エクセリ List of Products and Services

● The FC-B20R (FCB20R) is a specific low-power transceiver manufactured by F.R.C. Co., Ltd. under the FIRSTCOM brand. ● This is a set of two specific low-power transceivers, and it comes with two earphone microphones. ● It supports direct communication on 20 channels and a relay device for specific low-power transceivers, FC-R3, on 27 channels. ● The call group has 38 modes. ● It has a waterproof function equivalent to IPX4 (equivalent to the old JIS protection grade 4 for splashing water, JIS grade 4). ● It operates on three AA alkaline batteries sold separately. ● The battery life is approximately 60 hours. * This is an estimated time based on alternating transmission for 5 seconds, reception for 5 seconds, and standby for 50 seconds. * When using three AA alkaline batteries. ● Other various functions include: - VOX (hands-free) function - APO (auto power off) function - SQL (squelch) with 6-step switching - 10 types of call tones switching - Standby beep sound at the end of a call - Channel scan function - Emergency & safety light - Durable polycarbonate case - Main unit reset function * For more details, please refer to the PDF document or feel free to contact us.

• others

The AD-92SMA (AD92SMA) is an SMA to BNC conversion adapter made by ICOM. The AD-92SMA has one side with an SMA-J (female) connector and the other side with a BNC-P (male) connector. It is used to attach an antenna with a BNC-J connector to a radio with an SMA-P connector. It is securely fixed with a nut, providing peace of mind during use.

• others

The AD-55NS (AD55NS) is an AC adapter made by Icom. It is an AC adapter for the Icom communication receiver IC-R8600. By connecting the AD-55NS to the IC-R8600, power can be supplied from a household AC100V power source.

• others

●FC-R3AC (FCR3AC) is an AC adapter manufactured by F.R.C Co., Ltd. ●It is the standard AC adapter for the main unit of the FC-R3 relay device for specific low-power transceivers. It can be purchased as a spare or replacement. ●It can also be used with the wireless relay FC-R2. ●FC-R3 and FC-R2 operate on household power supply AC100V.

• others

The A1430S8 (A1430-S8) is a dual-band 8-element beam antenna for the 144/430MHz band manufactured by Daiwa (Diamond). It is a compact dual-band beam antenna for 144/430MHz that can be used for both mobile and fixed applications. It supports the 144/430MHz band with a single feed point. It is small and lightweight, weighing only 1.2kg. No tools are required for mast installation. *For more details, please feel free to contact us.*

• others

The DM-340MV (DM340MV) is a stabilized power supply for radio equipment manufactured by Alinco, with a maximum output of 35A. It is a highly versatile stabilized power supply for radios, featuring twin meters and equipped with a temperature-controlled fan. It is suitable for use in vehicles with a cigarette plug and two snap terminals, making it ideal for use at companies or homes. The radio equipment is rated for an output of up to 100W, while the power booster can handle up to 200W. It converts AC 100V to DC 12V.

• others

● The DK-LR11 (DKLR11) is a wireless call device equipped with a LoRa temperature and humidity sensor made by Alinco (ALINCO). ● It features a heatstroke warning function. ● Communication is done via LoRa. * LoRa is one of the LPWA (Low Power, Wide Area) communications defined by ARIB-STD-T108, utilizing a communication method in the Sub-GHz band, which is below 1GHz. ● The child unit notifies the parent unit of the environmental conditions (heat index = WBGT) around it, and the parent unit alerts with a voice guide. ● Multiple DK-LR11 units can be set up with one parent unit and up to 10 child units. * For detailed settings of the parent and child units, a connection cable (external contact cable) EDS-47 for the free setting software (sold separately) is required. * For more details, please refer to the PDF materials or feel free to contact us.

• others

The DJ-P422W (DJP422W) is a specific low-power transceiver manufactured by Alinco that supports app radio/intermittent and relay communication. There are two types: the middle antenna DJ-P422WM and the long antenna DJ-P422WL. It is compatible with the app radio Air-InCom.Lite and also supports intermittent and relay communication between specific low-power transceivers. The app radio Air-InCom.Lite can be contracted even by a single person. There are 500 channels available for "open channel" communication similar to group calls with specific low-power transceivers. Additionally, if you contract the optional "secret channel," you can communicate on a channel exclusive to your group. When you purchase the DJ-P422W, you can use a coupon code to try Air-InCom.Lite for one account free for a limited time (a smartphone is required separately, and data communication fees will be incurred by your mobile carrier). In addition to a rechargeable Ni-MH battery, it can also operate with a single easily obtainable AA battery. *For more details, please feel free to contact us.

