エクセリ List of Products and Services

The DJ-X82 (DJX82) is a communication receiver with a keypad manufactured by Alinco. It is an easy-to-use receiver for beginners, equipped with a keypad. The charging and external power terminal is USB TYPE-C, allowing for USB charging. It features "Quick Memory" and "Quick Search Pass" banks with 200 channels each. With simple operations using the dial, you can skip noise while searching and temporarily store found signals, making it easy to move them to the conventional bank. It also includes a selectable sound & silent simple bug detection mode. A free editing software that allows memory registration and set mode configuration (available for download from the Alinco website) can be connected to a PC using the included USB cable for settings. It can receive AM/FM and FM broadcasts from 76-108 MHz through a separate circuit. You can register the conditions for program scanning by pairs, allowing you to search the same band with different steps and modes. *For more details, please refer to the PDF document or feel free to contact us.

• others

●ESC-68 (ESC68) is a soft case made by Alinco. ●It is a soft case specifically designed for the communication receiver (receiver) DJ-X82 with a keypad. ●It protects the receiver from scratches and dirt. *For more details, please feel free to contact our company.*

• others

● RSB-BA5-MJ (RSBBA5MJ) is a roof side base made by Nippon Antenna. ● It is a base used for installing antenna equipment for mobile radios on the roof side of a vehicle. ● Please use it in combination with separately sold antenna elements (with M-P connectors) such as HGB-150-2-09EL and GB-060L-2-09EL. ● It comes with the following connectors: - Antenna connection side connector: M-J connector - Radio connection side: It has an attachment connector, and you can choose between M-P or N-P connectors depending on the radio used. ● A 5m coaxial cable (5D-2V) is included. ● The installation method is gutter mounting. *For more details, please feel free to contact us.

• others

● K515 (K-515) is a roof rail dedicated base (mid-size base) manufactured by Daiwa (Diamond) with a variable mounting width. ● It is an antenna base used for mounting the antenna of a vehicle-mounted radio on the car's roof rail. It can be installed on various car roof rails. ● Please use it in combination with separately sold antenna elements. ● Compatible pipe diameter is Φ8 to Φ32mm. ● It is compatible with rails that are 50mm or less in height and 48mm or less in width. ● It complies with the European environmental regulation RoHS directive. *For more details, please feel free to contact us.*

• others

●EDC-197A (EDC197A) is a standard charger set manufactured by Alinco. ●It charges Alinco receivers DJ-X82 and DJ-X81. ●It is a standard configuration item for the DJ-X81 main unit. ●The AC adapter EDC-139 is included. ●It charges from a household power supply of AC100V. ●The charging time is approximately 10 hours to fully charge the dedicated nickel-metal hydride battery EBP-179. *For more details, please feel free to contact our company.

• others

The B152100 (B-152100) is a mixer cable made by ON'S COMPANY. It can be used with the wireless guide system Bb Guide. By connecting three receivers (RX) and one transmitter (TX) of the Bb Guide with the B152100, the Bb Guide can transmit simultaneously to up to three people.

• others

The B152101 (B-152101) is an external output cable (male) manufactured by ON'S COMPANY. It can be used to connect the wireless guide system Bb Guide to external speakers.

• others

The B152102 (B-152102) is an external output cable (female) manufactured by ON'S COMPANY. It can be used to connect the wireless guide system Bb Guide to external speakers.

• others

●B199046 (B-199046) is a USB charging cable made by ON'S COMPANY. ●It is the cable used to charge the Bluetooth intercom BbTALKIN. ●It is a standard component of BbTALKIN CS, BbTALKIN CS2, and BbTALKIN ADVANCE. It can be purchased as a replacement or spare.

• others

The VP-1D-004 (VP-1D-004) is a 3-meter extension cable for the Logitaco main harness manufactured by SysTech Co., Ltd. It is used with the Logitaco DTU-1 (the model number when ordering from Mobile Create Co., Ltd. is VP-1D-001).

• others

●OPC-2401 (OPC-2401#11) is a headset adapter cable made by ICOM. ●It is an adapter used to connect a headset to the VHF airband transceivers IC-A16 and IC-A16E. ●It features an LWP connector.

• others

The VB400-EXT-CHARGE (VB400EXTCHARGE) is a charging cable for the VB400 made by Motorola. It allows for simultaneous charging and configuration of the Motorola Body Camera (BWC) VB400, as well as transferring video to the VB400 management software VideoManager. It serves as a lightweight alternative to the VB400 single-port dock. The power side connector is USB Type-A, and the cable length is 2 meters.

