エクセリ List of Products and Services

● AC201JA (AC-201-JA) is an AC/DC adapter made by waveCSR. ● It is used by attaching it to the specific low-power wireless telephone relay device R2000 made by waveCSR. ● By combining it with the USB-AC adapter AC150JA and USB cables ZD05001400 + FC50170020, you can supply power to the R2000 from a household power source of AC100V. ● It can be easily attached by sliding it sideways. *No mounting screws are required. 【Compatible Models】 Specific low-power wireless telephone relay device ・R2000 For extremely low-priced sales of earphone microphones, batteries, and more, please leave it to Excelli. *Please feel free to contact us for more details.

• others

The R2000 (R-2000) is a specific low-power wireless telephone relay device manufactured by wave CSR (formerly Lecuo Standard). It extends the communication range of specific low-power transceivers, making it easier to receive signals even in areas where radio waves typically have difficulty reaching. The theoretical coverage area is doubled. The relay device should be installed in a position where it can receive signals from transceivers located anywhere. Compatible devices include the wave CSR specific low-power transceiver fixed units B1500, GX100A, and portable unit P1500, among others. The antenna can be rotated 90 degrees vertically and 360 degrees horizontally. It can be installed horizontally or vertically mounted on a wall using brackets. There are 27 channels available. Power can be supplied in three ways: - By connecting the included USB-AC adapter AC150JA, USB cable ZD05001400 + FC50170020, and AC/DC adapter AC201JA to operate from a household AC100V outlet. - By using three AA alkaline batteries with the separately sold BT201JA. - By using the separately sold 201JA. For more details, please feel free to contact us.

• others
• Call device

● The SoftBank A201SJ is an IP radio manufactured by SoftBank. ● It can be used anywhere within the SoftBank 4G and 4G LTE areas. ● The major differences from the conventional model SoftBank 601SJ are as follows: - The A201SJ has a built-in LTE communication module, while the 601SJ does not. - The A201SJ supports Bluetooth devices, while the 601SJ does not. - The A201SJ supports Wi-Fi devices, while the 601SJ does not. ● It features a built-in LTE communication module, making it lighter and more space-efficient compared to the conventional model 601SJ. ● A communication antenna is not required. A GPS antenna (sold separately) is necessary. ● Bluetooth devices are supported. A cable-free Bluetooth microphone can be used. Pairing settings are required only for the first time. ● Wi-Fi devices are supported. For example, by connecting a dashcam in the car and consolidating communication through the A201SJ, it is possible to eliminate the communication costs for the dashcam, leading to reduced communication expenses. The same applies to devices other than dashcams. * For more details, please refer to the PDF document or feel free to contact us.

• others

●SCP-960Plus is a Bluetooth microphone made by SoftBank. ●It can be used with the SoftBank A201SJ vehicle-mounted IP radio. ●It connects to the A201SJ via Bluetooth, allowing for cable-free operation. ●Pairing settings for the SCP-960Plus and A201SJ are only required for the first time. From the second time onward, it will connect automatically. ●It has an IP55 dust and water resistance rating. *For details on waterproof, dustproof, and explosion-proof standards, click here. ●The built-in battery is lithium polymer. ●It functions as both a microphone and speaker. ●It features noise cancellation. ●It is easy to hold with one hand and allows for secure button operation. ●It can also be used with the IP radio app "Sky Transceiver." 【Compatible Models】 IP Radio GPS Location Management System ・SoftBank A201SJ For extremely low-priced sales of earphone microphones and batteries, leave it to Excelli. *For more details, please feel free to contact us.

