1711~1755 item / All 1806 items
Displayed results
Filter by category
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationContact this company
Contact Us OnlineBefore making an inquiry
Download PDF1711~1755 item / All 1806 items
Filter by category
●The SRNX1D rental device is an IP radio made by YAESU. It can be used for calls nationwide in Japan with a Docomo SIM. ●Calls via Wi-Fi are also possible. ●No license is required for use. Rentals are available for a minimum period of one day throughout Japan. ●There are no communication fees for rentals. ●It supports group, individual, and broadcast calls. ●Simultaneous hands-free calls can be made like a phone, with no limit on the number of participants. ●It has a strong waterproof and dustproof performance rated IP67. ●The battery life is approximately 20 hours. *This is an estimated time based on single-channel operation with GPS/Wi-Fi off, using a transmission ratio of 5: reception 5: standby 90. *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration● The IP210H1 rental device is a wireless mobile IP phone that allows nationwide calls in Japan using the au 4G/LTE network. ● It can be used without a license. Rentals are available for periods starting from one day across Japan. ● With the standard rental plan, it can be used in IP wireless mode (LTE). *Note: Using it as a WLAN transceiver or IP phone (landline/internal phone) requires prior configuration, making it suitable for long-term rental (subscription) plans. ● There are no communication fees for rentals. ● Supports simultaneous calls. Primarily, it operates like a mobile phone with one-on-one communication, but it also supports multi-party calls where a third party can join the conversation at any time without waiting for the end of a conversation. Essentially, there is no limit on the number of simultaneous calls. *Note: Simultaneous calls can be made even without using an earphone microphone. ● You can also choose a speaker microphone instead of an earphone microphone. ● It maintains IP57 waterproof and dustproof performance, functioning without issues even when used outdoors. *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration●BP-315 (BP315) is a lithium-ion battery manufactured by Icom. The manufacturer's model number is BP-315#18. ●It is a high-capacity battery for the IP transceiver (LTE + WLAN compatible) IP510H. ●The battery capacity is 3150mAh/7.2V. ●The operating time is as follows: ・When used in LTE mode with IP510H: Approximately 26 hours ・When used in WLAN mode with IP510H: Approximately 58 hours ●The charging time is as follows: ・When using AC adapter BC-258: Approximately 200 minutes ・When using the connected charger BC-269: Approximately 240 minutes ●The waterproof performance is based on the connected main unit. The IP510H is IPX7 waterproof. *For more details, please feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration● The AX-HM250 (AXHM250) is a helmet mount manufactured by Zacty Corporation. ● It is a helmet mount for the CX-WE100 camera, which is used for stabilizing footage while mounted on a helmet. ● It is convenient for hands-free video recording from the wearer's perspective. ● The mounting position can be switched between left and right. ● The camera unit can be attached and detached with one touch. ● It can also be replaced with the included fixed arm. *For more details, please contact our company.*
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe USB3-AFCM01BK (USB3AFCM01BK) is a USB conversion cable A to C made by Elecom. It is necessary when connecting the main unit ST#7704 of the remote support wearable camera U-BOX AT with the stabilization cameras CX-WE100 and CX-WE300. It converts the connector of the stabilization cameras CX-WE100 and CX-WE300 from Type-A to Type-C. *For U-BOX AT (WT/WZ) DE200, it is not needed as there is a Type-A interface. The cable length is approximately 8 cm (excluding connectors).
