ウェーブクレスト List of Products and Services

The TBCP3-1000 is a fixed aperture RF current monitoring probe. It has a very flat response with a 3dB bandwidth of 1 GHz and is characterized and usable over a frequency range of 30 kHz to 1 GHz. The aperture of the RF current monitoring probe is 17 mm. Its transfer impedance is close to 20 dB ohms in the range of 3 MHz to 1 GHz. Tekbox provides calibration fixtures for the TBCP3 series of fixed aperture current probes.

• Other measuring instruments

【TBCP4-250】 The TBCP4-250 exhibits a very flat response with a 3dB bandwidth of 250 MHz and is characterized and usable over a frequency range of 10 kHz to 250 MHz. The opening of the RF current monitoring probe is 32 mm. Its transfer impedance is close to 14 dB ohms in the range of 400 kHz to 250 MHz. 【TBCP4-500】 The TBCP4-500 exhibits a very flat response with a 3dB bandwidth of 500 MHz and is characterized and usable over a frequency range of 10 kHz to 500 MHz. The opening of the RF current monitoring probe is 32 mm. Its transfer impedance is close to 16 dB ohms in the range of 400 kHz to 500 MHz. 【TBCP4-750】 The TBCP4-750 exhibits a very flat response with a 3dB bandwidth of 750 MHz and is characterized and usable over a frequency range of 10 kHz to 800 MHz. The opening of the RF current monitoring probe is 32 mm. Its transfer impedance is close to 20 dB ohms in the range of 400 kHz to 750 MHz.

• Other measuring instruments

The UBBV-NF series preamplifiers are designed for all low-frequency applications. Starting from DC / 1Hz, they are particularly suitable for conductive emission measurements in the low-frequency spectrum, either as audio amplifiers or as sensitivity amplifiers for probes and magnetic field tracking antennas.

• Measurement and Inspection
• others
• Other measuring instruments

The UBBV-HF preamplifier achieves maximum performance, especially when measuring very weak signals. It is highly recommended for pre-compliance tests such as EMC, EN55011, EN55022, and EN50371.

• Measurement and Inspection
• others
• Other measuring instruments

The HR-E 40-1 electric field probe was developed for the analysis and measurement of high-frequency structures (such as 5G modules and microwave components). The HR-E 40-1 is a passive near-field probe designed to measure electric fields up to 40GHz. The probe's resolution is 0.2mm. For reproducible measurements of circuits and signal lines, it is recommended to use a test setup with the LangerIC scanner.

• Other measuring instruments
• Analysis and prediction system

A powerful and flexible tool for testing broadcast and RF devices. It offers reliable automatic measurements and a wealth of features, including a tracking generator and multiple operating modes.

• others

A powerful and flexible tool for testing broadcast and RF devices. It offers reliable automatic measurements and a wealth of features, including a tracking generator and multiple operating modes.

• others

**Product Overview** The TBL0550-1 5µH LISN is a device necessary for setting up conducted noise measurements of electronic equipment powered by DC sources. It is designed to comply with CISPR 16-1-2, CISPR-25, EN55025, MIL-STD-461F, and ISO11452-4, and is intended for measurements in the frequency range of 150kHz to 110MHz, with limited use of DO-160 / ED-14G and ISO7637-2. The LISN is inserted into the supply line of the DUT (Device Under Test). Conducted noise present at the power terminals of the DUT can be measured via a BNC connector using a spectrum analyzer or measurement receiver. The source (power) terminal and the DUT terminal are decoupled by a 5µH inductor. By combining two TBL0550-1 units with the Tekbox LISN Mate, common mode noise and differential mode noise can be measured separately. The unit is equipped with a BNC male-N-male RG232 cable, coupling connectors, and a ground bracket for connection to a ground plane.

• Measurement and analysis equipment leasing and rental

**Product Overview** The TBL5016-2 is a line impedance stabilization network designed to measure conducted interference in the range of 9kHz to 30MHz, in accordance with the CISPR 16-1-2 standard. This device is designed to test single-phase AC power supplies with a maximum supply voltage of 240V and 16A. Conducted noise can be measured on both the phase and neutral lines. The TBL5016-2 is equipped with a switchable limiter/attenuator and an artificial manual connection. This device is available with country-specific DUT connectors.

