未来工業 List of Products and Services

A mesh-structured cable rack suitable for small-scale wiring routes, as well as for cable racks in food factories, and for laying wiring and communication lines in data centers, server rooms, and office floors. 【Features】 ○ Lighter than typical iron ladder-type cable racks ○ Low stacking height of less than 1/3, making transportation and management efficient ○ Easy and quick connections ○ Straight racks can be transformed on-site ・Free processing for vertical and horizontal adjustments ・By combining parts, it is possible to create L-shaped, cross-shaped, and T-shaped branching racks, as well as horizontal bend racks and outside/inside bend racks ○ Cables can be wired from the side of the rack ・Freely combine step-hanging hangers and hangers for step-hanging ・User-friendly design that prevents cable damage ・Three prominent colors make wiring systems easy to identify at a glance ● If you would like a catalog, please contact us through the request for materials.

The "Lightweight Box" is a slide box that is easy to install on lightweight studs (lightweight steel). It comes with a "holding flange" that can be securely held with one hand. It does not slip when using an impact driver, allowing for reliable work. *The flange is removed after securing. 【Features】 ■ Easy to install on lightweight studs (lightweight steel) ■ Comes with a "holding flange" that can be securely held with one hand ■ Does not slip when using an impact driver, allowing for reliable work *For more details, please refer to the PDF document or feel free to contact us.

"The Mag Hand" is a powerful magnet used for temporarily securing the retaining flange when installing the "Light Gap Box" and "Light Gap Series." It is convenient for areas where manual holding is difficult, and it can be installed regardless of the orientation. [Features] ■ Convenient for areas where manual holding is difficult ■ Can be installed regardless of orientation *For more details, please refer to the PDF materials or feel free to contact us.

The "Bushing Punch" is a bushing insertion tool for ceiling substrate materials that features simultaneous hole drilling and bushing installation, making it efficient in construction. By setting the wiring bushing and using a single punch on the double bar, it achieves a flat finish without any protrusions. Additionally, we also introduce the "wiring bushing" specifically for this product. 【Features (Bushing Punch)】 ■ Efficient construction ■ One action for drilling and installing ■ Set the wiring bushing and punch once on the double bar to achieve a flat finish without protrusions *For more details, please refer to the PDF document or feel free to contact us.

The "Cable Stapler" is a tool for securing cables to walls and other surfaces. Simply place the main body against the cable and squeeze the lever to easily secure F cables. It comes with a resin guard, so it won't damage the F cables. Additionally, it features an adjuster that allows the use of two types of staples with one device. You can continuously drive staples, and even if you dry fire, the tip of the staple won't protrude, ensuring safety. We also offer "staples" specifically for this product. 【Features (Cable Stapler)】 ■ Easily secure F cables by simply placing the main body against the cable and squeezing the lever ■ Improved work efficiency ■ Comes with an adjuster for size changes ■ Compatible with two types of staples ■ Resin guard included to prevent damage to F cables *For more details, please refer to the PDF document or feel free to contact us.

Wireframe shape that allows for construction not possible with ladder-type systems, EG Rack Series Miramesh 【Features】 ○ Lighter than typical steel ladder-type cable racks ○ Low stacking height of less than 1/3, making transportation and management efficient ○ Easy and quick connections ○ Straight racks can be transformed on-site ・Free processing for vertical and horizontal adjustments ・By combining parts, it is possible to create L-shaped, cross-shaped, T-shaped branching racks, horizontal bend racks, and outside/inside bend racks ○ Cables can be wired from the side of the rack ・Freely combine step-hanging hangers and hangers for step-hanging ・User-friendly design that does not damage cables ・Three prominent colors make wiring systems easy to identify at a glance ● If you would like a catalog, please contact us through the request for materials.