• others

●SM11A1 (SM-11A1) is a handheld microphone made by Hytera. ●It is the standard microphone included with the DMR digital/analog general-purpose radio MD628. ●It has an IP54 rating for dust resistance and is water-resistant for everyday use. 【Compatible Models】 Digital general-purpose radio Analog general-purpose radio ・MD628 ※Standard configuration of the main unit For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• others

The MD628 (MD-628) is a vehicle-mounted DMR digital and analog general-purpose radio manufactured by Hytera. It is capable of acquiring GPS information and dynamic management. It can store and manage all communication history. It has voice recording capabilities. The transmission output ranges from 1W to 25W, used according to the output specified in the applied license. It has a channel capacity of TDMA2 multiplexing. TDMA is a time division operation mode. In digital mode, it allows for two complete communication lines at a frequency of 12.5kHz narrowband. By utilizing the external terminals (ports) on the front and rear of the MD628, third-party developed extensions can be added, significantly enhancing the effectiveness of the radio. It has obtained high durability standards of MIL-STD (U.S. military standards) MIL-STD-810 C/D/E/F/G. As a digital-analog / dual-mode DMR, it allows communication with existing analog general-purpose radios. In future digitalization, there is no need to replace the radio; only additional licensing costs will be incurred, preventing double investment. *For more details, please feel free to contact us.*

• others
• Call device

●CSM848 (CSM-848) is a stand microphone made by wave CSR (formerly Lecuo Standard). ●It can be connected to the base station CX848 of the communication system for work-related communication to transmit and receive audio. ●You can transmit audio by pressing the PTT button (transmit button) on the stand microphone. *The PTT button (transmit button) cannot be locked. ●It is a unidirectional microphone that picks up sound only from a specific direction, making it strong for use in noisy environments. ●It has a built-in speaker with a 0.5W output. The volume can be adjusted with a volume knob. ●It comes with an external speaker output terminal that can connect large speakers. ●The microphone head can be adjusted at a 180-degree angle. 【Compatible Models】 Multi-party simultaneous communication wireless system ・CX848 For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• others

●CSM150 (CSM-150) is a stand microphone made by wave CSR. ●It is a stand microphone for the base station of the wave CSR tabletop specific low-power transceiver B1500. ●You can transmit audio by pressing the press-to-talk button (transmit button) mounted on the stand microphone. ●The microphone head can be adjusted at a 180-degree angle. 【Compatible Models】 Specific low-power transceiver ・B1500 For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• others

● The B1500 is a specific low-power transceiver made by Wave CSR. ● It is a specific low-power transceiver that can be used when placed on a desk. ● It is convenient for use as a base station. ● You can connect the separately sold stand microphone CSM150 to the external PTT switch connection terminal to transmit audio. ● A high-output 600mW speaker that is easy to hear even in noisy environments. ● You can power it using the included AC adapter from a household power supply of AC100V. ● It can also operate on dry batteries. It runs for about 20 hours on four AA alkaline batteries. * This is an estimated time based on a usage ratio of transmission 1: reception 1: standby 8. ● It is equipped with various other features: - 38 patterns of tone squelch function - Two-stage microphone sensitivity switching function - Voice guidance function that informs you of channel settings and other statuses - VOX function that automatically switches to transmit mode when it detects audio * This function may not operate accurately, so we do not recommend using it. ● It comes with a one-year manufacturer’s warranty. ● You can extend the transmission range using the wireless relay device R2000. * For more details, please refer to the PDF document or feel free to contact us.

• others

●CSM520B (CSM-520-B) is a boom microphone made by wave CSR (formerly Lecuo Standard). ●It can be used with the wave CSR's R9020 base station for work communication and the vehicle-mounted specific low-power transceiver GX100. ●It is designed to not obstruct when mounted on the ceiling inside a crane. ●It is also optimal for operation with R9020 and GX100 as base stations. ●The base is magnet-based, allowing for easy installation. ●The microphone head can be adjusted in angle within a range of 180 degrees. ●It supports simultaneous communication. ●The microphone part comes with a windscreen cap, so wind noise is not a concern. ●With the base switch operation, you can easily turn the power ON/OFF and switch the microphone sensitivity between Hi/Low. Setting the microphone sensitivity to Hi makes it easier to pick up relatively quiet sounds, but it also picks up surrounding noise well, so if the ambient sound is loud, Low is recommended. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• others

