日本マグネティックス List of News Articles

■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ Product News! Heat-resistant Rod Magnet ■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ Heat resistance temperature 200℃, demonstrating high magnetic strength even in high-temperature environments! The rod magnet known as a semi-heat-resistant rod magnet (Nd type) typically has a maximum operating temperature of 120 to 150℃. When returned to room temperature, it recovers its original magnetic strength, but the magnetic strength decreases more than expected in that environment. In contrast, the Sm type heat-resistant rod magnet has the advantage of less magnetic strength reduction. 【Features】 ■ Less magnetic strength reduction even in high-temperature environments. ■ Cost reduction compared to conventional products. 【Specifications】 ■ Heat resistance temperature 200℃ ■ Surface magnetic strength: φ24.2 specification 11,000 Gauss / φ25 specification 10,000 Gauss

■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ Product News! Suspended Rectangular Rod Magnet ■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ 【Patent Obtained!】 It collects weak magnetic foreign objects by suspending it above films, foils, and papers. Although rod magnets have a high surface magnetic flux density, the magnetic flux lines do not extend far, causing the magnetic flux density to drop sharply just a few millimeters away from the surface of a pipe. Therefore, using them suspended or hanging did not yield significant effects. We have developed a suspended rectangular rod magnet for the removal of fine iron powder that maintains a high magnetic flux density even when suspended above the conveyed items at a certain distance. (Patent No. 5865321) 【Features】 ■ It does not damage the product as it removes foreign objects while maintaining a certain distance. ■ While rod magnets have varying magnetic strength along their length, the SSB type has a surface magnetic strength of 10,000 Gauss (1.0 Tesla) along its length, allowing it to collect magnetic foreign objects regardless of the point it passes through.

■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ Product News! Pipe Surface 15,000 Gauss Rod Magnet ■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ The "Pipe Surface 15,000 Gauss Rod Magnet" can be easily installed in narrow areas such as raw material drop points and discharge points on the manufacturing line. 【Features】 ■ Can be used in liquid environments due to stainless steel pipe construction. ■ We manufacture rod magnets with a surface magnetic force of up to 15,000 Gauss. ■ Custom sizes can be made to your specifications in 1mm increments. ■ Inspection certificates with magnetic force notation can be provided for HACCP, ISO, and other compliance measures. ■ Processing options such as ion nitriding, tungsten spraying, and Teflon coating are available for the pipe surface. ■ Options for eye bolts and handles are also available. 【Specifications】 ■ Super high magnetic type (15,000, 14,000), high magnetic type (12,000), standard type (10,000), heat-resistant type (10,000), ferrite type (φ25, φ32) available. ■ Pipe materials: SUS304, SUS316L, titanium. ■ Tapping and male thread processing are also possible. Standard tap specifications are M6, M8 (depth 12mm).

■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ Product News! Electromagnetic Mag Hammer ■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ It eliminates adhesion, clogging, rat holes, arching, and bridging that occur in hopper shoots, ducts, tanks, etc.! The "Electromagnetic Mag Hammer," a hammering device for removing adhered powders and preventing clogging, utilizes the energy of an electromagnet to move the piston rod at high speed, delivering powerful impacts to resolve adhesion of powders within equipment such as hoppers and to break bridges. No air is required, and it can be used with alternating current (3-phase 200V), with minimal loss of impact force even at distances of up to 100m between the Mag Hammer and the dedicated control panel. 【Features】 ■ Automatic operation is possible with settings for continuous strikes and rest periods. ■ It allows for concentrated strikes (up to 10 times), which is highly effective for removing adhesion. ■ Automatic operation is possible via external linkage signals. ■ It can be used in high-temperature equipment (up to 300°C, with ambient conditions up to 40°C) (special: high-temperature specification). ■ It can be manufactured entirely from stainless steel (special: corrosion-resistant specification).

■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ Product News! Electromagnetic Separator CG-mini Type ■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ Suitable for the removal of weak magnetic materials and trace iron powder! Demonstrates a core magnetic flux density of over 16,000 Gauss! Removes iron powder and fine iron powder mixed in liquids using a magnetized filter. Can also be used for relatively high-temperature substances and slurries. Due to the passage of raw materials through dozens of highly effective magnetic filters, it is capable of removing fine iron powder down to a few microns. Additionally, the mesh opening of the magnetic filter can be adjusted according to the material being processed! 【Features】 1. Demonstrates a core magnetic flux density of over 16,000 Gauss! 2. Removes and recovers all magnetic materials in liquids and slurries with high magnetic force! 3. Can alleviate labor shortages when used in conjunction with an automatic cleaning device. 4. Improves cooling efficiency and reduces magnetic force decline during heating.

■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ Product News! Electromagnetic Separator CG-mini Type ■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ A size that can be installed in places where it was previously impossible! Overwhelming foreign object recovery power that cannot be compared to permanent magnet types! 【Features】 1. Volume ratio 75% / Installation area ratio 65% / Magnetization power 50% / Weight 75% 2. Now available in a size that can be installed in places where it was previously impossible. 3. Overwhelming foreign object recovery power that cannot be compared to permanent magnet types! 【Specifications】 1. Air-core magnetic force 3,300 GAUSS 2. Various screens can be adopted *For details, please download the PDF or contact us.

■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ Product News! Electromagnetic Separator CG-X Type ■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ The CG-X type electromagnetic separator is the most efficient model for removing fine iron powder from bulk materials, widely adopted not only in the food industry but also in chemicals, plastics, ceramics, pharmaceuticals, and more. 【Features】 1. Generates a separation magnetic field (when screen is set) of over 18,000 gauss. 2. Can use honeycomb-shaped screens (patented). 3. Achieves a core magnetic flux density of over 15,000 GAUSS (when cold). 4. In the case of the chiller unit (optional) specification, it is possible to suppress the current drop rate during heating and maintain a stable high magnetic force.