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe HM-257SJ (HM257SJ) is an earphone microphone made by Icom. It is an earphone microphone for Icom's 9-pin spring connector digital simple radios and commercial radios. It is a set that includes an earhook earphone and a PTT lapel microphone. There is a metal clip on the back of the microphone, allowing it to be attached to clothing. It is a lightweight type. *For more details, please feel free to contact our company.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration●KT001 (KT-001) is a noiseless microphone made by KTEL. ●It is a noiseless microphone specifically designed for jet-type helmets. ●This microphone is mounted on a jet-type helmet when using a radio in motorcycles and other vehicles. ●It is a wind noise canceling microphone, making it difficult to pick up wind noise while riding. ●The length of the flexible pipe is 180mm. ●Modification of the helmet is required. *For more details, please feel free to contact our company.*
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration●KTM001 (KTM-001) is a new compact, lightweight, noise-free microphone manufactured by KTEL. ●It is a microphone specifically designed for use with jet-type helmets with a front shield when using a radio on a motorcycle. ●The pipe length is 180mm. ●It suppresses noise and allows for clear audio transmission. ●It is compact and lightweight. ●Helmet modification is required. *For more details, please feel free to contact our company.*
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration●KT002 (KT-002) is a noiseless microphone made by KTEL. ●It is a noiseless microphone specifically designed for full-face helmets when using a radio on a motorcycle. ●Since it is a noise-canceling microphone, it is easy to communicate even while riding. ●It is necessary to make a microphone mounting hole with a diameter of about 28mm on the pilot surface in front of the helmet's mouth. *For more details, please feel free to contact us.*
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration● KT003 (KT-003) is a noiseless microphone made by KTEL. ● It is a half-type helmet microphone specifically designed for use with radios on motorcycles. ● Since it is a noise-canceling microphone, it is easy to communicate even while riding. ● The flexible pipe is 210mm long. ● Please create a microphone mounting hole with a diameter of 4mm by peeling back the inner lining on the left side of the helmet. To maintain the helmet's strength, please make the hole as close to the bottom edge as possible. *For more details, please feel free to contact us.*
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration●KTM002 (KTM-002) is a new compact, lightweight, noise-free microphone made by KTEL. ●It is a microphone specifically designed for full-face helmets when using radios on motorcycles and other vehicles. ●It suppresses noise and allows for clear audio transmission. ●It is small and lightweight. *For more details, please feel free to contact our company.*
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration● KT004 (KT-004) is a 1-speaker set made by KTEL. ● It is a speaker microphone specifically designed for full-face helmets when using a radio on a motorcycle or similar vehicles. ● It suppresses noise and allows for clear audio transmission and reception. ● It is compact and lightweight. ● It comes with a volume adjustment feature. ● There is one speaker. ● Drilling into the helmet is required. *For more details, please feel free to contact our company.*
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration●KT005 (KT-005) is a 2-speaker set (mono) made by KTEL. ●It is a speaker microphone specifically designed for full-face helmets when using a radio on a motorcycle. ●It is a mono type. ●It comes with a volume adjustment feature. ●It suppresses noise and allows for clear audio transmission and reception. ●It is compact and lightweight. ●There are two speakers. ●Drilling holes in the helmet is required. *For more details, please feel free to contact our company.*
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration●KT006 (KT-006) is a 2-speaker set (stereo) made by KTEL. ●It is a speaker microphone specifically designed for full-face helmets when using a radio on a motorcycle or similar. ●It comes with a volume adjustment feature. ●There are two speakers. ●It is stereo type. ●It suppresses noise and allows for clear audio transmission and reception. ●It is compact and lightweight. ●Drilling holes in the helmet is required. *For more details, please feel free to contact our company.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe KTM004 (KTM-004) is a compact noise-free microphone kit for full-face helmets made by KTEL. It is a microphone and speaker specifically designed for use with radios on motorcycles and similar vehicles. It features a volume adjustment function. There is one speaker. It suppresses noise and allows for clear audio transmission and reception. It is small and lightweight. Drilling holes in the helmet is required. *For more details, please feel free to contact our company.*
