ニュージャパンヨット List of Products and Services

● The cover lens is a frosted cover that allows the LED particles to be seen through it. ● Please use it together with the dedicated end caps and mounting brackets. * LED tape lights are sold separately. ● The slim and stylish appearance, at just 28mm, enhances the interior space. ● Made of aluminum, it is easy to cut to fit the site.

• LED light source/module

● The cover lens is a uniform light "milky white cover." ● Please use it together with the dedicated end cap. * LED tape light is sold separately. ● The slim design, only 18mm, adds a stylish touch to your interior space. ● Made of aluminum, it is easy to cut to fit the site.

• Other lighting fixtures

● Flexible and easy to install, with a thickness of just 1.3mm. This LED tape light is ideal for background and indirect lighting for furniture and architectural features. ● By narrowing the spacing between LED elements, we achieved a uniform and flat linear light line without "bumps and dips" in brightness. ● Three LEDs can be grouped together and cut at 5cm intervals, allowing for perfectly tailored lighting effects in any installation location. ● There is also a dedicated aluminum profile (2.5m) available that allows for surface mounting, embedding, and corner fitting options. * Please be sure to check the precautions regarding the tape light before use.

• LED light source/module

The accumulator can be incorporated into the piping of a "pump with a pressure switch" to make the flow of water smoother and reduce unpleasant pulsation phenomena. It absorbs sudden pressure changes in the piping when closing the faucet, thereby reducing the load on the pump. Additionally, it provides a smooth and consistent water flow when opening the faucet, resulting in reduced unnecessary power consumption and quieter operation. Furthermore, if there is a water heater or shower, it becomes easier to adjust the temperature.

• others

"Teak Wonder" is not an oil. It is a new teak revival protective sealer that does not contain any oil. Once the thinner evaporates, the remaining components protect the wood from various solvents such as water and light oil, and also delay oxidation. "Teak Wonder" dries to a very clear and transparent state, making the teak slightly brighter than when sanded. Even after a month, it maintains a clear state without attracting dust and dirt. Using two types of liquids, it cleans away the dirt that has penetrated the teak. In just a few minutes, the beautiful "Golden Teak" is revived, looking like new or freshly sanded. Both liquids do not contain harsh chemicals, corrosives, or burning agents, and will not damage rubber products, painted surfaces, or stainless fittings. In addition to the "Combo Pack" that includes 1L of cleaner and brightener, 4L bottle options are also available for each.

• others

●This sealer seals the "pores" of the wood, preventing dust, dirt, and stains from penetrating, while also protecting the natural oils of teak, thereby safeguarding against discoloration and oxidation caused by ultraviolet rays. ●Furthermore, it prevents stains from diesel and fish blood from penetrating the wood, making it easy to clean off dirt. ●It is odorless, non-reflective, non-slippery, and non-sticky, and it also speeds up the drying of wet teak. *Please wash the brush used for application with thinner.

• others

● This is a long-awaited dedicated dodger for Ribecchio owners that protects the cabin entrance from rain, wind, and spray. ● An essential sailing item that is useful regardless of the summer or winter season. Even with a little wind, the sliding hatch can be opened, and the comfort of a cockpit free from spray is irresistible. The difference between having it and not having it is like night and day. ● Made with high weather-resistant and UV-resistant cover fabric. Of course, the fabric is detachable. Additionally, the transparent window section uses "Staglass," which is resistant to fogging, ensuring a comfortable view. ● We have prepared a complete set of plastic rails, fittings, and screws necessary for installation. * However, we recommend hiring a professional for the installation. * This is a made-to-order product. Please place your order with ample lead time.