●CSM510B (CSM-510B) is a stand microphone made by wave CSR. ●It can be used in combination with the wave CSR wireless system base unit R9020 and the vehicle-mounted specific low-power transceiver GX100, among others. ●The base is magnetically mounted, making it easy to install inside a vehicle. ●It is also optimal for use when operating R9020 and GX100 as base stations. ●The microphone head can be adjusted in angle within a range of 180 degrees. ●It supports simultaneous calls. ●The microphone part comes with a windscreen cap, so wind noise is not a concern. ●With the base switch operation, you can easily turn the power ON/OFF and switch the microphone sensitivity between Hi/Low. Setting the microphone sensitivity to Hi makes it easier to pick up relatively quiet sounds, but it also picks up more surrounding noise, so Low is recommended when ambient noise is high. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• others

●CSM530 (CSM-530) is a flexible microphone (with magnet) made by wave CSR. ●It can be used with vehicle-mounted specific low-power transceivers like the GX100. ●The base part is magnetic, making it easy to install on the ceiling of a crane's cabin. ●There is no PTT (push-to-talk) switch, so audio is continuously transmitted. You don't need to take your hands off the handle or controller each time you transmit. ●The microphone head can be adjusted to a 180-degree angle. For extremely low-priced sales of earphone microphones and batteries, leave it to Excelli. *For more details, please feel free to contact us.

• others

The TH-02-460ME (TH02460ME) is a neck-type throat microphone + earphone made by wave CSR (formerly Lecuo Standard). It is a set product that includes the throat microphone EM-01, waterproof PTT switch PB-11, and earphone (2.5φ) ME101/50CM. It can be used with standard and standard horizon commercial radios. The microphone and earphone can be separated. The PTT switch PB-11 has a 2.5φ earphone jack. It picks up throat vibrations and converts them into sound, allowing for clear voice transmission even in noisy environments. It enables communication under high noise levels of 110dB. It is excellent in waterproofing and durability. The sound quality is clear due to the ceramic piezoelectric element. It features a lightweight and compact vibration microphone case. It comes with an earhook-type earphone (2.5φ) ME101/50CM with an easy-to-replace two-terminal earphone unit. JAN code: 4580197836393. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. For more details, feel free to contact us.

• others

The EP401 IEO-L3.5 (EP401IEOL35) is an earphone/in-ear open type from Yaesu Musen (Standard Horizon). There are two colors available for the earphone: black and gray, which change the product model number. - Earphone (straight cable) in-ear open type (black): EP401 IEO-L3.5 (T50B) - Earphone (straight cable) in-ear open type (gray): EP401 IEO-L3.5 (T50G) - Earphone (coiled cable) in-ear open type (black): EP401 IEO-L3.5 (C50B) - Earphone (coiled cable) in-ear open type (gray): EP401 IEO-L3.5 (C50G) This earphone is designed for the Standard Horizon specific low-power transceiver SRFD10. It is a type that plugs directly into the radio body. The ear part is an open-air type and is simple in design. The size of the earphone jack is 3.5φ. The length of the microphone cable is approximately 50cm. It features a twisted pair earphone cable. *For more details, please feel free to contact us.

• others

The L0CBAY000247 (old model number RP-VC151) is a pin-type monaural microphone made by Panasonic. It is a monaural microphone used in connection with wireless guide systems such as the Panasonic guide system transmitters RD-M650AZ, RD-M650Z, RD-M750-D, and RD-M550Z. It features a high-sensitivity electret condenser microphone unit. Since it uses a plug-in power method, no power supply is needed for the microphone itself. It has a compact design weighing approximately 14g. The plug size is 3.5mm, and the cable length is about 1m. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. For more details, feel free to contact us.

• others

●BM-LTC20a (BMLTC20a) is a dedicated charger for 20 units made by Bear (without case). ●It can charge up to 20 units of Bear's wireless discussion system, including both the master and slave units, simultaneously. ●Being a case-less stationary type, it is more compact in size and easier to install compared to case-type chargers. ●It comes with a dedicated AC adapter BM-AC240, allowing it to be powered from a standard household AC100V outlet. ●The full charging time is approximately 6 hours. 【Compatible Models】 Multi-person simultaneous communication wireless system Wireless guide system ・BRIDGECOM LT-M ・BRIDGECOM LT-S *For more details, please feel free to contact us.

