日本マグネティックス List of Products and Services

The large ceiling fan "BladeTec FAN" delivers a pleasant breeze to spacious areas of up to 2000 square meters, creating a comfortable environment. It has already achieved a record of 140,000 units worldwide and 1,000 units domestically. In addition to preventing heat-related illnesses, it significantly improves the efficiency of heating and cooling, leading to substantial energy savings. Using multiple small high-speed fans can cost 5 to 7 times more than using a single BladeTec FAN, and frequent maintenance is required, which can lead to safety issues for employees and visitors. Large ceiling fans help create a safe and low-stress workplace environment from both cost and safety perspectives! 【Features】 ■ Powerful even in large spaces The fan can deliver air up to 29 meters away in all directions from its center, allowing facilities to achieve both energy savings and comfort even in wide areas. ■ High efficiency and energy-saving The power savings can be just a few tens of yen per hour! It is possible to switch from 20 floor-standing or wall-mounted high-speed fans. *The website has been renewed! For more details, please click on "Large Ceiling Fan HP Renewal!"

• Air conditioning equipment

Here is an introduction to the installation example of the fabric duct system "DuctSox." This system is designed to evenly distribute air at low speeds only to the living areas where cooling and heating are needed, positioned at a low height. On the other hand, in the previous Walmart locations in the southern region, metal ducts and outlets were placed near the ceiling, requiring a cooling capacity of 450 tons. However, the Walmart experimental supercenter where the installation was carried out was able to manage with 380 tons. According to the designer, the annual reduction in power consumption amounts to 600,000 kWh/h, which is equivalent to the annual electricity usage of 60 households. [Installation Example] ■ Installation Location: Walmart Experimental Supercenter (McKinney, Texas) ■ Effect: Previously required a cooling capacity of 450 tons, but was able to manage with 380 tons. *For more details, please refer to the PDF document or feel free to contact us.

• Duct related equipment

We would like to introduce the design of 'DuctSox', a fabric duct system. This system allows for the free design of text and illustrations. Due to partial zipper connections, it can be greatly utilized for advertisements and more. 【Color Options】 ■ One Color (Single Color) Includes text and a simple single-color logo or image. ■ Full Color (Multicolor) Includes full-color logos and images. *For more details, please refer to the PDF materials or feel free to contact us.

• Duct related equipment

"Scale Core" is a newly developed product by DuctSox that solves the issue of "deflation" in fabric duct systems. Even when air supply is stopped, it maintains a taut and sufficiently inflated circular shape. It has an attractive appearance, and wrinkles are hardly noticeable. Additionally, it prevents flapping at the start of operation when inflating. 【Features】 ■ Maintains a taut and sufficiently inflated circular shape even when air supply is stopped ■ Attractive appearance with minimal noticeable wrinkles ■ Prevents flapping at the start of operation when inflating ■ Easily retrofitted from conventional hanging systems ■ Installation time is shorter than for two-row hanging systems, and it can be easily inserted into the duct *For more details, please refer to the PDF document or feel free to contact us.

• Duct related equipment

We would like to introduce the fiber materials (fabric) of "DuctSox." This product is a fabric duct system that can improve heating and cooling efficiency compared to existing metal ducts. Since it has a framework, it can maintain a non-collapsed state even when not filled with air. 【Fiber Materials (Fabric)】 ■ Premium Grade - Sedona Xm (Se) - Tuftex (Tu) ■ Standard Grade - Velona (Ve) - Duratex (Du) ■ Special Grade - Micro-BX (Mi) - StutX (St) *For more details, please refer to the PDF document or feel free to contact us.

• Duct related equipment

We would like to introduce the installation accessories for the fabric duct system "DuctSox." The "cable suspension method" is simple, economical, and can be used with all types of fabric. It consists of cables, turnbuckles, and mounting hardware. The "aluminum U-track suspension method" features openings at the top and bottom, making vertical suspension from the top easy and ensuring secure installation of the DuctSox from the bottom. 【Suspension Methods】 ■ Cable Suspension Method ■ Aluminum U-Track Suspension Method *For more details, please refer to the PDF document or feel free to contact us.

