T.K.K.エボリューション List of Products and Services

By installing a BW system utilizing the piping magnetite method in the water supply piping, the water quality will change, and the red rust inside the pipes will begin to transform into black rust. Black rust is a crystalline form closer to metal, with a density ten times higher than that of red rust, which improves the blockage rate within the pipes. Additionally, areas where the wall thickness has thinned to the point of almost leaking will be repaired by the black rust. This method can also be applied to drainage pipes. Please feel free to contact us for on-site surveys or estimates. *We are currently providing a comparison with other methods and case studies in PDF format. *For more details, please download the PDF or contact us. *The section titled 'What sparked your interest?' displayed during the PDF download is generated by Ipros Co., Ltd.'s AI.

• Water Treatment

If you install a BW system utilizing the piping magnetite method in your water supply pipe facilities, the water quality will change, and the red rust inside the pipes will begin to transform into black rust. Black rust is a crystalline form closer to metal, with a density ten times higher than that of red rust, which improves the blockage rate inside the pipes, and areas with thin walls on the verge of leaking will be repaired by the black rust. Additionally, this method can also be applied to drainage pipes. Please feel free to contact us for site surveys or estimates. * We are currently offering a comparison with other methods and case studies in PDF format. * For more details, please download the PDF or contact us. * The section titled 'Reason for Interest' displayed during the PDF download is generated by Ipros Inc.'s AI.

• Water Treatment

The "Piping Magnetite Method" is a technique that uses the treated water from the water treatment device "The Bio Water" to convert the red rust in water supply pipes into black rust (Fe3O4), thereby extending the life of the piping. Through water treatment, the crystals of the calcium carbonate coating inside the pipes become denser. As a result, the oxidation of the base metal beneath the coating progresses slowly, reacting with the existing red rust to form black rust (Fe2O3 + Fe0 → Fe3O4). This black rust formation repairs and restores the areas of pitting in the pipes. If we can obtain a sample of the water from the construction site, we will conduct a laboratory test to predict the effectiveness (this testing method is patented in Japan, the USA, Europe, Singapore, and Malaysia). Improvements in the blockage rate of the pipes, as well as the prevention of leaks and red water occurrence, can be achieved with a low budget and short construction period. Depending on the hardness, it is generally maintenance-free, thus reducing maintenance costs and efforts. 【Features】 ◇ Registered in NETIS (KT-160125-VR) ◇ Construction involves simple work attached to the water supply pipe, with a short construction period of about half a day to one day ◇ There is no need to replace the pipes, allowing for low-cost red rust countermeasures ◇ The effects are semi-permanent, allowing the water supply pipes to be used for the lifespan of the building ◇ The BOD of the wastewater decreases, reducing the environmental impact on water ◇ Since effectiveness can be predicted through laboratory tests, construction can be carried out with peace of mind.

• Water Treatment

■Construction Method 【Piping Magnetite Method】 Install BWΩ in the piping to modify the water passing through the device, converting red rust to black rust and repairing the deteriorated areas with black rust. 【Magnetic Method】 Install a magnetic device in the piping to increase the potential in areas that prevent iron from rusting. ■Construction 【Piping Magnetite Method】 Install at one location on the main water supply pipe. 【Magnetic Method】 Installation of the device is required every 50 meters. ■Maintenance 【Piping Magnetite Method】 No maintenance required. 【Magnetic Method】 The effectiveness weakens if the direction of the magnetic field is not changed every few years. ■Cost and Construction Period 【Piping Magnetite Method】 Particularly low cost compared to other methods, with a short construction period. 【Magnetic Method】 Lower cost and shorter construction period compared to other methods. ■Sustainability of Modified Water Effects 【Piping Magnetite Method】 Lab tests confirmed effects lasting 4 months, while field tests showed effects lasting up to 8 years. 【Magnetic Method】 Effects disappear in about 84 hours. ■Environmental Impact 【Piping Magnetite Method】 Becomes good water for domestic use, reducing the environmental burden of wastewater and other water-related issues. 【Magnetic Method】 No impact on the water environment. Additionally, comparisons with piping replacement work and lining methods are available in a PDF. For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment

Here is a case study from Maison Excellent (Sakae Ward, Yokohama City). In a condominium built in 1989, "The Bio Water" was installed in 1992. After 23 years of installation, in 2015, the pipes were removed along with the adjacent room that did not have the installation, and the differences between the two were confirmed. The sharp peaks observed in the modified water indicate the presence of rust-resistant magnetite and maghemite. On the other hand, the unmodified water showed oxyhydroxide iron, as well as goethite and ferrihydrite, which are components of red rust. [Qualitative Analysis Results of Modified Water] ■ Modified Water (Room 201) - Type of Rust: Black Rust - Condition of Rust Attachment: Hard and difficult to peel off - Detected Substances: Mostly magnetite and maghemite, with very small amounts of goethite and ferrihydrite *For more details, please refer to the related link page or feel free to contact us. *The section "Trigger for Interest" displayed during the PDF download is generated by the AI of Ipros Co., Ltd.

