菱電湘南エレクトロニクス List of News Articles

We would like to announce the UT Level 2 New Primary Examination (Written) Preparation Seminar for the Spring of Reiwa Year 7. This is an announcement for the UT Level 2 New Primary Examination Written Test Preparation Seminar led by the charismatic teacher, Shojo, the representative of Sona Engineer, who is highly regarded in UT seminars. Due to the high popularity of Shojo's passionate seminars, we recommend making reservations early. Registration is on a first-come, first-served basis, so please apply as soon as possible. To apply, please download the PDF for the Reiwa Year 7 Spring New Primary Examination (Written) Preparation Seminar, review it, and apply directly to the organizer.

This is a preparatory seminar for the NDI Autumn Contract Examination (September 21, September 22). It will be held by the Western Japan Branch of the Japan Non-Destructive Testing Association. 1. Venue: L Osaka (Osaka Prefectural Labor Center) 3-14 Kitahama Higashi, Chuo Ward, Osaka City, Osaka Prefecture 540-0031 TEL: 06-6942-0001 2. Access: 300 meters west from Tenmabashi Station on the Osaka Metro Tanimachi Line and Keihan Electric Railway 500 meters east from Kitahama Station on the Osaka Metro Sakaisuji Line and Keihan Electric Railway 3. Date of the event: (UT Level 2) Other examination qualifications will also be conducted. September 7, 2024 (Saturday) Course hours are from 9:00 AM to 5:00 PM, with approximately 12 participants per subject. 4. Items to bring: Course application form (with reception stamp) Level 2 textbook (edited by the Japan Non-Destructive Testing Association) Writing utensils, scientific calculator 5. Application method and deadline, course fee: Please apply using the "Course Application Form" from the Association's website. Application deadline: August 22, 2024 (Thursday), but it will close as soon as the capacity is reached. Course fee: Association members: 6,000 yen, Non-members: 8,000 yen.

This is information about a training session for the Ultrasonic Testing Level 1 Examination (theoretical) preparation. The Japan Non-Destructive Testing Industrial Association, Eastern Japan Branch, will hold an autumn Level 1 examination training session in Tokyo as detailed below. 1. Training Venue: Japan Non-Destructive Testing Industrial Association 2-8-1 Tomitaka Building, Uchikanda, Chiyoda-ku, Tokyo 101-0047 TEL: 03-5207-5960 FAX: 03-5207-5961 2. Access: 5-minute walk from the west exit of JR Kanda Station 3. Dates: (UT Level 2) Other examination qualifications will also be conducted. From September 2 (Monday), 2024, to September 3 (Tuesday), 2024. Class hours are from 9:30 AM to 4:30 PM. For information on course fees, etc. (please check the industrial association's website or the attached PDF guide for details).

This is a practical training course for the re-certification examination of Ultrasonic Testing (UT) Level 1 and Level 2 technicians. It is aimed at those taking the re-certification exam from August 21 to 25. We will conduct a practical training course for re-certification candidates for NDI certification qualifications UT Level 1 and Level 2, in accordance with JIS Z 2305: 2013, co-hosted by the Chiba Prefecture Non-Destructive Testing Research Association and the Chiba Prefecture Steel Structure Industry Association. 1. Target Participants: Candidates for the re-certification exam taking place in the Tokyo area from August 21 to 25. 2. Training Venue: 1st Floor Conference Room, Chiba Prefectural Industrial Support Technology Research Institute, 6-13-1 Tendai, Inage Ward, Chiba City. 3. Dates: From August 5 (Monday) to August 7 (Wednesday), 2024. Training hours are from 9:00 AM to 4:20 PM. A total of 8 participants for Level 1 and Level 2 combined, with Level 1 being a 2-day course. For information on participation fees and other details, please check the research association's website or the attached PDF guide.