• others

The BM-LTC20b (BMLTC20b) is a dedicated charger for 20 units made by Bear (BEAR) (the contents shown in the image are for illustration purposes). It can charge up to 20 units of Bear's wireless discussion system, including both the main unit and subunits, simultaneously. The charger is housed in a sturdy aluminum case that is resistant to external shocks. It has a handle, allowing you to carry the wireless devices while they are stored in the case. You can also use the included shoulder strap to carry it without using your hands. For security against theft of the wireless devices, it comes with two locks for added peace of mind. A dedicated AC adapter, BM-AC240, is included, allowing it to be powered from a standard household AC 100V outlet. The full charging time is approximately 6 hours. 【Compatible Models】 Multi-party simultaneous communication wireless system Wireless guide system - BRIDGECOM LT-M - BRIDGECOM LT-S *For more details, please feel free to contact us.

• others

● The BM-GSC20 (BMGSC20) is a dedicated charger for 20 units made by Bear (BEAR). ● It can charge Bear's multi-audio guide system and radio receivers. ● Comes with a dedicated AC adapter, BM-AC240. ● It can charge up to 20 units simultaneously, and it works with just one AC100V outlet. ● It is integrated with an aluminum storage case that has a handle, making it very convenient to carry. ● The estimated charging time is 3 to 4 hours. ● The case includes storage pockets inside. 【Compatible Models】 Wireless Guide System - BM-GSR - BRIDGECOM GS-T Specific Low-Power Transceiver Receiver - BRIDGECOM R2 *For more details, please feel free to contact us.

• others

● B-A09 (BA09) is a carry case made by Bear for the X5. ● It can hold up to five Bear multi-person simultaneous communication systems. ● You can store earphone microphones and headsets in the space next to the main storage compartment. ● You can store the radio in the holder B-A02 while it remains inside the storage case. ● Compared to the previous carry case B-A04, it has become lighter with an aluminum case, thinner cushioning, and a larger storage space for accessories, and it is now lockable. ● The internal material of the case is made of urethane cushioning, which absorbs external shocks and protects the equipment inside securely. ● It is a lockable type with two packing locks, ensuring security. ● The case comes with an internal storage pocket. 【Compatible Models】 Wireless Guide System ・BRIDGECOM GS-T Multi-Person Simultaneous Communication Wireless System Wireless Guide System ・BRIDGECOM GS-X5 ・BRIDGECOM X5 * For more details, please feel free to contact us.

• others

● The EMS-81 (EMS81) is a guide-use unidirectional microphone manufactured by Alinco. ● It can be used with the Alinco specific low-power transceiver DJ-TX31. ● When the ON/OFF switch is set to ON, it locks in the transmission state. ● Due to its sharp directionality (unidirectional), pointing it towards the mouth reduces the pickup of unnecessary surrounding noise, allowing the voice to be captured clearly. * A directional microphone is one that picks up sound only from a specific direction. ● It features a compact and high-quality metallic body. The color is a subdued champagne gold. 【Compatible Models】 Specific low-power transceiver/wireless guide system ・DJ-TX31 For extremely low-priced sales of earphone microphones and batteries, leave it to Excelli. * For more details, please feel free to contact us.

• others

● The ST#7MIC-02 is a flexible microphone made by Tanizawa. ● It is used in conjunction with Tanizawa's wireless devices. ● Its magnetic design makes it ideal for installation on cranes or vehicles. ● The flexible microphone part is a long type, approximately 48 cm, allowing you to bring the microphone closer to your mouth. ● The connector part is a 3.5 mm plug type. 【Compatible Models】 Specific low-power transceivers / Multi-user simultaneous communication wireless systems - Echo Mate ST#717BX, ST#727M (Only compatible with ST#717BX) - Echo Mate ST#722B/LG (Only compatible with ST#722B) For extremely low-priced sales of earphone microphones and batteries, leave it to Excelli. * For more details, please feel free to contact us.