• Water Treatment

From November 2016 to June 2017 (for 8 months), a field test was conducted at the NTT-AT Creative Corporation headquarters factory (Tokushima Prefecture) on the circulating cooling line, aimed at addressing pipe deterioration and red water issues. A water conditioning device called The Bio Water (Punch Box: hereafter PB) was installed in the water tank of the closed circulating cooling line, and the changes in iron content and color of the water in the tank were regularly monitored. The water used is municipal water. During the test period, the water was not replaced, but approximately 20L/month of supplementary water was added. One month after the introduction of the "Pipe Magnetite Method," the red water became clear. Subsequently, the iron content and color fluctuated several times, gradually stabilizing to a clear water quality. 【Overview】 ■ November 2016 to June 2017 (for 8 months) ■ NTT-AT Creative Corporation headquarters factory (Tokushima Prefecture) ■ Conducted a field test on the circulating cooling line aimed at addressing pipe deterioration and red water issues. *For more details, please refer to the related links or feel free to contact us. *The section titled "Reason for Interest" displayed during the PDF download is generated by the AI of Ipros Inc.

• Water Treatment

We would like to introduce a case study on the energy-saving effects of our clean room air conditioning system's refrigeration unit. A water conditioning device, The Bio Water, was installed in the cooling tower (350RT) water tank, and changes in water quality were measured, along with changes in the power consumption of the refrigeration unit's compressor. Additionally, we confirmed changes in the replacement cycle of the filters installed in the cooling water for production equipment. The power consumption of the refrigeration unit's compressor decreased by 30% two months after the installation of The Bio Water. This was due to the removal of scale in the cooling water piping circulating from the cooling tower to the refrigeration unit, resulting in a reduced load on the compressor and confirming the energy-saving effect. [Test Overview] ■ Test Location: Taichung City Precision Injection Molding Factory ■ BW Installation Date: November 14, 2018 - Installation of The Bio Water in the cooling tower ■ Test Period: November 14, 2018 - January 25, 2019 ■ Test Content: Measurement of energy-saving effects of the refrigeration unit in the clean room air conditioning system * The production equipment installed in the clean room includes injection molding machines and deposition devices. * For more details, please refer to the PDF document or feel free to contact us.

• Refrigeration units, boilers, cooling towers

The "Piping Magnetite Method" is a technique that uses the treated water from the water treatment device "The Bio Water" to convert the red rust in water supply pipes into black rust (Fe3O4), thereby extending the life of the piping. Through water treatment, the crystals of the calcium carbonate coating inside the pipes become denser. As a result, the oxidation of the base metal beneath the coating progresses slowly, reacting with the existing red rust and turning into black rust (Fe2O3 + Fe0 → Fe3O4). This black rust formation repairs and restores the pitting in the pipes. If we can obtain a sample of the water from the construction site, we will conduct a laboratory test to predict the effects (this testing method is patented in Japan, the U.S., Europe, Singapore, and Malaysia). Improvements in the blockage rate of the pipes and prevention of leaks and red water can be achieved with a low budget and short construction period. Depending on the hardness, it is generally maintenance-free, thus reducing maintenance costs and efforts. 【Features】 ◇ NETIS registered (KT-160125-VR) ◇ The construction involves simple work at the water supply pipe connection, with a short construction period of about half a day to one day ◇ There is no need to replace the pipes, allowing for low-cost red rust countermeasures ◇ The effects are semi-permanent, enabling the water supply pipes to be used for the lifespan of the building ◇ The BOD of the wastewater is reduced, thereby lessening the environmental impact on water ◇ Since the effects can be predicted through laboratory tests, construction can be carried out with peace of mind.

• Water Treatment

We present a case study measuring the antioxidant capacity of The Bio Water Modified Water (flow treatment type direct connection) compared to tap water. By artificially generating a type of reactive oxygen species called superoxide, we measured which had a greater ability to eliminate superoxide when modified water was added versus when tap water was added, using the electron spin resonance (ESR) method. Tap water eliminated 40 units, while modified water eliminated 86 units, indicating that modified water has 2.15 times the reactive oxygen species removal capability of tap water. [Measurement Overview] ■ Measurer: Aging Control Inspection Department, Japan Aging Control Research Institute Additionally, in a case where the sister product Elan Vital was immersed in 500ml for 2 hours, measurements using the electron spin resonance method for superoxide showed that the modified water had a 6-fold improvement in reactive oxygen species removal function, which is said to be a cause of disease and aging. *For more details, please refer to the PDF document or feel free to contact us. *The section titled 'Trigger for Interest' displayed during PDF download is generated by the AI of Ipros Co., Ltd.