• others

● EDS-49 (EDS49) is a coaxial cable manufactured by Alinco. ● It is for the power management and monitoring system XE1151SE. ● It connects to the separately sold antenna EA-314. ● The cable length is 50 cm. ● The connector on the antenna side is SMA-J, and on the XE1151SE main unit side, it is SMA-P.

• others

●EA-314 (EA314) is an antenna manufactured by Alinco. ●It is an antenna for the power management and monitoring system XE1151SE. ●It connects to the XE1151SE via the separately sold coaxial cable EDS-49. ●The antenna length is 16 cm. *For more details, please feel free to contact us.*

• others

●CH20L20 (CH20-L20) is a desktop charger manufactured by Hytera. ●It is a charging dock for the rugged business smart device PNC460 from Hytera. *Note: It is not for explosive environments, so it cannot be used with the UL explosive-proof PNC460U. ●It has two charging pockets, allowing for the charging of two devices. ●It is used in combination with the power adapter PS2022 and the USB Type-C cable PC143. ●It can be charged from a household power supply of AC100V. ●It supports charging for lithium-ion and lithium-polymer batteries. ●The output is 5V/2A, 9V/2A, and 12V/1.5A. ●It complies with the European environmental regulation RoHS directive. ●The charging time is approximately 135 minutes. *For more details, please feel free to contact us.

• others

●NCN030 (NCN-030) is a nylon carrying case made by Hytera. ●It is a carrying case for the rugged business smart device PNC460. *Please note that it is not for explosion-proof use and cannot be used with the UL explosion-proof PNC460U. ●It is made of water-repellent and abrasion-resistant nylon material. ●It comes with a buckle that is secured with magnets, making it easy to remove. *For more details, please feel free to contact our company.

• others

●S8102485 is a power supply SAD-29A manufactured by YAESU (Yaesu Musen/Standard Horizon). ●It is a dedicated AC adapter for the single charger SAD-5329A. ●Please use it in combination with the CT code USB/C-USB/A-1M (code for the dedicated AC adapter for SAD-5329A) T9102478. ●It can be purchased as a replacement or spare. *For more details, please feel free to contact us.*

• others

The AC-557 (AC557) is an AC adapter for the battery charger made by CIRCLE ONE. It is used to charge the multilingual translation IP radio handheld Cosmotalk C580-MTR. Please use it in combination with the separately sold rapid charger RC-557. It charges using a household power supply of AC100V. This is the same product as the standard components of the C580-MTR main unit, and it can be purchased as a replacement or spare. *For more details, please feel free to contact us.

• others

●T9102478 is a CT code USB/C-USB/A-1M made by YAESU (Yaesu Musen/Standard Horizon). ●It is a code for the AC adapter of the single charger SAD-5329A. ●It is used in combination with the dedicated AC adapter S81202485 for SAD-5329A. ●You can purchase it as a replacement or spare. *For more details, please feel free to contact us.

• others

●PC143 (PC-143) is a USB Type-C power cable manufactured by Hytera. ●It is a charging and data transfer cable for the rugged business smart device PNC460 and the UL explosion-proof PNC460U. ●When combined with the PNC460 / PNC460U power adapter PS2022, it charges the PNC460 / PNC460U from an AC100V power source. ●It can also be used as a data transfer cable. ●The cable length is approximately 1 meter. ●It is a standard accessory for the PNC460 / PNC460U body. *For more details, please feel free to contact us.