• Duct related equipment

We will introduce the selection of the system for the fabric duct system "DuctSox." This system consists of four parts: selection of shape, determination of airflow characteristics (model), selection of fiber material, and selection of hanging method. 【Four Components】 1. Selection of DuctSox shape 2. Determination of airflow characteristics (model) 3. Selection of fiber material 4. Selection of hanging method *For more details, please refer to the PDF document or feel free to contact us.

• Duct related equipment

We will introduce the maintenance of the fabric duct system "DuctSox" during its usage period. Cleaning metal ducts incurs significant costs and time, which can be a major drawback. Neglecting cleaning can lead to health issues such as sick house syndrome. On the other hand, our product can be easily separated into smaller parts by removing the zipper, allowing for vacuuming or washing in a washing machine. Additionally, the special fabric fibers do not absorb moisture, which can be a source of bacteria and mold. It prevents fiber deterioration and damage, resulting in a longer product lifespan and less maintenance. 【Features】 ■ Can be vacuumed or washed in a washing machine ■ Special fabric fibers do not absorb moisture, which can be a source of bacteria and mold ■ Long product lifespan *For more details, please refer to the PDF document or feel free to contact us.

• Duct related equipment

"DuctSox" is a duct system designed for small, lightweight packaging (cardboard), which reduces transportation costs and minimizes damage. Labor costs for installation can be reduced by 87%. With lightweight and a variety of fittings, significant reductions in construction time can be achieved. Costs are 20-80% lower compared to metal ducts. [Features] - Small, lightweight packaging (cardboard) - Reduced transportation costs - Decreased damage - Labor costs for installation can be reduced by 87% - A variety of lightweight fittings available *For more details, please refer to the PDF document or feel free to contact us.

• Duct related equipment

The fabric duct system "DuctSox" can uniformly blow air from all areas of the duct, allowing for sufficient mixing of the blown air and indoor air, creating a comfortable space. Additionally, it can efficiently supply air to the space, significantly simplifying the design of the air supply system. Since it is composed of a variety of fittings connected by zippers, not only the design but also the construction time can be greatly reduced. 【Features】 ■ Excellent blowing characteristics Can uniformly blow air from all areas of the duct Sufficient mixing of blown air and indoor air is possible ■ Simplification of design and construction The design of the air supply system is significantly simplified Both design and construction time are greatly reduced *For more details, please refer to the PDF materials or feel free to contact us.

• Duct related equipment

The "Fabric Duct Air Supply System" is a newly developed air duct made of fabric (special fibers), serving as an alternative to metal ducts for air conditioning systems. There is no occurrence of condensation or rust, which are common with metal ducts. Compared to metal ducts, it allows for easier uniform air conditioning management, and it has been proven through a two-year experiment at Iowa State University that the time to reach the set temperature is approximately 24% faster—resulting in savings on electricity costs! 【Features】 ■ Uses flame-retardant special fibers ■ Low cost due to fabric material ■ Significant reduction in installation costs is possible ■ No occurrence of condensation or rust, as seen with metal ducts ■ Easier uniform air conditioning management compared to metal ducts *For more details, please refer to the PDF materials or feel free to contact us.

• Duct related equipment

The "Fully Automatic Can-Specific Press Machine ACP-100-2" is fully automatic and easy to operate. Due to its powerful pressing force, it can work in a short cycle, and its compact design saves space. 【Features】 ■ Comes with a dedicated control panel ■ Can be combined with an automatic supply hopper (optional)

• others

The "Magnet Pulley Type Empty Can Simple Separator ABC Model" uses a powerful permanent magnet to perfectly sort steel cans, aluminum cans, rubber, glass, and more. By adding a belt speed change inverter as an option, it can be used in conjunction with manual sorting. Additionally, it can be combined with a mobile hopper and a bag opening station. 【Features】 ■ Sturdy and lightweight, easy to handle ■ Equipped with movable wheels, allowing for flexible installation ■ Power supply is compatible with 220/200V, 50/60Hz, and has low electricity consumption ■ Further rational processing is possible when used in conjunction with an aluminum separator.

