工ムアイモルデ List of Products and Services

"Green Chip CMF" is a biomass plastic that contains a high proportion of cellulose fiber, a natural material, mixed with polypropylene and polyethylene resins. This product is a joint development by Tabakawa Paper Co., Ltd. and FP Chemical Industry Co., Ltd. Additionally, thanks to a dry special mixing method, it is more cost-effective compared to conventional cellulose fiber composite resins while possessing excellent characteristics such as the dispersibility of cellulose fiber and flowability during molding. Our company manufactures molded products utilizing "Green Chip CMF." Please feel free to contact us. [Environmental Considerations] - Reduction in the use of petroleum-derived resins - High incorporation of cellulose fiber made possible by the dry special mixing method - Products containing over 51% cellulose fiber can be disposed of as combustible waste, similar to paper products. *For more details, please refer to the PDF document or feel free to contact us.

• Synthetic Resin Plywood
• Environmental Survey
• Cellulose Fiber

"Biodegradable resin" is a material that is primarily made from corn and sugarcane and is less likely to negatively impact the natural cycle as it is broken down by microorganisms into water and carbon dioxide. There is a challenge in the injection molding of biodegradable resin due to its high sugar content and very high viscosity, which can lead to molding defects. Therefore, it is necessary to set the thickness of the mold, as well as the position and diameter of the gates, and the molding conditions according to the properties of the material. Our company can handle everything from design to mass production, and we are capable of responding to various customer requirements regarding materials and shapes. 【Features of Injection Molding Technology】 - Reducing material costs by thinning the wall thickness - Improving material yield by enhancing the mold - Developing mold structures that can produce multiple parts in a single molding process - Enabling mass production at market prices comparable to petroleum-based plastic products *For more details, please refer to the PDF document or feel free to contact us.

• Synthetic Resin Plywood
• Environmental Survey
• Other resource recycling

We would like to introduce a case study of environmentally friendly product development being conducted by Kōmuaimoru Corporation. We received an inquiry from a certain hotel managed by a brand owner, expressing their desire to use environmentally friendly materials for the amenities used in the hotel. In response, we proposed products that could be made from environmentally friendly materials, such as tissue cases and hangers, and addressed the inquiry by securing an order. We also have other case studies to share. Please take a look. 【Industries of Case Studies】 ■ Cleaning Companies ■ Convenience Stores ■ Hotels ■ Apparel ■ Floral Industry *For more details, please refer to the PDF materials or feel free to contact us.

• Synthetic Resin Plywood
• Environmental Survey
• Other resource recycling

With the digital mold (R) technology "Real Flow Analysis" using a 3D printer, shapes that cannot be calculated by CAE analysis can be verified for flowability by directly pouring resin into a 3D printed insert. "Faster and more accurately..." you can transition your design to the next phase. 【Features】 ○ Verify resin flowability without creating a mold ○ Inject actual standard resin used in resin inserts ○ Short points are immediately visible For more details, please contact us or download the catalog.

• others

"D1+(D1 Plus)" is a next-generation thermal insulation cover wrapped in a heat-resistant sheet, made from a special porous silica insulation mat (product name: ONBM). With a thermal conductivity of 0.018 W/mK, it surpasses that of still dry air, boasting a thermal conductivity that is 5 to 10 times lower than that of conventional insulation materials like glass wool, which have been used in the heat dissipation parts of machinery and equipment. This characteristic allows for a thickness of just 6mm, achieving space-saving during installation and reducing interference with surrounding components. Additionally, it has a heat resistance performance capable of withstanding temperatures up to 650 degrees Celsius. For more details, please contact us or download the catalog.

• glass wool
• others

"D1+ | D1 Plus" is the strongest insulation cover that achieves an ultra-low thermal conductivity of 0.02 Wm/K, surpassing even dry still air, with a thickness of only 6mm. Thanks to this thinness and complete tailor-made design, it can be installed in narrow spaces in your preferred shape. For example, when installed on the heating cylinder of an injection molding machine, it can save over 27% of the product's electrical energy consumption. It can accommodate all shapes, from ducts to stock pots. It is also listed in the Ministry of Land, Infrastructure, Transport and Tourism's 2012 Know-how and Technology Transfer Support Project "Technology Matching Database." http://www.yoi-kensetsu.com/match/jirei/053-01.html

• Insulation work

The 'Thread-Cutting Samurai' is a cartridge-type spool bush designed to prevent 'thread pulling' that occurs during molding. It has been jointly developed with customers and a utility model has been registered. ○ Several benefits are expected from cutting the thread: 1. Reduction of molding defects caused by thread pulling! 2. Increased cycle efficiency! 3. Material savings! *If you are interested or facing issues, please feel free to contact us or download the catalog.

• others

"Burn Boy" makes it difficult for heat to transfer by incorporating an air layer into the coating. As a result, even at a surface temperature of 370°C, it is hard to melt ice. ↓↓↓ Here is the reference video ↓↓↓ http://www.youtube.com/watch?v=dHLSaFr-uGU&feature=youtu.be This idea was born from applying insulation technology used at the tip of rockets. The insulation method created by advanced technology is a paint that can play a role in various places with new ideas. For example, it can prevent instant burns. You can touch it at a surface temperature of 100°C for 5 to 10 seconds, or at 200°C for about 2 seconds. It is said that touching something at 70°C for 4 seconds usually results in a burn. Additionally, it can protect heat sources from cold outside air, which helps reduce power consumption.

• Heat-shielding materials
• paint
• Insulation work

DR and VA proposals from the design, development, and prototyping stages!

• others

Achieve weight reduction and increased design freedom!!! 【Features】 ○ Both framed and frameless terminal shape processing are acceptable ○ Detailed dimensions will be determined in consultation with the customer ○ Processing method is [All NC processing] ○ Significant reduction in lead time and costs compared to conventional discharge machining *For more details, please refer to the catalog or feel free to contact us.

• others

Consistent, completely paperless mold manufacturing up to the final finishing process.

• others