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration●KTM006 (KTM-006) is a compact noise-canceling microphone kit for full-face helmets made by KTEL. ●It is a microphone and speaker specifically designed for use with radios on motorcycles and similar vehicles. ●It is a stereo type. ●There are two speakers. ●It features a new compact noise-canceling microphone. ●It comes with a volume adjustment function. ●It reduces noise and allows for clear audio transmission and reception. ●Drilling holes in the helmet is required. *For more details, please feel free to contact our company.*
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration●KT007 (KT-007) is a 1-speaker set with volume adjustment made by KTEL. ●It is a speaker microphone specifically designed for jet-type helmets when using a radio on a motorcycle. ●It suppresses noise and allows for clear audio transmission and reception. ●It is compact and lightweight. ●It comes with a volume adjustment feature. ●There is one speaker. ●Drilling a hole in the helmet is required. *For more details, please feel free to contact our company.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration●KT008 (KT-008) is a 2-speaker set/monoral with volume adjustment made by KTEL. ●It is a speaker microphone specifically designed for jet-type helmets when using a radio on a motorcycle. ●It suppresses noise and allows for clear audio transmission and reception. ●It is compact and lightweight. ●It comes with a volume adjustment feature. ●There are two speakers. ●It is monoral. ●Drilling holes in the helmet is required. *For more details, please feel free to contact us.*
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration●KT009 (KT-009) is a 2-speaker SET/stereo with volume adjustment made by KTEL. ●It is a microphone speaker specifically designed for jet-type helmets when using a radio on a motorcycle. ●It suppresses noise and allows for clear audio transmission and reception. ●It is compact and lightweight. ●It comes with a volume adjustment feature. ●There are two speakers. ●It is stereo. ●Drilling holes in the helmet is required. *For more details, please feel free to contact our company.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration●KTM007 (KTM-007) is a compact noiseless microphone kit for jet helmets made by KTEL. ●It is a microphone speaker specifically designed for full-face helmets when using a radio on a motorcycle or similar vehicles. ●It comes with a volume adjustment feature. ●There is one speaker. ●It suppresses noise and allows for clear audio transmission and reception. ●It uses a new type of small and lightweight microphone. ●Drilling holes in the helmet is required. *For more details, please feel free to contact our company.*
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration●KTM009 (KTM-009) is a compact noise-free microphone kit for jet helmets made by KTEL. ●It is a microphone and speaker specifically designed for use with radios on motorcycles and similar vehicles. ●It is a stereo type. ●There are two speakers. ●It features a new compact noise-free microphone. ●It has a volume adjustment function. ●It suppresses noise, allowing for clear audio transmission and reception. ●Drilling holes in the helmet is required. *For more details, please feel free to contact us.*
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration● The AN-23 (AN23) is a smartphone-specific ear-hook type earphone microphone made by F.R.C. ● It is designed for smartphones equipped with a φ3.5mm phone plug. It can be used with transceiver apps like LINE WORKS installed on your smartphone. ● The ear-hook design makes it less likely to fall out of your ear. ● There is a clip on the back of the lapel microphone. ● A short press of the PTT button starts transmission, and pressing it again returns to receiving. ● When a call comes in, pressing the PTT button answers the call, allowing for simultaneous conversation. Pressing it again ends the call. ● The PTT button can also control music apps. For example, play/pause is a short press, and skipping tracks is a double press. *For more details, please feel free to contact us.*