• others

The aluminum sorting machine (non-ferrous sorting machine) is designed for crushed materials, and by using it in conjunction with a vibrating feeder, it can supply raw materials in a controlled manner, thereby enhancing sorting efficiency. 《It excels in the following areas!》 ■ In bulky waste crushing lines Efficiently sorting and recovering aluminum and other materials from crushed municipal waste. ■ For recovering conductors from glass cullet Streamlining the recovery and sorting of valuable metals contained in glass cullet. ■ In aluminum casting sand processing lines Demonstrating power in recovering aluminum pieces in aluminum shell sand recycling lines. ■ For sorting aluminum cans and steel cans Automatically recovering aluminum and steel cans from collected waste at stations and highway service areas. ■ For recovering aluminum from PET bottles Efficiently sorting and recovering aluminum contained in PET bottles. ■ For sorting nails in pachinko machines ■ For recovering other conductors.

• others

The aluminum sorting machine (non-ferrous sorting machine) can supply raw materials in a fixed quantity by using it in conjunction with a vibrating feeder, thereby enhancing sorting efficiency. We offer two models tailored to the size of the materials: the ALS-L type for relatively large objects and the ALS-S type for crushed materials. 《Here’s where it excels!》 ■ In bulky waste crushing lines Efficiently sorts and collects aluminum cans from crushed municipal waste. ■ For recovering conductors from glass cullet Streamlines the recovery and sorting of valuable metals contained in glass cullet. ■ In aluminum casting sand processing lines Demonstrates its power in recovering aluminum pieces in aluminum shell sand regeneration lines. ■ For sorting aluminum and steel cans Automatically collects aluminum and steel cans from waste collected at stations and highway service areas. ■ For recovering aluminum from PET bottles Efficiently sorts and collects aluminum contained in PET bottles. ■ For sorting nails in pachinko machines ■ For recovering other conductors.

• others

"Blade Tec FAN" combines air conditioning and ceiling fans to achieve significant energy savings without compromising comfort! Compared to other products, it can create a larger airflow. Additionally, by lowering the effective temperature, it contributes to increased productivity. By mixing the warm air that accumulates near the ceiling with the cold air near the floor during winter, it creates a more comfortable temperature! 【Features】 ■ Effective even in large spaces It can deliver air up to 29 meters away in all directions from the center of the fan, allowing you to achieve both energy savings and comfort even in large facilities. ■ High efficiency and energy saving The power consumption per hour is just a few tens of yen! It can switch between 20 floor-standing and wall-mounted high-speed fans. ■ Energy saving in winter It collects the warm air near the ceiling and pushes it downwards in a conical shape, while the air spreads horizontally in all directions from the floor. * Up to approximately 30% energy savings are possible! * For more details, please download the PDF document or feel free to contact us.

• Air conditioning equipment

The "Blade Tec FAN" combines air conditioning and ceiling fans to achieve significant energy savings without compromising comfort! Compared to other products, it can create a larger airflow. Additionally, by lowering the effective temperature, it contributes to increased productivity. By mixing the warm air that accumulates near the ceiling with the cold air near the floor during winter, it creates a more comfortable temperature! 【Features】 ■ Powerful even in large spaces It can deliver air up to 29 meters away in all directions from the center of the fan, allowing you to achieve both energy savings and comfort even in large facilities. ■ High efficiency and energy-saving The power consumption per hour is only a few tens of yen! It can switch between 20 floor-standing and wall-mounted high-speed fans. ■ Energy savings in winter It collects the warm air near the ceiling and pushes it downwards in a conical shape, while the air spreads horizontally in all directions from the floor. * Up to approximately 30% energy savings are possible! * For more details, please download the PDF materials or feel free to contact us.

