エクセリ List of Products and Services

The EME-68ZM (EME68ZM) is a twist cord earphone (ear-hook type, straight single-axis) made by Alinco. It is an earphone for the specific low-power transceiver Lapel Talk 3DJ-PX11. Since it is ear-hook type, it is less likely to fall off from the ear and is comfortable for long hours of use. The plug is a straight single-axis type. The cable length is approximately 50 cm. *For more details, please feel free to contact our company.

• others

●EME-664C (EME664C) is a canal-type twist code earphone manufactured by Alinco (ALINCO) with a single-axis screw-in design. ●It is an earphone for the specific low-power transceiver Lapel Talk 3DJ-PX11. ●Being a canal-type that fits inside the ear, it is easy to hear sounds even in noisy environments. ●The plug is a single-axis screw-in type. ●The cable length is approximately 50 cm. *For more details, please feel free to contact our company.*

• others

● KT064 (KT-064) is a headset set with volume adjustment made by KTEL. ● It is a headset for radios. ● It is exclusively for motorcycles. ● It blocks out loud external sounds. ● Please use it for operations when not wearing a helmet. ● It comes with volume adjustment. ● The volume control is located on the side. ● It has 2 volumes and 2 speakers. *For more details, please feel free to contact our company.*

• others

● FEP-201 (FEP201) is an inner-type earphone manufactured by F.R.C. ● It is an open-air (in-ear) type with the most standard shape. ● It is compatible with microphones that have a 2.5mm earphone jack made by F.R.C. For example, it can be used in combination with the following microphones: - AN-26 - AP-26 and others. ● The plug size is 2.5mm. ● The length of the cord is 48.5cm. ● There is a clip on the cord that allows it to be attached to clothing. *For more details, please feel free to contact us.

• others

● The FEP-202 (FEP202) is an ear hook earphone manufactured by F.R.C. ● It features an open-air (in-ear) design with an ear hook. ● It is compatible with microphones that have a 2.5mm headphone jack made by F.R.C. For example, it can be used in combination with the following microphones: - AN-26 - AP-26 and others. ● The plug size is 2.5mm. ● The cable length is 41.5cm. ● There is a clip on the cable that allows it to be attached to clothing. ● It can be used in either ear. *For more details, please feel free to contact us.*

• others

● FEP-203 (FEP203) is a canal-type earphone manufactured by F.R.C. ● It is a canal type, designed to be inserted into the ear, making it easy to hear even in noisy environments. ● It is compatible with microphones that have a 2.5mm headphone jack from F.R.C. For example, it can be used in combination with the following microphones: - AN-26 - AP-26 - etc. ● The plug size is 2.5mm. ● The length of the cord is 47.5cm. ● There is a clip on the cord that allows it to be attached to clothing. *For more details, please feel free to contact our company.

• others

● FEP-205 (FEP205) is a hook-type earphone manufactured by F.R.C. ● It is an earphone with an ear hook design that is less likely to fall out of the ear. It has a structure that allows for easy hearing of surrounding sounds. ● It is compatible with microphones that have a 2.5mm earphone jack made by F.R.C. For example, it can be used in combination with the following microphones: - AN-26 - AP-26 and others. ● The plug size is 2.5mm. ● The length of the cord is 46cm. ● There is a clip on the cord that can be attached to clothing or other items. *For more details, please feel free to contact us.*

• others

The FEP-206 (FEP206) is an ear-hook speaker type earphone manufactured by F.R.C. It features a larger open-air design with ear hooks, making it less likely to fall off and comfortable for long-term use. It is compatible with microphones that have a 2.5mm earphone jack from F.R.C., and can be used in combination with the following microphones: AN-26, AP-26, FB-26YS, etc. The plug size is 2.5mm, and the cord length is 46cm. There is a clip on the cord for attaching it to clothing. It comes with two foam covers. *For more details, please feel free to contact us.*

• others

The EME-66ZC (EME66ZC) is a twist cord earphone (canal type, straight single-axis) manufactured by Alinco. It is an earphone for the specific low-power transceiver Lapel Talk 3DJ-PX11. Since it is a canal type that fits inside the ear, it is easy to hear sounds even in noisy environments. The plug is a straight single-axis. The cable length is approximately 50 cm. *For more details, please feel free to contact us.