The "Power Supply Pole" is a product handled by Mirai Industry Co., Ltd., which is very convenient for securing power in places without walls or far from walls. Available at a reasonable price, it can be installed in gardens, parking lots, and more. It can be used for various purposes such as waterproof outlets, EV outlets, motion sensors, and intercoms, and its smart appearance does not detract from the ambiance of the building. We offer a wide variety, including the "Concrete Buried Type" and "Anchor Fixed Type." 【Features】 ■ Reasonably priced with a neat appearance ■ Now includes a round type (made of aluminum) ■ Very convenient for securing power in places without walls or far from walls ■ Does not compromise the ambiance of the building ■ A wide variety is available *For more details, please refer to the PDF document or feel free to contact us.

The "Electric Meter Box (Outdoor)" is a product handled by Mirai Industrial Co., Ltd. designed for concealed wiring. This product, specifically designed for smart meters, features a stylish and sharp design that does not compromise aesthetics. It is rainproof, preventing the intrusion of rainwater and insects. There are five color variations available, including "Beige" and "Milky White," ensuring the best match for any wall. 【Features】 ■ Specifically designed for smart meters ■ Stylish design ■ Concealed type ■ Best matching for any wall ■ Rainproof to prevent the intrusion of rainwater and insects *For more details, please refer to the PDF document or feel free to contact us.

The "Taika Black Fireproof Sheet" is a versatile fireproof material that can be used for round holes and rectangular openings. It features an ultra-simple installation that only requires wrapping it around pipes. The mesh version can slide, allowing for installation even when the pipes are fixed in place. Additionally, in the case of hollow walls, reinforcement for openings is unnecessary. For floor penetrations, installation can be done from above the floor. Furthermore, it is lightweight, making it easy to transport, and when exposed to temperatures above 300°C, it expands more than twice its size to prevent the spread of fire. 【Features】 ■ Easy installation by simply wrapping around pipes ■ Simple material consisting only of the sheet ■ Stable finish due to the simplicity of installation ■ Expands more than twice its size to prevent the spread of fire *For more details, please refer to the PDF document or feel free to contact us.

The "Fireproof Material Taika Black Resin Box Method" is a construction method that combines products we handle, such as "Steel-Covered Slide Boxes" and "Fireproof Bushings," making it ideal for wooden structures. We select "Boxes," "Box Wiring Components," and "Filling Materials" according to the construction requirements. 【Features】 ■ Newly acquired certification for 60-minute fire resistance ■ Optimal for wooden structures ■ "Resin Boxes" can be used in fireproof compartments ■ Selection of "Boxes," "Box Wiring Components," and "Filling Materials" according to construction needs *For more details, please refer to the PDF materials or feel free to contact us.

The "Steel Cover Slide Box" is a product handled by Mirai Industry Co., Ltd., designed for buildings that comply with quasi-fire-resistant structure regulations. The steel cover with a flange, which prevents the spread of fire and delays its progress, stops flames from entering the wall interior through the gaps between the wall hole and the box. We also provide information on "installation methods" and "cable routing processing methods." 【Features】 ■ Ideal for quasi-fire-resistant structures ■ Steel cover with a flange that prevents the spread of fire and delays its progress ■ Prevents flames from entering the wall interior through the gaps between the wall hole and the box *For more details, please refer to the PDF document or feel free to contact us.

The "Cable Hanger Series" is a product handled by Mirai Industry Co., Ltd., ideal for supporting cables on hanging bolts, such as in double ceilings. Available in four color variations, including the "Loop Type" for easy identification of wiring routes, as well as options for "LAN use," it contributes to labor-saving in building and apartment construction. Additionally, we also introduce a variety of other cable support tools. 【Features (Cable Hanger Series)】 ■ Easy to install ■ Ideal for supporting cables on hanging bolts ■ Achieves labor-saving in building and apartment construction *For more details, please refer to the PDF document or feel free to contact us.