• others

The FC-ZXPROLC (FCZXPROLC) is a connection charging cable manufactured by F.R.C. Co., Ltd. By combining it with the separately sold AC adapter FC-AC01, you can simultaneously charge up to four specific low-power transceivers made by F.R.C., including NX-20X, NX-20R, NT-202M, FC-ZXPRO, and FC-B203. It is a 4-way micro USB charging cable. The cable length is approximately 1.2 meters.

• others

● The NX-20BC (NX20BC) is a charger manufactured by F.R.C Corporation. ● It can charge the specific low-power transceivers NX-20X and NX-20R made by F.R.C. ● It comes with two terminals for connecting to the transceiver body. ● It can charge two units simultaneously. ● It can be charged from a household power supply of AC100V. ● The charging time is approximately 3.5 hours. *For more details, please feel free to contact our company.*

• others

The NX-20BT (NX20BT) is a lithium-ion rechargeable battery manufactured by F.R.C Co., Ltd. It is the rechargeable battery for the specific low-power transceivers NX-20X / NX-20R / FC-S22 and the disaster prevention radio NX-W109RD. The battery capacity is 1000mAh. It is charged using the charger NX-20BC while installed in the transceiver, or with the connecting AC adapter FC-ZXPROLC and the connecting AC adapter FC-AC01. The battery life is approximately 24 hours when used with the NX-20X. This is an estimated time based on using the fully charged battery with a low-frequency output rating of 400mW, transmitting for 10 seconds, receiving for 10 seconds, and waiting for 80 seconds in a repeating cycle. The charging time is approximately 3.5 hours. For more details, please feel free to contact us.

• others

The NX-20R (NX20R) is a specific low-power transceiver manufactured by F.R.C. It is part of the NEXTEC brand. It comes as an all-in-one package that includes a charger and battery, allowing immediate use upon purchase. By using the separately sold radio repeater FC-R3, you can double the communication range (theoretical value). It has 38 channels, allowing for use in 38 group modes. The VOX (hands-free) function is available. It features a dual watch function that allows standby on two channels. If communication occurs on either channel, you can talk on that channel. After the conversation ends, it returns to dual watch mode. It is a legitimate product that conforms to the technical standards of the Ministry of Internal Affairs and Communications. It supports full channels for normal communication (20 channels) and repeater communication (27 channels). It can communicate with other manufacturers' specific low-power transceivers, including 9ch, 11ch, and 20ch models. It can receive FM radio (76.0 to 90.0 MHz).

• others

The SX20C (SX-20C) is a cross-needle SWR power meter (cross-type power meter) manufactured by Daiwa (Diamond Antenna). It is a measuring instrument for radio equipment. The cross-type power meter is designed with two sets of meters to measure forward power, reflected power, and SWR at the intersection of both. The frequency range is 3.5 to 30 MHz, 50 to 54 MHz, and 130 to 150 MHz. The connector is MJ. *For more details, please feel free to contact our company.*

• others

The SX40C (SX-40C) is a cross-needle SWR power meter (cross-type power meter) manufactured by Daiwa (Diamond Antenna). It is a measuring instrument for radio equipment. The cross-type power meter is designed with two sets of meters to measure forward power, reflected power, and to read SWR at the intersection of both. The frequency range is 144 to 470 MHz. The connector is MJ. *For more details, please feel free to contact our company.*

• others

The SX240C (SX-240C) is a cross-needle SWR power meter (cross-type power meter) manufactured by Daiwa (Diamond Antenna). It has two built-in sensors for the frequency ranges of 1.8 to 54 MHz and 140 to 470 MHz. It is a measuring instrument for radios. This cross-type power meter is designed with two sets of meters to read forward power, reflected power, and SWR at the intersection of both. With the use of two sensors, it can measure a wide range from HF to UHF bands. It features illumination for better visibility. The connector is MJ. *For more details, please feel free to contact our company.

• others

● The AP-76M (AP76M) is a wireless access point manufactured by Icom. ● It is a lightweight wireless access point that complies with Wi-Fi 6 and achieves high-speed communication of 1.2Gbps. ● It has obtained technical compliance certification. ● Compliant with Wi-Fi 6 (IEEE802.11ax), it enables ultra-fast and stable data communication with a theoretical communication speed of 1.2Gbps. ● It supports the robust security standard WPA3 Personal. *Note: This is the conventional WPA2 standard. ● Beamforming/OFDMA features Equipped with beamforming technology that directs radio waves towards the direction of the device, ensuring stable communication. It also has OFDMA functionality, allowing simultaneous transmission to multiple devices rather than just one. This enables comfortable communication even with many devices connected at the same time. *For more details, please refer to the PDF document or feel free to contact us.

