日本シンテック List of Products and Services

A versatile thermal anemometer ideal for airflow control in air conditioning and similar applications. Available in two types: integrated body and probe, and separate body and probe. Measurement ranges include three types: 0–2, 0–10, and 0–20 m/s. Options for 0–40 m/s and 0–60 m/s types are also available. Integrated probe section: φ 12×225 mm, with flange. Separate probe section: φ 12×245 mm, with flange and 5 m cable. An option for an LCD display is also available. Output: selectable from DC 4–20 mA and DC 0–10 V (one must be specified). Body and probe material: flame-resistant polycarbonate. Probe head: made of stainless steel. Power supply: DC 24 V ±10%.

• Anemometer
• others
• Air conditioning equipment

High safety and reproducibility, high-temperature and pressure-resistant wind speed converter. Available in two types: integrated body and probe, and separated body and probe. Measurement ranges are 0–2, 0–10, and 0–20 m/s. Options for 0–40 m/s and 0–60 m/s types are also available. Measurement gas temperature is 0 to +80 °C, with a usage pressure of 10 bar. Integrated probe section: φ 12×225 mm, with R 1/2 mounting fixture. Separated probe section: φ 12×245 mm, with mounting fixture and 5 m cable included. An option with an LCD display is also available. Output: selectable from DC 4–20 mA and DC 0–10 V (either can be specified). Body material: fire-resistant polycarbonate, probe: stainless steel. ☆ Power supply: DC 8–35 V, AC 12–30 V.

• Anemometer
• Air conditioning equipment
• others

We offer a variety of insulated thermocouples made from materials such as Teflon (FEP, PFA), vinyl, glass, heat-resistant inorganic paint-coated glass, silica glass, and ceramics. We can accommodate K, T, E, and J thermocouples with wire diameters of 0.1/0.2/0.32/0.65/1.0 mm, available in rolls of 100 m, as well as small quantities, custom welding at the tip, and installation of Y terminals and plugs. *The available meters and quantities may vary depending on the insulation material, wire diameter, and type of thermocouple.

• Other measuring instruments
• others

By equipping a dedicated outdoor shield, the sensor is protected from sunlight and wind and rain, enabling high-precision temperature and humidity measurements outdoors. A highly reliable platinum resistance temperature sensor is used for temperature measurement, while a fast-responding capacitive type is adopted for humidity measurement. In addition to the temperature and humidity type, a humidity-only type is also available. Outputs of DC 0–1 V/0–10 V/4–20 mA are provided, and temperature is output as Pt 100Ω 2-wire. ☆ Measurement range: -30 to +70 °C, 0 to 100 % RH ☆ Power supply: DC 6–30 V

• Other measuring instruments
• others

By installing a dedicated outdoor shield, the sensor is protected from sunlight and wind and rain, enabling temperature and dew point measurements outdoors. The temperature sensor uses a highly reliable platinum resistance thermometer, while the humidity sensor employs a fast-responding capacitive type. *Dew point temperature is calculated from temperature and humidity. The measurement range is -20 to +80 °C and 0 to 100 %RH. Dew point temperature output supports -20 to +40 °C DP or -40 to +60 °C DP (one must be specified). The output can be selected from DC 0 to 10 V or DC 4 to 20 mA. ☆Power supply: DC 8 to 35 V, AC 12 to 30 V. *Due to the temperature and humidity calculation type, the error increases below -10 °C DP.

• Other measuring instruments
• Other analytical equipment

The O M X series is a simple monitor designed to confirm changes in odor by quantifying the relative strength of odors compared to clean air. When objectively evaluating "odors," it is necessary to express the invisible "odor" in numerical terms, especially in the context of countermeasures against unpleasant smells or the design of fragrances. The O M X-S R M digitally displays the intensity of "odors" and identifies their types. By switching measurement ranges, it can handle concentrations from low to high with a single unit. 【New Features】 - Further enhanced odor sensitivity compared to the conventional O M X-S R. - In addition to the digital display of odor intensity, a calendar function has been added. - A longer-lasting built-in pump has been adopted, and pump noise has been reduced. - The dedicated software now includes an automatic graphing function and supports PC communication via USB. - New specialized models O M X-A D M/O M X-T D M have been introduced, focusing on specific odor groups. - O M X-A D M: Hydrogen sulfide / Methyl mercaptan / Ammonia - O M X-T D M: Toluene / TVOC

• Environmental Survey
• others
• Other analytical equipment

Equipped with a microcontroller, it outputs the dew point temperature calculated from temperature and relative humidity. Measurement is possible over a wide range of -25 to +100°C and 0 to 100% RH. Two types are available: the high-precision NS-RA and the standard NS-RB. The temperature sensor uses a high-precision platinum thin-film sensor element, while the humidity sensor employs a polymer capacitive humidity sensor that remains stable even in high humidity ranges and does not require circuit adjustment during replacement. The humidity sensor features water-repellent processing, sintered resin sensor caps, stainless steel sensor caps, mounting flanges, and a variety of options for traceability certification.