The "Mushi-Hai Ranger G Series" is a product handled by Mirai Kogyo Co., Ltd. that prevents the establishment of pests using repellent agents. In addition to providing stable and lasting pest repellent effects, it is odorless and safe, with no inhalation due to volatilization. We offer a lineup that includes pen-type and tape-type products depending on the application area. 【Features】 ■ Prevents the establishment of pests ■ Stable and lasting pest repellent effects ■ Odorless ■ Safe with no inhalation due to volatilization ■ Can be differentiated according to usage areas, etc. *For more details, please refer to the PDF materials or feel free to contact us.

In this catalog, we introduce a comprehensive lineup tailored to various construction locations, materials, and organisms (insects, rodents, termites). Starting with the "G Series," which is effective against unpleasant pests, we also feature the "N Series," particularly effective against rodents, and the "S Series," specifically effective against termites. 【Featured Products】 ■ Mushi High Ranger G Series - Pen type, Tape type ■ Mushi High Ranger N Series - Putty type, Foam type ■ Mushi High Ranger S Series - Sheet type, Bushing type, Non-woven fabric type *For more details, please refer to the PDF document or feel free to contact us.

The "Denkoma Knife (with Safety Cover)" is an electrician's knife used for stripping cable insulation and cutting materials such as PF pipes. The safety cover features a locking slide mechanism that allows the tip of the blade to be used safely. Its safety design allows it to fit into a case, making it safe for new electricians who may not be familiar with using electrician's knives. 【Features】 ■ Safe tip ■ Safety cover protects the sharp tip ■ Non-slip, easy-to-use rubber grip ■ Durable resin case with belt clip ■ Safety design that fits into the case *For more details, please refer to the PDF document or feel free to contact us.

The "One-Touch Bolt Cover" from Mirai Industry is a mini-type protective cover for anchor bolts that can be used in narrow spaces. It can be easily attached to the anchor bolt by simply pushing it in by hand. 【Features】 ■ Easy: Just push it in by hand and screw it in 1 or 2 turns! ■ Safe: Prevents injuries from the bolt's end face! ■ Rust Prevention: Completely encloses double nuts with flat washers, preventing rust on bolts and nuts. ■ Wide Range of Bolt Sizes: Compatible with sizes from M8 to M42 and W3/8 to W1'3/8! *For more details, please refer to the catalog available for download.

The Future Industry Special Catalog for Factory and Equipment Parts is a product catalog that collects parts and materials for equipment, machinery, and FA-related applications within factories. [Featured Products (a selection)] ■ Cable Crusher: Mobile Power Supply System ■ Mira Mesh: For fireproof sections of cable racks ■ Machine Flex: For power distribution protection around machines and panels ■ Pla Mall: Neatly organizes and protects wiring and more *For product details and other featured products, please download the catalog.

"Mushi Hai Ranger G (Spray Type)" is a pen-type repellent that can be easily applied to areas where unpleasant pests are likely to pass through or where you don't want them to settle. 【Features】 - It is used by applying it inside outlet boxes, behind walls, and within pipe conduits. - It uses alcohol-based ink that takes VOC regulations into consideration. - The application color is yellow, which serves as a guide for even application and coverage. - With a thick and large capacity, one bottle can cover over 3.6 m² of PET film. - It can be applied to various materials such as plastic, paper, rubber, and metal. - Simply putting on the cap makes storage easy. - For areas that are hard to reach with a marker, it can be applied to film, cut out, and used as a sticker. *For more details, please refer to the catalog available for download.

"Mushi Hai Ranger G (Tape Type)" is a tape-type repellent that can be easily cut and applied to areas where unpleasant pests are likely to pass through or where you don't want them to settle. 【Features】 ■ Can be used by sticking it to pool boxes, wall boxes, inside distribution boards, as well as inside ducts and behind walls. ■ Can be cut to the desired length for use. ■ Repellent effect lasts for a long time. *For more details, please refer to the catalog available for download.

