LOCKMAN List of Products and Services

This catalog is the "Comprehensive Catalog of Security Equipment" from Lockman Japan Co., Ltd., which manufactures and sells security devices. It features standard products such as the outdoor-compatible electromagnetic electric lock "LC-4500DLSS," the waterproof keypad-integrated card reader "ST-120" that can be installed outdoors, and the control panel "LK-8000" compatible with the entire VOLCALOCK lineup. All electronic locks are equipped with an auto-lock function. We offer a wide range of products, including the "LC-105," which can be installed without modification on applicable locks, and the sliding door-compatible "ID-602Bhook." [Contents (excerpt)] ■ Introduction to the VOLCALOCK system ■ VOLCALOCK electric locks ■ Non-contact readers and unlocking switches ■ Electronic locks and digital door lock series ■ Dimple key cylinder Mega Cross series *For more details, please refer to the PDF document or feel free to contact us.

The "LC-4500DLSS" is our original electromagnetic electric lock that controls locking through the ON/OFF of the power supply. It locks by adhesion between surfaces. Compared to deadbolt types, it has a structure that is less prone to operational failures due to door warping. Additionally, since it is surface-mounted, it can be installed not only on new doors but also on various existing doors such as gates, sliding doors, and swinging doors. There is also a waterproof type of electromagnetic lock available, making it suitable for outdoor installation. 【Features】 ■ A locking type that reliably unlocks when powered ■ Locks through adhesion between surfaces, strong against door warping ■ Abundant mounting hardware and excellent workability ■ A safe structure that can be used long-term ■ Achieves system construction at a low cost *For more details, please refer to the PDF document or feel free to contact us.

The "LC-4500DLSS" is a waterproof electromagnetic electric lock that can be installed both indoors and outdoors, featuring a compact design with a holding force of 200Kg. We offer a variety of mounting brackets suitable for different types of doors, including outdoor gates, sliding doors, and swinging doors. It is capable of outputting signals for locking, door closing, lock/unlock status, and door open/close status. Additionally, it supports a rated voltage of both DC12V and DC24V. The mounting screw holes are located at the front and side, allowing installation from either the front or side. 【5 Reasons】 ■ Built-in double sensor for locking/door closing signals ■ Abundant mounting brackets ■ Compatible with DC12/24V ■ Suitable for outdoor installation ■ Standard model in stock *For more details, please refer to the PDF document or feel free to contact us.

◯ Product Features - A compact waterproof electromagnetic electric lock with a holding force of 200 kg, suitable for installation both indoors and outdoors. - Mounting screw holes are provided on the front and side, allowing installation from either the front or side. - A variety of mounting brackets are available for installation on various types of doors, including outdoor gates, sliding doors, and hinged doors. - Built-in locking signal (LSS) and door closed signal (DSS) allow for contact output of locking/unlocking status and door open/close status. - Locking signal/door closed signal is provided on both sides, enabling a wider detection range for the signals.

◯ Product Features - A waterproof electromagnetic electric lock with a compact design and a holding force of 200 kg, suitable for installation both indoors and outdoors. - Mounting screw holes are provided on the front and side, allowing installation from either the front or side. - A variety of mounting brackets are available for installation on various doors, including outdoor gates, sliding doors, and hinged doors. - Built-in locking signal (LSS) allows for contact output of the locking and unlocking status.

We would like to introduce the "mounting brackets" compatible with the LC-4500DLSS and LC-4500FS. We have a wide range of products including the "BL-45FS-G10" for outward-opening mounting brackets, the "BL-45FS-M05" for inward-opening mounting brackets, and the "BL-4500L set2" for sliding door mounting brackets and suction plates. 【Product Lineup】 ■ Outward-opening mounting brackets ■ Inward-opening mounting brackets ■ Sliding door mounting brackets *For more details, please refer to the PDF document or feel free to contact us.

◯ Product Features - With its strong adhesion, it is ideal for medium-sized gates and doors such as service entrances. - It is waterproof, making it suitable for installation both indoors and outdoors. - Installation screw holes are provided on the front and side, allowing for installation from either the front or side. - A variety of mounting brackets are available for installation on various doors, including outdoor gates, sliding doors, and swinging doors. - It has built-in locking signal (LSS) and door closing signal (DSS), enabling output for the locking/unlocking status and the open/close status of the door.

◯Product Features - With a powerful suction force of 680Kg, it is ideal for large gates in factories, schools, and financial institutions. - It is waterproof, making it suitable for installation both indoors and outdoors. - We offer mounting hardware for sliding doors. - Built-in locking signal (LSS) allows for contact output of locking and unlocking status.