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe AN-24 (AN24) is a canal-type earphone microphone specifically designed for smartphones, manufactured by F.R.C. It is compatible with smartphones equipped with a φ3.5mm phone plug and can be used with transceiver apps like LINE WORKS installed on your smartphone. The canal type that fits inside the ear provides high sound insulation and a structure that is less likely to fall out of the ear. There is a clip on the back of the tie-pin microphone. A short press of the PTT button starts transmission, and pressing it again returns to reception. When a call comes in, pressing the PTT button answers the call, allowing for simultaneous conversation. Pressing it again ends the call. The PTT button can also be used to control music apps, for example: short press for play/pause, double press to skip tracks. *For more details, please feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe AN-26 (AN26) is a tie-pin type PTT microphone designed specifically for smartphones, manufactured by F.R.C. Since it is just the microphone, please use it in combination with separately sold φ2.5mm earphones. The recommended earphones from the manufacturer are as follows: - Inner type earphone FEP-201 - Ear hook earphone FEP-202 - Canal type earphone FEP-203 - D-type hook earphone FEP-204 - Ear pad hook type earphone FEP-205 - Ear hook speaker type earphone FEP-206 You can use it with a smartphone equipped with a φ3.5mm phone plug and installed with transceiver apps like LINE WORKS. There is a clip on the back of the tie-pin microphone. Pressing the PTT button briefly starts transmission, and pressing it again briefly returns to reception. When a call comes in, pressing the PTT button answers the call, allowing for simultaneous conversation. Pressing it again ends the call. The PTT button can also be used to control music apps, such as play/pause with a short press and skipping tracks with a double press. For more details, please feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe AP-26 (AP26) is a tie-pin type PTT microphone with a built-in battery, designed specifically for smartphones by F.R.C. Since it is just a microphone, please use it in combination with separately sold φ2.5mm earphones. The recommended earphones from the manufacturer are as follows: - Inner type earphone FEP-201 - Ear hook type earphone FEP-202 - Canal type earphone FEP-203 - D-type hook type earphone FEP-204 - Ear pad hook type earphone FEP-205 - Ear hook speaker type earphone FEP-206 You can use it with a smartphone equipped with a φ3.5mm phone plug and installed with transceiver apps like LINE WORKS. There is a clip on the back of the tie-pin microphone. *For more details, please feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration● The WX-ST200 (WXST200) is a handheld wireless microphone made by Panasonic. ● It is a wireless microphone for the Panasonic 1.9GHz digital wireless microphone system. ● It can be used in conjunction with wireless receivers WX-SR202DAN / WX-SR204DAN, additional wireless receiver WX-SE200DAN, WX-SR202A / WX-SR204A, WX-SE200A, antenna station WX-SR152, portable wireless amplifier WX-PS200, and others. ● With the adoption of a high compression audio codec, it offers a wide audio frequency range of 100Hz to 15kHz and a newly developed noise suppression feature for clear sound quality. ● The low-cut filter function reduces noise. ● It has an external input function, allowing you to easily connect various audio sources (such as computers and music players) for playback. * For more details, please feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe WM-3000A (WM3000A) is a speech wireless microphone manufactured by UNI-PEX Co., Ltd. It operates in the 300MHz band and supports 13 channels. It features a unidirectional electret condenser design, making it less likely to pick up surrounding noise. With a clear and defined sound quality, it is ideal for speech applications. It has obtained technical standard conformity certification. The microphone uses a crystal-controlled PLL synthesizer system, allowing the selection of any one of 13 frequencies for use. It also includes noise reduction and tone squelch features. The antenna is of the built-in type. It operates for approximately 32 hours on a single AA alkaline battery. *For more details, please feel free to contact us.*
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe 75CSSK2H (75-CSSK-2H) is a 75cm snow-melting device equipped CS antenna manufactured by Nippon Antenna. It is a 75cm CS antenna. This antenna is designed to prevent snow damage, featuring a heater on the reflector and converter arm, as well as a converter roof. The compatible mast diameter is φ48.6mm to φ89.1mm. The antenna mount and CS converter unit are sold separately. It is a RoHS compliant product. It is compatible with J-Alert. *For more details, please feel free to contact us.*
