エクセリ List of Products and Services

● LC-196 (LC196) is a hard case made by Icom (ICOM). ● It can store the Icom simultaneous communication type specific low-power transceiver IC-5020. ● It prevents damage to the screen and body of the radio when dropped. ● It has a D-ring, so you can use the separately sold long shoulder strap (carrying strap) MB-57L to carry the radio over your shoulder. ● You can operate the front and side parts of the radio while the LC-196 is attached. ● You can charge the radio while it is stored in the hard case by removing the snap button on the bottom of the LC-196. For extremely low-priced sales of earphone microphones, batteries, and more, leave it to Excelli. *For more details, please feel free to contact us.

• others

The EP501 IEF-L3.5 (EP501IEFL35) is an in-ear fit type earphone from Yaesu Musen (Standard Horizon). The earphones are available in two colors: black and gray, which change the product model number. - In-ear fit type earphone (straight cable) (black): EP501 IEF-L3.5 (T50B) - In-ear fit type earphone (straight cable) (gray): EP501 IEF-L3.5 (T50G) - In-ear fit type earphone (coiled cable) (black): EP501 IEF-L3.5 (C50B) - In-ear fit type earphone (coiled cable) (gray): EP501 IEF-L3.5 (C50G) These earphones are designed for the Standard Horizon specific low-power transceiver SRFD10. They are of the type that plugs directly into the radio unit. The ear part is canal-type, providing a good fit and strong performance in noisy environments. The size of the earphone jack is 3.5mm. The length of the microphone cable is approximately 50cm. It features a twisted pair earphone cable. *For more details, please feel free to contact us.*

• others

● HM-249 (HM249) is a hands-free microphone for vehicles manufactured by Icom (ICOM). ● It is a hands-free microphone & PTT for Icom's vehicle-mounted IP radios IP500M, IP501M, UHF band digital and analog vehicle-mounted general-purpose radios IC-DU6010S1, IC-DU6010S2, IC-DU6010S3, VHF band digital and analog vehicle-mounted general-purpose radios IC-DV6010S1, and amateur radio equipment ID-5100, ID-4100, IC-2730. ● It is used for operating radios inside vehicles. ● It consists of a large PTT button with an RJ-45 plug cable, a microphone cable, and a remote PTT button cable (the second image shows an installation example). ● By pressing the PTT button, you can switch between transmit and receive modes. While holding down the remote PTT button, you can maintain the transmission state. The large PTT button lights up with an LED during transmission. ● After connecting to the radio, if you need to adjust the volume of the HM-249, you can adjust the output level on the back of the PTT button with a screwdriver. *For more details, please feel free to contact us.

• others

● The HS-92 is a helmet-mounted microphone made by Icom (with a crocodile clip for mounting). ● It is a helmet-mounted microphone that can be attached to commercial helmets. ● The mounting clip is a crocodile clip, making it easy to attach to the helmet. *Note: It may not be possible to attach it to some helmets with wide brims. ● By using the dedicated connection cable with built-in talk switch OPC-636, hands-free communication is possible. ● The microphone section comes with a windscreen cap to prevent wind noise. ● To use the HS-92, a separately sold dedicated earphone (plug diameter 2.5Φ, impedance 8.5Ω) such as EH-11, EH-12, EH-13, or EH-14 and a connection cable to connect to the radio unit are required. *Note: The optional items used may vary depending on the radio or transceiver. ● In addition to the compatible models listed below, it can also be used with IC-4055 (when used in combination with earphones and OPC-636 or OPC-661) and IC-4066 (when used in combination with earphones and OPC-636 or OPC-661). For extremely low-priced sales of earphone microphones and batteries, leave it to Excelli. *For more details, please feel free to contact us.