• Measurement and analysis equipment leasing and rental

【Product Overview】 The TBLC08 50μH LISN is a line impedance stabilization network designed to measure line-conducted interference in the frequency range of 9kHz to 30MHz, in accordance with the CISPR16 standard. This device is designed to test single-phase AC power supplies with a maximum supply voltage of 240V. Conducted noise can be measured on both the phase and neutral lines. The TBLC08 features a switchable limiter/attenuator and an artificial hand connection. This device is available with country-specific DUT connectors.

• Measurement and analysis equipment leasing and rental

The TBMDA4 modulated wideband power amplifier is designed to create a low-cost signal source for immunity testing of electronic building blocks and products, driven by the output of a spectrum analyzer's tracking generator. It can boost the output power of the tracking generator up to 5W within an input power range of -5 dBm to 0 dBm. It ideally complements the TBMDA3, covering a frequency range from 10 MHz to 1 GHz, with a frequency range of 100 kHz to 50 MHz. The TBMDA4 is ideal for driving Tekbox near-field probes to find sensitive spots in electronic circuits, creating electric fields of up to 550 V/m when driving the TEM cell TBTC0, and 300 V/m when driving TBTC1. When driving TBTC2 or TBTC3, it generates 100 V/m. The test signals for immunity testing can be CW, AM, or PM modulated, providing built-in modulation capabilities to generate 1 kHz AM or PM signals. In PM mode, the TBMDA4 can also generate a 217 Hz signal with a 12.5% duty cycle to simulate mobile phone TDMA noise.

• Other measuring instruments
• Analysis and prediction system

The TBMDA3 wideband power amplifier with modulation capability is designed to create a low-cost signal source for immunity testing of electronic building blocks and products. It is designed to be driven by the tracking generator output of a spectrum analyzer. Its high gain allows it to boost the output power of any tracking generator up to 5W. The TBMDA3 is ideal for driving Tekbox near-field probes to find sensitive spots in electronic circuits, or for generating electric fields of up to 550V/m when driving the Tekbox TEM cell TBTC0, and 300V/m when driving TBTC1. When driving TBTC2 or TBTC3, it generates 100V/m. The test signals for immunity testing can be modulated in CW, AM, or PM. As a result, the TBMDA3 provides built-in modulation capabilities to generate 1 kHz AM or PM signals. In PM mode, the TBMDA3 can also generate a 217 Hz signal with a 12.5% duty cycle to simulate mobile phone TDMA noise.

• Other measuring instruments
• Analysis and prediction system

The TBDA1/28dB wideband driver amplifier is a highly versatile building block that can be easily integrated into lab setups. With a frequency range of 40MHz to 3GHz and an output power of +22dBm at 1dB compression, these amplifiers are ideal for boosting the amplitude of low-power RF sources or driving power amplifier stages. The TBDA1 wideband amplifier is available with a gain of 28dB.

• Other measuring instruments
• Analysis and prediction system

The TBDA1/14dB wideband driver amplifier is a highly versatile building block that can be easily integrated into lab setups. With a frequency range of 40MHz to 3GHz and an output power of +22dBm at 1dB compression, these are ideal for boosting the amplitude of low-power RF sources or driving power amplifier stages. The TBDA1 wideband amplifier is available with a gain of 14dB.

• Other measuring instruments
• Analysis and prediction system

The TBMDA2 wideband driver amplifier with modulation capability is designed to create a low-cost signal source for immunity testing of electronic building blocks and products. It is intended to be driven by the tracking generator output of a spectrum analyzer. With a +27dBm 1dB compression point, it can boost the output power of the tracking generator up to 500mW. The TBMDA2 can drive Tekbox near-field probes to find sensitive spots in electronic circuits, or create electric fields of up to 170V/m when driving the Tekbox TEM cell TBTC0, and is optimal for 100V/m when driving TBTC1 at 50V/m. When driving TBTC2 or TBTC3, it can produce 30V/m. The test signals for immunity testing can be CW, AM, or PM. As a result, the TBMDA2 provides built-in modulation capabilities to generate 1 kHz AM or PM signals. In PM mode, the TBMDA2 can also generate a 217 Hz signal with a 12.5% duty cycle to simulate mobile phone TDMA noise.