• Water Treatment

The processing fluid (40L) for wire cut electrical discharge machining was treated with tap water (from Kawasaki City) using a BW device, and the treated water was added each time the processing fluid was replenished. The lifespan of the ion exchange resin was compared over a period of 5 months with and without BW treated water. As a result, the lifespan of the ion exchange resin with untreated BW water was 1400 hours, while with treated water it was 2924 hours, showing that the ion exchange capacity was sustained for about twice as long. Additionally, the movement of the movable wire guide became stable, and the phenomenon of poor movement became nonexistent, significantly reducing machine stoppages during unmanned operation. 【Case Summary】 ■ Machine type: Sodick AQ300L ■ Test method - Treated tap water (from Kawasaki City) with BW device for processing fluid (40L) - Added treated water when the processing fluid decreased - Compared the lifespan of the ion exchange resin with and without BW treatment *For more details, please refer to the PDF document or feel free to contact us. *The section titled 'Reason for Interest' displayed during the PDF download is generated by Ipros Inc.'s AI.

• Water Treatment

This verification was conducted at the Kurihama Research Institute of Victor Company of Japan, Limited. The difference in the lifespan of the ion exchange resin was measured between the cases where The Bio Water was installed just before the ion exchange resin and where it was not installed. When The Bio Water was attached, we confirmed how much longer the lifespan of the ion exchange resin could be extended. As a result, with the water activator attached, the usage period was 62 days, compared to 45 days without it, allowing for an extension of 17 days (approximately 38%). [Test Conditions] ■ Ion exchange resin: Nippon Rensui Co., Ltd. C-40S (resin amount 40 liters) ■ Water conditioning device: Urban Expansion Co., Ltd. Ceramic water activator The Bio Water ■ Measuring instrument: Kurita Water Industries Ltd. Water quality meter KD-32 *For more details, please refer to the PDF document or feel free to contact us. *The section titled 'Trigger for Interest' displayed during the PDF download is generated by the AI of Ipros, Inc.

• Water Treatment

Here is a case study of Shibaura Mechatronics Co., Ltd. Building No. 2 (Yokohama City, Kanagawa Prefecture). The water from the circulating water system cushion tank (WT2) was treated with The Bio Water. As a comparison, the cushion tank (T2) from the clean room air conditioning system was used as an untreated control tank. Test pieces were placed in each tank for comparison. As a result, the shape and quality of rust that could form were completely different with and without The Bio Water, confirming that The Bio Water is effective in preventing the deterioration of the water supply pipes. 【Test Pieces Used】 - Two types were set: thin sheets of soft iron (Test Piece 1) and joints of GP pipes with the zinc plating removed (Test Piece 2). - Five sets of each were placed in each tank. *For more details, please refer to the PDF document or feel free to contact us. *The section titled "Trigger for Interest" displayed during the PDF download is generated by the AI of Ipros Co., Ltd.

• Water Treatment

Here is a case study from a certain copier manufacturer. The heat roll can be considered the heart of products such as copiers. If the heat roll is not perfectly round, it will cause unevenness in the printing surface, making the round shape a key point. Therefore, we always conduct inspections on all products, and sometimes manual polishing is performed. The yield rate of this component has improved by about 1% each year, but it plateaued at 95%. As a solution, we attached a BW device to the hot water washing machine after polishing to improve the quality of the water, resulting in an increase in yield from 95% to 100%. [Case Study] ■ Before BW installation: Yield 95% ■ After BW installation: Yield 100% *For more details, please refer to the PDF document or feel free to contact us. *The section titled 'Trigger for Interest' displayed during the PDF download is generated by Ipros Inc.'s AI.

• Water Treatment

We would like to introduce the results of the effectiveness analysis of The Bio Water conducted by a division of Hitachi, Ltd.'s Storage Division, Odawara CMS. After the installation of The Bio Water, the degradation rate of the solvent cleaning solution decreased to less than half, and the cleaning capability significantly improved. No scale (needle-like crystals of silica and calcium) has occurred in the filter tank. These effects were observed two weeks after the installation of The Bio Water. You can check the evaluation of the installation of The Bio Water on the "Package Board Pure Water Cleaning Device" by downloading the PDF below. The report sent from the other party has been published without any modifications, so please take a look. *For more details, please refer to the PDF document or feel free to contact us. *The section titled "Trigger of Interest" displayed during the PDF download is generated by AI from Ipros, Inc.