• others

●PS2022 (PS-2022) is a power adapter manufactured by Hytera. ●It is a power adapter for the rugged business smart device PNC460 and the UL explosion-proof PNC460U. ●It charges the PNC460 / PNC460U in combination with the included USB Type-C power cable PC143. ●It can be used with a household power supply of AC100V. ●It complies with the European environmental regulation RoHS directive. ●It is a standard accessory for the PNC460 / PNC460U. *For more details, please feel free to contact us.*

• others

● The BP-550 (BP550) is a lithium polymer battery manufactured by CIRCLE ONE. ● It is a lithium polymer rechargeable battery for the multilingual translation IP radio handheld Cosmotalk C580-MTR. ● The battery capacity is 3,000mAh. ● It can operate the C580-MTR for approximately 30 hours or more. * This is an estimated time based on usage with GPS off and a transmission: reception: standby ratio of 1:1:18; actual time may vary depending on reception sensitivity. ● It is the same product as the standard configuration of the C580-MTR main unit. * For more details, please feel free to contact us.

• others

●BL4501 (BL-4501) is a lithium polymer battery pack manufactured by Hytera. ●It is a rechargeable battery for the rugged business smart device PNC460. *Please note that it is not for explosion-proof use and cannot be used with the UL explosion-proof PNC460U. ●With a large capacity of 4,500mAh at 3.85V, it enables approximately 24 hours of long operation. *This is an estimated time based on a usage ratio of 5 for transmission, 5 for reception, and 90 for standby. ●It is a standard component of the PNC460 main unit. *For more details, please feel free to contact us.

• others

The BL4501-Ex (BL4501Ex) is a UL explosion-proof lithium-ion battery pack manufactured by Hytera. It is a rechargeable battery for the robust commercial smart device PNC460U, which is UL explosion-proof, and is not intended for the non-explosion-proof PNC460. With a large capacity of 4,580mAh at 3.7V, it enables approximately 24 hours of long operation. This is based on an estimated usage time with a ratio of 5 for transmission, 5 for reception, and 90 for standby. It is the same product as the standard configuration item for the PNC460U. For more details, please feel free to contact us.

• others

The FC-G20R (FCG20R) is a waterproof, wireless relay-compatible specific low-power transceiver manufactured by F.R.C. No license or qualifications are required, and it can be used from the day of purchase. It is compatible with wireless relay devices, so if the communication distance is insufficient, you can use the separately sold wireless relay devices FC-R3 or FC-R1 to approximately double the range (theoretical value). It can communicate with specific low-power transceivers from other manufacturers. *For group calls *The arrangement of channels may differ. It has perfect waterproof and dustproof functionality equivalent to IP67. Calling and communication can be done in both group and all-call modes (38 groups). Additionally, it has the following features: - VOX (hands-free) function - PTT hold function - APO (auto power off) function - Squelch function - Flashlight function - Bell call function - Roger tone function - Secret communication function - Channel scan function - Key lock function - Key tone ON/OFF function - Transmission start sound setting - Transmission permission/prohibition setting *For more details, please refer to the PDF document or feel free to contact us.

• others

The FC-G20BT (FCG20BT) is a nickel-hydrogen battery manufactured by F.R.C. It is a rechargeable battery for the specific low-power transceiver FC-G20R and the transmitter FC-GT13 / receiver FC-GR13 of the C-band wireless guide system. The battery capacity is 2600mAh. It can be charged in approximately 7.5 hours using the separately sold charger & AC adapter set FC-G20BC for FC-G20R, the single charger FBC-3R + charging AC adapter AC-3 for FC-GT13 / FC-GT13, or the 20-slot charger (with AC adapter) FBC-20RG.

• others

The FC-G20BC (FCG20BC) is a charger and AC adapter set made by F.R.C for the FC-G20R. It charges the nickel-metal hydride battery FC-G20BT loaded in the specific low-power transceiver FC-G20R. The charging time is approximately 7.5 hours. It comes with a dedicated AC adapter. It can be charged from a household power supply of AC100V. *For more details, please feel free to contact us.*

• others

The FC-G20BL (FCG20BL) is a belt clip made by F.R.C for the FC-G20R. It is the standard belt clip included with the specific low-power transceiver FC-G20R. You can purchase it as a replacement or spare. By attaching the FC-G20BL, you can secure the FC-G20R to a belt or similar item. *For more details, please feel free to contact us.*