• Other measuring instruments
• Analysis and prediction system

The TBMDA1 modulated wideband driver amplifier is designed to create a low-cost signal source for immunity testing of electronic building blocks and products. It is designed to be driven by the tracking generator output of a spectrum analyzer. With a gain of 22 dB and a 1 dB compression point of +22 dBm, it can boost the output power of the tracking generator up to 150 mW. The TBMDA1 is ideal for driving Tekbox near-field probes to generate electric fields of up to 50 V/m when locating sensitive spots in electronic circuits or when driving the Tekbox TEM cell TBTC1, or 25 V/m when driving TBTC2 or 18 V/m when driving TBTC3. The test signals for immunity testing can be CW, AM, or PM. As a result, the TBMDA1 provides built-in modulation capabilities to generate 1 kHz AM or PM signals. In PM mode, the TBMDA1 can also generate a 217 Hz signal with a 12.5% duty cycle to simulate mobile phone TDMA noise.

• Other measuring instruments
• Analysis and prediction system

The TBHDR1 from TekBox Digital Solutions is an ideal alternative preamplifier for spectrum analyzers and receivers in EMC test applications due to its high IP3 and low noise figure. With its low noise figure, high IP3, and gain up to the kHz range, it also performs exceptionally well as an amplifier for active loop antennas.

• Other measuring instruments
• Analysis and prediction system

**Main Features** - Maximum output frequency of 100 MHz - 500 MSa/s sample rate, vertical resolution of 1 μHz - 14-bit vertical resolution, 10 Marb waveform length - Comprehensive waveform output: 6 basic waveforms and 150 built-in arbitrary waveforms - Comprehensive modulation functions: AM, FM, PM, FSK, 4FSK, PSK, OSK, ASK, BPSK, PWM, sweep, burst - High-precision frequency counter integrated, supporting a range of 100 mHz to 200 MHz - Supports SCPI and LabVIEW - 7-inch (800×480 pixels) multi-touch screen, supported

• others

The SIGLENT SSA3000X Plus series spectrum analyzer is a powerful and flexible tool for RF signal and network analysis.

• Other measuring instruments

The TBFL1 is a combination of a transient limiter, attenuator, and high-pass filter, designed to optimally protect the input of a spectrum analyzer or measurement receiver when performing conducted noise measurements or other measurements where the input level cannot be reliably predicted or where accidental overloads may occur. By combining pins and Schottky diodes with a multi-stage 10dB attenuator, it becomes a device capable of withstanding continuous RF input levels of up to 5W (37dBm). The gas discharge tube provides additional protection against high-voltage transients. Furthermore, the 9 kHz high-pass filter suppresses harmonics of the power supply voltage. With a limiting threshold of +11dBm and a flat frequency response from 9 kHz to 600 MHz, the TBFL1 limiter can be used as a protective device for the entire range of conducted noise measurements and in many other applications.

• others

【Product Overview】 + Infrared thermal image with a resolution of 320×240 + Three fusion modes combining visible and infrared + Three image enhancement modes for various applications + Customized upper and lower temperature alarms + Computer analysis software for more specialized industry applications + Multiple measurement methods to ensure no temperature is hidden + Five color palettes (Black Hot, White Hot, Rainbow, Iron, Enhanced Iron) + Large internal memory capable of storing up to 20,000 images + Temperature measurement range of -20°C to 350°C + Adjustable emissivity (0.01-0.99), default 0.95 + Image capture using three image storage for multi-view analysis + 3.5-inch TFT LCD

• Other measuring instruments
• Measurement and Inspection
• Video Monitoring System

【TBCP1-200】 The TBCP1-200 is a fixed aperture RF current monitoring probe. The probe has a 3dB bandwidth of approximately 200 MHz. The aperture of the RF current monitoring probe is 25 mm. Its transmission impedance is > 14 dB ohms in the range of 40 kHz to 200 MHz. 【TBCP1-250】 The TBCP1-250 is a fixed aperture RF current monitoring probe. The probe shows a very flat response with a 3dB bandwidth of 250 MHz and is characterized and usable in the frequency range of 30 kHz to 250 MHz. The aperture of the RF current monitoring probe is 25 mm. Its transmission impedance is > 16 dB ohms in the range of 300 kHz to 250 MHz. 【TBCP1-500】 The TBCP1-500 is a fixed aperture RF current monitoring probe. The probe shows a very flat response with a 3dB bandwidth of 500 MHz and is characterized and usable in the frequency range of 30 kHz to 500 MHz. The aperture of the RF current monitoring probe is 25 mm. Its transmission impedance is > 15 dB ohms in the range of 300 kHz to 500 MHz.