• others

●ST#7MIC-03 is a flexible microphone made by Tanizawa. ●It is a microphone for the Tanizawa multi-party simultaneous communication wireless system, specifically for the Echo Mate master unit ST#727BX. ●Designed with a magnetic base, it is easy to install on cranes or vehicles. ●The flexible microphone part is approximately (under investigation) cm long. It can be bent flexibly to bring the microphone closer to the mouth. ●The connector part is (under investigation). 【Compatible Models】 Specific low-power transceiver/multi-party simultaneous communication wireless system ・ST#727BX / ST#727M ※For master unit ST#727BX For extremely low-priced sales of earphone microphones and batteries, leave it to Excelli. ※For more details, please feel free to contact us.

• others

The B-A10ss (BA10ss) is a BRIDGECOM speaker (cigar socket specification) made by Bear (B-EAR). It is a speaker for the radios BRIDGECOM X5 (model number BM-X5), BRIDGECOM GS-X5 (model number BM-GSX5), BRIDGECOM X10 (model number BM-X10), BRIDGECOM X10 Compact (model number BM-X10CP), and BRIDGECOM X10 Athlete (model number BM-X10AT). Connect the radio unit and the speaker using the included audio cable B-F11. It is compatible with DC12V. Power can be taken from the cigarette lighter socket of DC12V vehicles such as passenger cars. *Since it does not support DC24V, a separately sold 24V converter B-A10ac24 is required for use in DC24V vehicles. The sound is louder than the previous model B-A07. An amplifier is built-in. It is possible to use an earphone microphone or headset connected to the radio unit simultaneously while an external speaker is connected (if the radio unit has two 3.5mm jacks). For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli.

• others

The B-A10ac (BA10ac) is a BRIDGECOM speaker (AC adapter version) made by Bear (B-EAR). It is a speaker for the BRIDGECOM X5 (model number BM-X5), BRIDGECOM GS-X5 (model number BM-GSX5), BRIDGECOM X10 (model number BM-X10), BRIDGECOM X10 Compact (model number BM-X10CP), and BRIDGECOM X10 Athlete (model number BM-X10AT). Connect the speaker to the main unit of the radio using the included audio cable B-F11. It operates on a household power supply of AC 100V. The sound is louder than the previous model B-A07. An amplifier is built-in. If the main unit of the radio has two 3.5mm terminals, you can also use an earphone microphone or headset while an external speaker is connected. You can also attach it to a car or other surfaces using the separately sold speaker-specific magnet B-F10. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli.

• others

●FLM-02 (FLM02) is a flexible microphone made by EKO TECHNO. ●It is a microphone for radios. ●It uses a unidirectional microphone, making it suitable for use in noisy environments. * A unidirectional microphone is one that picks up sound only from a specific direction. ●The arm of the microphone can be bent freely. ●You can also attach a magnet to the PTT section as an option. For extremely low prices on earphone microphones and batteries, leave it to Excelli. For extremely low prices on earphone microphones and batteries, leave it to Excelli.

• others

● The EDC-320R (EDC320R) is a twin charging stand manufactured by Alinco. ● When combined with the separately sold AC adapter EDC-122, it can charge two lithium-ion batteries EBP-108 simultaneously. ● By using the included connecting cable UX1599, the EDC-320R can be linked together up to three units, allowing for the simultaneous charging of up to six battery packs. ● It can fully charge the EBP-108 in approximately 7 hours. ● The linking of EDC-320R requires no tools and can be easily connected. ● It can be powered from a household AC 100V power supply. ● The charging status can be easily understood by the color of the charging lamp: - Green: Charging complete - Orange: Charging in progress 【Compatible Models】 Specific low-power transceivers - DJ-PHM20 (to be used in combination with AC adapter EDC-122) *For more details, please feel free to contact us.