• others

The SX27P (SX-27P) is a compact SWR and power meter manufactured by Daiwa (Diamond Antenna) for the 144/430MHz band. It is a measuring instrument for radios. It can read power and SWR. The frequency range is 140 to 150MHz / 430 to 450MHz. The connector is MJ. It is small and lightweight, making it convenient to carry. *For more details, please feel free to contact our company.*

• others

The WL-AC1000 (WLAC1000) is a photocatalytic sterilization and deodorization device called fresair, manufactured by JVC Kenwood. It features the patented ALMION filter technology, which rapidly decomposes odors. *This is a patented technology of APS Japan Co., Ltd. *The ALMION filter has a self-cleaning effect, making maintenance easy and cost-effective. *The ALMION filter uses photocatalytic action to convert invisible viruses, bacteria, and odors in the air into water and carbon dioxide. It can cover an area of up to 25 tatami mats, circulating the air in about 60 minutes for 25 tatami mats and about 19 minutes for 8 tatami mats. It is a high-performance model specialized for sterilization and deodorization. With a compact size of 8 cm in depth, it can be installed anywhere. The included remote control makes it easy to operate from a distance. It operates on a household power supply of AC 100V. *For more details, please feel free to contact us.

• others

●AN0435H25 (AN-0435H-25) is an antenna manufactured by Hytera. ●It is an antenna for the HP708 portable radio used for onboard communication, compliant with the US explosion-proof standard UL 913 and the Canadian explosion-proof standard CSA 22.2. ●It is a standard component of the HP708 main unit and can be purchased as a spare or replacement. ●The antenna length is 9 cm. ●The antenna connector is SMA-J. ●It is compatible with GPS/Glonass. ●It supports frequencies of 400–470 MHz / 1575 MHz. ●It complies with the European environmental regulation RoHS. *For more details, please feel free to contact us.*

• others

●B-RFXM (BRFXM) is the VoiSniper voice sniper RFXM made by Bear (B-EAR). ●It is designed to be used with Bear's simultaneous communication type specific low-power transceivers: BRIDGECOM X5 (BM-X5), BRIDGECOM X10 (BM-X10), BRIDGECOM X10 Compact (BM-X10CP), and BRIDGECOM X10 Athlete (BM-X10AT). ●It is a dual-head plug voice sniper that can be used for both left and right. ●The ear hook is designed to be easy to wear and difficult to fall off. ●It is sweat-resistant, so you can use it with confidence even if you sweat. ●The microphone located near the mouth is an omnidirectional microphone, which picks up sound from any angle. ●It comes with a windscreen sponge to reduce wind noise. ●It includes a clip to secure the cord at the chest. ●By attaching the included ear silicone mold BM-ESM or the ear silicone mold light BM-ESL to canal-type earphones, it can be fixed in the ear groove. This makes it less likely to cause ear pain during long-term use and prevents it from falling out during use. ●It is ideal for situations where you want to use a radio hands-free, such as in construction or work sites.

• others

●LCY026 (LCY-026) is a carrying case made by Hytera. ●It is a protective case for the HP708 portable radio used for onboard communication, compliant with the US explosion-proof standard UL 913 and the Canadian explosion-proof standard CSA 22.2. ●It is explosion-proof. ●It protects the HP708 from dirt and impact. ●It is made of high-quality black leather. ●It is compatible with radios that have a display. ●It can be worn while using an earpiece. *For more details, please feel free to contact us.*

• others

● The BP-245H (BP245H) is a lithium-ion battery pack manufactured by Icom. ● The manufacturer part number is BP-245H#13. ● It is a rechargeable battery for the Icom international VHF transceivers IC-M72J and IC-M73J. ● It can be easily attached with a sliding mechanism. ● When attached to the transceiver, it demonstrates IPX8 waterproof performance, allowing it to be used without issues at sea. ● The charging time is approximately 2.5 hours when using the desktop charger BC-210. *For more details, please feel free to contact us.*