• Water Treatment

We would like to introduce a case of a laboratory test conducted at Ricoh's Ebina Factory to reduce excess sludge treatment costs. As a result of three BOD comparison tests, an average reduction of approximately 20% in BOD was confirmed. In this test, the wastewater was diluted by half. However, in practical use, since the entire wastewater is modified, a reduction of about 40% in BOD, which is double the test results, can be expected. 【Method of BOD Laboratory Test】 1. Collect 1 liter each of inflow and outflow water from Ricoh's Ebina Factory. 2. Divide the inflow water into 500ml portions, labeling them A and B. Similarly, divide the outflow water into 500ml portions. Further, modify inflow A with BW (Bio Water). 3. Mix inflow A with outflow A, and inflow B with outflow B (since it's 500ml each, the ratio is 1:1). 4. Measure the BOD of the BW-treated water and untreated water (using the 20°C 7-day incubation method). *For more details, please refer to the PDF document or feel free to contact us. *The section titled 'Reason for Interest' displayed during the PDF download is generated by AI from Ipros Inc.

• Water Treatment

We would like to introduce a case study from Ohtaki Co., Ltd.'s Ibaraki Factory. Out of the two automatic washing lines in the oshibori laundry factory, we installed the water conditioning device The Bio Water Ω80 on one line and compared the finishing results of the products from the line with the conditioning device and the line without it. Since we cannot meet the drainage standards (BOD25) of Mizumachi City, we are investigating the impact of water conditioning on drainage. *For more details, please refer to the PDF document or feel free to contact us. *The section titled 'Trigger for Interest' displayed during the PDF download is generated by AI from Ipros Co., Ltd.

• Water Treatment

Here is a case study from Mr. N's residence in Kōzu, Odawara City, Kanagawa Prefecture. Before the installation of The Bio Water, the activated sludge in the septic tank increased from 20% to 70-80% over three months. After the installation of The Bio Water, it dramatically decreased to 5%. The transparency of the septic tank water also surged from an average of 9.3 cm before installation to an average of 16 cm after installation, and the amount of dissolved oxygen, which activates aerobic microorganisms that consume sludge, also increased. You can check the changes in the SV value (sludge settling rate) and transparency of the septic tank at Mr. N's residence in the tables and graphs available for download in the "PDF Download" section below. Please take a look. *For more details, please refer to the PDF materials or feel free to contact us. *The section titled 'Trigger for Interest' displayed during the PDF download is generated by Ipros Co., Ltd.'s AI.

• Water Treatment

We would like to introduce a case study of two cooling towers at Hotel Diamont (Niigata City). A scale detachment test was conducted. The testing method involved installing two The Bio Water Punch Boxes in one of the two cooling towers under the same conditions. For each location, we conducted an analysis of "scale adhesion status" and "cooling water salt chamber analysis." In the cooling tower where The Bio Water Punch Boxes were installed, the packing material naturally detached scale. The water quality test of the cooling water demonstrated that The Bio Water has excellent rust prevention and scale detachment effects. [Case Study] ■ Testing Method - Installed two The Bio Water Punch Boxes in one of the two cooling towers under the same conditions. - Conducted "scale adhesion status" and "cooling water salt chamber analysis" for each location. *For more details, please refer to the PDF document or feel free to contact us. *The section titled 'Trigger for Interest' displayed during the PDF download is generated by Ipros Co., Ltd.'s AI.

• Water Treatment

We would like to introduce a case study from Hitachi Computer Equipment Co., Ltd. (Odawara City). A scale removal field test was conducted. The Bio Water was installed in the boiler feed water piping and makeup water piping on the premises. Two months later, significant scale suppression effects were observed in three areas: the interior of the boiler water pipes, the inner wall surfaces, and the screws of the inspection ports. By four months, the scale was completely suppressed, and the existing scale began to be removed. [Case Study] ■ Location: Boiler feed water piping and makeup water piping on the premises ■ Two months later - Significant scale suppression effects were observed in the interior, inner wall surfaces, and screws of the inspection ports. ■ Four months later - Scale was completely suppressed. - Existing scale also began to be removed. *For more details, please refer to the PDF document or feel free to contact us. *The section titled "What sparked your interest?" displayed during the PDF download is generated by Ipros Co., Ltd.'s AI.

• Water Treatment

We would like to introduce a case study from Rishin Nishi-Shinjuku Store (Bento Delivery, Tokyo). A scale removal field test was conducted. The Bio Water 1/3 was installed in the hyper steamer. Before installation, it was completely filled with scale, but after two weeks of installation, the scale began to peel off. [Case Study] ■ Location: Installation of The Bio Water 1/3 in the hyper steamer *For more details, please refer to the PDF document or feel free to contact us. *The section titled 'Trigger for Interest' displayed during the PDF download is generated by Ipros Inc.'s AI.