• others

●D-0601 (D0601) is a 60MHz band 2-way splitter manufactured by Nippon Antenna. ●It evenly distributes high-frequency signals to various terminals such as radios. ●The supported frequency range is a specified frequency of 50 to 75MHz. Please specify the fo (center frequency) in MHz when placing your order. ●The connector on the antenna side is NP, and on the radio side, it is NJ. *For more details, please feel free to contact our company.*

• others

●EDC-346 (EDC346) is a 10-port charging stand manufactured by Alinco. ●It is a connected charger that can charge up to 10 units of the specific low-power transceiver Raper Talk 3DJ-PX11 simultaneously. ●It is used in combination with the separately sold AC adapter EDC-162 for connection. It can be charged from a household power supply of AC100V. ●The charging time is a maximum of about 4 hours and supports fast charging. ●With built-in Bluetooth, it can connect to a smartphone, and the functions of the DJ-PX11 placed on the stand can be set using a free app. *Please search for DJ-PX11 in the App Store or Google Play for the app. You can choose between setting it up on a PC connected via USB or on a smartphone connected via Bluetooth with the charging stand EDC-345A or EDC-346. *For more details, please feel free to contact us.

• others

●D-2601 (D2601) is a 260MHz band 2-way splitter manufactured by Nippon Antenna, operating in the 260-275MHz range. ●It evenly distributes high-frequency signals from devices such as radios to two antennas. However, if the isolation is not adequate for the transmitting and receiving splitter, please use it only for antenna coupling. ●The supported frequency range is 260-275MHz or a specified frequency within that range. Please specify the operating frequency when placing your order. ●The connector on the antenna side is NP, and on the radio side, it is NJ. ●The coaxial cable length is 1950mm. ●It is waterproof, making it suitable for outdoor use. *For more details, please feel free to contact us.*

• others

●D-4001 (D4001) is a 400MHz band 2-way splitter manufactured by Nippon Antenna. ●It evenly distributes high-frequency signals from devices such as radios to two antennas. However, if the isolation is not achieved in the transmitter/receiver splitter, please use it only for antenna coupling. ●The supported frequency range is specified frequencies from 330 to 470MHz or within a bandwidth of 20MHz. Please specify fo (center frequency) in MHz when placing your order. ●The connector on the antenna side is NP, and on the radio side is NJ. ●The coaxial cable length is 1450mm. ●It is waterproof, making it suitable for outdoor use. *For more details, please feel free to contact us.*

• others

The SV-S60 (SVS60) is a dynamic management system iGPS7plus2 manufactured by Smart Wave Telecommunications (Tom Communication Industry). It allows for the management of the location and status of IP radios such as the SV-2000 (vehicle-mounted) and SK-5000 (portable) on company PCs. It is an on-premises type that excels in security and stability compared to cloud-based systems, operating on NTT Docomo's network + closed network. The location and status of the IP radios can be automatically updated every 15 seconds, and the latest information can be obtained with each call. It is also possible to retain all log data for one year.

• others

●D-9301 (D9301) is a 900MHz band 2-way splitter manufactured by Nippon Antenna. ●It evenly distributes high-frequency signals from devices such as radios to two antennas. However, if the splitter does not provide isolation for transmission and reception, please use it only for antenna coupling. ●The supported frequency range is 850 to 940MHz. ●The connector on the antenna side is NP, and the connector on the radio side is NJ. ●The coaxial cable length is 1450mm. ●It is waterproof, making it suitable for outdoor use. *For more details, please feel free to contact our company.*

• others

The BK-32ZR (BK32ZR) is a mounting bracket for CS and BS antennas manufactured by Nippon Antenna. It is used to install satellite antennas under 50 cm on railings, grids, and walls. It complies with RoHS directives. *For more details, please feel free to contact our company.

• others

The GB-060L-2-09EL (GB-060L209EL) is a 60MHz band vehicle-mounted element (MP type) manufactured by Nippon Antenna. It is a λ/4 shortened whip antenna with a capacity grounding type for disaster prevention administrative radio equipment operating in the 60MHz band. A whip antenna is defined as an antenna that has no directivity and can receive and transmit signals from any angle. It is a designated frequency within the 60MHz band. Please specify the center frequency (fo) in MHz when placing your order. It is designed for gutter mounting and should be used in combination with the separately sold roof side bases RSB-BA3-MJ or RSB-BA5-MJ. It is the same product as the antenna element GB-060L-2A-09. The antenna length is approximately 90cm. The feeding connector is MP. It complies with the European environmental regulation RoHS directive. For more details, please feel free to contact us.