• others

●MCL32 (MCL-32) is a six-slot charger manufactured by Hytera. ●It is a six-slot charger for the HP708 portable radio, which complies with the US explosion-proof standard UL 913 and the Canadian explosion-proof standard CSA 22.2. ●It can charge up to six batteries simultaneously, whether they are attached to the radio (such as the explosion-proof lithium-ion battery BL2801-Ex) or standalone. ●It can charge lithium-ion and lithium-polymer batteries. ●It comes with a dedicated AC adapter. ●It can be installed on a wall or desktop. A separately sold bracket (BRK20) is required for wall mounting. *For more details, please feel free to contact us.*

• others

●BL2801-Ex (BL2801Ex) is an explosion-proof lithium-ion battery manufactured by Hytera. ●It is a lithium-ion battery for the HP708 portable radio used for onboard communication, compliant with the US explosion-proof standard UL 913 and the Canadian explosion-proof standard CSA 22.2. ●It can operate the HP708 for approximately 25 hours at maximum. ●It complies with the explosion-proof ib 2B Ex standards. ●It is a standard component of the HP708 main unit and can be purchased as a replacement or spare. ●It can be charged with the rapid charger CH10L27 + AC adapter PS1027 or the six-bay charger MCL32. *For more details, please feel free to contact us.

• others

The EHS27-Ex (EHS27Ex) is an explosion-proof earphone microphone made by Hytera. It is a tie-pin microphone + earphone for the rugged UL explosion-proof commercial smart device PNC460U. *Please note that it is for UL explosion-proof use and is not compatible with the non-explosion-proof PNC460. *It is UL explosion-proof compliant. *For more details, please feel free to contact us.

• others

The WX-CT200 (WXCT200) is a portable transceiver manufactured by Panasonic. It is the main unit of a 1.9GHz digital wireless intercom system compliant with J-DECT standards. It can be used with up to 100 units. The main unit can be hung around the neck with the included strap, and calls are made using the built-in microphone and earphones. The calling method is press-to-talk (communication is possible while the talk button is pressed). Additionally, you can connect a separately sold talk microphone (with earphones) WX-CM210 to communicate in a lapel microphone format. The calling methods include press-to-talk (communication is possible while the talk button is pressed) and talk lock (communication is possible by pressing the talk button for more than one second, and communication ends by pressing the button for more than one second again). It supports all-call (simultaneous communication with up to 6 units), group calls (simultaneous communication with up to 3 units), and hierarchical group calls. Group operation settings and changes can be easily made with the free "Operation Support Software." It has a lightweight design of 56g. With a wide frequency range of 100Hz to 8kHz and Panasonic's proprietary DNR (Digital Noise Reduction) technology, it reduces surrounding noise and provides clear sound quality.

• others

● The WX-CM210 (WXCM210) is a talk microphone made by Panasonic. ● Earphones (3.5φ) are also included. The earphones come with three sizes of ear tips (large, medium, small). ● This is an earphone microphone for the portable transceiver WX-CT200. ● It connects to the WX-CT200 using the included transceiver connection cable. The connection cable has a coiled section, making it less likely to break if snagged. ● The microphone is a bidirectional electret microphone. ● There is a clip on the back of the microphone that allows it to be attached to clothing. ● The microphone itself is compact and lightweight, weighing about 17g (approximately 20g including the windscreen), making it comfortable to wear. ● A windscreen is also included to prevent wind noise. *For more details, please feel free to contact us.*

• others

The WX-CR200 (WXCR200) is an antenna station manufactured by Panasonic. It is an antenna unit for the Panasonic J-DECT compliant 1.9GHz band digital wireless intercom system (multi-party simultaneous communication intercom). Up to 100 portable transceiver units WX-CT200 can be wirelessly connected to a single antenna station. It can be installed on the ceiling or wall and wired to the separately sold center unit WX-CX200 using a CAT5/CAT5e/CAT6 straight cable. The wiring distance between the WX-CX200 and WX-CR200 can be up to 200 meters. A single center unit WX-CX200 can connect up to 12 antenna stations. It comes with two omnidirectional antennas (external). The reception method is diversity reception.

• others

The WX-SB100 (WXSB100) is a rechargeable battery pack made by Panasonic. It is a lithium-ion battery for the portable transceiver WX-CT200 and wireless microphones WX-ST100 and WX-ST300. The battery capacity is 3.7V DC / 700mAh. It can operate the WX-CT200 for approximately 15 hours, based on a usage ratio of transmission: reception: standby = 1:1:8. It can be charged with the separately sold charger WX-Z3040A, with a maximum charging time of 4 hours. For more details, please feel free to contact us.