• others

●EME-SW025 (EMESW025) is a referral product of the bone conduction headset "400-BTSH025" from Sanwa Supply Co., Ltd. ●It can be used with wireless devices equipped with Bluetooth functionality from Alinco. *In addition to wireless devices, Bluetooth-compatible smartphones, mobile phones, computers, and tablets can also be used. If your computer does not support Bluetooth, please purchase a Bluetooth USB adapter. ●The EME-SW025 cannot transmit on its own, so please be sure to use it in combination with one of the PTT switches listed below. That is, models that cannot connect to the PTT switches below can receive even if they are Bluetooth compatible, but they cannot transmit. - PTT Switch Cover EDS-44 - Commercially available Bluetooth Transmit Button (Stick) EDS-45 - Commercially available Bluetooth Transmit Button (Finger Roll) EDS-46 ●The microphone is omnidirectional, picking up sound from all directions, 360 degrees. *For more details, please contact us.

• others

● WTUE7 (WTUE-7) is a television terminal with a built-in time information transmitter manufactured by Nippon Antenna. ● It is a device that uses terrestrial digital broadcast television signals to correct the time of radio clocks. ● To obtain time information from terrestrial digital broadcast television signals, it can be installed and used with the same type of wiring as a regular indoor television. ● It can automatically correct radio clocks even in places where standard radio waves do not reach, such as inside apartments, buildings, large structures, or underground. *For more details, please feel free to contact our company.*

• others

● FA-S31U (FAS31U) is a genuine short antenna made by ICOM. ● It is compatible with the specific low-power transceivers IC-4880 and IC-5880 that support simultaneous communication. ● Even when the antenna is attached, it can be used without compromising the waterproof performance of the radio unit. ● Due to its short type, it is less likely to snag during transport or when attached, making it suitable for business use. * For more details, please feel free to contact us.

• others

The AH-24 (AH24) is a 2.4GHz collinear antenna manufactured by ICOM. It is a horizontally omnidirectional type, allowing for equal transmission and reception of radio waves in all 360 degrees, thereby establishing a stable wireless communication environment. Collinear antennas have a structure that makes it easy to achieve high gain, making them suitable for improving communication quality over short to medium distances. Designed as a collinear antenna compatible with the 2.4GHz band, it emphasizes the stability of wireless communication. The gain is approximately 4dBi (typ.), enabling efficient communication with reduced signal loss. It achieves an SWR of 1.5 or less, providing excellent stability for transmission and reception. The operating temperature range is wide, from -25°C to +55°C, making it suitable for outdoor installation. The antenna part has dust and water resistance equivalent to IP67, ensuring reliability even in rainy or outdoor environments. It uses an SMA-R connector. *When connecting coaxial cables outdoors, it is recommended to use self-fusing tape for waterproofing. It is recommended for short-distance communication and outdoor installation applications. It can be used with ICOM amateur radios such as the IC-905. *For more details, please feel free to contact us.

• others

The AH-100 (AH100) is a collinear antenna for the 10GHz band manufactured by Icom (ICOM). The antenna is a horizontal plane omnidirectional antenna that can transmit and receive radio waves equally in all directions (as viewed from above). A collinear antenna is a high-gain antenna used for radio communication, commonly employed in the HF (high frequency) to UHF (ultra high frequency) ranges. This 10GHz band collinear antenna is designed to achieve stable radio communication, supporting a frequency range of 10.0GHz to 10.5GHz. The gain is approximately 5dBi (typ.), allowing for efficient communication with minimal signal loss. The standing wave ratio is 1.5 or less, providing stable transmission and reception performance. The operating temperature range is -25°C to +55°C, and the antenna part has a strong dust and waterproof performance rated at IP67, making it suitable for outdoor use even in rainy conditions. The connector used is SMA-R type, and waterproof treatment with self-fusing tape is recommended when connecting coaxial cables. This antenna is recommended for short-range communication and outdoor installation. For more details, please feel free to contact us.

• others

The D-060S (D060S) is a 60MHz band special distribution ratio power divider manufactured by Nippon Antenna. It distributes high-frequency signals from devices such as radios to each terminal according to a specified distribution ratio. However, if isolation is not achieved with the transmission and reception divider, please use it only for antenna coupling. The supported frequency is a specified frequency within the range of 50 to 70MHz. Please specify the center frequency fo (in MHz) when placing your order. The model number for pole mounting is D-060S, and for wall mounting, it is D-060SR. It is waterproof, allowing for outdoor installation. *For more details, please feel free to contact us.