• others

●DB2-SA5W (DB2SA5W) is a 2-way splitter (hybrid type) manufactured by Nippon Antenna. ●It is a hybrid type splitter for high-frequency signals. ●It is mainly used to equally distribute high-frequency signals from antennas and radios to multiple devices (up to 2-way distribution). ●It supports a frequency range of 76 to 470 MHz (VHF/UHF band) and an output of up to 5W. ●The connector is an NJ connector. *For more details, please feel free to contact our company.*

• others

●D-1501 (D1501) is a 150MHz band 2-way splitter manufactured by Nippon Antenna. ●It evenly distributes high-frequency signals from devices such as radios to two antennas. ●The supported frequency range is from 140 to 170MHz. Please specify the center frequency (fo) in MHz when placing your order. ●The coaxial cable length is 1950mm. ●The connectors are NP on the antenna side and NJ on the radio side. ●It is waterproof, making it suitable for outdoor use. *For more details, please feel free to contact our company.*

• others

The SBR-150S-7-09EL (SBR150S709EL) is a 150MHz band element manufactured by Nippon Antenna. It is a capacitive grounded λ/4 whip antenna for 150MHz band radios. It features a shortened element. * A whip antenna is defined as an antenna that has no directionality and can receive and transmit signals from any angle. It is a specified frequency for the 150MHz band. Please indicate the fo (center frequency) in MHz when placing your order. The feed point connector is an M6 female thread. Please use it in combination with the separately sold bases SBR-BA3-09 and SBR-BA5-09. * A hex wrench is required for base installation. * For more details, please feel free to contact us.

• others

The HGW-400-PS-09 365-385 (HGW400PS09) is a high-gain element (5/8λ type) for the 400MHz band manufactured by Nippon Antenna. * A whip antenna is defined as an antenna that has no directionality and can receive and transmit signals from any angle. ● It can be used with vehicle-mounted radios operating in the 365MHz to 385MHz range. ● It is a 5λ/8 collapsible whip antenna for the 400MHz band. ● The collapsible mechanism allows for 90 degrees to the left and right, and rotation from 0 to 360 degrees. ● It is equipped with an M.P type connector. ● This is just the antenna element, so it must be used in combination with a separately sold antenna base. * For more details, please feel free to contact us.

• others

● The WH-150-84(HE)-09EL is a 150MHz band element manufactured by Nippon Antenna. ● It is a capacitively grounded λ/4 whip antenna for 150MHz band radios. * A whip antenna is one that has no directivity and can receive and transmit signals from any angle. ● It is designed for a specified frequency within the range of 140 to 170MHz. Please specify the fo (center frequency) in MHz when placing your order. ● It is a hole-mount type shortened 150MHz band element. ● The feeding part connector is an M6×1 female thread. It is used in combination with the separately sold WH-84-09 kit. * For more details, please feel free to contact us.

• others

●EDC-345A (EDC345A) is a twin charger set manufactured by Alinco. ●It comes with an AC adapter EDC-287, allowing charging from a household power supply of AC100V. ●This charger can simultaneously charge two units of the specific low-power transceiver, the Rappertalk 3DJ-PX11. ●The maximum charging time is approximately 4 hours, and it supports fast charging. ●With built-in Bluetooth, you can connect to a smartphone and configure the functions of the DJ-PX11 placed on the stand using a free app. *Please search for DJ-PX11 in the App Store or Google Play for the app. You can choose between setting it up on a PC connected via USB or on a smartphone connected via Bluetooth to the charging stand EDC-345A or EDC-346. *For more details, please feel free to contact us.

• others

The 5DV-450 (5DV450) is a 5-element Yagi antenna manufactured by Nippon Antenna for the 400 MHz band. *The Yagi antenna consists of three rods of different lengths that form a single antenna, with the shorter rod acting as a director, the middle rod as a driven element, and the longest rod as a reflector, resulting in a highly directional antenna. It was invented in 1926. *It is primarily a single-directional antenna for fixed station radios, composed mainly of an antenna, reflector elements, and director elements. *It operates at a specified frequency within the range of 340 to 480 MHz. The model number changes depending on the operating frequency. - 340 to 390 MHz: 5DV-450 F=340-390 - 390 to 480 MHz: 5DV-450 F=390-480 *Please specify the center frequency (fo/MHz) when placing your order. *The supply section and element blanket are molded with reinforced resin. *Due to its protruding design, it can be mounted with rear support. *The recommended mounting brackets for the antenna are C-30 or C-19(C). *For more details, please feel free to contact us.