• Other measuring instruments

The TBWA2 wideband RF amplifier from TekBox Digital Solutions is a versatile building block that can be easily integrated into laboratory setups. With a bandwidth of 2MHz to 6GHz, it is ideal for amplifying signals picked up by EMC near-field probes. The TBWA2 wideband amplifier is available with a gain of 20dB or 40dB.

• Other measuring instruments
• Analysis and prediction system

<Managing Indoor Environment with Smartphone> Connect your smartphone to Aranet4 via Bluetooth using the iOS or Android app to configure device settings, view historical data, and set alarms and sensor reading frequencies. Aranet4 monitors §carbon dioxide (CO2) §temperature §humidity §atmospheric pressure. <Carbon Dioxide Monitor Aranet4 is also active in Agriculture and Livestock!!> https://wavecrestkk.co.jp/wc/news/aranet4co2-monitor/

• Other office supplies
• Other commercial buildings and service facilities
• fireplace

- Frequency range from 9 kHz to 1.6 GHz / 3.6 GHz - -160 dBm DANL (Displayed Average Noise Level) - Phase noise -80 dBc / Hz @ 1GHz @ 10 kHz offset - Minimum resolution bandwidth (RBW) of 10Hz - Total amplitude accuracy of 1.5dB - EMI pre-compliance test capability, with optional EMC test software available - Standard pass/fail onsite test alert function - Lithium-ion battery with a maximum operating life of 4 to 6 hours - Optional 1.6GHz / 3.6GHz tracking generator, 3.6GHz signal generator - Standard GPS receiver, optional antenna, capable of recording latitude/longitude information and test information - 8-inch (1024 * 768) IPS LCD touchscreen with wider viewing angles and an integrated light sensor that adjusts the screen backlight according to ambient light.

• others

- Frequency range from 9 kHz to 3.6 GHz - Displays an average noise level of 150dBm - Phase noise -85dBc/Hz at 1GHz, offset at 10kHz - Overall amplitude accuracy <1.5dB - Minimum resolution bandwidth (RBW) of 10Hz - EMI pre-compliance test kit - 1.5 GHz tracking generator kit - 10.4-inch display

• others

<Excellent Operability> - 10.1-inch display with a resolution of 1024x600 - Capacitive touchscreen that supports multi-touch gestures, allowing efficient movement or scaling of traces with finger touches - Built-in web server supports remote control of LAN ports using a web browser. <High Resolution and Low Noise> By combining 10-bit mode and zoom, waveform noise is displayed in greater detail. The vertical and horizontal zoom functions of the SDS2000X Plus allow users to select areas and enlarge captured signals for more detailed analysis. <Power Loop Response Analysis (Board Plot)> Stability is a very important metric in power supply design. Generally, stability measurements require a special frequency response analyzer, which is very expensive. Siglent offers an affordable solution. <Measurement of Parameters and Parameter Statistics> Parameter measurements fall into four categories: horizontal, vertical, other, and channel delay, allowing for a total of over 50 types of measurements.

• Other measuring instruments

The LF Personal Monitor WaveMon LF-400 monitors magnetic fields from DC and 10Hz to 400KHz. 【Main Features】 - Data logger - Relative value display design that is easy for the wearer to see - Six-level alarm LED display, alarm sound, vibration - Compliance with international standards - ICNIRP, 2013/35/EU, IEEE standards With a user-friendly design, it is gaining popularity worldwide, especially in Europe. 1. Display design that is easy for the wearer to see 2. Arm belt included 3. Ergonomic body design 4. Compact at just 194g 5. Three types of alarm methods: LED, sound, vibration 6. GPS, altimeter (optional)

• Other measuring instruments
• Environmental Survey
• Other analytical equipment

The CIT-10 is equipped with functions such as a function generator, signal generator, RF millivoltmeter, and RF amplifier in a compact single unit for conducting immunity tests compliant with the IEC/EN 61000-4-6 standard. With GUI software for system control, it allows for easy self-calibration and CDN calibration, and it is also capable of automatically measuring test contents in accordance with the standard.