• others

The HX827 (HX-827) is a hybrid transceiver for specific low-power and work communication manufactured by wave CSR. It is a hands-free simultaneous communication type radio. It is a 2-in-1 hybrid transceiver capable of 1:1 simultaneous communication (duplex), 5-party simultaneous communication (duplex), and specific low-power alternating communication (simplex). *For 5-party communication, the R9020 is required. The methods for simultaneous communication are as follows: 1) Simultaneous communication with 2 units: This is the common usage method with two HX827 units. 2) Simultaneous communication with 3 units: Using three HX827 units, one of which operates in parent mode, allowing for a maximum of 3-party simultaneous communication with 1 parent unit and 2 child units. 3) Simultaneous communication with 5 units: With one dedicated parent unit R9020 and four HX827 units, allowing for a maximum of 5-party simultaneous communication. There are no restrictions on continuous communication time at an output of 1mW. At an output of 10mW, the communication distance increases, but the continuous communication time is 3 minutes (it disconnects and reconnects immediately). *For work communication, it cannot be set to 10mW. *For more details, please refer to the PDF document or feel free to contact us.

• others

●CBP825LI (CBP-825-LI) is a lithium-ion battery pack manufactured by wave CSR. ●It is the rechargeable battery for the standard configuration of the specific low-power hybrid transceiver HX827 used for work communication. ●The battery capacity is 3.6V/1900mAh. ●It can operate the HX827 for approximately 20 hours at maximum. ●It can be charged using the connection charging adapter CSA585 and CAA1283FA or the standalone charger adapter CAA1210FC. 【Compatible Models】 Specific low-power hybrid transceiver ・HX827 ※Standard configuration of the main unit For extremely low-priced sales of earphone microphones and batteries, leave it to Excelli. *For more details, please feel free to contact us.

• others

●CBT825 (CBT-825) is a dry battery case made by wave CSR. ●It is for the specific low-power, simultaneous communication hybrid transceiver HX827. ●The HX827 can operate for up to 25 hours using commercially available AA alkaline batteries. ●It uses 3 AA alkaline batteries. 【Compatible Models】 Specific low-power, simultaneous communication hybrid transceiver ・HX827 【Features】 ■Uses 3 AA alkaline batteries ■Can be used as a backup power source For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• others

●CTM825 (CTM-825) is a tie-pin type earphone microphone (simple type) made by wave CSR. ●It is an earphone microphone for the hybrid transceiver HX827, designed for specific low-power and work communication simultaneous calls. ●This simple type earphone microphone comes with a 2.5mm earphone attached to the tie-pin microphone. The earphone part can be removed. ●The tip of the earphone has a replaceable ear rubber. ●The length of the microphone cable is 70cm, and the length of the earphone cable is 38cm. ●There is a clip on the microphone cable that allows it to be attached to clothing. ●It can transmit and receive with the HX827. ●It supports both simultaneous communication (duplex) and alternating communication (simplex). 【Compatible Models】 Specific low-power and work communication hybrid transceiver ・HX827 For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• others

●CTM827 (CTM-827) is a tie-pin type earphone microphone (standard type) made by wave CSR. ●It is an earphone microphone for the specific low-power, work communication simultaneous talk hybrid transceiver HX827. ●This earphone microphone comes with a tie-pin microphone and an earphone (2.5φ). The earphone part is detachable. ●The tip of the earphone has a removable ear rubber. ●The cable length is 73cm for the microphone cable and 50cm for the earphone cable. ●It can transmit and receive with the HX827. ●It supports both simultaneous talk (duplex) and alternating talk (simplex). 【Compatible Models】 Specific low-power, work communication hybrid transceiver ・HX827 For extremely low-priced sales of earphone microphones, batteries, and more, leave it to Excelli. *For more details, please feel free to contact us.

• others

●CHP825 (CHP-825) is a headset made by wave CSR. ●It is a headset for the specific low-power, work communication simultaneous talk hybrid transceiver HX827. ●It is a type of headset that can be mounted on a helmet. ●It comes with a detachable earphone (2.5φ). The earphone cable length is approximately 20 cm. ●The microphone is a boom mic that can be flexibly bent. ●It can transmit and receive with the HX827. You speak into the boom mic and listen through the earphone. ●It supports both simultaneous talk (duplex) and alternating talk (simplex). 【Compatible Models】 Specific low-power, work communication hybrid transceiver ・HX827 For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• others

●CME825 (CME-825) is a body-mounted earphone microphone made by Wave CSR. ●It is an earphone microphone for the specific low-power, work communication simultaneous talk hybrid transceiver HX827. ●It can be attached to the HX827 body for transmitting and receiving. ●The connector part attached to the HX827 body serves as the microphone, and a detachable earphone is included. ●It supports both simultaneous talk (duplex) and alternating talk (simplex). 【Compatible Models】 Specific low-power, work communication hybrid transceiver ・HX827 For unbeatable prices on earphone microphones, batteries, and more, trust Exceli. *For more details, please feel free to contact us.