• others

The 2DV-450 (2DV450) is a 2-element Yagi antenna manufactured by Nippon Antenna, designed for the 400MHz band. *The Yagi antenna consists of three rods of different lengths that form a single antenna, with the shorter rod acting as a director, the middle rod as a driven element, and the longest rod as a reflector, resulting in a highly directional antenna. It was invented in 1926. *It is primarily a single-directional antenna for fixed station radios, composed of an antenna, reflector element, and director element. *It operates at a specified frequency within the range of 340 to 480MHz. The model number changes based on the operating frequency. - 340-390MHz: 2DV-450 F=340-390 specified - 390-480MHz: 2DV-450 F=390-480 specified *Please specify the center frequency (fo/MHz) when placing your order. *The supply section and element blanket are molded with reinforced resin. *Due to its protruding type, it can be mounted with rear support. *The recommended mounting bracket for the antenna is C-28-1A. *For more details, please feel free to contact us.

• others

● TRS3G (TRS-3G) is a camera tripod mounting base manufactured by Daiwa Radio Industry (Diamond Antenna) (limited production gold model). ● It is used for camera tripods during mobile operation of radios. ● It is a bracket for attaching mobile antennas that require grounding to camera tripods. * The grounding effect increases the longer the ground wire is in contact with the ground. If the ground wire is elevated from the ground or deployed on a balcony, the radial effect decreases, and the SWR may not improve. In this case, increasing the number of ground wires or lengthening the ground wire can help. When installed on a balcony, connecting the ground wire to the railing may improve the situation. ● TRS3G is the gold version of TRS3. The antenna base has a gold texture. ● It is compatible with 1/4 inch camera screws. ● It uses a gold plating that is resistant to peeling. ● Comes with MJ-MJ connectors and a 20cm 3D-2V coaxial cable. ● Complies with the European environmental regulation RoHS directive. ● It is a limited production product. * For more details, please feel free to contact us.

• others

● The LC-204 (LC204) is a carrying case made by Icom (ICOM). The manufacturer model number is LC-204#11. ● It is designed for the IP transceiver (LTE + WLAN compatible) IP510H. ● It protects the radio from shocks and scratches. ● You can operate the keys and communicate while it is attached. ● Charging via the side USB port is possible while the carrying case is attached. ● It is compatible only when the lithium-ion battery BP-314 is installed. ● The waterproof performance is based on the connected main unit. The IP510H has an IPX7 waterproof rating. *For more details, please feel free to contact us.*

• others

● BC-269 (BC269) is a connector-type charger manufactured by ICOM. The manufacturer model number is BC-269#11. ● Up to 6 BC-269 units can be connected to charge 6 IP transceivers (LTE + WLAN compatible) IP510H simultaneously. ● It is used in combination with a separately sold AC adapter. ・ When used as a connector-type charger with a maximum of 6 units: BC-228 ・ When used as a single charger: BC-123S#64 (straight plug) ● The charging times for the IP510H are as follows: ・ Lithium-ion battery pack BP-314: (approximately 2.5 hours) ・ Lithium-ion battery pack BP-315: (approximately 4 hours) ● The charger status is indicated by a two-color charging lamp. ・ Charging: Orange ・ Charging complete: Green ・ Abnormal occurrence: Orange blinking

• others

● This is a lithium-ion battery manufactured by ICOM, model BP-314 (BP314). The manufacturer's part number is BP-314#13. ● It is a medium-capacity battery for the IP transceiver (LTE + WLAN compatible) IP510H. ● The battery capacity is 2010mAh/7.2V. ● It has an IP67 equivalent structure for immersion and dust resistance. ● The operating time is as follows: - When used in LTE mode with the IP510H: approximately 18 hours - When used in WLAN mode with the IP510H: approximately 36 hours ● The charging time is as follows: - When using the AC adapter BC-258: approximately 120 minutes - When using the connected charger BC-269: approximately 150 minutes ● The waterproof performance is based on the connected main unit. The IP510H is IPX7 waterproof. *For more details, please feel free to contact us.*

• others

●The SRNX1D rental device is an IP radio made by YAESU. It can be used for calls nationwide in Japan with a Docomo SIM. ●Calls via Wi-Fi are also possible. ●No license is required for use. Rentals are available for a minimum period of one day throughout Japan. ●There are no communication fees for rentals. ●It supports group, individual, and broadcast calls. ●Simultaneous hands-free calls can be made like a phone, with no limit on the number of participants. ●It has a strong waterproof and dustproof performance rated IP67. ●The battery life is approximately 20 hours. *This is an estimated time based on single-channel operation with GPS/Wi-Fi off, using a transmission ratio of 5: reception 5: standby 90. *For more details, please refer to the PDF document or feel free to contact us.