• others

The SIGLENT SSG3000X series signal generators have a frequency range of 9 kHz to 2.1 GHz / 3.2 GHz. They provide standard analog modulation such as AM, FM, and PM. Additionally, when used with baseband generators like the SDG6000X, they can generate IQ modulated signals. The SSG3000X series, with its high precision and pure output, is ideal for research and development, education, and manufacturing.

• others

Model: TBTC0 Length: 390 mm Width: 100 mm Height: 62 mm Septum Height: 28 mm Rectangular Area Under Septum: 19 cm x 7 cm x 2.8 cm TEM Cell Connector: N-Female Nominal Cell Impedance: 50 Ohm Wave Impedance: 377 Ohm Maximum RF Input Power: 10W (limited by supplied 50 Termination) Input Return Loss: S11 Maximum 3.15GHz < -15dB Wave Loss: Maximum 3GHz < 3dB, Maximum 6GHz < 4dB

• Other measuring instruments

The eoProbe is a photoelectric field sensor that measures one axis based on electro-optical technology (the Pockels effect). This ultra-broadband sensor enables accurate measurements in almost any location and environment (air, liquid, gas, vacuum) under harsh conditions. The Kapteos system has achieved innovative electric field measurements through the electro-optical probe eoProbe and the high-end converter eoSense, utilizing this Pockels effect. Its measurement performance exceeds several MV/m, providing ultra-high bandwidth from 40 Hz to over 100 GHz and the most advanced features in extremely harsh environments such as underwater. <Comprehensive Measurement of Electric Field Vectors> The Pockels effect based on electro-optical technology allows for the measurement of the three components and phase of the vector electric field. Additionally, by using two types of probes, longitudinal and transverse, in conjunction with the eoSensor converter, it is possible to accurately identify and measure the three-axis vector. <Non-Invasive Measurement> The active components of the sensor, which do not use metal parts, are essentially crystals. The measurement signals are transmitted by a laser within a fiber optic link. Electric field measurements inside animal tissues in MRI systems, as well as inside fruits or vegetables, are also possible.

• Analysis and prediction system
• Other measuring instruments
• Environmental Survey

【Product Overview】 The MonitEM-Lab indoor EMF monitor has been specially developed for laboratories, working centers, industries, military, and airport facilities. It is optimized for high-frequency applications such as future 5G bands. 【Key Features】 ★ 24/7 Monitoring: Continuous monitoring 24 hours a day, 365 days a year ★ Alarms: Real-time audible and visual alarms ★ Wideband Measurement: Easy indoor RF monitoring of human exposure ★ Compliant with ITU-T K.83 ★ Control Center: Software for system management (optional) 【Compatible Probes】 E-Field: WPF3, WPF6, WPF8, WPF18, WPF40 H-Field: WPH1000

• Other measuring instruments

The SDS5000X series features Siglent's SPO technology with a maximum waveform capture rate of up to 110,000 wfm/s (up to 480,000 wfm/s in normal mode and sequence mode), 256 levels of brightness grading display capability, and a color temperature display mode. It also incorporates an innovative digital trigger system that is highly sensitive and has low jitter.

• Other measuring instruments
• Measurement and analysis equipment leasing and rental

The world's top brand in "RF Safety," Wavecontrol, introduces the portable electromagnetic field monitor WaveMon, now featuring a new personal exposure monitor for 5G frequencies from 1MHz to 60GHz. 【Main Features】 - Equipped with a 3-axis sensor - Isotropic & RMS measurement - Relative value display design that is easy for the user to see - 6-level alarm with LED display, alarm sound, and vibration - Complies with international standards - ICNIRP, EMF Directive 2013/35/EU, FCC, SC6 Designed with the user in mind, it is gaining popularity worldwide, especially in Europe. 1. Display design that is easy for the wearer to see 2. Arm belt included 3. Ergonomic body design for easy grip 4. Compact at just 190g 5. Three types of alarm methods: LED, sound, vibration 6. GPS and altimeter (optional)

• Other measuring instruments
• Environmental Survey
• Other analytical equipment

The 5G next-generation communication networks and autonomous driving technologies in the automotive field, which are being developed for practical use and commercialization in 2020, require measurement technologies for onboard millimeter-wave and sub-millimeter-wave radar. SAF's Spectrum Compact series covers a wide frequency range from 300 MHz to 87 GHz with eight models. Customers can choose the most cost-effective model that best fits their applications. The equipment will not only satisfy standalone measurements in the field but will also meet the needs of serious research and development through standard PC analysis software.