• others

● CSA585 (CSA-585) is a rapid charger manufactured by wave CSR. ● It can charge the lithium-ion battery CBP585LI, which is attached to the digital simple radio made by wave CSR, in about 3 hours. ● It can also charge the lithium-ion battery pack CBP825LI. ● Up to 6 CSA585 units can be linked together, allowing for simultaneous charging of up to 6 radios. ● Please use it in combination with the following separately sold AC adapters: - Linking charger adapter CAA1283FA - Standalone charger adapter CAA1210FC 【Compatible Models】 Digital simple radio registered stations / Analog and digital general business radios / Analog and digital simple radio licensed stations - HX585 Specific low-power and work communication hybrid transceiver - HX827 For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. * For more details, please feel free to contact us.

• others

The SK201JA (SK-201-JA) is a headset speaker manufactured by wave CSR. It is a headset speaker that can be used with a specific low-power transceiver for work communication wireless systems. It is designed to be used in combination with the separately sold headset HP201JA. It can be attached to either the left or right ear. The speaker pad covers the ear, making it usable even in noisy environments. 【Compatible Models】 Specific low-power hybrid transceiver for work communication - HX827 Multi-party simultaneous communication wireless system - P9010 Specific low-power transceiver - P2010 For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• others

The GX850 (GX-850) is a vehicle-mounted digital radio receiver for fire and emergency services manufactured by wave CSR. It is a portable receiver that complies with the common specifications for digital fire and emergency radio, operating in the 260MHz/270MHz SCPC band, allowing you to listen to digital fire radio. The frequencies that can be received are limited to a single wave preset by the manufacturer in advance. It features a variety of scanning functions tailored to different applications. The built-in 2W speaker and external output 5W amplifier provide loud volume that is easy to hear even in noisy environments. Additionally, the external output can be set to a maximum output of 10W. The volume for the built-in speaker and external output can be adjusted separately. The LCD display is a full dot matrix that is easy to read. It can be configured for up to 128 channels (64 pairs), and selection is easy with a rotary selector. The startup restriction feature allows for locking with a password. The power supply is compatible with DC12V and DC24V. When installed in a 24V vehicle, a DC-DC converter (such as ADC-10) is not required. It is lightweight and compact, made from durable aluminum die-cast material. *For more details, please refer to the PDF materials or feel free to contact us.

• others

The AX850 (AX-850) is a portable digital radio receiver for fire and emergency services manufactured by wave CSR. It is a portable receiver that complies with the common specifications for digital fire and emergency radio, operating in the 260MHz/270MHz SCPC band, allowing you to listen to digital fire radio. The frequencies that can be received are limited to a single wave pre-set by the manufacturer. It supports various scan settings and is easy to use, allowing for simple channel selection with a rotary selector. It can be configured for up to 128 channels/64 pairs. Startup restrictions can be implemented with a password lock. It meets the IP67 dust and waterproof standards, and even when the antenna and battery are removed from the main unit, it still complies with IP67. In addition to the dedicated option connector on the side, it has a φ3.5mm headphone jack, allowing you to connect the separately sold EP850 headphones directly to the radio unit. The unit features a lightweight and compact casing made from durable aluminum die-cast material. When using the lithium-ion battery pack CBP501LI, the separately sold carrying case LC850 can be utilized. *For more details, please refer to the PDF document or feel free to contact us.*

• others

The C850ZD (C-850-ZD) is a digital radio receiver for fire and emergency services manufactured by Wave CSR. It is a portable receiver that complies with the common specifications for fire and emergency digital radios, operating in the 260MHz/270MHz band using SCPC method. It features a large-diameter speaker with a diameter of 57mm, making it easy to hear audio. It can store up to 100 channels in memory. It is capable of scanning designated channels. It can be powered by a household AC power supply of 100V (when using an AC adapter), DC 12V, DC 24V, or eight AA alkaline batteries. When using eight AA alkaline batteries, it can operate for approximately 7 hours, based on a usage ratio of 1 hour of receiving to 9 hours of standby. The operation is intuitive and easy, as you only need to turn on the power and adjust the volume and channel. Channel switching is simple with a rotary switch. The LED display is easy to read, with red for power, green for talking, and orange for scanning. The antenna connector on the radio side is MJ. For more details, please refer to the PDF document or feel free to contact us.