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe 120CSSKH (120-CSSKH) is a 120cm snow-melting device-equipped CS antenna manufactured by Nippon Antenna. It is a 120cm type antenna for receiving one satellite with a snow-melting device. This antenna is designed to prevent snow damage, equipped with heaters on the reflector and converter arm, as well as a converter roof. It can be used in combination with various CS converter units. The antenna mount and CS converter unit are sold separately. The compatible mast diameter is φ114.3mm. It is a RoHS compliant product and compatible with J-Alert. *For more details, please feel free to contact us.*
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration● The HP798Ex IIC (HP798Ex 2C) is a specific low-power intrinsically safe explosion-proof portable radio manufactured by Hytera. ● No license or qualifications are required. No application is necessary. ● It has an intrinsically safe explosion-proof structure that meets JIS standards. Ex ib IIC T4 Gb (gas) / ib IIIC T120°C Db (dust). It can be safely used in hazardous areas where flammable gases and dust are present. ● It is a certified model according to the Japan Factory Electrical Equipment Explosion Protection Guidelines (International Harmonized Explosion Protection Guidelines 2020), and complies with international explosion protection standards "IECEx" and European explosion protection standards "ATEX." ● It meets MIL-STD-810H for shock resistance and durability. ● It has the strongest dustproof and waterproof performance with an IP68 rating. ● The operating temperature range is from 25°C to 60°C. ● With AI noise canceling, it automatically removes noise according to the surrounding environment. ● It is equipped with a 2.4-inch LCD display. ● The battery life is as follows: - Included high-capacity battery (2,150mAh): up to 24 hours *Estimated time based on a transmission ratio of 5: reception 5: standby 90.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration●CSEA25 (CSEA-25) is a CS/BS preamplifier manufactured by Nippon Antenna. ●It has a maximum gain of 22dB. ●This preamplifier is compatible with 4K and 8K broadcasts (3.2GHz) and is used to connect a receiving amplifier to a receiving antenna. ●It amplifies BS-C-IP signals (1000–3224MHz) while allowing FM, VHF, and UHF signals (10–770MHz) to pass through. ●Current can pass between the output terminal and the BS/CS input terminal. ●Current can also pass between the output terminal and the U/V input terminal with a switch operation. ●When installing on a mast, please use a separately sold HI Kanagu or commercially available stainless steel band. ●It is for joint reception. ●It is a RoHS compliant product. ●It is compatible with J-Alert. *For more details, please feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration● FC-ASJ4(J) and FC-ASJ5(J) are CS converter units (local oscillator 11.3GHz) manufactured by Nippon Antenna. ● This product is a set that includes a feed horn and a CS converter (local oscillator 11.3GHz). ● It converts signals in the 12GHz band to the 1GHz band. ● It has low noise. With an excellent noise figure (NF), it can receive clear images with a good S/N ratio. ● It is for joint reception. ● It is a product compatible with J-Alert. *For more details, please feel free to contact us.*
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration● WX-SA001 (WXSA001) is an antenna power supply unit manufactured by Panasonic. ● It is a unit that supplies power to wireless antennas such as the 1.9GHz band digital wireless microphone system's WX-SA250A (for medium to large spaces). ● When using multiple systems, it connects to the reference antenna of the main system to synchronize. ● It is used when wirelessly synchronizing multiple receiving systems. ● Even when the power of wireless receivers like WX-SR202A and WX-SR204A is off, it is possible to supply power to the wireless antenna. ● When the power of the wireless receiver is off, antenna field settings can be configured with WX-SA001. *For more details, please feel free to contact us.*