• others

The FC-ZXPROBC (FCZXPROBC) is a charger stand manufactured by F.R.C. It can be used as an official charging stand specifically for the FC-ZXPRO low-power transceiver. This charger stand is included in the standard configuration of the FC-ZXPRO main unit. It allows for stable charging by enabling the main unit to be set upright. Charging is done by combining an AC adapter and a USB cable. By combining it with the following accessories included in the standard configuration of the FC-ZXPRO main unit, charging from a household power source (AC100V) is possible. AC Adapter: FC-ZXPROAC USB Cable: FC-ZXPROUSB It charges the built-in nickel-metal hydride battery. It charges the nickel-metal hydride battery FC-BT01 stored in the FC-ZXPRO main unit. *For more details, please feel free to contact us.

• others

●EDC-311R (EDC311R) is a single charger stand manufactured by Alinco. ●When combined with the separately sold AC adapter EDC-287, it can charge specific low-power transceivers made by Alinco. ●With one AC adapter EDC-287, you can connect up to four charging stands EDC-311R using the included linking cable for charging. ●It can fully charge a nickel-metal hydride battery EBP-179 in about 6 hours. ●The battery can be charged either on its own or while attached to the charger. ●It can be powered from a household AC 100V power source. 【Compatible Models】 Specific low-power transceivers ・DJ-P321 *Used in combination with EDC-287 ・DJ-P322 *Used in combination with EDC-287 *For more details, please feel free to contact us.

• others

●EDC-311A (EDC311A) is a single charger set manufactured by Alinco. ●It can charge specific low-power transceivers made by Alinco. ●This single charger set includes the single charging stand EDC-311R and the charging adapter EDC-287. *Please note that a connecting cable is not included. ●If you plan to use it in conjunction, please purchase the charging stand EDC-311R. ●It can fully charge the nickel-hydride battery EBP-179 in about 6 hours. ●The battery can be charged either alone or while mounted on the charger. ●It can be powered from a household AC100V power source. ●The length of the AC cable is approximately 1.8m. 【Compatible Models】 Specific low-power transceivers ・DJ-P321 ・DJ-P322 *For more details, please feel free to contact us.

• others

●EDC-300K (EDC300K) is a charging set manufactured by Alinco. ●It is a product that includes the AC adapter EDC-300 for charging and the DC cable UA0105. ●By combining the EDC-300K with the 10-port rapid charger EDC-296, you can charge up to 10 units of the Alinco specific low-power transceiver DJ-PX10 simultaneously. ●When combined with the separately sold charging stand EDC-308R, you can charge up to 4 units of the Alinco models EMS-87B, EMS-87W, EMS-87BNC, and DLS-01 simultaneously. ●When combined with the separately sold linking charging set EDC-295R, you can charge up to 4 units of EME-80WMA and EME-80BMA simultaneously in about 2 hours. ●It can be powered from a household AC 100V power source. ●The cable length is approximately 115 cm. 【Compatible Models】 Specific low-power transceiver ・DJ-PX10 Loudspeaker ・DLS-01 *For more details, please feel free to contact us.

• others

●EDC-296 (EDC296) is a 10-port rapid charger manufactured by Alinco. ●It is a rapid charger that can charge up to 10 Alinco wireless earphone microphones (EME-80BMA) simultaneously. ●It can be used with the separately sold charging set EDC-300K (which includes the charging AC adapter EDC-300 and charging cable UA0105) with a household AC 100V power supply. ●Charging is easy; just plug the wireless earphone microphone into the charging port. ●The charging time is approximately 2 hours. ●It is compact and elongated, allowing for installation without taking up much space. 【Compatible Models】 Specific low-power transceiver ・DJ-PX10 *For more details, please feel free to contact us.

• others

●EDC-295R (EDC295R) is a connection charging set made by Alinco. ●EDC-295R is a set product that includes the charging stand EDC-295 and the connection cable UX1615S. ●When combined with Alinco's single charger set EDC-295A, it can charge up to four devices simultaneously, such as the wireless earphone microphone EME-80BMA and the specific low-power transceiver DJ-PX10. ●Please purchase EDC-295R as an expansion charging station for EDC-295A (which comes with charging cable EDS-37 and EDC-300). ●EDC-295R can be easily used by simply connecting it to EDC-295A with the included connection cable. ●The product that comes with the charging USB cable UX1647 is the charging stand EDC-295A. ●The charging terminal is microUSB. ●The charging times are as follows: ・EME-80BMA: approximately 2 hours ・EME-80WMA: approximately 2 hours ・DJ-PX10: approximately 2 hours *For more details, please feel free to contact us.