• others

This is a dedicated dodger that protects the cabin entrance from rain, wind, and spray, eagerly awaited by Esprit owners. ● It is an essential sailing item that is useful in both summer and winter. Even with a little wind, the sliding hatch can be opened, creating a comfortable cockpit that is free from spray. ● Made with high weather resistance and UV-resistant cover fabric. Of course, the fabric is detachable. Additionally, the transparent window section uses anti-fogging "Staglass," ensuring a bright and clear view at all times. ● We have prepared a complete set of necessary plastic rails, fittings, and screws for installation. *However, we recommend that installation be carried out by a professional. *As this is a made-to-order product, please place your order with ample lead time.

• others

vf-dodger Features ● A dedicated dodger that protects the cabin entrance from rain, wind, and spray, eagerly awaited by band fet owners. ● An essential sailing item that is useful in both summer and winter seasons. Even in a bit of wind, you can open the sliding hatch, and the comfort of a cockpit free from spray is irresistible. The difference between having it and not having it is like night and day. ● Made with high weather-resistant and UV-resistant cover fabric. The fabric is, of course, removable. Additionally, the transparent window section uses "Staglass," which is less prone to fogging, ensuring a comfortable view. ● All necessary plastic rails, fittings, and screws for installation are included in the set. * However, we recommend hiring a professional for installation. * This is a made-to-order product. Please place your order well in advance. * Note: For the early models of the band fet that have two winches on each side of the cabin top, you must remove the two outer winches (for the spin sheet) on both sides to install it.

• others

*Since this is a custom-made product, it will take time for delivery. We kindly ask that you inquire in advance or place your order with ample time for delivery.* *For the Esprit du Vent 2, specifically for 30ft boats. However, it is limited to boats with a main sail "E dimension" of 3.0m and equipped with a "single backstay."* *Other types of boats can also be manufactured. Please consult us.* *This is a dedicated bimini top for Esprit, effective not only for cool shade during precious summer sailing but also for rainy cockpits.* *It is a welcome ally that shields against strong sunlight and rain, whether sailing or moored.* *With a simple structure, it is easy to install.* *Please use it under conditions of relative wind speed of 4-5m or less.* *When storing the boat, please be sure to fold it and set it with the included storage cover.*

• others

● The stainless ring mounted on the shaft side and the carbon ring pressed by the bellows hose from the stanch tube are one of the most important parts around the tomo that create a strong water-tight environment through crimping. ● Please be sure to replace it within 2000 hours of use or within 5 years. Also, always check thoroughly for any abnormalities such as water leaks. ● The bellows hose must be filled with water. Always perform "air bleeding" after installation or before operation. For land-based boats, this should be done every time they are launched. (Push the bellows hose towards the propeller side (stern side) to expel a small amount of seawater.) ● The carbon ring incorporated inside the bellows hose and the stainless ring fixed to the shaft are crimped together to prevent water ingress. ● The stainless ring contains two O-rings, allowing for a more secure fixation. * Please be sure to replace the shaft seal within 2000 hours of use or within 5 years. * Note: This is a dedicated replacement part only for yachts manufactured by New Japan Yachts.

• others

● This is a cutlass bearing made from a newly developed material (thermopolymer) specifically designed for areas that are particularly difficult to maintain underwater. ● It absorbs almost no moisture, resulting in an extremely low expansion rate of 0.07%, making it an optimal material for propeller shaft bearings that require high precision. ● Compared to nylon and bronze, it achieves about half the friction coefficient. With its unique "self-lubricating properties," which include lubricants within the material itself, it consistently exhibits excellent low friction characteristics. ● This product is compatible with our boat's 25mm shaft. ● In our boats, we generally use one bearing in the shaft bracket and a cut bearing that is halved on the hull side. ● Due to the low friction, wear on the shaft is reduced by 90%, which helps to lower maintenance and replacement costs. ● Compared to nylon, rubber, and elastomer materials, it shows almost no compressive deformation even under higher loads in wet conditions. ● The thermal expansion commonly seen in synthetic material bearings is one-third that of nylon or acetal, and there is no deformation due to water infiltration or heat. Therefore, no clearance adjustments are necessary. ● It is also resistant to dilute acids, organic solvents, oils, and petroleum, exhibiting excellent chemical resistance.