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration● WX-SA002 (WXSA002) is a coaxial conversion unit manufactured by Panasonic. ● It is a unit that converts LAN cables (CAT5/CAT5e/CAT6 straight cables) used for connecting wireless antennas and wireless receivers into coaxial cables. ● It allows the use of a 1.9GHz band digital wireless system (for medium to large spaces) by utilizing existing coaxial cables. ● Coaxial cables can be used up to a maximum length of 100m. ● It is provided as a set for both the receiver side and the antenna side. ● When at least one coaxial conversion unit is connected, a maximum of 8 wireless microphones can be used. *For more details, please feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration●CSE452 (CSE-452) is a CS/BS booster manufactured by Nippon Antenna, compatible with 3224MHz and has a gain of 45dB. ●It is a CS/BS booster with a maximum gain of 45dB, supporting 4K and 8K broadcasts (3.2GHz). ●It is a high-shield type that achieves unwanted radiation of 34dBμV/m or less with the device alone. ●It is designed for joint reception. ●It is a RoHS compliant product. ●It is compatible with J-Alert. *For more details, please feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe WX-SP104R1 (WXSP104R1) is a base station manufactured by Panasonic. It is designed for small spaces. This unit supplies power to the antenna station WX-SR152 of the 1.9GHz band digital wireless microphone system and outputs audio from wireless microphones or portable wireless transmitters. *Compatible wireless microphones include: boundary type wireless microphone WX-ST700, handheld type wireless microphone WX-ST200, tabletop wireless transmitter WX-ST600 + gooseneck microphone WM-KG645, waterproof type wireless microphone WX-ST210, dynamic type wireless microphone WX-ST250, lapel type wireless microphone WX-ST400, and wireless transmitter WX-ST510, among others. *Audio can be adjusted by volume for each input system, allowing for separate outputs and mixing outputs for each input system. *For more details, please feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe WX-SR152 (WXSR152) is an antenna station manufactured by Panasonic. It is an antenna-integrated receiver designed for small spaces. It serves as an antenna-integrated receiver for wireless microphones or portable wireless transmitters in the 1.9GHz digital wireless microphone system. Compatible devices include the boundary-type wireless microphone WX-ST700, handheld wireless microphone WX-ST200, tabletop wireless transmitter WX-ST600 with gooseneck microphone WM-KG645, splash-proof wireless microphone WX-ST210, dynamic wireless microphone WX-ST250, tie-clip wireless microphone WX-ST400, and wireless transmitter WX-ST510, among others. The 1.9GHz band enables high sound quality and stable communication resistant to radio interference and crosstalk. With the adoption of a compressed audio codec, it offers a wide audio frequency range of 100Hz to 15kHz and a newly developed noise suppression function for clear sound quality. The power is supplied from the base station WX-SP104R1.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration●SHB-28 (SHB28) is a quick release holster made by YAESU (Yaesu Musen/Standard Horizon). ●It is designed for the specific low-power transceivers SRFD51 / SRFD51-L and SRFD55 / SRFD55-L made by YAESU (Yaesu Musen/Standard Horizon). ●It is for use with the lithium-ion battery SBR-42LI. *Please use the quick release holster SHB-33 when using the compact high-capacity lithium-ion battery SBR-51LI. ●It comes with a belt clip compatible with belt widths of 4.6 cm. ●The radio can be attached and detached with one touch. *For more details, please feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration● EBP-76 (EBP76) is a lithium-ion rechargeable battery pack manufactured by Alinco (ALINCO). ● It is a rechargeable battery for the analog simple business radio DJBU10C. ● It has a capacity of 7.4V/1800mA. ● It powers the DJ-BU10C for approximately 10 hours. *For more details, please feel free to contact us.*
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe EL-250-5A (EL2505A) is a 1/4λ flexible element for vehicles in the 260MHz band, manufactured by Nippon Antenna. It is a 1/4λ flexible element for vehicle-mounted radios in the 260MHz band. The supported frequency range is 259 to 275MHz. The total length of the element is 250mm, making it 24mm shorter than other 1/4λ whip elements from the same manufacturer. It uses nickel-titanium material and features a flexible structure. The term "flexible" refers to the property of bending gracefully under external force. It can bend like a bow when it hits an obstacle, reducing the risk of breaking. Please use it in combination with the separately sold bases listed below. - For frequencies 260 to 275MHz, use the following bases: WH-BA3-M6-09, WH-BA5-M6-09, WH-BAB-M6-09, WH-BAN-M6-09. - For