• others

The D-400S (D400S) is a 400MHz band special distribution ratio power divider manufactured by Nippon Antenna. It distributes high-frequency signals from devices such as radios to each terminal according to a specified distribution ratio. However, if the isolation is not achieved with the transmitter/receiver divider, please use it only for antenna coupling. The supported frequency is a specified frequency within the range of 350 to 470MHz. Please specify fo (center frequency) MHz when placing your order. The model number for pole mounting is D-400S, and for wall mounting, it is D-400SR. *For more details, please feel free to contact us.

• others

●EA-226 (EA226) is a magnet mount antenna made by Alinco. ●It is a mobile (vehicle-mounted) magnet mount antenna for 351MHz digital simple radio registered stations. ●It comes with a connector MP attached to a 5m 3D2V coaxial cable, allowing it to connect to radios with a connector MJ. When using with a handheld device, the optional MJ-SMA conversion cable 1D05SR is required. ●It has a lightweight and compact size of approximately 22cm in length. ●The base is magnet-based, allowing it to be mounted on car roofs and similar surfaces. ●It complies with RoHS directives. *For more details, please feel free to contact us.*

• others

●VD-554 (VD554) is a 4-way splitter for receiving signals, manufactured by Nippon Antenna, with a frequency range of 40 to 270 MHz. ●It is a 4-way splitter for radio equipment. ●Operating frequency is 40 to 270 MHz. ●The model number changes based on the type of connector. - NJ connector: VD-554 N-J - MJ connector: VD-554 M type *The BNC-J connector type has been discontinued. *For more details, please feel free to contact us.

• others

● UD-554 (UD554) is a receiving 4-way splitter manufactured by Nippon Antenna, operating in the frequency range of 350 to 470 MHz. ● It is a receiving 4-way splitter for radio equipment. ● The operating frequency is 350 to 470 MHz. ● The model number changes depending on the type of connector. - NJ connector: UD-554 N-J * The BNC-J connector type UD-554 BNC is no longer in production. * For more details, please feel free to contact our company.

• others

● HKD4PSD (HKD-4-PSD) is a movable body 4-way splitter (power supply type for all output terminals) manufactured by Nippon Antenna. ● It is a splitter for the TV terminal WTUE7 with a built-in time information transmitter. ● By connecting the dedicated AC adapter HKDAD, power can be supplied to all output terminals. ● Each output terminal can output a maximum of DC15V/0.8A. *For more details, please feel free to contact our company.*

• others

● ESC-66 (ESC66) is a soft case made by Alinco. ● It is a protective case that can be used with specific low-power transceivers from Alinco, such as DJ-P422B-TM / DJ-P422B-TL and DJ-P421LA / DJ-P421MA in the DJ-P421 series. ● It protects the main body of the radio from impacts from drops, scratches, dirt, and water. ● You can use the ESC-66 while the belt clip is attached to the main body of the radio. ● If you want to use a strap while the ESC-66 is attached, please use the strap hole on the belt clip (the strap hole on the main body of the radio will be covered when the ESC-66 is attached). *For more details, please feel free to contact us.

• others

The HKD6PSD (HKD-6-PSD) is a movable 6-way splitter manufactured by Nippon Antenna, designed for all output terminals to transmit power. It distributes the time information transmitter built into the television terminal WTUE7 into six outputs. By connecting the dedicated AC adapter HKDAD, it is possible to supply AC 100V power to all output terminals. Each output terminal provides a maximum output of DC 15V/0.8A. *For more details, please feel free to contact us.