• others

●This is a high cost-performance model that achieves excellent quality at a low price. Ideal for small boats. ●Equipped with a check valve to prevent backflow. ●Removable discharge port.

• others

Standard - A standard model with sufficient discharge capacity recommended for small boats. - Equipped with a check valve to prevent backflow of water. - Discharge port is detachable. Automatic - A convenient automatic type that detects water every two and a half minutes and pumps it out automatically. - Equipped with a check valve to prevent backflow of water. - Discharge port is detachable. *The 24V type is made to order, so delivery times may vary.

• others

- Despite its compact size, it boasts a reliable discharge rate of 50L/min. - Equipped with a check valve to prevent backflow of water. - Discharge port is removable.

• others

- The most powerful type in the series with a maximum discharge rate of 69L/min. - Equipped with a check valve to prevent backflow of water. - Removable discharge port.

• others

It quickly discharges bilge water with a reliable high flow rate type (95L/min).

• others

● Equipped with a new type of electric water sensor, eliminating the need for a float switch. It automatically pumps out only seawater, even in bilge mixed with oil. ● The hose joint comes with both straight and elbow fittings.

• others

● Equipped with a new type of electric water sensor, eliminating the need for a float switch. It automatically pumps out only seawater, even in bilge mixed with oil. ● The hose joint includes both straight and elbow fittings.

• others

● A powerful hand bilge pump with a 30cm stroke and a large discharge rate of 28L per minute. Keeping one on hand in a sail locker provides peace of mind even if the electric pump breaks down. ● It comes with brackets for both the main body and the hose, allowing it to be used while fixed or detached. ● The suction inlet with a strainer makes it difficult to suck in debris, and the check valve prevents backflow of water.

• others

● Instead of penetrating the code, connecting it with a connector is useful for attaching and detaching non-permanent equipment. ● By attaching a wire to the plug part and tightening the nut, the rubber inside the nut is crimped to prevent water intrusion. ● With a stop screw, it will not come loose due to vibrations or other factors. ● Comes with a cap that has a waterproof gasket. 2-core brass chrome-plated plastic cap with gasket 11537-2P Base diameter: φ36 Total installation height: 56mm Height when capped: 30mm 11556-2P Base diameter: φ45 Total installation height: 64mm Height when capped: 35mm

• others

- Easily removes up to 10 layers of surface paint with a single application. - No damage to gel coats or FRP. - The recommended waiting time after application is 4 to 24 hours (varies depending on temperature and paint thickness; recommended application temperature: 16 to 26 degrees Celsius). Its viscous paste consistency allows for easy application on vertical surfaces. - It penetrates deeply to retain moisture for a longer time, enabling the treatment of large areas at once. - Can be applied with easily obtainable tools such as brushes or spatulas (a trowel brush is recommended). - It is made from biodegradable materials and is non-combustible. It does not contain harsh chemicals like preservatives or methylene chloride, making it an environmentally friendly paint remover. - Therefore, no neutralizing agent is required. - Additionally, it has no unpleasant odor and can be washed away with water. - Cleaning brushes and other tools can also be done with water; no solvents are needed. - Safe for use on gel coats, FRP, wood, metal, plaster, stone, marble, and brick (will not discolor or damage wood surfaces). *Note: Due to the wide variety of gel coat types and degrees of deterioration, please be sure to test on a small area first to determine compatibility and necessary waiting time. We cannot accept any responsibility for issues or costs arising from not conducting a test, so please be aware of this in advance.

• others

● It has low wind resistance, is lightweight, does not damage the sail, and is easy to install. This is why the original Mobri "Radar Reflector" is adopted by yachts and leisure boats around the world, as well as by coast guards, navies, and NATO. ● Small vessels such as yachts and boats need to quickly make their presence known to large ships. Let's strongly reflect our own vessel on the radar of other ships, day and night, to prevent accidents before they happen!