• others

The BTEK-D01 set is a wireless earphone microphone made by Ecotechnos. It is a product that combines the BT dongle BTEK-D01 and the BT headset K10C. It can be used with standard, Icom, Motorola, and JVC Kenwood commercial radios. It can transmit and receive. When transmitting, press the PTT button on either the dongle or the radio to speak. The dongle is connected to the radio via a cable, but the headset is wireless. The dongle can be powered directly from the radio, allowing for easy operation without the need for charging. The K10C headset can be used for about 10 hours on a single charge using the included USB cable. Since it allows for cable-free and hands-free calls, it helps prevent accidents caused by cable snags and tangles, and enables conversations without using both hands. It features a large PTT switch that is easy to press even with gloved hands. For extremely low prices on earphone microphones, batteries, and more, trust Excelli. For more details, please feel free to contact us.

• others

In cave exploration, coordination between above ground and underground is essential for ensuring safety. Particularly, communication in darkness and tight spaces is crucial for reducing the risk of accidents. The BbTALKIN MS, which allows for clear voice communication and simultaneous calls with up to six people, facilitates smooth communication between guides and expedition members, supporting safe exploration. 【Usage Scenarios】 - Information sharing between guides and team members inside the cave - Communication between above ground and underground - Rapid coordination in emergencies 【Benefits of Implementation】 - Accurate information transmission with clear audio - Efficient coordination with simultaneous calls for up to six people - Use in harsh environments due to IPX8 waterproof and dustproof performance - Improved safety

• others

In archaeological survey sites, rapid and accurate information transmission among surveyors is essential. Especially in underground or complex locations, clear voice communication greatly affects the efficiency and safety of the survey. Traditional radios have issues such as poor signal reception and high noise levels. BbTALKIN MS was developed to address these challenges. 【Usage Scenarios】 - Excavation surveys of underground ruins - Surveys within caves - Underwater archaeological investigations - Instructions and communication from remote locations 【Benefits of Implementation】 - Enables accurate information transmission with clear audio - Hands-free calling allows for free use of both hands, increasing work efficiency - Supports simultaneous calls for up to 6 people, enhancing team collaboration - IPX8 waterproof and dustproof performance ensures reliability in harsh environments

• others

In the detective industry, tracking subjects requires rapid and accurate information transmission. Particularly in situations such as tailing or surveillance, coordination among team members can determine the success or failure of an investigation. Clear audio simultaneous communication enables situational awareness and precise instructions, significantly improving the efficiency of investigations. BbTALKIN MS allows simultaneous communication for up to six people, strongly supporting collaboration in the field. 【Usage Scenarios】 - Team coordination during tailing - Information sharing during surveillance - Communication in underground parking lots or within buildings 【Benefits of Implementation】 - Rapid response through real-time information sharing - Accurate instruction transmission via clear audio - Enhanced mobility through hands-free communication

• others

In the broadcasting industry, smooth information transmission is essential. Especially when working in different locations, such as above ground and underground, clear audio communication is required. If simultaneous communication with clear audio is not possible, delays or misunderstandings in information transmission may occur, potentially hindering the progress of the broadcast. BbTALKIN MS enables simultaneous communication for up to six people, facilitating smooth information sharing with clear audio. 【Usage Scenarios】 - Coordination among staff at the broadcast site - Audio communication in underground parking lots or tunnels - Setup and teardown work at event venues 【Benefits of Implementation】 - Accurate information transmission with clear audio - Improved work efficiency with hands-free communication - Smooth coordination with simultaneous communication for up to six people

• others

In event security, rapid and accurate information transmission is essential. Particularly in large venues or places like underground parking lots where radio communication is difficult, coordination becomes crucial. If simultaneous calls cannot be made with clear audio, there may be delays in ensuring the safety of security personnel and responding to emergencies. BbTALKIN MS connects above and below ground, enabling simultaneous calls for up to six people, contributing to the efficiency and safety of event security. 【Usage Scenarios】 - Security for the entire event venue - Security in underground parking lots - Coordination among staff 【Benefits of Implementation】 - Enables rapid information transmission with clear audio - Smooth coordination with simultaneous calls for up to six people - Peace of mind for outdoor use with IPX8 waterproof and IP6X dustproof performance