• Water Treatment

Scale refers to the phenomenon where calcium carbonate (CaCO3) or silicon dioxide (silica, SiO2) precipitates and adheres to pipes and water supply and heating equipment. We will introduce the reaction mechanism of scale detachment and prevention through the water modification of The Bio Water. In the case of calcium carbonate (CaCO3), with The Bio Water modified water, the gas that was dissolved under high pressure is encapsulated within the chain of water molecules (hydration) without vaporizing, and is preserved while maintaining a stable state among uniformly sized water molecules. As a result, CaCO3 reacts with water and the abundant CO2 to form water-soluble Ca(HCO3)2. CaCO3 + H2O + CO2 → Ca(HCO3)2 In the case of silicon dioxide (silica, SiO2), a phenomenon occurs where water molecules surround the silica SiO2 in the modified water. This makes it difficult for the silica SiO2 to link together, hindering the formation of a gel membrane, and making it less likely for a strong deposit layer to form as scale. On the other hand, in unmodified water, a strong layered gel membrane is formed. SiO2 + H2O → H2SiO3 *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment

We would like to introduce a case study from Matsubara Trading Co., Ltd. Tulip Cultivation Farm (Fujimi City, Saitama Prefecture). The tulip bulbs for hydroponic cultivation had a waste rate of about 13%, with 1-2% upon arrival, 3% due to mold during storage, 3% due to poor germination and rooting, and 6% that did not produce buds. To address this, we modified the hydroponic water with The Bio Water. All the bulbs sprouted. They continued to grow smoothly, achieving a yield rate of nearly 100%. Additionally, all the mold on the bulbs was completely eradicated. 【Case Study】 ■ Issue: Waste rate of about 13% ■ Proposal: Modify hydroponic water with The Bio Water ■ Results - All bulbs sprouted - Grew smoothly, achieving a yield rate of nearly 100% - All mold on the bulbs was completely eradicated *For more details, please refer to the PDF materials or feel free to contact us. *The section 'Trigger for Interest' displayed during the PDF download is generated by the AI of Ipros Co., Ltd.

• Water Treatment

We will introduce the cases of two companies in Tohoku (Company A and Company P) and one company in Kansai (N Steel Works). A comparison (survey) was conducted between The Bio Water modified water and tap water. Measurements were taken every Tuesday and Friday at 1 PM by veteran craftsmen with over 20 years of experience in metal processing. You can check the results of the measurements regarding 11 items, as well as changes in the cutting process due to the water quality of water-soluble cutting oils, from the "PDF Download." Please take a look. 【Implementation Items (Partial)】 ■ Dirt around the machine ■ Condition of the sliding oil on the surface of the cutting oil ■ Sludge condition inside the cutting oil tank ■ Bacteria (germs) proliferation condition ■ Intensity of unpleasant odors *For more details, please refer to the PDF materials or feel free to contact us. *The section "Trigger that sparked interest" displayed during the PDF download is generated by the AI of Ipros Co., Ltd.

• Water Treatment

We would like to introduce the lab data of the case study from the Kanagawa Prefectural Industrial Technology Center, "Sister Product Elan Vital." The bacteria began to decrease immediately after inoculation with E. coli, and after 8 hours, it was almost zero. Even after one day, the bacteria do not increase, so it is safe to carry at room temperature. In addition, you can check other data such as the "Factory Comparison Data of The Bio Water by Aqua Pier Co., Ltd. (Osaka Prefecture)" from the "PDF Download." We have published several examples of antibacterial effects. Please take a look. *For more details, please refer to the PDF materials or feel free to contact us. *The section "Trigger that sparked interest" displayed during the PDF download is shown by the AI of Ipros Co., Ltd.

• Water Treatment

We will introduce a case study from the Kitasato Environmental Science Center (Foundation). The test waters are "tap water" and "The Bio Water Modified Water." Each was placed in a 1L glass bottle, and Legionella bacteria and O-157 bacteria were injected into them. The bottles were set 3 meters apart and left undisturbed. The colony counts of each bacteria in the test waters were measured three times: immediately after sampling, one day later, and two days later. You can check the test results by downloading the PDF. *For more details, please refer to the PDF materials or feel free to contact us. *The section titled 'Trigger for Interest' displayed during the PDF download is generated by the AI of Ipros Inc.

• Water Treatment

We would like to introduce a case study by Professor Jun Sawai from the Department of Applied Chemistry at Kanagawa Institute of Technology. The samples used were "The Bio Water Modified Water," "Tap Water," "Distilled Water," and "Sterilized Distilled Water." 500ml of each of the four samples was prepared in two sterilized beakers. A small amount of the sample water was taken daily, and the total viable count was measured using the colony count method (using standard agar medium from Eiken Chemical). 【Case Study Results】 ■ BW Modified Water: No bacteria were detected ■ Tap Water: Bacteria appeared after 5 days ■ Distilled Water: Bacteria appeared on the same day ■ Sterilized Distilled Water: No bacteria were detected *For more details, please refer to the PDF document or feel free to contact us. *The section titled 'What sparked your interest' displayed during the PDF download is generated by the AI of Ipros Inc.