The first and second re-certification exams scheduled for the end of August 2024 are the target. ⚫️ Eligibility for the re-certification exam 　・For those whose qualification is valid until March 31, 2025, they are eligible for the first re-certification exam (initial) 　　*Those who applied to take the re-certification exam in April of this year are eligible. 　・For those whose qualification is valid until September 30, 2024, they are eligible for the second re-certification exam 　　*Eligible candidates are those who failed the re-certification exams conducted in late February and late May of this year. Venue: Polytechnic Center Kansai (Kansai Vocational Ability Development Promotion Center), Settsu City, Osaka Prefecture We are pleased to announce a practical exam preparation seminar led by the renowned Sonai Engineer, Shoujou, known as a charismatic instructor for UT training sessions. This seminar will take place over three days from July 30 to August 1. Due to the high popularity of Shoujou's passionate seminars, early reservations are recommended. Please download the practical training seminar information PDF below, review it, and apply directly to the organizer. The application deadline is until 5:00 PM on July 24, 2024 (Wednesday).

We would like to inform you about the Autumn UT Level 2 Written (First) Exam Preparation Course. Polytechnic Center Kansai (Kansai Vocational Ability Development Promotion Center), Settsu City, Osaka Prefecture. This is an announcement for the UT Level 2 Written (First) Exam Preparation Course led by the renowned Sonai Engineer Shoujou, known as a charismatic instructor in UT courses. This time, the course will be held over a total of six days, from July 7 to 9 and July 14 to 16. Due to the high popularity of Shoujou's passionate courses, early reservation is recommended. Please download the PDF for the practical training course information below, review it, and apply directly to the organizer. The application deadline is set for July 4, 2024 (Thursday) at 5:00 PM.

This is information about the ultrasonic flaw detector handling training session. As of April 25, 2024, there are openings available. Japan Welding Engineering Center - May 15 (Wednesday) to May 16 (Thursday) for 2 days, UT Level 1, 12 participants each for R and G - June 4 (Tuesday) to June 6 (Thursday) for 3 days, UT Level 2, 12 participants each for R and G In the practical training session, we aim to provide instruction that closely resembles the actual practical exam, with the goal of having all participants pass. Additionally, for Level 2 candidates, we will also provide guidance on the preparation of NDT instructions. Please note that in the ultrasonic training session, practical instruction will be conducted using the same digital flaw detector that will be used in the practical exam, so please fill in the type of flaw detector (G type or R type) you applied for on the application form for this training session. For information on participation fees and other details, please check the Japan Welding Engineering Center website.

This is information about a training session for practical exams on ultrasonic flaw detectors. A practical training session will be held as co-hosted by the Chiba Prefecture Non-Destructive Testing Research Association and the Chiba Prefecture Steel Frame Industry Association, targeting new candidates (those who pass the first exam in the spring of Reiwa 6) and re-examinees for the NDI certification qualification UT Level 2, in accordance with JIS Z 2305: 2013, as detailed below. 1. Target Audience: Those planning to take the new/re-certification practical exam conducted by JSNDI in the Tokyo area in June. 2. Training Venue: 6-13-1 Tendai, Inage-ku, Chiba City Conference Room, 1st Floor, Chiba Prefectural Industrial Support Technology Research Institute 3. Dates: From June 3 (Monday) to June 5 (Wednesday), Reiwa 6, with training hours from 9:00 to 16:20. For information on participation fees, please check the research association's website or the attached PDF guide.

This is information about a training session for practical exams on ultrasonic flaw detectors. Co-hosted by the Chiba Prefecture Non-Destructive Testing Research Association and the Chiba Prefecture Steel Structure Industry Association, a practical training session will be conducted for new candidates (those who passed the first exam in the spring of Reiwa 6) and those taking re-examinations or re-certifications, in accordance with JIS Z 2305: 2013. 1. Target Audience: Limited to those planning to take the new/re-certification practical exam conducted by JSNDI in the Tokyo area in June. 2. Training Venue: 1st Floor Conference Room, Chiba Prefectural Industrial Support Technology Research Institute, 6-13-1 Tendai, Inage Ward, Chiba City. 3. Date of Event: From May 30 (Thursday) to May 31 (Friday), Reiwa 6, with training hours from 9:00 to 16:20. For information on participation fees, please check the research association's website or the attached PDF guide.

We would like to announce a training course for the practical examination preparation for the new and re-certification (renewal) of Ultrasonic Testing Level 2. This is a practical examination preparation course for UT Level 1 conducted by the renowned Sonar Engineer Shojo, who is known for his high pass rate and enthusiastic instruction, making him a charismatic teacher in UT training. Due to the high popularity of Shojo's passionate courses, early reservation is recommended. Please download the following practical training course information PDF, review it, and apply directly to the organizer.