These are support brackets suitable for fixing SV cables, cab tire cords, and conduit pipes. The lineup includes various types such as single saddles that can be fixed with a single screw, standard saddles, and saddles for VV-F. The materials range from iron to stainless steel. *For details, please refer to the catalog available for download.*

The poly base is a resin-made pedestal for control devices that allows for the flexible installation of lighting fixtures, switches, and other equipment, giving it a wooden board feel. 【Features】 ■ No need for drilling holes for wiring. ■ The wiring holes are compatible with flange pipes (MT-22J) and PVC pipes (VE-16), providing excellent insulation. ■ Can be fixed to poles and other structures with stainless steel bands. *For more details, please refer to the catalog available for download.

The "pull-in cover" is used when pulling in cables, etc., at the wiring exit of machines, equipment, and FA devices. 【Features】 ■ Can be installed after cable wiring. ■ Comes with a saddle for temporary holding of cables and pipes on the base. ■ The main body is made of self-extinguishing resin. *For details, please refer to the catalog available for download.

Plamore is a wiring and cable duct suitable for protecting communication lines and for use around machinery, equipment, and FA devices. 【Features】 ■ Can be used in areas where nails cannot be fixed if it comes with tape ■ The base has nail holes, making it easy to secure with nails *For more details, please refer to the catalog available for download.

The Walbox (distribution panel/distribution box) is a plastic distribution box that does not require grounding work. 【Features】 ■ Excellent impact resistance and weather resistance with a rainproof structure ■ The vertical opening has an opening on the bottom side, allowing cords to be pulled out while the hood is closed. ■ There are band pass-through holes on the back of the base, making it easy to attach bands to poles and other structures. *For more details, please refer to the catalog available for download.

DIN rail is a device mounting rail with a width of 35mm according to DIN standards. It can be used in distribution boards and distribution boxes (Murata Manufacturing: Wall Box). 【Features】 ■ Device mounting rail with a width of 35mm according to DIN standards ■ Devices can be mounted and removed easily at any position ■ Can be cut to the required length with a hacksaw *For more details, please refer to the catalog available for download.

The power band is a tie band that can be used for mounting wall boxes to poles, vertical bundling of power and communication cables, and bundling of wiring within racks. 【Features】 ■ For mounting wall boxes to poles, vertical bundling of power and communication cables, and bundling of wiring within racks. ■ Excellent weather resistance, making it suitable for outdoor use. *For more details, please refer to the catalog available for download.

Mold ducts are covers used for protecting the wiring of FA equipment bodies and ancillary equipment such as facilities and machinery. 【Features】 ■ Neatly covers exposed piping of incoming wires ■ Outdoor use with self-extinguishing properties, excellent weather resistance, and heat resistance ■ Design and color that match the diversifying exterior walls without compromising aesthetics ■ Compact and sleek design with color variations that match wall surfaces ■ Easy and clean cutting with a dedicated cutter *For more details, please refer to the catalog available for download.

Beam Rackles are mounting brackets for various equipment such as lighting devices, facilities, and machinery. Since the steel material mounting part and the device mounting part are integrated, assembly work is unnecessary. 【Examples of Use】 ■ Installation of high ceiling lighting fixtures ■ Installation of fluorescent lights, wiring devices, fire detectors, etc. ■ For the installation of stabilizers ■ For hanging brackets for racks, ducts, etc. ■ For cable support and suspension ■ For the installation of explosion-proof lighting fixtures, high ceiling lighting fixtures, amplifiers, etc. *For details, please refer to the catalog available for download.

【Features】 ■ Racks can be customized to fit the site ■ Easily accommodates sudden changes in electrical circuits or irregular site conditions ■ Beautiful wireframe that adds an aesthetic touch to the interior ■ Clean structure that minimizes dust accumulation *For details, please refer to the catalog available for download.