• Air conditioning equipment

The rod magnet known as "heat-resistant rod magnet (Nd series)" typically has a maximum operating temperature of 120 to 150°C. When returned to room temperature, it recovers its original magnetic strength, but in that environment, the magnetic strength decreases more than expected. In contrast, the Sm series heat-resistant rod magnets have the advantage of less magnetic strength reduction. 【Features】 ■ Minimal magnetic strength reduction even in high-temperature environments. ■ Cost reduction compared to conventional products. 【Specifications】 ■ Heat resistance temperature: 200°C ■ Surface magnetic strength: φ24.2 specification 11,000 Gauss / φ25 specification 10,000 Gauss

• others

While bar magnets have a high surface magnetic flux density, the magnetic flux lines do not extend far, causing the magnetic flux density to drop sharply just a few millimeters away from the surface of a pipe. Therefore, using them suspended or hanging did not yield significant effects. We developed a suspended rectangular bar magnet for the removal of fine iron powder that maintains a high magnetic flux density even when suspended above the transported items at a certain distance. (Patent No. 5865321) 【Features】 ■ It does not damage the product as it removes at a constant distance. ■ Although bar magnets have varying magnetic strength along their length, the SSB type has a surface magnetic strength of 10,000 Gauss (1.0 Tesla) along its length, allowing it to collect magnetic foreign substances regardless of the point it passes through.

• others

The "Pipe Surface 15,000 Gauss Rod Magnet" can be easily installed in narrow areas such as raw material drop points and discharge points on the manufacturing line. It can be produced in dimensions according to your specifications, in 1mm increments. 【Features】 ■ Can be used in liquids due to the stainless steel pipe. ■ We manufacture rod magnets with a surface magnetic force of up to 15,000 Gauss. ■ Custom dimensions can be produced in 1mm increments. ■ It is possible to provide an inspection report with magnetic force notation for HACCP, ISO, and other compliance measures. ■ Surface treatments such as ion nitriding, tungsten spraying, and Teflon coating can also be applied to the pipe surface. ■ Options for eye bolts and handles are available. 　※ The 15,000 Gauss specification is a nominal value. 【Specifications】 ■ Super high magnetic force type (15,000, 14,000), high magnetic force type (12,000), standard type (10,000), heat-resistant type (10,000), ferrite type (φ25, φ32) available. ■ Pipe materials: SUS304, SUS316L, titanium. ■ Tapping and male thread processing are also possible. Standard tap specifications are M6, M8 (depth 12mm). 　※ Other than standard taps are also possible.

• others

The "Electromagnetic Mag Hammer," a hammering device designed to remove adhered powder and prevent clogging, utilizes the energy of an electromagnet to move the piston rod at high speed, delivering powerful impacts to the powder adhered inside equipment such as hoppers and to bridges, thereby resolving the issues. It does not require air and can be used with alternating current (3-phase 200V), maintaining nearly the same impact force over distances of up to 100 meters between the Mag Hammer and the dedicated control panel. 【Features】 - Automatic operation is possible with settings for continuous strikes and rest periods. - It allows for concentrated strikes (up to 10 times), which is highly effective for removing adhered materials. - Automatic operation can be triggered by external interlock signals. - It can be used in high-temperature environments (up to 300°C, with ambient conditions up to 40°C) (special: high-temperature specification). - It can be manufactured entirely from stainless steel (special: corrosion-resistant specification). - CE mark compliant products can be manufactured (special: CE specification).

• others

The "Electromagnetic Mag Hammer," a hammering device designed to remove adhered powder and prevent clogging, utilizes the energy of an electromagnet to move the piston rod at high speed, delivering powerful impacts to eliminate powder adhesion in equipment such as hoppers and to break bridges. 【Features】 ■ No air is required, and it can be used with AC (3-phase 200V). ■ It has a completely sealed structure, allowing for use in outdoor or harsh environments. ■ A striking count of 2 million times is guaranteed (however, the SIC-3A model is guaranteed for 1 million times). ■ It has a proven track record of exceeding 5 million strikes, demonstrating high durability. ■ No maintenance is required up to the guaranteed number of strikes. ■ The impact force does not significantly decrease even at distances of up to 100m from the Mag Hammer to the dedicated control panel. ■ The impact force can be easily adjusted using the knob on the control panel.