• Environmental Survey
• Other measuring instruments
• Airport facilities

• Frequency range: 10KHz-11GHz • Laser power supply – No charging required • Extremely small size • High resolution, high speed, low noise • Electric field strength 0.1V/m-10kV/m • Wide dynamic range • Continuous real-time data streaming • PC computer interface & software included

• Other measuring instruments

.

• Other measuring instruments
• others

The Vector Signal Generator (Dual Channel Arbitrary Waveform Generator) SDG6000X, in addition to being a function/arbitrary waveform generator, is equipped with high-quality pulse generation capabilities, noise functions, IQ signals, selectable harmonics, PRBS, and other advantages. Other features include inter-channel phase locking, sweep/burst functions, channel tracking/coupling/replication, waveform overlay, and a built-in hardware frequency counter.

• others

A powerful and flexible tool for testing broadcast and RF devices. It offers reliable automated measurements and a wealth of features, including a tracking generator and multiple operating modes.

• others

The ICI 03 L-EFT set is a different set of three types of ICI sources: pulse magnetic field source, pulse electric field source, and pulse current source (FBBI). It enables very high precision and high-resolution IC analysis, and also allows for side-channel analysis, making it possible to test circuits that are critical for security. The features of the ICI 03 L-ET set include a probe tip with very high resolution (capable of testing very small areas) and a very low trigger for pulse jitter (destruction at specific points in the program sequence).

• Other measuring instruments

The world's top brand in "RF Safety," Wavecontrol, presents the portable electromagnetic field monitor WaveMon, designed to continuously ensure the safety of workers operating in strong electromagnetic fields and surrounding areas. This lightweight and compact monitor weighs only 190g and continuously monitors electromagnetic field exposure. **Main Features** - Equipped with a 3-axis electric and magnetic field sensor - Isotropic & RMS measurement - Relative value display design that is easy for the wearer to see - 6-level alarm with LED display, alarm sound, and vibration - Complies with international standards - ICNIRP, European Directive 2012/35/EU, FCC, SC6 relative values With a user-friendly design, it is becoming widely adopted around the world, especially in Europe. 1. Display design that is easy for the wearer to see 2. Arm belt included 3. Ergonomic body design for easy grip 4. Compact at just 190g 5. Three types of alarm methods: LED, sound, vibration 6. GPS (optional)

• Other measuring instruments
• Environmental Survey
• Other analytical equipment

The high voltage coil impulse tester IWT-10KV provides a 10,000VDC impulse voltage and a high-speed sampling rate of 100MHz. It is designed to ensure the quality of coils, particularly in the inductance range of 50μH to 50H, such as high-output inductors, transformers, and stator coils. The IWT-10KV can easily detect issues such as insulation failures and insufficient rotation caused by winding materials, winding processes, frames, and magnetic materials by comparing the waveforms of the master sample and the DUT. 【Main Specifications】 ■ Wide inductance measurement range: 50μH-50H ■ Programmable low-energy impulse voltage from 500V to 10,000V ■ 100MHz high sampling rate ■ Simple & rapid inspection with 4 waveform comparison method ■ Best waveform analysis with ultra-low voltage measurement steps ■ Accessories: High voltage test line cable, power cord, user manual, USB interface cable, RS232C cable, CD-ROM

• Electrical Equipment Testing
• Other measuring instruments
• others

The IWT-1000A is an impulse winding tester specially designed for ultra-low inductance coil measurement, providing programmable impulse voltages from 10V to 1000V. The measured inductance range is from 0.1μH to 50mH, covering almost all types of coils, including high output inductors, transformers, and wireless charger coils. 【 Main Specifications 】 ■ Ultra! Low inductance measurement range: 0.1μH ■ 10V to 1000V programmable impulse ■ High sampling rate ■ Simple & quick testing with 4 waveform comparison method ■ Best waveform analysis with ultra! low voltage measurement steps

• Electrical Equipment Testing
• Other measuring instruments
• others

【Features】 - WiFi 2.45GHz frequency probe - Isotropic & true RMS measurement - High sensitivity 0.04V/m - High out-of-band attenuation - Electric field

• Other measuring instruments