Future Industrial's "Card F/Card F" is a display card suitable for indicating the destination of wiring and cables. 【Features】 ■ Card case type that allows for name replacement using writing paper ■ The back of the white type can be written on directly with a pen ■ The zippered version prevents foreign matter contamination with a zipper *For more details, please refer to the catalog available for download.

The "Mirac Ladder" cable cutter (pulley for powering electric equipment cables) is easy to install. It is a simple type that allows for easy expansion and relocation, with a wide variety of models available to respond quickly to various job sites, making it suitable for use in all fields such as electrical work, machinery, shipbuilding, and lumber processing. 【Example Lineup】 ■ For messenger wire ■ For aluminum rails ■ For I-beams ■ Brackets *For more details, please refer to the catalog PDF available for download.

The "Mushi Hai Ranger N Series" is a product handled by Mirai Kogyo Co., Ltd. that reduces rodent damage using materials containing repellent components that mice dislike. Since the repellent components are blended into the material, the repellent effect lasts for a long time. Additionally, we offer a comprehensive lineup tailored to various usage locations, including "foam type" and "putty type." 【Features】 ■ Material containing repellent components that mice dislike ■ Long-lasting repellent effect ■ Comprehensive lineup tailored to various usage locations *For more details, please refer to the PDF document or feel free to contact us.

The "Miracle Ladder" is a simple cable rack for wiring and cables, designed to require less effort and time for installation compared to conventional products. It is a wire-type vertical wiring support material that is actively used in factories as an alternative to low-voltage cable racks. One of its significant advantages is the substantial reduction in construction time, and it can also be transported by one person, which reduces storage space, allowing for a significant overall reduction in the time required for installation! By using attachments such as steel brackets, intermediate support brackets, and sway prevention brackets, cables can be freely routed along steel materials or walls. 【Features】 ■ Easy-to-use wire lifting system ■ Labor-saving ■ Shortened construction period ■ Size and weight suitable for one-person transport ■ Reduced storage space *For more details, please refer to the PDF materials or feel free to contact us.

Packunflex (corrugated tube) is a nylon corrugated tube that can be installed after construction, suitable for protecting and bundling wiring and cables for equipment, machinery, and FA devices. 【Features】 ■ Nylon corrugated tube that can be easily cut with a PVC cutter or similar tool ■ Half-split type corrugated tube allows for retrofitting onto cables ■ Easy cable insertion when using installation tools ■ Excellent weather resistance, suitable for repairs in damaged areas of PF pipes * For details, please refer to the catalog available for download. * Mirai Industry offers a variety of corrugated tubes. For more information, please contact us directly.

The "Clamp Tube" is used for protecting the curved sections of bundled wires, the crossing wires to doors, inter-panel crossing wires, the extending and retracting parts of cylinders such as robots, wiring bundles with many branches, and for organizing wiring, among other applications. 【Features】 ■ Eliminates the need for wrapping, reducing work time ■ Can be removed and reused ■ Equipped with slits, allowing for flexible installation even on curved sections ■ Comes with a dedicated tool *For more details, please refer to the catalog available for download.

"Spiral tube" is used for protecting curved sections of bundled wires, crossing wires to doors, inter-panel crossing wires, the extending and retracting parts of cylinders such as robots, wiring bundles with many branches, and organizing wiring, among other applications. It comes in four colors, which is convenient for wire identification. *For more details, please refer to the catalog available for download.

The wagon mall is suitable for protecting indoor wiring on the floor for ancillary equipment such as machinery, equipment, and FA devices. 【Features】 - Flat type that allows carts and wagons to pass smoothly without the worry of tripping - A lineup of colors that match the floor - The base has nail holes for easy nailing - Comes with temporary adhesive tape that is convenient for storing multiple cables or cables with bends *For more details, please refer to the catalog available for download.