• others

Remove iron powder and fine iron powder mixed in the liquid using magnetized magnetic filters. It can also be used for relatively high-temperature substances and slurry-like materials. Since dozens of magnetic filters with high de-ironization effects allow the raw materials to pass through, it is possible to remove fine iron powder of several microns. Additionally, the magnetic filter can have its mesh opening adjusted according to the material being processed! 【Features】 1. Achieves a core magnetic flux density of over 16,000 Gauss! 2. Removes and recovers all magnetic materials in liquids and slurries with high magnetic force! 3. Can be used in conjunction with an automatic cleaning device to alleviate labor shortages. 4. Improves cooling efficiency and reduces magnetic force decline during heating.

• others

【Features】 1. Volume ratio 75% / Installation area ratio 65% / Magnetizing power 50% / Weight 75% 2. The size has been made suitable for installation in areas that could not be installed before. 3. An overwhelming foreign matter recovery capability that cannot be compared to permanent magnet types! 【Specifications】 1. Air core magnetic force 3,300 GAUSS 2. Various screens can be adopted *For details, please download the PDF or contact us.

• others
• others

The electromagnetic separator CG-X type is the most efficient model for removing fine iron powder from powders, widely adopted not only in the food industry but also in chemicals, plastics, ceramics, pharmaceuticals, and more. 【Features】 1. Generates a separation magnetic field (when screen set) of over 18,000 Gauss. 2. Can use honeycomb-shaped screens (patented). 3. Exhibits a core magnetic flux density of over 15,000 Gauss (when cold). 4. In the case of a chiller unit (optional), it is possible to suppress the current reduction rate during heating and maintain a stable high magnetic force. *For more details, please download the PDF or contact us.

• others
• others

The "Blade Tec FAN" combines air conditioning and ceiling fans to achieve significant energy savings without compromising comfort. It provides comfort and efficiency around the world! Here are some examples from companies that have actually used it. Example 1) In an aircraft hangar in Florida, USA, technicians were able to work comfortably, and it also prevented birds from nesting on the airplanes. Example 2) In a food distribution warehouse in Wisconsin, USA, the temperature difference between the floor and ceiling was eliminated, preventing food spoilage. Example 3) In a metal recycling plant in Alabama, USA, expensive metals no longer developed rust. Example 4) In a flower shop in Amsterdam, Netherlands, eliminating cold spots in the storage facility prevented flowers from wilting. Example 5) In a drive-thru facility for a beverage wholesaler in Minnesota, USA, exhaust fumes from loading trucks were prevented from stagnating. Example 6) In a wholesaler in Nevada, USA, the number of evaporative coolers was reduced by half during the summer. *For more details, please download the materials.

• Air conditioning equipment

The "Blade Tec FAN" combines air conditioning and ceiling fans to achieve significant energy savings without compromising comfort! Using multiple small high-speed fans costs 5 to 7 times more than using a single Blade Tec FAN. These small high-speed fans also require frequent maintenance and pose safety issues for employees and visitors. Blade Tec helps create a safe and low-stress work environment with two designs: Industrial and Commercial! 【Features】 ■ Powerful even in large spaces It can deliver air up to 29 meters in all directions from the center of the fan, allowing you to achieve both energy savings and comfort even in large facilities. ■ High efficiency and energy-saving The power savings per hour is just a few tens of yen! It can switch between 20 floor-standing and wall-mounted high-speed fans. *For more details, please download the PDF document or feel free to contact us.