• Radios, walkie-talkies, and intercoms

● The IP210H1 rental device is a wireless mobile IP phone that allows nationwide calls in Japan using the au 4G/LTE network. ● It can be used without a license. Rentals are available for periods starting from one day across Japan. ● With the standard rental plan, it can be used in IP wireless mode (LTE). *Note: Using it as a WLAN transceiver or IP phone (landline/internal phone) requires prior configuration, making it suitable for long-term rental (subscription) plans. ● There are no communication fees for rentals. ● Supports simultaneous calls. Primarily, it operates like a mobile phone with one-on-one communication, but it also supports multi-party calls where a third party can join the conversation at any time without waiting for the end of a conversation. Essentially, there is no limit on the number of simultaneous calls. *Note: Simultaneous calls can be made even without using an earphone microphone. ● You can also choose a speaker microphone instead of an earphone microphone. ● It maintains IP57 waterproof and dustproof performance, functioning without issues even when used outdoors. *For more details, please refer to the PDF document or feel free to contact us.

• Radios, walkie-talkies, and intercoms

●BP-315 (BP315) is a lithium-ion battery manufactured by Icom. The manufacturer's model number is BP-315#18. ●It is a high-capacity battery for the IP transceiver (LTE + WLAN compatible) IP510H. ●The battery capacity is 3150mAh/7.2V. ●The operating time is as follows: ・When used in LTE mode with IP510H: Approximately 26 hours ・When used in WLAN mode with IP510H: Approximately 58 hours ●The charging time is as follows: ・When using AC adapter BC-258: Approximately 200 minutes ・When using the connected charger BC-269: Approximately 240 minutes ●The waterproof performance is based on the connected main unit. The IP510H is IPX7 waterproof. *For more details, please feel free to contact us.

• others

● The AX-HM250 (AXHM250) is a helmet mount manufactured by Zacty Corporation. ● It is a helmet mount for the CX-WE100 camera, which is used for stabilizing footage while mounted on a helmet. ● It is convenient for hands-free video recording from the wearer's perspective. ● The mounting position can be switched between left and right. ● The camera unit can be attached and detached with one touch. ● It can also be replaced with the included fixed arm. *For more details, please contact our company.*

• others

The USB3-AFCM01BK (USB3AFCM01BK) is a USB conversion cable A to C made by Elecom. It is necessary when connecting the main unit ST#7704 of the remote support wearable camera U-BOX AT with the stabilization cameras CX-WE100 and CX-WE300. It converts the connector of the stabilization cameras CX-WE100 and CX-WE300 from Type-A to Type-C. *For U-BOX AT (WT/WZ) DE200, it is not needed as there is a Type-A interface. The cable length is approximately 8 cm (excluding connectors).

• others

The KTM004 (KTM-004) is a compact noise-free microphone kit for full-face helmets made by KTEL. It is a microphone and speaker specifically designed for use with radios on motorcycles and similar vehicles. It features a volume adjustment function. There is one speaker. It suppresses noise and allows for clear audio transmission and reception. It is small and lightweight. Drilling holes in the helmet is required. *For more details, please feel free to contact our company.*

• others

●KTM006 (KTM-006) is a compact noise-canceling microphone kit for full-face helmets made by KTEL. ●It is a microphone and speaker specifically designed for use with radios on motorcycles and similar vehicles. ●It is a stereo type. ●There are two speakers. ●It features a new compact noise-canceling microphone. ●It comes with a volume adjustment function. ●It reduces noise and allows for clear audio transmission and reception. ●Drilling holes in the helmet is required. *For more details, please feel free to contact our company.*

• others

●KT007 (KT-007) is a 1-speaker set with volume adjustment made by KTEL. ●It is a speaker microphone specifically designed for jet-type helmets when using a radio on a motorcycle. ●It suppresses noise and allows for clear audio transmission and reception. ●It is compact and lightweight. ●It comes with a volume adjustment feature. ●There is one speaker. ●Drilling a hole in the helmet is required. *For more details, please feel free to contact our company.

