of over 60% compared to the G80. To manufacture grade 120, we started from scratch by formulating the materials and created an optimal material (patent obtained) that is completely different from conventional materials. For more details, please download the catalog.

• Work tools

The ICE series has achieved a strength increase of up to 60% compared to the G80. To manufacture grade 120, we started from scratch by formulating the materials and created an optimal material (patent obtained) that is completely different from conventional materials. For more details, please download the catalog.

• Hoist/Crane
• Work tools
• Crane and others

The ICE series has achieved a strength increase of over 60% compared to the G80. To manufacture grade 120, we started from scratch by formulating the materials and created an optimal material (patent obtained) that is completely different from conventional materials. For more details, please download the catalog.

• Hoist/Crane
• Work tools
• Crane and others

The ICE series has achieved a strength increase of up to 60% compared to the G80. To manufacture Grade 120, we started from scratch by formulating the materials and created an optimal material (patent obtained) that is completely different from conventional materials. For more details, please download the catalog.

• Hoist/Crane
• Work tools
• Crane and others

The ICE series has achieved a strength increase of over 60% compared to the G80. To manufacture grade 120, we started from scratch by formulating the materials and developed an optimal material (patent obtained) that is completely different from conventional materials. For more details, please download the catalog.

• others