• others

● The EDC-280 (EDC280) is a single charging stand made by Alinco. ● It is used for charging Alinco's digital simple radios and small area radios. ● Please use it in combination with a separately sold AC adapter. ・ Dedicated AC adapter EDC-222 for DJ-BS10 ・ Dedicated AC adapter EDC-239 for DJ-DP10 ● It can charge both the battery alone and when the radio is equipped. ● It has an LED lamp that allows you to check the charging status. ● Charging time reference: ・ Lithium-ion battery pack (1000mA) EBP-177: 2.5 hours ・ Lithium-ion battery pack (1800mAh) EBP-178: 4 hours * For more details, please feel free to contact us.

• others

●EDC-277R (EDC277R) is a twin charger stand manufactured by Alinco. ●It is a twin charger stand that can be used with digital simple radios and small area radios. ●An AC adapter sold separately is required. 1. Large AC adapter for connected charging EDC-162 or AC adapter for twin charger stand EDC-262 *Up to 4 EDC-277R units can be connected. 2. Small AC adapter EDC-222 *Can be used as a single charger. ●Charging is possible in both states: with the battery alone or with the radio equipped. *For more details, please feel free to contact us.

• others

The AP-9600 (AP9600) is a wireless access point manufactured by Icom. It is used to connect Icom WLAN transceivers IP100H (discontinued), IP110H, and remote communicator IP100FS to a network via wireless LAN. Compared to the previous model AP-9500#01, it has the following advantages: - Compliance with Wi-Fi 6 (IEEE802.11ax) enables ultra-fast communication at 2.4Gbps. - Supports the robust security standard WPA3. The latest Wi-Fi 6 (IEEE802.11ax) standard allows for ultra-fast communication at 2402Mbps (theoretical value at 80MHz). It supports dual-band with 20 channels in the 5GHz band (W52/W53/W56) and 13 channels in the 2.4GHz band. The 5GHz band includes channel 144, allowing for smooth communication by avoiding congested channels and enabling interference-free communication. *According to radio wave regulations, W52/W53 channels can only be used indoors, while W56 channels can be used outdoors. *For more details, please refer to the PDF document or feel free to contact us.

• others

●EDC-207A (EDC207A) is a single charger set manufactured by Alinco. ●It charges the Alinco specific low-power transceiver DJ-PX5. ●This is a value set product that includes the single connection charging stand EDC-207R and the dedicated AC adapter EDC-287. ●It can charge the built-in Li-Ion battery of the DJ-PX5. ●Equipped with an LED lamp that allows easy confirmation of the charging status. ●Charging time estimate: 3 hours 【Compatible Models】 Specific low-power transceivers ・DJ-PX5 ・DJ-PX7 *For more details, please feel free to contact us.

• others

●EDC-196R (EDC196R) is a single connection charging stand made by Alinco. ●It can charge Alinco's digital simple radios. ●When used as a single charger, a separate AC adapter for single use, EDC-283, is required. ●When used as a connected charger, a separate AC adapter for connected chargers, EDC-175, is required. *Up to 6 EDC-196R units can be connected together for use. ●You can charge either the radio units or just the batteries. ●Approximate charging times: - EBP-81: about 5 hours - EBP-82: about 3.5 hours - EBP-89: about 6 hours ●Equipped with an LED lamp that allows you to check the charging status. 【Compatible Models】 Digital Simple Radio Registered Stations - DJ-DP50H - DJ-DP50HB Digital Simple Radio Licensed Stations / Analog Simple Business Radios - DJ-BU50AD *For more details, please feel free to contact us.