• others

●KT008 (KT-008) is a 2-speaker set/monoral with volume adjustment made by KTEL. ●It is a speaker microphone specifically designed for jet-type helmets when using a radio on a motorcycle. ●It suppresses noise and allows for clear audio transmission and reception. ●It is compact and lightweight. ●It comes with a volume adjustment feature. ●There are two speakers. ●It is monoral. ●Drilling holes in the helmet is required. *For more details, please feel free to contact us.*

• others

●KT009 (KT-009) is a 2-speaker SET/stereo with volume adjustment made by KTEL. ●It is a microphone speaker specifically designed for jet-type helmets when using a radio on a motorcycle. ●It suppresses noise and allows for clear audio transmission and reception. ●It is compact and lightweight. ●It comes with a volume adjustment feature. ●There are two speakers. ●It is stereo. ●Drilling holes in the helmet is required. *For more details, please feel free to contact our company.

• others

●KTM007 (KTM-007) is a compact noiseless microphone kit for jet helmets made by KTEL. ●It is a microphone speaker specifically designed for full-face helmets when using a radio on a motorcycle or similar vehicles. ●It comes with a volume adjustment feature. ●There is one speaker. ●It suppresses noise and allows for clear audio transmission and reception. ●It uses a new type of small and lightweight microphone. ●Drilling holes in the helmet is required. *For more details, please feel free to contact our company.*

• others

●KTM009 (KTM-009) is a compact noise-free microphone kit for jet helmets made by KTEL. ●It is a microphone and speaker specifically designed for use with radios on motorcycles and similar vehicles. ●It is a stereo type. ●There are two speakers. ●It features a new compact noise-free microphone. ●It has a volume adjustment function. ●It suppresses noise, allowing for clear audio transmission and reception. ●Drilling holes in the helmet is required. *For more details, please feel free to contact us.*

• others

● The AN-23 (AN23) is a smartphone-specific ear-hook type earphone microphone made by F.R.C. ● It is designed for smartphones equipped with a φ3.5mm phone plug. It can be used with transceiver apps like LINE WORKS installed on your smartphone. ● The ear-hook design makes it less likely to fall out of your ear. ● There is a clip on the back of the lapel microphone. ● A short press of the PTT button starts transmission, and pressing it again returns to receiving. ● When a call comes in, pressing the PTT button answers the call, allowing for simultaneous conversation. Pressing it again ends the call. ● The PTT button can also control music apps. For example, play/pause is a short press, and skipping tracks is a double press. *For more details, please feel free to contact us.*

• others

The AN-24 (AN24) is a canal-type earphone microphone specifically designed for smartphones, manufactured by F.R.C. It is compatible with smartphones equipped with a φ3.5mm phone plug and can be used with transceiver apps like LINE WORKS installed on your smartphone. The canal type that fits inside the ear provides high sound insulation and a structure that is less likely to fall out of the ear. There is a clip on the back of the tie-pin microphone. A short press of the PTT button starts transmission, and pressing it again returns to reception. When a call comes in, pressing the PTT button answers the call, allowing for simultaneous conversation. Pressing it again ends the call. The PTT button can also be used to control music apps, for example: short press for play/pause, double press to skip tracks. *For more details, please feel free to contact us.

• others

The AN-26 (AN26) is a tie-pin type PTT microphone designed specifically for smartphones, manufactured by F.R.C. Since it is just the microphone, please use it in combination with separately sold φ2.5mm earphones. The recommended earphones from the manufacturer are as follows: - Inner type earphone FEP-201 - Ear hook earphone FEP-202 - Canal type earphone FEP-203 - D-type hook earphone FEP-204 - Ear pad hook type earphone FEP-205 - Ear hook speaker type earphone FEP-206 You can use it with a smartphone equipped with a φ3.5mm phone plug and installed with transceiver apps like LINE WORKS. There is a clip on the back of the tie-pin microphone. Pressing the PTT button briefly starts transmission, and pressing it again briefly returns to reception. When a call comes in, pressing the PTT button answers the call, allowing for simultaneous conversation. Pressing it again ends the call. The PTT button can also be used to control music apps, such as play/pause with a short press and skipping tracks with a double press. For more details, please feel free to contact us.

• others

The AP-26 (AP26) is a tie-pin type PTT microphone with a built-in battery, designed specifically for smartphones by F.R.C. Since it is just a microphone, please use it in combination with separately sold φ2.5mm earphones. The recommended earphones from the manufacturer are as follows: - Inner type earphone FEP-201 - Ear hook type earphone FEP-202 - Canal type earphone FEP-203 - D-type hook type earphone FEP-204 - Ear pad hook type earphone FEP-205 - Ear hook speaker type earphone FEP-206 You can use it with a smartphone equipped with a φ3.5mm phone plug and installed with transceiver apps like LINE WORKS. There is a clip on the back of the tie-pin microphone. *For more details, please feel free to contact us.

• others