• Air conditioning equipment

The "Blade Tec FAN" combines air conditioning and ceiling fans to achieve significant energy savings without compromising comfort! The high-volume, low-speed (HVLS) fan is designed to efficiently circulate air within the premises. With optimized low-speed rotation, BladeTec fans are designed to move more air across the largest areas at the lowest cost. This results in the highest level of cooling capability and stratification disruption (the ability to eliminate temperature differences between the floor and ceiling), leading to up to approximately 30% reduction in air conditioning costs. 【Features】 ■ Powerful even in large spaces The fan can deliver air up to 29 meters in all directions from its center, allowing for both energy savings and comfort even in spacious facilities. ■ High efficiency and energy saving Power savings of just a few tens of yen per hour! Capable of switching between 20 floor-mounted and wall-mounted high-speed fans. *For more details, please download the PDF materials or feel free to contact us.

• Air conditioning equipment

The "Blade Tec FAN" combines air conditioning and ceiling fans to achieve significant energy savings without compromising comfort! Compared to other products, it can create a larger airflow. Additionally, by lowering the effective temperature, it contributes to increased productivity. In winter, it mixes the warm air that accumulates near the ceiling with the cold air near the floor to create a more comfortable temperature! 【Features】 ■ Effective even in large spaces It can deliver air up to 29 meters in all directions from the center of the fan, allowing both energy savings and comfort even in large facilities. ■ High efficiency and energy-saving The power consumption per hour is just a few tens of yen! It can switch between 20 floor-standing and wall-mounted high-speed fans. ■ Winter energy savings It collects the warm air near the ceiling, pushes it downward in a conical shape, and then spreads the air horizontally in all directions from the floor. * Up to approximately 30% energy savings are possible! * For more details, please download the PDF document or feel free to contact us.

• Air conditioning equipment

The "Blade Tec FAN" combines air conditioning and ceiling fans to achieve significant energy savings without compromising comfort! Compared to other products, it can create a larger airflow. Additionally, by lowering the effective temperature, it contributes to increased productivity. The power consumption for one hour is just a few tens of yen, allowing you to reduce electricity costs during the summer! 【Features】 ■ Powerful even in large spaces It can deliver air up to 29 meters in all directions from the center of the fan, so even in large facilities, you can achieve both energy savings and comfort. ■ High efficiency and energy-saving The power consumption for one hour is just a few tens of yen! It is possible to switch between 20 floor-standing and wall-mounted high-speed fans. ■ Summer energy savings When used in conjunction with air conditioning, you can set the air conditioner 2°C higher and still enjoy the same level of comfort as before. *Up to approximately 20% energy savings are possible! *For more details, please download the PDF document or feel free to contact us. *DuctSox is one of the companies under RITE-HITE Holdings.

• Air conditioning equipment

The "Blade Tec FAN" combines air conditioning and ceiling fans to achieve significant energy savings without compromising comfort! Compared to other products, it can create a larger airflow. Additionally, by lowering the effective temperature, it contributes to increased productivity. The fan blades are angled upwards to create a balanced airflow, and the shape of the blades, which taper towards the tip, eliminates the dead air area directly beneath the fan. This allows for comfortable climate control throughout the entire premises. 【Features】 ■ Powerful even in large spaces It can deliver airflow up to 29 meters in all directions from the center of the fan, allowing for both energy savings and comfort even in large facilities. ■ High efficiency and energy-saving Power savings of just a few tens of yen per hour! It can switch between 20 floor-standing and wall-mounted high-speed fans. ■ Summer energy savings When used in conjunction with air conditioning, you can set the air conditioner 2°C higher and still maintain the same level of comfort as before. *Up to 20% energy savings are possible! *For more details, please download the PDF document.

• Air conditioning equipment

The incredible airflow created by 4 blades! BladeTec-Industrial is an HVLS fan designed with four specially calculated blades that can deliver airflow to large spaces, creating a comfortable environment. Additionally, it can move a larger volume of air than any other product (such as HLVS fans with 6 or 8 blades) and can send air up to 29 meters away.