• Water Treatment

Here is a case study of the Kanki Cleaning Store in Katsushika, Tokyo. Ten years after the installation of The Bio Water, when the pipe was removed, a remarkable black rust coating covered the pipe wall (the type of pipe is GP pipe). At this point, the deterioration of the piping stops, and there are no leaks. Additionally, you can check the cases of Show Special Manufacturing Co., Ltd. (Kawasaki City) and Shikaoi Junior High School (Hokkaido) from the "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us. *The section titled 'Trigger for Interest' displayed during the PDF download is shown by the AI of Ipros Co., Ltd.

• Water Treatment

Here is the translation: We would like to introduce a case study of the Little Finger Heights Building J (Tokorozawa City, Saitama Prefecture). After investigating methods to prevent deterioration of the water supply pipes 20 years after construction, we installed The Bio Water following a year-long field test. The type of water supply pipe in this building is "internally coated lined steel pipe." This type of pipe is protected by a vinyl coating on the inside, but the ends of the pipes where they connect are exposed, allowing red rust to develop from that area. Furthermore, water can enter between the vinyl coating and the exposed metal, which can corrode the iron unnoticed and lead to leaks. We will introduce what happened to the two types of rust—"rust at the joint connection" and "rust that forms between the vinyl coating and the exposed metal"—five years after the installation of The Bio Water. [Five Years After The Bio Water Installation] ■ Rust at the Joint Connection - A white calcium layer formed on the exposed metal part of the joint, with a strong black rust layer beneath it. - Not only black rust, but also a calcium layer formed on top of it. - When the calcium layer is removed, the black rust beneath it is formed in a way that surrounds the exposed metal part of the joint, as if it were artificially welded. *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment

Here is an example from JR Takasaki Station (Takasaki City, Gunma Prefecture). Due to the mixing of well water with the main water supply, scale issues occurred in the station's shops. After installing The Bio Water in the shops for one year and observing the results, it was confirmed that scale adhesion was suppressed. In light of this result, we conducted the following tests to determine whether installing The Bio Water throughout the entire station building would be effective in suppressing scale and preventing the deterioration of the water supply facilities due to rust. From the measurement data of the roughness gauge, it was found that the mixed BW treated water showed smaller surface irregularities and that corrosion was progressing slowly across the entire surface. [Test Overview] ■ Test Method - The condition of test pieces (untreated main water, untreated well water, BW mixed water) was checked and analyzed at four intervals: at installation, 3 months later, 6 months later, and 23 months later. ■ Equipment Used - The Bio Water Omega-100 - Punch Box (16 pieces) *For more details, please refer to the PDF document or feel free to contact us. *The section titled 'Reason for Interest' displayed during PDF download is generated by AI from Ipros Co., Ltd.

• Water Treatment

Here is an introduction to the case of JR East Japan Minami-Nagasaki Housing (Minami-Nagasaki, Toshima Ward, Tokyo). We conducted a demonstration of magnetite (black rust) formation using the "Piping Magnetite Method." After 14 months of installing The Bio Water, we quantitatively analyzed the rust components to determine if black rust had indeed formed. When the ratio of divalent iron to trivalent iron in the rust is 1:2, it can be classified as black rust (i.e., magnetite Fe3O4). As a result, the divalent iron was measured at 0.6 and the trivalent iron at 1.3, giving a ratio of approximately 1:2. Given that the component ratio is nearly 1:2, we can conclude that this rust is indeed black rust. [Case Overview] ■ Test Methods - Qualitative analysis of rust components in the water supply pipe using fluorescent X-ray analysis - Obstruction rate of the water supply pipe using a gamma-ray piping diagnostic device - Measurement of remaining wall thickness using an ultrasonic thickness gauge - Water quality testing (iron content testing / conducted 9 times) *For more details, please refer to the PDF document or feel free to contact us. *The section titled "Trigger for Interest" displayed during the PDF download is generated by the AI of Ipros Co., Ltd.

• Water Treatment

The core technology of the "Piping Magnetite Method (TM)" is water modification. The water modification method that has been used in Japan for a long time utilized natural minerals. We perform water modification using artificially developed mineral crystals. This modified water changes the calcium carbonate film that forms on metal surfaces due to rust reactions into a denser form than usual. This dense film reduces the oxygen supply near the base metal beneath the rust layer. As a result, the progression of oxidation is delayed, causing red rust to turn into black rust. This black rust repairs and restores the areas eroded by red rust back to their original thickness, extending the lifespan of the water supply pipes. 【Features】 ■ Applicable to leaking pipes ■ Low cost ■ Short construction period ■ Generally maintenance-free ■ Usable for the lifespan of the building ■ Positive effects on drainage pipes ■ Feasibility tests can be conducted in the lab *For more details, please download the catalog or contact us. *The section "Reason for Interest" displayed during the PDF download is generated by the AI of Ipros Inc.