• others

● The WX-CM200 (WXCM200) is a center microphone manufactured by Panasonic. ● It is a center microphone for the Panasonic J-DECT compliant 1.9GHz digital wireless intercom system (multi-party simultaneous communication intercom). ● It connects to the separately sold center unit WX-CX200 using a CAT5/CAT5e/CAT6 straight cable. The wiring distance between the WX-CX200 and WX-CM200 is up to 50m. ● By connecting to the center unit WX-CX200, two-way communication with the portable transceiver WX-CT200 is possible. Individual calls can also be made. ● An amplifier-equipped speaker can be connected for audio confirmation. ● The power supply is DC24V, provided from the center unit WX-CX200. *For more details, please feel free to contact us.*

• others

● The WX-CZ200 (WXCZ200) is a charger (non-contact charging method) made by Panasonic (PANASONIC). ● The WX-CZ200 is a charger for the separately sold portable transceiver WX-CT200. ● It can charge up to 5 portable transceivers WX-CT200 and 2 separately sold battery packs WX-SB100 simultaneously using non-contact charging. ● The battery pack can also be charged individually. ● The charging time is approximately 4 hours at maximum. ● It uses a non-contact charging method. ● A dedicated AC adapter is included. It can be charged from a household power supply of AC100V. *For more details, please feel free to contact us.

• others

The AR-CT200K (ARCT200K) / AR-CT200B (ARCT200B) is a dedicated case for portable transceivers manufactured by Artex Co., Ltd. (with a belt buckle). The AR-CT200K is black, while the AR-CT200B is brown. It is a recommended case for the Panasonic portable transceiver WX-CT200. The back of the case has a belt clip, allowing it to be attached to a belt or similar items. It protects the transceiver from scratches and dirt. *For more details, please feel free to contact us.*

• others

●MBZ-2 (MBZ2) is a dustproof unit for the ICOM IP50G. ●By attaching it to the IP gateway IP50G, it protects the terminal and achieves a dustproof performance of IP5X. It can be safely used in outdoor environments or areas with dust. *It has been tested by leaving it in a dust environment with a concentration of 2 kg of test dust per cubic meter for 8 hours, after which it was retrieved and continued to function. ●When combined with the separately sold MB-89, it can be securely fixed to a mast. *For more details, please feel free to contact us.

• others

The WX-CX200 (WXCX200) is a center unit manufactured by Panasonic. It serves as the core device of the Panasonic J-DECT compliant 1.9GHz digital wireless intercom system (multi-party simultaneous communication intercom). It is ideal for staff communication in stores, parlors, and halls. It controls the operation of the portable transceiver WX-CT200. Through the separately sold antenna station WX-CR200, it enables two-way communication between the separately sold portable transceiver WX-CT200 and two-way communication with the separately sold center microphone WX-CM200. It is suitable for system construction from small to large scale. Up to 12 antenna stations can be connected to a single center unit, and up to 100 WX-CT200 handsets can be connected to a single antenna station. However, the maximum number of handsets that can be connected per system is 100. *For more details, please feel free to contact us.

• others

● WX-CZ001 (WXCZ001) is an earphone kit made by Panasonic. ● It is an earphone kit for the portable transceiver WX-CT200 and the talk microphone WX-CM210. ● It comes in a set of two. ● It includes three sizes of ear tips: large, medium, and small. ● The cable length is 50 cm. *For more details, please feel free to contact our company.

• others

The FT-710AESS (FT710AESS) is a 50MHz SDR transceiver manufactured by Yaesu. A second-class amateur radio operator license is required for use. It features an SDR receiving circuit configuration that emphasizes basic performance. It has excellent close multi-signal characteristics due to a powerful RF front end. - RMDR: 113dB+ - BDR: 127dB+ - 3rd IMDR: 102dB+ - TX Phase Noise: -143dBc/Hz It is equipped with band-pass filters (BPF) divided by amateur bands. It has a built-in high-speed automatic antenna tuner. It effectively removes interference using high-speed DSP. It features AESS, which produces a three-dimensional high-quality sound. It has a 4.3-inch TFT full-color touch panel display. It includes a 3D spectrum scope display (3DSS). It is equipped with a VMI (VFO Mode Indicator) that allows for quick confirmation of operating status. There is also a 'PRESET' mode that is optimal for FT8 operation. It is equipped with an external display terminal (DVI-D).