The "LC-EM2100LSS" is a compact electromagnetic lock with a built-in locking signal contact that allows for a voltage-free contact output when locked. It is rated for a DC24V voltage and locks through magnetic attraction only when powered. It is designed to minimize operational failures due to door warping and automatically unlocks when power is cut off. There are screw holes on the front and side, allowing for installation from either the front or side. Wiring can also be accessed from either the side or back, making it adjustable to fit the installation location. 【Features】 ■ Built-in locking signal contact, capable of voltage-free contact output when locked ■ Compact size with a variety of mounting brackets, excellent installation flexibility ■ Mounting brackets available for inward and outward opening doors ■ Suitable for security/management locks and cabinet/industrial locks ■ Holding force: 50Kg *We often receive inquiries from system companies regarding integration with their devices, and we provide various proposals. If you are considering collaboration with your unlocking device or system, please feel free to contact us.

The "LC-EM3000AL Plus" is a compact and easy-to-install electromagnetic lock with a maximum side length of 100mm. It supports rated voltages of DC12V/24V and locks through adhesion between surfaces only when powered. It is less likely to malfunction due to door warping and automatically unlocks when power is cut off. There are screw holes on the front and side, allowing for installation from either the front or side. By using brackets for inward or outward opening doors, it can accommodate various installation locations. 【Features】 ■ Strong adhesion locking resistant to door warping ■ Installable from both front and side ■ Rated IP65 for outdoor use ■ Suitable for locking cabinets with a maximum side length of 100mm *For more details, please refer to the materials available for download in the "PDF Download" section.

◯Product Features - This is an indoor electromagnetic lock that allows you to check the locking status with large red and green LEDs. - It can accommodate various applications such as factories, hospitals, and nursing facilities where lock confirmation is necessary. - Mounting brackets for both inward and outward opening doors are available. - It has built-in locking signal (LSS) and door closed signal (DSS), and can output contact signals for locking/unlocking status and door open/close status.

◯ Product Features - This is an embedded electromagnetic lock for sliding doors that does not affect the design of the door. - The electromagnetic lock has no moving parts and operates quietly, making it ideal for hospitals and care facilities. - It has built-in locking signal (LSS) and door closing signal (DSS), and can provide contact output for locking/unlocking status and door open/close status. - The door closing signal is provided on both sides, allowing for a wider detection range of the signals.

◯Product Features - It is a deadbolt type electric lock with power-on locking. - With a 25.6mm front, it can be embedded in standard door thicknesses (30-36mm). - It uses a solenoid mechanism for instant locking and unlocking. - It has built-in locking signal (LSS) and door closed signal (DSS), allowing for contact output of locking/unlocking status and door open/close status.

The "SL-130L" is an electric lock with a deadbolt mechanism that can maintain locking during a power outage. With a 25mm front, it can be embedded in standard door thickness doors. It also features built-in locking signal (LSS) and door closed signal (DSS), allowing for output of locking/unlocking status and door open/close status. Additionally, the "SL-130N," which does not have an emergency unlocking cylinder, is also available in the lineup. 【Features】 ■ With a 25mm front, it can be embedded in standard door thickness (30-36mm) doors ■ Allows confirmation of the locking/unlocking status of the electric lock and the open/close status of the door ■ Power supply is DC12V *For more details, please refer to the PDF document or feel free to contact us.

The "LC-CCW15S" is a compact electromagnetic lock that can accommodate various applications. It can be installed on lockers, key boxes, and is suitable for auxiliary locks on lightweight doors. Additionally, it supports both DC12V and DC24V power supply. 【Features】 ■ Compact electromagnetic lock ■ Suitable for security/management locks and cabinet/industrial locks ■ Rated voltage: Compatible with DC12/24V, Holding force: 80Kg *For more details, please refer to the PDF document or feel free to contact us.

◯ Product Features - It is a compact electromagnetic lock with built-in pre-intrusion alarm contacts. - If an attempt is made to pry open the electromagnetic lock, a pre-intrusion alarm signal (EW) is output through the contacts. - It has built-in locking signal (LSS) and door closed signal (DSS), allowing for contact output of the locking/unlocking status and door open/close status. - Mounting brackets for both inward-opening and outward-opening doors are available.

The "LC-ES2000" is a compact electric strike lock designed to be used in combination with an automatic locking type lock. It can be set to two operating modes: locking when powered and unlocking when powered. It can withstand a side pressure of 500 kg. The power supply is compatible with both DC 12V and 24V. 【Features】 ■ Compact electric strike lock ■ Switchable locking method: locking when powered / unlocking when powered ■ Rated voltage: compatible with DC 12/24V *For more details, please refer to the PDF document or feel free to contact us.