• others

In subway operations, rapid and accurate information transmission between above ground and underground is essential. In particular, clear voice communication is required for operation management, maintenance work, and emergency responses. Traditional radios have faced challenges in communicating in the complex underground environment and in facilitating simultaneous calls among multiple users. BbTALKIN MS addresses these issues and supports the safe and efficient operation of subways. 【Usage Scenarios】 * Communication between the operations control room and field workers * Coordination during maintenance and inspection work * Information sharing in emergencies 【Benefits of Implementation】 * Enables accurate information transmission with clear voice quality * Quick coordination through simultaneous calls with up to 6 people * High durability with IPX8 waterproof and IP6X dustproof performance

• others

At tunnel construction sites, swift and reliable communication between above ground and underground is essential. Clear voice simultaneous calls are required to ensure safety and efficient collaboration during work. Traditional communication methods are prone to interruptions and delays, which can lead to decreased work efficiency and, in some cases, safety risks. BbTALKIN MS connects above ground and underground, enabling simultaneous calls for up to six people and addressing communication challenges in tunnel construction. 【Usage Scenarios】 - Communication between above ground and underground during tunnel excavation work - Instruction transmission during material delivery - Information sharing for safety management - Rapid response in emergencies 【Benefits of Implementation】 - Accurate information transmission with clear voice - Improved work efficiency through hands-free calls - Smooth collaboration with simultaneous calls for up to six people - Usability in harsh environments due to IPX8 waterproof and IP6X dustproof performance

• others

In the mining industry, collaboration between underground and surface operations is essential, and rapid and accurate information transmission is required to ensure the safety of workers. Especially in emergencies such as collapses or gas leaks, real-time information sharing becomes crucial. Traditional radios have had issues with poor signal penetration deep underground or excessive noise. BbTALKIN MS connects surface and underground operations, enabling simultaneous communication for up to six people and achieving smooth communication with clear audio. 【Usage Scenarios】 - Communication between underground workers and surface managers - Rapid information sharing in emergencies - Confirmation of work instructions and progress - Safety management and risk avoidance 【Benefits of Implementation】 - Improved work efficiency - Enhanced safety - Strengthened emergency response capabilities - Reduced communication costs

• others

In police search operations, rapid and accurate information transmission is essential. Particularly in searches conducted in underground or complex locations, clear audio communication significantly affects the efficiency of the search. Traditional radios have faced challenges such as difficulty in reaching areas with poor signal and the inability to facilitate simultaneous conversations among multiple users. BbTALKIN MS addresses these issues and provides strong support for search activities. 【Usage Scenarios】 - Searches in underground facilities - Searches within buildings - Searches in mountainous areas - Nighttime searches - Search operations requiring coordination 【Benefits of Implementation】 - Enables simultaneous conversations among up to six people, facilitating smooth information sharing - Achieves accurate information transmission with clear audio - IPX8 waterproof and IP6X dustproof performance allows use in harsh environments - Supports searches over a wide area with a communication range of up to 300 meters - Hands-free communication allows users to keep both hands free

• others

In firefighting scenarios, rapid and accurate communication of instructions is essential. Especially in places like buildings and underground areas where radio communication is difficult, coordination is crucial for the safety of team members and the efficiency of rescue operations. Clear voice communication and reliable information sharing are required. BbTALKIN MS allows for simultaneous communication with up to six people, facilitating smooth instruction transmission in firefighting activities by connecting above ground and below. 【Usage Scenarios】 - Firefighting activities inside buildings - Rescue operations underground - Coordination between the command center and field personnel 【Benefits of Implementation】 - Accurate decision-making through rapid information sharing - Ensuring the safety of team members - Improving the efficiency of rescue operations

• others

In the construction industry, quick and reliable communication among workers on the ground, underground, or in remote locations is essential. Especially in complex structures and environments such as tunnel construction and high-rise building projects, clear voice communication significantly impacts work efficiency and safety. Traditional radios have issues with signal reach and noise, but the BbTALKIN MS utilizes Bluetooth 5.0 to achieve clear audio. It allows for simultaneous calls with up to six people, enabling smooth communication between underground and ground workers. 【Usage Scenarios】 - Sewer construction - Tunnel construction - Underground work - High-rise building construction - Bridge construction 【Benefits of Implementation】 - Reduction of communication errors in work instructions - Rapid response in emergencies - Improvement in work efficiency - Enhancement of safety

• others

● BbTALKIN MS is a Bluetooth intercom manufactured by ON'S COMPANY. ● With Bluetooth 5.0, the audio quality has become clearer. ● It allows for communication between up to 6 people, connecting above ground and underground. It is a hands-free simultaneous communication type. ● One master unit is installed above ground and one underground, connected by a cable (up to 100m). Each master unit can connect to 3 child units, allowing for hands-free simultaneous communication with a maximum of 6 units between above ground and underground. Clear audio communication is possible even in the complex underground environment. ● The communication distance from the master unit to the child unit is expected to be about 300m. *Note: The communication distance may vary depending on the location. This is just a guideline. ● It enables communication between underground workers and above-ground workers, making it recommended for sewer construction, tunnels, underground work, high-rise building construction, power cranes, bridge construction, surveying work, electrical work, civil engineering, and other work communication. ● It has an IPX8 waterproof rating and IP6X strong dustproof performance, allowing for safe use in rain and dust. *For more details, please feel free to contact us.

• others

●EBP-114 (EBP114) is a Li-Ion battery pack manufactured by Alinco. ●It is the charging battery for the standard configuration of the DJ-X100 main unit. ●It can power the DJ-X100 for approximately 16 hours (estimated). ●Charging can be done in about 5 hours using the included USB adapter EDC-328 and USB cable EDS-39. If using the separately sold rapid charger EDC-325A, it can be charged in 3.5 hours. ●Since it is a lithium-ion battery, it can be recharged repeatedly. ●The battery capacity is 3.6V/3120mAh. 【Compatible Models】 Receiver ・DJ-X100 ※Standard configuration of the main unit Specific low-power transceiver ・DJ-P400 For extremely low-priced sales of earphone microphones and batteries, leave it to Excelli. *For more details, please feel free to contact us.

• others

The DJ-X100 (DJX100) is a receiver manufactured by Alinco. It supports digital modes including STD-T98, DCR, STD-T102/B54, NXDN, DMR (TDMA business radio), D-STAR (voice only), and C4FM DN mode (voice only). It covers VHF/UHF frequencies from 30 to 470 MHz. It is equipped with a GPS receiver. The memory capacity is 999 channels, with 50 sets of program scans, and 26 memory banks. Memory can display name tags of up to 14 full-width characters (or 28 half-width characters). It features an offset step function that applies a 1/2 step shift. Analog AM and FM signals are processed with DSP for clear reception. The analog reception tone includes CTCSS (including reverse), DCS (including reverse), and JR/MSK squelch cancellation. It has a radio mode that allows listening to FM radio while waiting for communication. With a large-diameter speaker and BTL amplifier, it provides clear audio output. It is IP67 rated for dust and water resistance, making it safe to use in rainy conditions and dusty environments.

• others

● The RD628 (RD-628) is a digital base station radio device with relay functionality manufactured by Hytera. ● It is a DMR high-output base station radio with a maximum output of 25W. It also has relay functionality. ● Its sturdy casing allows for direct installation without the need for a rack. ● While being used as a radio base station, it can expand the communication range of the intrinsically safe explosion-proof radio PD798Ex. ● It features a compact and lightweight design. ● The output can be adjusted from 1W to 25W. ● It supports two communication lines in digital mode. ● It is compatible with both digital and analog modes and automatically switches between them. ● Other features include: - Built-in mini duplexer (optional) - IP connectivity (digital mode only) (optional) - Floating charge support / built-in AC power supply - Repeater diagnostics and control function (RDAC) ● Recommended for use in petrochemical plants, large commercial facilities, stadiums, oil plants, high-rise buildings, ski resorts, and more. ● Multiple base station radio devices with relay functionality can be connected via IP. ● A license application for general business radio use is required for operation. *For more details, please feel free to contact us.*

• others
• Call device

●EDC-325A (EDC325A) is a charging stand set manufactured by Alinco. ●This product includes the rapid charging stand EDC-325 and the AC adapter EDC-330. ●It is a charger for the handheld receiver DJ-X100. ●It is powered by a household AC100V power supply. ●It can charge the Li-Ion battery pack EBP-114 in approximately 3.5 hours. 【Compatible Models】 Receiver ・DJ-X100 For unbeatable prices on earphone microphones and batteries, trust Exceli. *For more details, please feel free to contact us.

• others

● CLC825 (CLC-825) is a carrying case made by wave CSR. ● It is a carrying case for the specific low-power, work communication hybrid transceiver HX827. ● It protects the HX827 from dirt, scratches, and impacts. ● It has a belt loop on the back. ● It can be used with the lithium-ion battery pack CBP825LI attached to the HX827. 【Compatible Models】 Specific low-power, work communication hybrid transceiver ・HX827 For extremely low-priced sales of earphone microphones and batteries, leave it to Excelli. *For more details, please feel free to contact us.

• others

● The MD658 (MD-658) is a vehicle-mounted general-purpose radio manufactured by Hytera. ● It is a general-purpose radio that complies with the latest DMR standards. ● It is a dual-mode device that supports both digital and analog, and is compatible with existing analog radios. ● It operates in the VHF band from 136 to 174 MHz and in the UHF band from 400 to 470 MHz. ● Since it uses DMR, the frequency step is 12.5 kHz. ● It employs Time Division Multiple Access (TDMA) technology. ● It supports individual calls, group calls, and broadcast calls. ● It includes an emergency call feature for urgent situations. ● It is a durable radio that meets MIL-STD-810 C/D/E/F/G standards. ● It has an IP54 rating for dust resistance and everyday water resistance. ● With DMO (Direct Mode), it allows two independent groups to use the same frequency without stress. ● The pseudo-trunking feature automatically detects and assigns available time slots between two time slots, allowing one radio to communicate individually while another radio communicates in a group. *For more details, please feel free to contact us.*

• others
• Call device

●EDC-325 (EDC325) is a rapid charging stand made by Alinco (ALINCO). ●It is a charger for the multi-mode receiver DJ-X100. ●Please use it in combination with the separately sold AC adapter EDC-330. ●It charges the DJ-X100 (Li-Ion battery pack EBP-114) in about 3.5 hours from a household power supply of AC100V. 【Compatible Models】 Receiver ・DJ-X100 For extremely low prices on earphone microphones and batteries, leave it to Excelli. *For more details, please feel free to contact us.

• others

● The HS-86 is a helmet-mounted microphone made by Icom. ● It is a helmet-mounted microphone that can be attached to professional helmets. ● It is a simple type that just requires inserting a clip into the helmet. The helmet fastener is a clip. * Please note that it may not be compatible with some helmets that have a wide brim. ● By using the dedicated communication switch built-in connection cable OPC-636, hands-free communication is possible. ● The microphone section comes with a windscreen cap to prevent wind noise. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. * For more details, please feel free to contact us.

• others

●CSM530 (CSM-530) is a flexible microphone (with magnet) made by wave CSR. ●It can be used with vehicle-mounted specific low-power transceivers like the GX100. ●The base part is magnetic, making it easy to install on the ceiling of a crane or similar locations. ●There is no PTT (push-to-talk) switch, so audio is continuously transmitted. You do not need to take your hands off the handle or controller each time you transmit. ●The microphone head can be adjusted to a 180-degree angle. 【Compatible Models】 Specific low-power transceivers Radio repeaters ・GX100A For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, feel free to contact us.

• others

● The GX100A (old model number GX100) is a specific low-power transceiver manufactured by wave CSR. ● It is a vehicle-mounted radio that can be used in vehicles and other applications. ● It supports simplex mode (intermittent communication), semi-duplex mode (relay communication), and full-duplex mode (simultaneous communication). ● The GX100A unit can also be used as a relay device (repeater mode). ● Features of intermittent communication: - The transmission output is fixed at 10mW. - Communication can be conducted by alternately pressing the PTT (transmit) button. - It can be used in combination with other specific low-power transceivers that support intermittent communication, such as the P1500 and B1500. - VOX (voice-operated transmission) function that automatically transmits when voice is detected. - Tone squelch function that prevents unnecessary radio audio output even if channels overlap. ● The manufacturer’s warranty is for one year. *For more details, please refer to the PDF document or feel free to contact us.*

• others

● CSA201 (CSA-201) is a rapid charger manufactured by wave CSR. ● It can be used with specific low-power transceivers and wireless relay devices made by wave CSR. ● It can charge lithium-ion battery packs LB201JA and CBP201LI. ● It can be powered from a household AC100V power source using the included dedicated AC adapter CAA1210FC. ● Charging is possible in both states: with the battery alone or when attached to the wireless device. 【Compatible Models】 Specific low-power transceiver ・P2010 Multi-user simultaneous communication wireless system ・P9010 For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact our company.

• others

● The CSB800 (CSB-800) is a 6-slot rapid charger manufactured by wave CSR (formerly Lecuo Standard). ● It can charge up to 6 lithium-ion battery packs CBP501LI simultaneously. ● Batteries can be charged either alone or while attached to the radio. ● Equipped with an LED lamp to check the charging status. ● An AC adapter AA10012200 is also included. ● Charging time estimate: approximately 4 hours. 【Compatible Models】 Receiver: - AX850 Digital Simple Radio Registered Station: - HX575UJD281S Digital Simple Radio Licensed Station: - HX575UJD121 Digital Simple Radio Licensed Station / Analog Simple Business Radio: - HX575VJD121 Digital General Business Radio / Analog General Business Radio: - HX575UJF121 - HX575UJF181 - HX575VJF121 For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, feel free to contact us.

• others

● The BT201JA (BT-201-JA) is a battery case for AA batteries made by wave CSR. ● It can be used with wave CSR's (formerly Lecuo Standard) specific low-power transceivers and specific low-power wireless telephone relay device R2000 for work communication. ● It operates on three AA alkaline batteries. ● It is attached by sliding it horizontally from the bottom of the radio body. *No screws are used. 【Compatible Models】 Specific low-power transceiver - P2010 Multi-party simultaneous communication wireless system - P9010 For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• others

●CBP501LI (CBP-501-LI) is a lithium-ion battery pack made by wave CSR. ●It can be mounted on digital simple radio registration stations. ●It features a large capacity design with a battery capacity of 7.4V/2250mAh. ●It is attached by sliding it from the bottom of the radio body. *No screws are used. 【Compatible Models】 Receiver: ・AX850 Digital Simple Radio Registration Station: ・HX575UJD281S Digital Simple Radio Licensed Station: ・HX575UJD121 Digital Simple Radio Licensed Station/Analog Simple Business Radio: ・HX575VJD121 Digital General Business Radio/Analog General Business Radio: ・HX575UJF121 ・HX575UJF181 ・HX575VJF121 For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• others

● The CBP600LIIS (CBP-600-LIIS) is a lithium-ion battery pack manufactured by wave CSR. ● It is the same rechargeable battery as the standard configuration for the UHF onboard communication equipment portable radio HX600UJFIS. ● The battery capacity is 7.2V/1950mAh. ● The operating time is approximately 10 hours. * Based on an output of 2W, with a transmission ratio of 1: reception 1: standby 18. ● When attached to the radio, it has an IP57 waterproof and dustproof rating. 【Compatible Models】 Analog general business radio ・HX600UJFIS For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. * For more details, please feel free to contact us.

• others

● The CBT600 (CBT-600) is a AA battery case made by wave CSR. ● It can be used with digital simple radios and general business radios made by wave CSR. ● It operates with 6 AA alkaline batteries. ● Ideal for use in emergencies when power supply is unavailable. ● The battery life (at 1W output) is approximately 6 hours. * This is an estimated time based on a usage ratio of 1 for transmission, 1 for reception, and 18 for standby. 【Compatible Models】 Receiver: - AX850 Digital Simple Radio Registered Station: - HX575UJD281S Digital Simple Radio Licensed Station: - HX575UJD121 Digital Simple Radio Licensed Station / Analog Simple Business Radio: - HX575VJD121 Digital General Business Radio / Analog General Business Radio: - HX575UJF121 - HX575UJF181 - HX575VJF121 For low-priced sales of earphone microphones and batteries, please leave it to Excelli. * For more details, feel free to contact us.

• others