• others

● The HKDAD is an AC adapter made by Nippon Antenna. ● It is a dedicated AC adapter for the TOT repeater TOTLFR used with radio-controlled clocks and the 4-way splitter HKD4PSD and 6-way splitter HKD6PSD for the television terminal WTUE7, which has a built-in time information transmitter. ● It is powered by a household power supply of AC 100V. ● The maximum output is DC 15V/0.8A. *For more details, please feel free to contact our company.*

• others

The IP-36N-ST101C(W)-A (IP36NST101C(W)A) is a SIP phone (console) manufactured by Nakayo Co., Ltd. (NAKAYO). In addition to standard telephone functions, it can be used as a transmitter and receiver for the Clear Talk Cam made by TB-eye. The Clear Talk Cam is a digital wireless intercom that uses 2.4GHz/5GHz wireless LAN, allowing for up to 120 simultaneous calls with high sound quality. It features expandability with nurse call systems and others. Like the transceiver subunit, it can also perform group calls, and by using the separately sold function expansion dongle TBE-USB-CPLUS2, it is possible to make simultaneous calls across groups and individual calls with transceivers. Power can be supplied via PoE.

• others

● The MV-P370 (MVP370) is a unidirectional microphone manufactured by JVC Kenwood. ● It is an ideal tabletop stand microphone for indoor announcements and business broadcasts. ● Being a unidirectional microphone, it is effective in reducing surrounding noise and feedback. * A directional microphone is one that picks up sound from a specific direction only. ● It is equipped with a talk button that locks when turned to the right while pressed. In the locked state, hands-free broadcasting is possible. ● There is a semi-fixed volume control on the bottom for adjusting chime volume and microphone volume. ● It is powered by a household AC power supply of AC100V using the included AC adapter. ● The connector is a φ6.3 single-ended phono plug. * For more details, please feel free to contact us.

• others

The MV-P370M (MVP370M) is a unidirectional microphone made by JVC Kenwood. It comes with an ascending/descending 4-tone chime. It is a tabletop stand-type microphone. Being a unidirectional microphone, it is effective at reducing surrounding noise and feedback. (Note: A directional microphone picks up sound only from a specific direction.) It features a talk button that locks when turned to the right while pressed. There is a semi-fixed volume control for chime volume and microphone volume located on the bottom. It is suitable for hands-free broadcasting, making it ideal for in-house announcements, business broadcasts, paging, guidance, and conference use. It is powered by a household AC power supply of AC100V using the included AC adapter. The connector is a φ6.3 mono phone plug. *For more details, please feel free to contact us.*

• others

The DP-0602B 55-66 City (DP0602B 55-66 City) is a dipole antenna for outdoor reception stations in the 60MHz band, manufactured by Nippon Antenna. * A dipole antenna is an antenna that is half the wavelength (1/2λ) in length. It is designed to transmit and receive radio waves in all horizontal directions when installed vertically. * This is an outdoor dipole-type antenna for municipal disaster prevention administrative radio communications at 60MHz. * It can be used as a vertically polarized omnidirectional fixed station. * It is for a specified frequency within the range of 54-75MHz. Please specify the center frequency (fo) in MHz when placing your order. * The connector is NJ. * The compatible antenna mounting brackets are C-30 and C-19(D). * For more details, please feel free to contact us.

• others

The BSA-83KIT (BSA83KIT) is a portable and easy-to-install simple antenna pole kit provided by Nippon Antenna. It has a total length of approximately 5.5 meters, making it suitable for various field operations such as temporary antenna setups and the construction of temporary base stations outdoors. Due to its lightweight and user-friendly design, it is ideal for situations that require quick installation, such as event venues, construction sites, and temporary communication facilities during disasters. *For more details, please feel free to contact us.*

• others

● AP-10 (AP10) is a 9m antenna pole manufactured by Nippon Antenna. ● It is an antenna pole for mounting antennas such as radios. ● The length when extended is 9m. ● Please use it in combination with the separately sold four-legged base holder (horse) BS-78 and wire rope (120M) SUS. ● When constructing the AP antenna pole, if the installation of the base holder BS-78 is unstable on the roof or similar locations, use the base pipe steering AS-63 and pre-tension the stay wire on the base pipe to secure it, allowing for safe extension work of the pole. *For more details, please feel free to contact us.

• others

The AP-12 (AP12) is an antenna pole (10.9m) manufactured by Nippon Antenna. It is an antenna pole for mounting antennas such as radio equipment. The length when extended is 11m, and it is a 6-section pole. Please use it in combination with the separately sold four-legged base holder (horse) BS-7 and wire rope (120M) SUS. *For more details, please feel free to contact our company.

• others