• Water Treatment

This document introduces the "Piping Magnetite Method," which allows for the restoration of corroded pipes and prevention of leaks without touching the pipes. It provides detailed explanations using diagrams and photos on topics such as "the difference between red rust and black rust," "the relationship between mineral crystals and water modification," and "the locations of red rust deterioration in VLGP pipes." Additionally, you can view case studies and comparisons with other methods. We encourage you to read it. 【Contents (excerpt)】 ■ What is the "Piping Magnetite Method"? ■ Changing water quality without touching the pipes ■ "Restoration" rather than "prevention" ■ Effects extending to drainage pipes ■ Comparison with other methods *For more details, please refer to the PDF document or feel free to contact us. *The section titled "What sparked your interest?" displayed during the PDF download is generated by Ipros Co., Ltd.'s AI.

• Water Treatment

We would like to introduce a case study of Ohtaki Co., Ltd.'s Ibaraki factory, which has implemented our proposed "Piping Magnetite Method." In the company's oshibori laundry factory, one of the two automatic cleaning lines was equipped with the water conditioning device "The Bio Water Ω80." A comparison was made between the product finishes of the line with the conditioning device and the line without it. As a result, the BOD levels decreased from 25 to 2.6 after the installation of the device, clearing the municipal standard within three months. Additionally, we also provide materials that cover all topics. [Case Study] ■ BOD Reduction in Wastewater Field Test ■ Location: Ohtaki Co., Ltd. Ibaraki Factory ■ Period: March 13, 2005 - June 13, 2005 *For more details, please refer to the PDF materials or feel free to contact us. *The section "Trigger for Interest" displayed during the PDF download is generated by the AI of Ipros Co., Ltd.

• Water Treatment

We would like to introduce a case study of NTT-AT Creative Co., Ltd., located in Itano-gun, Tokushima Prefecture, which has implemented our proposed "Piping Magnetite Method." The company has taken measures against red rust in the cooling water line by placing four punch boxes in the water tank (10t) of the circulating cooling water line. They collected water from the tank every week and conducted water quality tests four times. As a result, water quality improved, and the red rust components that had dissolved in the water turned into black rust. The red water issue was resolved. Additionally, we also have materials that cover all topics available for your review. [Case Study] ■ Measures against red rust in the cooling water line ■ NTT-AT Creative Co., Ltd. (Itano-gun, Tokushima Prefecture) ■ Installation of punch boxes (November 12, 2016) *For more details, please refer to the PDF materials or feel free to contact us. *The section "Trigger for Interest" displayed during the PDF download is generated by the AI of Ipros Co., Ltd.

• Water Treatment

This document explains the mechanism of black rust formation from red rust using the "Piping Magnetite Method" and the development of measurement devices. It provides detailed information, along with diagrams and photos, about the "process of the Piping Magnetite Method" and "devices for measuring the degree of water modification." Additionally, patents have been obtained both domestically and internationally. We encourage you to read it. We also introduce materials that cover all topics. [Contents] ■ Process of the "Piping Magnetite Method" (Formation of Calcium Coating) ■ Process of the "Piping Magnetite Method" (Formation of Iron Oxide under Calcium Coating) ■ Process of the "Piping Magnetite Method" (Completion of the Piping Magnetite Method) ■ Device for measuring the degree of water modification (Coating Resistance Measurement Method) ■ Patent Certificate *For more details, please refer to the PDF document or feel free to contact us. *The section titled 'Trigger for Interest' displayed during PDF download is generated by the AI of Ipros Co., Ltd.

• Water Treatment

The "Piping Magnetite Method" involves installing BW in the water supply pipes, which slows down the oxidation rate, transforming red rust into black rust and repairing the deteriorated areas. This method is also applicable to leaking pipes and has a semi-permanent effect. The "Piping Replacement Work" provides an immediate and fundamental solution as the pipes become brand new, but it is very costly and generates a large amount of waste. The "Lining Method" damages the pipes, making a second application impossible. The "Magnetic Device Installation" has issues such as being ineffective at low flow rates. We also offer materials that cover all these topics. 【Features of the Piping Magnetite Method】 ■ Low cost and short construction period ■ Effects extend to drainage pipes ■ Improved cleaning power, antioxidant power, and antibacterial power ■ Effect measurement device allows for FS *For more details, please refer to the PDF materials or feel free to contact us. *The section "Trigger for Interest" displayed during the PDF download is generated by the AI of Ipros Co., Ltd.