• others

● The EDC-186R (EDC186R) is a twin charging stand made by Alinco. ● It can charge specific low-power transceivers from Alinco, such as the DJ-PX31, DJ-TX31, DJ-RX31, DJ-PX3, and DJ-RX3. ● An AC adapter sold separately is required for charging. - Up to 5 EDC-186R units can be linked to charge 10 transceivers: Twin connection charging AC adapter EDC-162 - One EDC-186R can be used as a single charger to charge 2 transceivers: Single charging compact AC adapter EDC-139 ● The charging status can be easily identified by the color of the LED lamps: - Red: Charging - Green: Complete - Green blinking: Discharging ● Estimated charging time: Approximately 6 hours ● Charging is possible in both battery-only and radio-equipped states. ● Equipped with a battery refresh button to eliminate memory effect and prolong battery life. *For more details, please feel free to contact us.

• others

●EDC-186A (EDC186A) is a twin charger set manufactured by Alinco. ●EDC-186A is a set product that includes the twin charging stand EDC-186R and the dedicated AC adapter EDC-139 (not connectable). *EDC-186A is the model number that combines EDC-186R and EDC-139. ●It can charge specific low-power transceivers made by Alinco. ●The charging status can be easily identified by the color of the following LED lamps: - Red light: Charging - Green light: Complete - Green blinking: Discharging ●It can charge in both states: with the battery alone or with the transceiver attached. ●Equipped with a battery refresh button to eliminate memory effect and prolong battery life. *For more details, please feel free to contact us.

• others

● The EDC-185A (EDC185A) is a single charger set manufactured by Alinco. ● It can charge specific low-power transceivers such as DJ-PX31, DJ-TX31, DJ-RX31, DJ-PX3, and DJ-RX3. ● A compact AC adapter, EDC-139, is included as standard. ● It charges the nickel-metal hydride battery EBP-179 in approximately 6 hours. ● It can charge in both battery-only and transceiver-equipped states. ● It features a battery refresh button to eliminate the memory effect of nickel-metal hydride batteries and prolong battery life. *For more details, please feel free to contact us.*

• others

●EDC-184A (EDC184A) is a single rapid charger set manufactured by Alinco. ●The AC adapter EDC-139 is also included as a standard set. ●It can charge the lithium-ion battery pack EBP-70 when set in specific low-power transceivers made by Alinco, as well as charge the EBP-70 alone. ●Approximate charging time: about 2.5 hours. *When charging the lithium-ion battery pack EBP-70. ●Equipped with an LED lamp to check the charging status. ・Green: Charging complete ・Red: Charging *For more details, please feel free to contact our company.

• others

●EDC-181A (EDC181A) is a single charger set manufactured by Alinco. ●It can charge the specific low-power transceivers compatible with Alinco listed below. ●It comes standard with the AC adapter EDC-139. ●It can charge both the nickel-hydride battery EBP-179 alone and when equipped with a transceiver. ●It features a refresh function to prevent memory effect. ●The charging status can be easily checked with the following LED lamp indications: - Red light: Charging - Green light: Charging complete - Green blinking: Discharging *For more details, please feel free to contact us.

• others

●EDC-182 (EDC182) is a charging stand manufactured by Alinco. ●It is a dedicated charging stand that can charge specific low-power transceivers from Alinco, such as DJ-CH20, DJ-CH27, DJ-CH201, DJ-CH271, DJ-CH202, and DJ-CH272. ●It can charge both the battery alone and when the transceiver is equipped. ●Approximate charging time: about 3 hours *When charging the lithium-ion battery pack EBP-80 *For more details, please feel free to contact us.

• others

The EDC-180A (EDC180A) is a single charger set manufactured by Alinco. It is a charger set that can charge the specific low-power transceiver DJ-P45 from Alinco. It comes with a dedicated AC adapter EDC-122. It is a single charger that can charge one transceiver. The approximate charging times are as follows: - EBP-77: about 2.5 hours - EBP-78: about 4 hours *For more details, please feel free to contact us.

• others

The EDC-158R (EDC158R) is a charging stand for connecting multiple units manufactured by Alinco. It can charge up to two transceivers at once. By combining it with the large AC adapter EDC-162, you can connect up to four EDC-158R units (equivalent to eight transceivers) for charging. The approximate charging time is as follows: Lithium-ion battery pack EBP-70: about 2.5 hours. *For more details, please feel free to contact us.

• others