frequencies 259 to 266MHz and 269 to 275MHz, use the following bases: MG-BA3-09, MG-BA5-09. For more details, please feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe UDF90W / UDF90B (UDF-90-W / UDF-90-B) is a slim UHF antenna manufactured by Nippon Antenna, designed for medium to strong signal areas. It is an outdoor digital terrestrial antenna suitable for strong and medium signal regions, equivalent to 20 elements, and is capable of receiving digital terrestrial broadcasts. The UDF90W is white, while the UDF90B is black. It can be easily installed using the included multi-bracket on antenna masts, balcony railings, or walls. Additionally, it can be installed on steel pipe columns using commercially available stainless steel bands sold separately. This antenna is exclusively for horizontal polarization reception, with receiving channels ranging from 13 to 52. The multi-bracket is compatible with antenna masts with a diameter of φ22 to 49mm. For more details, please feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration● The WH-260-NJ-09 F=260-275 (set) is a 260MHz band vehicle-mounted drilling type antenna without cable, manufactured by Nippon Antenna. * F=260-275 represents the frequency, and (set) means it includes elements, a base, and a coaxial cable. ● It features a drilling mount base with a mounting hole diameter of Φ16mm. ● This is a set product that includes a vehicle-mounted drilling type base (element mounting part M-6 screw) without cable N-JWH-BAN-M6-09 and a 260MHz band vehicle-mounted 1/4λ element (for WH) EL274 (antenna length EL27.4cm). ● It is a λ/4 antenna for radios operating in the frequency range of 260 to 275MHz. * λ (lambda) refers to wavelength. ● It is a whip antenna with a drilling mount type. * A whip antenna is one that has no directivity and can receive and transmit signals from any angle. ● It comes with an N-J type connector and is compatible with a mounting hole diameter of Φ16mm. ● This product complies with safety standards. * For more details, please feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration● The H-450 (H450) is an H-type antenna for window frames in the 450MHz band, manufactured by Nippon Antenna. ● It operates at a specified frequency within the range of 330 to 470MHz. Please specify the center frequency fo (in MHz) when placing your order. ● This is a vertical polarization omnidirectional 1/2λ dipole antenna for radio equipment. * A dipole antenna is one where elements less than half the wavelength are symmetrically arranged, allowing for the transmission and reception of horizontal radio waves in both directions. ● It is designed for mounting on the window frames of mobile stations such as fire trucks, jeeps, and passenger cars. ● The connector is N-J. * For more details, please feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe HMG-450-5B-09 (HMG4505B09) is a high-gain magnetic antenna for vehicles manufactured by Nippon Antenna, designed for the 400MHz band (5D-2V). It is an antenna that can be mounted on the car's rooftop using a magnet. It is a 3/4λ whip antenna for vehicle-mounted radios. A whip antenna is one that has no directionality and can receive and transmit signals from any angle. This is a high-gain antenna with excellent signal transmission capabilities. The absolute gain is 4.15dB. It comes with an antenna element, a magnetic base, and a 5D-2V coaxial cable (5m) MG-BA5-09. Note that connectors are not included. It features an attachment method that makes it easy to run cables, allowing you to connect it to the radio after installing a separately sold attachment connector. It also has a folding mechanism. For more details, please feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe HMG-450-5A-09 (HMG4505A09) is a high-gain magnetic antenna for vehicles manufactured by Nippon Antenna, designed for the 400MHz band (3D-2V). It is an antenna that can be mounted on the car's rooftop using a magnet. It is a 3/4λ whip antenna for vehicle-mounted radios. A whip antenna is one that has no directionality and can receive and transmit signals from any angle. This is a high-gain antenna with excellent signal transmission capabilities. The absolute gain is 4.15dB. The package includes the antenna element, magnetic base, and coaxial cable 3D-2V (5m) MG-BA3-09. Note that connectors are not included. It features an attachment method that makes it easy to run the cable, allowing you to connect it to the radio after installation with a separately sold attachment connector. It also has a folding mechanism. For more details, please feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration