インサイト List of Products and Services

The "IDMS-200 RUS" is a method in ultrasonic spectroscopy for determining elastic constants from the resonance frequencies of the free vibrations of solids, and in principle, it can determine all independent elastic constants. The USB2.0 interface allows for easy and fast data collection. A three-point support piezoelectric sensor is used for measuring the resonance frequency. This three-point support sensor does not require an acoustic coupling material, and since no external forces other than the sample's own weight act on it, it is possible to excite nearly perfect free vibrations. The IDMS-200 is a device based on the concept developed by the Hirao Laboratory of the Graduate School of Engineering Science at Osaka University. <Patent No. 4065937> *For more details, please refer to the related links or feel free to contact us.

• Vibration and Sound Level Meter
• Other measuring instruments

The RIG600 is a high-frequency power amplifier designed for use in industrial and embedded applications. It is suitable for driving ultrasonic transducers with high-output pulse signals and can be used as part of ultrasonic inspection systems. It is well-suited for applications that require high-output pulses of amplified waveforms such as single-tone bursts and frequency-modulated chirps. 【Features】 - Suitable for driving ultrasonic transducers with high-output pulse signals - Can be used as part of ultrasonic inspection systems - High-voltage protection super-fast blow fuse is detachable from the back side - Pulse width and repetition frequency limiting function *For more details, please refer to the PDF document or feel free to contact us.

• others

The "IS-202" is a desktop-type immersion ultrasonic testing device. It allows for internal inspections without damaging the inspection target. It can be used for a wide range of applications, from electronic components to metal materials. Based on the full waveform collection data during ultrasonic testing, it comes standard with specialized software for analysis, such as Insight Analysis for redrawing A, B, and C images, as well as Insight View for analyzing delamination area ratios, the number of voids, and coordinates. 【Features】 ■ Space-saving and suitable for tabletop use 　・Size: 570W × 450D × 490H (mm) 　・Weight: 35Kg (scanner body only) ■ Compatible with transmission method ■ Compact size makes relocation easy; can be carried by two people ■ Easy to replace water ■ Standard OS: Windows 10, CE compliant *For more details, please refer to the PDF document or feel free to contact us.

• others

"FlexScan" is a platform that supports 3D data collection, data analysis, and image display. It is useful for application development using traditional ultrasonic C-scan imaging, as well as electromagnetic ultrasound and laser ultrasound. Additionally, it supports multiple languages, allowing users involved in international collaborative research or domestic quality control to select a language according to their needs. The three types of high-speed A/D conversion boards form the core of this system and faithfully digitize ultrasonic waveforms. 【System Configuration】 ■Standard System X/Y/Z/T/A/R 3-6 Axis Scanner ■Precision Scanner X/Y/Z/T ■Large System X/Y/Z 3 Axis Scanner ■Wafer Inspection System ■Portable System 　Computer/Expansion/Pulser Receiver ■Shaft Inspection System *For more details, please refer to the PDF document or feel free to contact us.

• others

The "FAAST-PA" is a high-speed phased array flaw detector manufactured by Socomate, capable of transmitting multi-focus, multi-frequency, and multi-angle in a single shot and receiving it in real-time. It supports both 1D probes and 2D matrix probes, allowing for the detection of defects at various angles. Additionally, it is possible to simultaneously transmit beams from different apertures, significantly reducing inspection time. 【Features】 ■ Multi-focus: Simultaneous transmission of multiple delay laws ■ Multi-frequency: Transmission of different frequencies for each delay law ■ Multi-angle: Simultaneous transmission in multiple directions ■ Capability to simultaneously transmit beams from different apertures ■ Improved inspection speed and flexibility through combination with multi-beam *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• Other analytical equipment

CIVA is a non-destructive testing simulation software. It can perform flaw detection simulations using four methods: UT, RT/CT, GWT, and ET. 【Features】 - Ultrasonic Testing (UT) - Simulation of transducer beam propagation (Single probe, phased array probe, E-MAT) - Simulation of beam propagation within the test specimen (Pulse-echo, tandem, TOFD) - Materials (Metal materials, CFRP, concrete, acoustic anisotropic materials, etc.) - Radiation testing can be performed using both RT and CT. - It also supports guided waves and eddy currents. CIVA is currently used in over 170 companies, research institutes, and universities across 35 countries. It is applied in many fields, including aerospace, railway transportation, steel and metals, and fuel resources. *We also offer free demos and on-site demonstrations, so please feel free to contact us.

• Other measuring instruments
• Measurement and Analysis Equipment
• Other analytical equipment

The ultrasonic pulser/receiver square wave pulser achieves high-efficiency ultrasonic measurement, flaw detection, and EMAT drive for low-frequency, high-damping materials through the combination of the high-voltage, low-impedance, high-speed rise & fall time pulser SP-801A and the broadband, high-gain, high-linearity, high-speed recovery receiver BR-640A. For more details, please contact us or refer to the catalog.

• Other measuring instruments
• Other analytical equipment

The Pulsar/Receiver DPR300 is an ultrasonic pulsar receiver that achieves ultra-low noise through computer control. It allows for the selection of receiver gain, high-pass and low-pass frequency filters, pulse energy, pulse amplitude, pulsar impedance, damping, selection of single or dual probe methods, pulse repetition frequency, and trigger source. Additionally, the Pulsar/Receiver DPR500 is a dual-channel pulsar receiver that can house two completely independent pulsar receivers within a single unit. The receiver is available in three frequency bands: 500MHz, 300MHz, and 50MHz. The Pulsar/Receiver PRC50 is a half-size board type designed to be used in a computer's PCI bus slot. For more details, please contact us or refer to the catalog.

• Other measuring instruments
• Other analytical equipment

The ultrasonic C-SCAN imaging diagnostic device "InsightScan IS-202" is a device that evaluates the interior of products non-destructively using ultrasound. With a new high-speed, high-resolution scanning system, it enables the detection of minute defects with a minimum movement amount of 0.5μm in each axis, combined with a super-fast A/D conversion board. It can also support high frequencies of up to 500MHz as an option.

• Measurement and Analysis Equipment

The ultrasonic digital imaging diagnostic device "InsightScan IS-350" is a device that evaluates the interior of products non-destructively and without contact using ultrasound. It can detect internal defects in electronic components, metals, and welds non-destructively. [Reasons to Choose Insight] ■ "Optimization" of Inspections… We create devices tailored to your inspection target products. We accommodate various aspects such as scan size, tank depth, and selection of probes. ■ Customer Support… Ultrasonic testing is a specialized technology. We assist in training your engineers even after delivery. We provide post-installation training, new sample testing, selection of new probes, and support free of charge. We also assist when your personnel changes.

• Other measuring instruments

The PDL laser ultrasonic light source is a high-frequency stable, no initial setup required laser source designed for non-contact ultrasonic inspection. It uses the MOPA (Master Oscillator Pulsed Amplifier) method to amplify a low-output, high-stability seed laser to provide high output. Additionally, PDL's robust flash amplifier technology can be used in any environment, from laboratories to harsh factory settings. In laser ultrasonics, information is "encoded" in the laser beam reflected from the surface of the inspection object. To achieve optimal sensitivity with a laser ultrasonic detector, it is desirable to maximize the reference light to the test specimen. Typically, commercial CW lasers can ensure frequency stability only up to 2W. In a scattering state, this output does not provide sufficient S/N. PDL was designed to overcome such issues. The laser can be supplied through optical fibers up to 40m, allowing for flexible adaptation to industrial prototypes and commercial inspection systems. For more details, please contact us or refer to the catalog.

• Other measuring instruments
• Measurement and Analysis Equipment

The RPR-4000 ultrasonic physical property measurement device, manufactured by RITEC, supports ultrasonic nonlinear research with a high-performance, high-output ultrasonic pulser-receiver designed to minimize the nonlinear components contained in the transmitted waveform. The sine wave tone burst pulser used by RITEC supplies low-distortion, high-output signals to the sensor that cannot be obtained with square wave pulsers. The standard 8KW sine wave tone burst pulser can sufficiently drive electromagnetic ultrasonic transducers (EMAT). Additionally, the 100dB low-noise receiver amplifies the weak ultrasonic signals received by the EMAT to the required level with low distortion. RITEC's high-power products come standard with an automatic shutdown feature, which protects the transmitter from failures in the transducer or short circuits in the wiring. The front panel display and keypad eliminate the need for an external control computer (though control from an external computer via RS-232 interface is also possible). For more details, please contact us or refer to the catalog.

• Other measuring instruments

The RAM-5000 series manufactured by RITEC is a computer-controlled ultrasonic material property evaluation research system equipped with a high-power RF burst pulser, a wideband receiver, and a phase detector/integrator module. It is optimal for precise measurement of ultrasonic sound speed and attenuation in high-damping materials, research on nonlinear acoustic phenomena, multi-channel high-power RF burst pulse sources, or as a driver/receiver for low conversion efficiency transducers such as EMATs (Electromagnetic Acoustic Transducers). The RAM-5000 features a modular system configuration, allowing users to select the necessary module configuration from the Mark1 to Mark6 series. For example, multiple gated amplifier modules with high power pulse output can be selected to enable multi-channel drive. Additionally, a manually controlled or standalone gated amplifier system (equivalent to RAM-Mark2: 5kW output) is also available. A SNAP system developed specifically for research on nonlinear acoustic phenomena is also offered. For more details, please contact us or refer to the catalog.

• Other measuring instruments

The ultrasonic C-SCAN imaging diagnostic device "InsightScan IS-350" is a non-destructive evaluation device for the interior of semiconductors using ultrasound. With a new high-speed, high-resolution scanning system, it enables the detection of minute defects with a minimum movement of 0.5μm in each axis, combined with a super-fast A/D conversion board. It can also support high frequencies of up to 500MHz as an option. *For more details, please contact us or download the catalog to view.

• Non-destructive testing
• Other measuring instruments
• Other analytical equipment