The 'Skirting Board Moulding' is a skirting board-shaped moulding that can store troublesome wiring during telework and easily accommodate wiring and cables for machinery, equipment, and FA devices, making it a versatile moulding. [Features] ● The cover part is made of soft material, allowing cables to be easily pushed in. ● It comes with vertical dividers for separate storage of wiring. ● Made of plastic, it is lightweight and easy to handle for transportation and installation. *For more details, please refer to the catalog available for download.

The "skirting duct" is a skirting-type wiring duct that can store wiring for auxiliary equipment such as machinery, facilities, and FA devices. It features a slide mechanism for easy removal and maintenance. 【Features】 ■ Made of plastic, it is lightweight, making it easy to carry and handle during installation. ■ With dividers, it allows for separate wiring of low voltage and high voltage. ■ The snap-on lid can be installed with one touch, making it easy to attach and detach, and facilitating the easy insertion and removal of cables as well as maintenance inspections. *For more details, please refer to the catalog available for download.

Machine Flex is a self-extinguishing flexible conduit that can be used for cable protection around industrial machinery and robots, as well as for electrical conduits within factories. It can be easily cut with a PVC cutter. The included accessories allow for quick connection and disconnection without the need for tools such as wrenches. 【Features】 ■ Easily cut with a PVC cutter or similar tool ■ Convenient markings for cutting (marked at 50 cm intervals) *For more details, please refer to the catalog available for download.

Plastic ducts are covers used for protecting the wiring of FA equipment bodies and ancillary equipment such as facilities and machinery. 【Features】 - Lightweight due to being made of plastic, making it easy to carry and handle during installation. - Available in three color variations: beige, wall white, and gray, allowing for color coordination to match the site. - The snap-on lid can be easily attached and detached, facilitating easy access for cable insertion and maintenance inspections. *For more details, please refer to the catalog available for download.

The flame-retardant Mirarex F is a flame-retardant type of corrugated tube. It is a flame-retardant corrugated rigid synthetic resin pipe (FEP) that complies with the JIS C3653 standard for "Construction Methods for Underground Installation of Power Cables." 【Other Corrugated Tubes from Mirai Industry】 ■ Pakunrex (Fully split type corrugated tube) ■ Miraflex SS (Corrugated tube that prevents rodent damage) ■ Mirarex F (This product) *For details, please refer to the catalog available for download. For inquiries about other corrugated tubes, please contact us directly.

"Neo Clear" is a soundproofing and insect-repelling valve that eliminates the popping sound of room air conditioners caused by the inflow of outside air through drain hoses and other openings due to pressure differences between indoors and outdoors. Connecting it to the drain hose is a simple task of just inserting it. The silicone rubber of the check valve does not open from the outside, preventing the entry of small insects, outside air, as well as blocking dust and unpleasant odors. 【Features】 ■ Easy installation, can be applied to drain pipes ■ Can be installed on vertical, angled, or rolling pipes ■ Clear body, overwhelmingly compact ■ High weather resistance ■ Can be disassembled and reassembled while attached to drain hoses, etc. *For more details, please refer to the PDF document or feel free to contact us.

Miraflex SS is a PF tube (corrugated tube) that contains a spicy ingredient that mice dislike. It reduces damage caused by mice compared to conventional PF tubes. 【Other corrugated tubes from Mirai Industry】 ■ Mirarex F / Flame-retardant type (flame-retardant corrugated tube) ■ Packunrex (fully split type corrugated tube) ■ Miraflex SS (this product) *For more details, please refer to the catalog available for download.

The "downlight base" is a product used for installing downlights onto spandrels (metal decorative panels). It allows for installation that overcomes the protrusions of the spandrel, enabling a perfect fit without gaps on the ceiling surface. Additionally, it can be used for repairing gypsum board when reusing existing downlight openings during renovations. 【Features】 ■ Labor-saving installation (can be installed with just one product) ■ Fall prevention measures ■ Reduction of installation issues ■ Improved finish and appearance ■ Comes with adhesive tape *For more details, please refer to the PDF document or feel free to contact us.