• Air conditioning equipment

The "Electromagnetic Universal Positioner MP7" is a holding fixture for the final finishing of complex shapes such as cast and injection molded products. It securely holds any shape and strongly supports the final finishing of the product! The structure and mechanism involve placing an electromagnet under a container filled with steel balls (Φ0.1mm to 3mm). By turning the electromagnet ON, the steel balls become magnetized and firmly hold the workpiece in place. 【Features】 ■ Securely holds any shape with magnetized steel balls (φ0.1 to 3mm) ■ Easy to hold and detach with the ON/OFF switch *For more details, please download the PDF or contact us.

• others

The "High Magnetic Force Drum Magnetic Separator Stainless Steel Drum Separator HGM-D" is a high magnetic force magnetic drum separator that removes stainless steel foreign objects (such as bolts and nuts). It exhibits 9000 gauss (vertical pole) on the drum surface, making it possible to sort SUS-made bolts and nuts that could not be separated before. 【Features】 ■ Widely used in resource recycling, woodworking, mining, ceramics, chemicals, food, etc. ■ Achieves 9000 gauss (vertical pole) on the drum surface! ■ Capable of sorting SUS-made bolts and nuts that could not be separated before. *For more details, please download the PDF or contact us.

• others

By attaching it to the forklift's forks, you can easily collect scattered metal shavings, grinding dust, nails, bolts, and more within the factory. Labor-intensive tasks that used to take hours can now be completed in no time, which also helps prevent flat tires on trucks and other vehicles. 【Features】 ■ The strong magnetic force allows for the collection of small metal scraps like shavings. ■ Since it is operated with a forklift, it significantly reduces working time. 【Specifications】 ■ Comes with a dedicated receiving platform. ■ Custom manufacturing to fit your forklift is also possible. *For more details, please download the PDF or contact us.

• others

The removal and collection of magnetic foreign substances from powders was previously done manually, but we have developed a lattice-type magnet that can perform the cleaning process automatically. By setting the cleaning cycle on the control panel, it can clean automatically, providing strong support for alleviating labor shortages and reducing labor costs. 【Features】 ■ It has a double-tube structure and uses an air cylinder to automatically extract the bar magnet and perform cleaning. ■ It can be installed in areas that cannot be cleaned by hand, and by automating processes, it can resolve labor shortages. ■ Comes with a dedicated control panel. *For more details, please download the PDF or contact us.

• others

The magnet rotates to prevent clogging of the raw materials while recovering iron content. We also manufacture a Heller connection type. 【Specifications】 ■ Connection sizes: 100A, 125A, 150A, 200A, 250A, 300A ■ The number and type of bar magnets can also be specified. *For more details, please download the PDF or contact us.

• others

The lifting magnet that combines permanent magnets and electromagnets instantly becomes a permanent magnet by being energized during adhesion and release, consuming less than one-fifth the power of conventional electromagnetic lifting magnets. 【Features】 ● There is no worry about coil burnout due to continuous use or forgetting to turn off the switch. ● After energization, the adhesion is maintained by the permanent magnet, ensuring that the transported items do not fall even during a power outage, providing excellent safety. ● Since an uninterruptible power supply is not required, costs for battery replacement and regular inspections can be reduced. ● It generates strong magnetic force through the combination of alnico magnets and neodymium magnets. ● Compared to conventional electromagnetic lifting magnets that only use alnico magnets, the lifting capacity has dramatically increased.

• others

Metal foreign substances of a few microns that could not be removed by permanent magnet separators can be removed by electromagnetic separators down to the PPB and PPM levels. It has been specially developed for powders, allowing for the efficient removal of fine iron powder by passing through a magnetized screen. Since it uses electromagnets, metal foreign substances can be recovered when the power is turned off. There are also magnetic filters available for liquid and slurry materials. 【Features of the CG Type Electromagnetic Separator】 ■ Removes magnetic substances of a few microns with a magnetized screen ■ Usable even with materials that have poor fluidity ■ Minimal entrapment of materials *For more details, please download the PDF or contact us.

• others
• others