• Water Treatment

The "Piping Magnetite Method" is a technique that has transformed the traditional water purification technology into an industrial technology. Instead of using natural stones, it employs artificial mineral crystals, industrializing the traditional techniques. It repairs rusted pipes without touching them, restoring pipe thickness and allowing for leaks. Using "The Bio Water," we conducted three-dimensional measurements to see how the wall thickness of new GP pipes changes after 10 years. The results from measuring the wall thickness at 20 locations showed that all areas had increased in thickness compared to when they were new. Additionally, we also provide materials that cover all topics. 【Features】 ■ Repairs rusted pipes without touching them ■ Restores pipe thickness and allows for leaks ■ Changes water quality without touching the pipes ■ Installation is sufficient at one main point ■ Uses artificial mineral crystals instead of natural stones *For more details, please refer to the PDF materials or feel free to contact us. *The section "Reason for Interest" displayed during PDF download is generated by AI from Ipros Co., Ltd.

• Water Treatment

The "Piping Magnetite Method" uses the water quality improvement device "The Bio Water" to convert red rust in water supply pipes into black rust (ferric oxide), aiming to extend the lifespan of the piping. The modified water forms a dense and continuous coating of calcium carbonate and other substances inside the pipes. As the red rust transforms into black rust, it repairs and restores the corroded areas of the deteriorated piping. Improvements in the blockage rate of the piping, as well as the prevention of leaks and red water occurrence, can be achieved at low cost and in a short construction period. Depending on the hardness, it is generally maintenance-free, thus reducing maintenance costs and efforts. 【Features】 ■ NETIS registration [KT-160125-A] ■ Installation involves simple construction at the water supply pipe's origin, with a short construction period of about half a day to one day ■ There is no need to replace pipes, allowing for low-cost measures against red rust ■ The effects are semi-permanent, enabling the use of water supply pipes for the lifespan of the building ■ Reduces BOD in wastewater, thereby lessening the environmental burden on water *From the download link below, you can view materials introducing the "Piping Magnetite Method" and the product catalog for "The Bio Water" all together. *The section titled "Trigger for Interest" displayed during the PDF download is generated by the AI of Ipros Co., Ltd.

• Water Treatment

By installing The Bio Water in the water supply pipe, it changes the quality of the water and slows down the oxidation rate of iron, promoting the formation of a stable oxide film (black rust) inside the piping. Existing red rust will also transform into black rust. Since black rust has a density about ten times higher than red rust, the blockage rate of the piping will improve. Additionally, piping that has lost thickness due to deterioration and is on the verge of leaking can be restored to its original thickness through black rust formation, thus avoiding the risk of leakage. 【Features】 ○ Low cost ○ Short construction period ○ Essentially maintenance-free ○ Can be safely used in water supply pipes until the building's lifespan *For more details, please contact us or download the catalog. *The section titled 'What sparked your interest?' displayed during the PDF download is generated by Ipros Co., Ltd.'s AI.

• others

We have developed "The Bio Water," a new technology aimed at fundamentally changing the water environment by transforming tap water into water resembling the pure spring water found in mountains. This device also features a self-assessment system that determines its own water modification capabilities, making it a completed industrial technology. By simply installing it in the water supply pipes, tap water undergoes physical changes to resemble spring water, effectively addressing issues such as red rust, red water, and scale, while also forming black rust that prevents the progression of corrosion. 【Features】 ■ Significant reduction in sludge volume in septic tanks ■ Extended lifespan of ion exchange resins ■ Natural detachment of scale ■ No decay even after one week ■ Rust and corrosion prevention for water supply pipes *For more details, please request materials or view the PDF data available for download. *The section titled 'Reason for Interest' displayed during the PDF download is generated by the AI of Ipros Co., Ltd.

• others

This is a live water device that connects directly to the pipe and neutralizes without removing chlorine! 【What is restructured water?】 The chlorine in active water is hydrated, so it does not bond with other elements. It retains its disinfection ability and creates safe, vibrant water, which is Bio Water. ＝＝＝ Main Applications (excerpt) ＝＝＝ ● Disk, semiconductor, and substrate manufacturing ● Food manufacturing factories ● Medical facilities ● Brewing industry ● Office buildings ● Production farms, shipping areas, cut vegetable factories ● Saunas, pools, bathing facilities ● Livestock industry ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ Published Patent: No. 11-33541 Published Patent: No. 2000-107752 Utility Model Registration: No. 1888871 Design Registration: No. 33599 Trademark Registration: No. 120935 Japan Water Works Association Water Supply Equipment Certification Registration: No. Z-92, Z-93 Ministry of Health, Labour and Welfare Water Supply Law Standard Compliance: No. JIS-3200-07 ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ *For more details, please refer to the materials and catalog.

• Water supply facilities