• Other measuring instruments
• others

This is a temperature and humidity converter with excellent durability against high temperature, high humidity environments, and condensation. A humidity-only type is also available. It can be selected based on application as direct connection type, separated type, or duct insertion type. The separated type also offers options for ultra-thin, compact space, and pressure-resistant sensors. High precision type with inspection certificate ±2% RH and general type ±3% RH are available. Thanks to compatible humidity sensor elements, no circuit adjustment is needed when replacing sensors. It comes with a variety of options including waterproof and water-repellent treatment for condensation environments, dust and mist sensor caps, LED display, output cable extension, modifications for AC adapters, and traceability certification.

• others
• Other measuring instruments

The temperature and humidity, along with various measurement values, are displayed on an LED. The display uses high-brightness red 7-segment LEDs, making it bright with a wide viewing angle and clarity. In addition to analog signals, inputs such as temperature resistance sensors, thermocouples, BCD, counters, tachometers, and RS485 are also possible. Three character heights of 57mm, 84mm, and 137mm are available. The visibility distance is approximately 20m (NSD-12 model), about 30m (NSD-15 model), and about 50m (NSD-23 model), providing excellent readability, making it ideal for monitoring and managing various values. The case is available in 4-digit, 6-digit, and 8-digit options according to the number of digits to be stored. The display unit is filter-integrated, allowing for arbitrary selection of the number of display digits, making it economical. Units such as '℃', '%RH', and 'kg', as well as titles like 'Temperature', 'Humidity', and 'Weight', can be engraved, along with any arbitrary units or titles. In addition to combined displays in 2 or 3 tiers, there is also a double-sided display type that can be viewed from both sides. Mounting brackets can be selected for either hanging or wall mounting. The power supply is AC85-264V, 50/60Hz.

• Other security systems
• Other measuring instruments

A cost-effective thermal wire anemometer probe. Available in three types with measurement ranges of 0-1 m/s, 0-10 m/s, and 0-20 m/s. It has no converter section, is compactly designed, and is easy to install. It boasts excellent long-term stability and high reproducibility. Ideal for environmental monitoring in air conditioning systems and clean rooms.

• Ventilation and smoke exhaust equipment
• Automatic Control Equipment
• Anemometer

A compact, wide-range, low-cost integrated temperature and humidity probe. It outputs linearly from DC 0 to 1V for relative humidity from 0 to 100% RH. There are types available with only humidity output and types with temperature output as well. Compatible humidity sensors allow for on-site replacement. The platinum temperature sensor is a high-precision A-class three-wire resistance thermometer. The standard probe length is 80 mm, with options for 200/250/350 mm. The standard 500 mm long cable can also be extended or detached with connectors. There are many options available, including waterproof and water-repellent processing for humidity sensors in condensation environments, sensor caps for dust and mist, and modifications for AC adapters. Inspection reports and traceability certificates can also be issued for an additional fee.

• Surveying
• Other measuring instruments
• others

Signals from a dedicated indoor temperature and humidity CO2 meter are received and displayed on a large LED display. The CO2 value is shown in high brightness at 58 mm, and the temperature and humidity values are displayed at 38 mm. It features a two-tier display with a gentle green color and a clear red color for easy visibility. Changes in facial display indicate the environmental conditions of the installation location. The main unit size is L 375 × W 200 × D 60 mm, lightweight, and easy to install. ☆Power supply: AC 100–240 V. *The power for the indoor temperature and humidity CO2 meter is supplied from this display unit.

• Other measuring instruments

A high-capacity thermocouple data logger capable of storing 500,000 data points. It can connect to eight types of thermocouples: K/J/T/E/R/S/B/N. With mini plug and terminal block connection methods, you can easily connect your existing sensors. The dedicated software allows for easy operation from a computer, including starting, stopping, and downloading data. The measurement interval can be freely set between 1 second and 24 hours. The operating environment of the main unit supports a wide temperature range from -40 to +80 °C. Transferred data is displayed in numerical and graphical formats, and conversion to Excel is also possible. The battery life is approximately 10 years with a 15-minute interval, making it suitable for long-term measurements. ☆Power: One 3.6 V lithium battery.