The "LC-CL0001" is a compact deadbolt electric lock (indoor use). It is used for cabinets, lockers, key boxes, etc. The operation mode can be set to lock when powered and unlock when powered, with two pattern settings available. Additionally, automatic locking is also possible. 【Features】 ■ Hook-type electric lock ■ Suitable for locker/cabinet doors ■ Locking method can be switched between power-on locking and power-on unlocking ■ Rated voltage: DC12 compatible *For more details, please refer to the PDF document or feel free to contact us.

- The locking method can be switched between power-on locking type and power-on unlocking type. The power-on locking type unlocks when the power is OFF, while the power-on unlocking type unlocks when the power is ON. You can switch the settings according to your operation and system. - Compatible with system construction with other devices, supporting DC12V/DC24V and equipped with door-closed signal/locking signal. This product is compatible with rated voltages of DC12V/DC24V and has built-in sensors for detecting door closure (door-closed signal) and locking (locking signal). The sensors enable voltage-free contact output when detected. It is compact and can accommodate switching of locking methods, and many system companies have adopted it in conjunction with their own products. * The initial setting (at the time of shipment) is set to "power-on unlocking type." Please configure the locking method settings according to your operational needs. (*As of September 2023) * When operating in the power-on unlocking type, you will not be able to control the unlocking/locking of this unit in case of malfunction or failure. Please check the response in case this unit becomes inoperable in advance.

We will introduce a case where the Rockman System, providing peace of mind, was implemented in a hospital. The purpose of the implementation included improving the inconvenience of managing and using keys, automating locking, restricting access, respecting the privacy of residents, recording usage history, managing access, and ensuring the safety of residents. We introduced a contactless card reader compatible with FeliCa/MIFARE, the "LK-3000." It can also be installed on sliding doors, and the locking and unlocking sounds are very quiet. The access history management system allows the usage history of the reader to be saved to an SD card. 【Case Study】 ■ Hospital ■ Objectives - Improve the inconvenience of managing and using keys - Automate locking and restrict access - Respect the privacy of residents - Record usage history, manage access, and ensure the safety of residents ■ Products Introduced - Contactless card reader compatible with FeliCa/MIFARE, "LK-3000" - Control panel for the above product, "LK-5000" - Electromagnetic electric lock for sliding doors (embedded type), "LC-EM275DSS" - Unlock switch, "SW-60A" *For more details, please refer to the PDF document or feel free to contact us.

We will introduce a case where the reliable Rockman system was implemented in a nursing facility. The purpose of the implementation was to automatically lock emergency exits and to enable simultaneous unlocking of emergency exits in conjunction with fire alarms. We introduced the outdoor-compatible electromagnetic electric lock "LC-4500DLSS" and VOLCALOCK "LK-8000." These can be installed in various locations, including sliding windows. They are linked with fire alarms, allowing for simultaneous unlocking of electric locks in emergencies. [Case Study] ■ Nursing Facility ■ Objectives - Automatic locking of emergency exits - Simultaneous unlocking of emergency exits in conjunction with fire alarms ■ Products Introduced - Outdoor-compatible electromagnetic electric lock "LC-4500DLSS" - VOLCALOCK "LK-8000" *For more details, please refer to the PDF document or feel free to contact us.

Access control history management system compatible with FeliCa/MIFARE cards, selectable for standalone/network operation. ● Your IC commuter pass or mobile phone can serve as a key! → If compatible with Felica, up to 2,000 ID cards (keys) can be registered. ● All settings, including individual registration and deletion, can be done on-site without a computer. ● Access history can be recorded without software, up to 50,000 entries. ● Up to two card readers can be connected to a single control panel. ● In emergencies such as fires, all locks can be released simultaneously. ● Remote operation is also possible. Download the catalog for detailed features and specifications! *Felica is a registered trademark of Sony Corporation.

Our company is engaged in the development of electromagnetic electric locks and digital locks (electronic locks), and we have a wealth of experience in proposing security systems tailored to customer needs. We have now established a "Consultation Desk for Electric Locks" that can be used by both individuals and corporations. Inquiries can be made through the link below. *Estimates and consultations are free. 【Recommended for those with the following concerns】 ■ Unsure if the product they currently have is compatible ■ Don't know which product to choose ■ Would like suggestions for electric locks that fit their budget and requirements ■ Want to know about wiring and installation methods *We are currently offering materials on electromagnetic electric locks that can be installed on various doors and electronic locks suitable for sliding doors. You can view them immediately by clicking the download button. Feel free to reach out with any inquiries. ★ The "Consultation Desk for Electric Locks" can be accessed through the link below.