• others

The DK-SF08G (DKSF08G) is a GPS location information system manufactured by Alinco. It is a compact GPS tracker that communicates via Sigfox. It transmits location data obtained from signals from GPS satellites to smartphones and tablets anywhere within the Sigfox area using Sigfox communication. *Sigfox is one of the LPWA (Low Power Wide Area) networks, which covers 98% of the population in Japan and is a global IoT network. It is characterized by low cost, low power consumption, and long-distance transmission. In Japan, Kyocera Communication Systems Co., Ltd. operates services using the frequency band regulated as active tags in the 920MHz band. It is deployed in over 70 countries worldwide (as of January 2023), using the 868MHz band in Europe, the 902MHz band in the United States, and the 920MHz band in the Asia-Pacific region. *It can also be integrated with a web browser application from Alinco under a separate contract.

• others

● SKZ-EP-000003 (SKZEP000003), SKZ-EP-000004 (SKZEP000004), SKZ-EP-000005 (SKZEP000005), and SKZ-EP-000006 (SKZEP000006) are standard model bone conduction earphones OpenRun made by Shokz (formerly AfterShokz). ● They are wireless earphones and microphones that can be used with both radios and smartphones. * Please note that while we are conducting operational verification with radios, transceivers, and intercoms internally, we cannot guarantee their operation. ● They connect via Bluetooth 5.1. ● The model number varies by color. - SKZ-EP-000003: Black - SKZ-EP-000004: Gray - SKZ-EP-000005: Blue - SKZ-EP-000006: Red ● They are IP67 dustproof and waterproof. * They cannot be used for swimming. ● They feature fast charging capability. Charging time: approximately 1.5 hours, and 10 minutes of charging provides about 1.5 hours of use. ● With the built-in battery, the standby time is approximately 240 hours, and continuous playback is about 8 hours.

• others

● DK-SF11CA (DKSF11CA) is the Sensor FOX Care Regular Delivery 2 made by Alinco. ● Alinco's "Care Regular Delivery 2" is an intercom-type IoT device that communicates the risk of heatstroke and daily safety to distant family members. ● Communication is done via Sigfox. ● The first generation Care Regular Delivery DK-SF01CA has been equipped with a heatstroke alert function. It can be used to inform distant family members about the risk of heatstroke and daily safety. ● It can perform three functions: "Heatstroke Alert Function," "Regular Health Check," and "Emergency Notification." ● During the contract, Alinco will conduct a hearing with the customer to set and program the email address and template message content before delivery. ● It operates using a household power supply of AC100V with the included AC adapter. Additionally, two AA alkaline batteries or two AA lithium batteries (sold separately) can also be used. It operates for about one year with an average number of notifications.

• others

The PNC460U is a rugged, SIM-free business smart device manufactured by Hytera. It is an LTE smart device with Android™ 12 OS that can be used as an IP radio (Hytalk) and a mobile phone. Since it is SIM-free, the SIM card is sold separately, and you can also use your own. It features an explosion-proof structure compliant with UL913/TIA4950 and CSA22.2 standards, making it safe to use in environments where explosive atmospheres are present. It has high ruggedness and durability, with shock resistance compliant with MIL-STD-810 standards and IP68 dust and water resistance. It is equipped with a large-capacity battery (BL4501-Ex / UL explosion-proof lithium-ion 4,580mAh) that allows for long continuous use, and the battery is replaceable. It can be used as both a mobile phone and an IP radio (Hytalk IP radio). It supports dual Nano SIMs, making it suitable for BCP measures. It is equipped with a powerful camera featuring a 50-megapixel high-quality rear camera, which includes HDR technology and anti-shake algorithms. *For more details, please feel free to contact us.*

• others

The EME-90WNC (EME90WNC) is a wireless headset for helmets made by Alinco, equipped with noise cancellation and compatible with app radios. It pairs with a smartphone (or mobile device) that has the Air-InCom (ACP-100 / ACP-101) or Air-InCom Lite (ACP-100L / ACP-101L) app installed via Bluetooth 4.2. It is designed to be worn on a helmet. The PTT button is large enough to be used even while wearing gloves. The PTT button switches between sending and receiving. If the app is set to PTT hold, pressing the PTT key once allows for a call, and pressing it again ends the call, enabling hands-free operation. It can also answer regular phone calls from a smartphone when not in an app call. It features high-performance noise cancellation, allowing for clear voice communication by canceling surrounding noise.

• others