• Surveying
• Other measuring instruments

In addition to temperature and relative humidity, it is also possible to display the dew point temperature through calculation functions. Humidity + temperature, dew point + temperature, and dew point + humidity can be displayed on a 2-line LCD by switching. It features simultaneous display of maximum and minimum values, a hold function, and a backlight function. An auto power-off function allows for off time settings from 0 to 120 minutes. It is equipped with a highly reliable CMOS sensor element. Traceability certification can also be issued separately for a fee. Measurement range: Temperature -20 to +70 °C, Humidity 5 to 95 %RH. *Dew point temperature is calculated from temperature and humidity. *Power supply: 4 LR03 (1.5 V) batteries.

• Other measuring instruments

The thermal (heat) anemometer NS-WT series has a sensor that is constantly heated to a constant temperature, and when cooled by airflow, the temperature is maintained by a protective circuit. The overheat current at that time is proportional to the airflow velocity (wind speed). The temperature is measured by a thermistor sensor. There are two types available: the straight type NS-WT 110 and the L-type NS-WT 115. 【Features】 - Wind speed and temperature measurement - Airflow calculation - Low wind speed measurement - Average value calculation function - Backlight - Hold value, minimum and maximum value display - Automatic power off ☆ Measurement range: 0.15 to 30 m/s, 0 to 99999 m³/h, -20 to +80°C ☆ Power supply: 4 LR03 (1.5 V) batteries ☆ Weight: approximately 250 g

• Anemometer

The vane-type anemometer NS-WV 110 calculates wind speed by detecting the rotation of a shaft caused by the rotation of the blades, using a proximity switch or similar device. There are three sizes of vane sensors available: NS-WV 111: φ14 mm, NS-WV 117: φ7 mm, NS-WV 110: φ100 mm. 【Features】 - Wind speed and temperature measurement - Air volume calculation - Average value calculation function - Backlight - Hold value, minimum/maximum value display - Automatic power off ☆ Measurement range: NS-WV 111 0.8–25 m/s, NS-WV 117 0.4–35 m/s, NS-WV 110 0.3–35 m/s, temperature -20 to +80 ℃ ☆ Power supply: LR 03 (1.5 V) 4 batteries, weight: approximately 390 g

• Anemometer

This is a new type of handheld anemometer system that can connect thermal (heat) type, vane type, and vortex type sensors. It is a multi-type device that can also accept Pt 100 Ω, current, and voltage signal inputs. 【Features】 - Wide measurement range capable of measuring from 0 to 200 m/s (using thermal sensor). - Capable of measuring in environments from -40 to +500 °C (using vane sensor). - Can measure in environments containing dust and mist (using vortex sensor). - Excellent durability against corrosive gases and chemicals (using vortex sensor). - Convenient handheld design with IP65 structure. - Capable of storing 40,000 measurement data points and outputting to a computer. - Large LCD with excellent operability and touch key operation. - Two-point analog output of DC 0 to 10 V. - Memory function for average/minimum/maximum values. ☆ Power supply: 4 AA batteries or AC adapter.

• Anemometer

This is an indoor temperature and humidity converter capable of analog output for temperature, humidity, and temperature-humidity. The temperature element uses a resistance temperature detector, and the humidity element employs a polymer thin-film resistance type. The temperature output can be selected from Pt 100Ω 3-wire, DC 4-20 mA/2-wire, or 4-wire, while the humidity output can be chosen from DC 4-20 mA/2-wire, 4-wire, or DC 0-1 V/4-wire. The humidity sensor features a compatible connector system, allowing for field replacement. It has dimensions of W 90×H 90×D 32 mm and weighs approximately 90 g, making it lightweight and compact. ☆ Measurement range: 0 to +50 °C, 5 to 95 %RH (no condensation) ☆ Power supply: DC 24 V

• Automatic Control Equipment
• Other measuring instruments

A versatile thermal type temperature and wind speed converter optimal for controlling wind speed in air conditioning and similar applications. It alternately displays the measured temperature and wind speed values. Available in separate type and duct insertion type, with probe lengths of 150 mm and 300 mm to choose from. The probe has a diameter of φ13 mm, and the sensor cable is standard 2 m, with options for 5 m or 10 m. ☆ Output: Selectable between DC 4–20 mA and DC 0–10 V (specify at the time of order). ☆ Measurement range: 0–30 m/s, 0–+50 ℃. ☆ Body material: ABS resin, compliant with IP 65. ☆ Power supply: DC 24 V ±10%.

• Anemometer