• others

This is the best-selling wind direction indicator for cruisers, known worldwide as the epitome of yacht wind vanes, featuring smooth movement and weather resistance. By adjusting the left and right wings to match your boat's angle of heel, it serves as a guide for close-hauled sailing. Of course, it comes with reflective stickers for safe nighttime navigation.

• others

It can be used for various purposes, whether on a yacht or in a camper! Single ● The stainless steel ball is smooth and does not move too much, allowing you to read the heel angle. ● It comes with double-sided tape on the back. ● It is useful for leveling the vehicle at a campsite when using a camper. * There may be a small amount of air bubbles, but this does not affect its use. Double ● This is a dual-level inclinometer that allows for a more precise view of a 5-degree range. ● It is convenient for checking the heel angle while sailing, as well as the balance of a moored boat. * There is no double-sided tape. * There may be a small amount of air bubbles, but this does not affect its use.

• others

● This is a convenient feeder for hoisting a bolt rope type mainsail. ● It can be secured by inserting the included rod-shaped nut into the mast groove or by using screws for fixation.

• others

● A quick-release rubber joint that can be removed from the tiller with just a twist of the base. It is effective for theft prevention. ● It is compatible with items that have a pipe inner diameter of 12 to 13 mm.

• others

● A lightweight 140g extension with a large knob that is easy to use. When the wind blows, it securely fits in your thumb, making it less likely to slip out and providing peace of mind. ● The universal joint part is made of stainless steel. ● A holding clip for securing it to the tiller is also included.

• others

● This is a dedicated tiller lower bracket for the tiller pilot (ST1000/ST2000) adjusted to the height of the NJY boat's tiller. It is designed to match the height of the cockpit bench and the underside of the tiller. ● Please specify the type of boat when placing your order. ● Please secure the tiller with a bolt and nut of φ6mm that penetrates through the tiller. (Bolts and nuts are not included.) * Please provide the "pin" included with the product for manufacturing. The shipping cost to send it to us will be borne by the customer. After receiving the pin, we will manufacture and then ship the product.

• others

This is a socket base for the main unit to be installed on the cockpit bench of the NJY boat (Ribecchio Esprit Bandfett). Please secure it with screws from the back side of the bench.

• others

Outstanding design and weather resistance, exceptional functionality of Blue Performance ● A very stylish winch cover in a new style. ● The inside of the cover features three plastic spring locks, preventing it from being blown away by the wind. Additionally, there are two ventilators at the top, allowing moisture and temperature to escape from the inside. ● The color is light gray. Made of ripstop material that is resistant to tearing.

• others

Outstanding design and weather resistance, exceptional functionality of Blue Performance ● Convenient for organizing sheets mounted on the bulkhead. A UV cover is also included. ● The bottom of the bag is made of mesh, allowing you to toss in wet sheets without worry. ● Installation is simple: just fix the included four plastic hooks to the wall with tapping screws and hang the shock cord loop from the back on them. ● The color is light gray. Made of ripstop fabric that is resistant to tearing.

• others

Outstanding design and weather resistance, excellent functionality of Blue Performance ● Easily attachable to a lifeline with Velcro, making it convenient for organizing sheets and small items. ● The bottom of the bag is made of mesh, allowing you to toss in wet sheets without worry. ● The color is light gray. Made of ripstop fabric that is resistant to tearing.

• others

Outstanding design and weather resistance, excellent functionality of the Blue Performance ● It is important to properly "manage" the halyards around the mast step. By attaching this mast sheet bag to the mast with two Velcro straps and storing ropes inside, it becomes remarkably tidy. ● Moreover, it also prevents rope deterioration due to UV rays, achieving two benefits in one. ● The color is light gray. It is made of ripstop fabric that is resistant to tearing.

• others

Outstanding design and weather resistance, excellent functionality of Blue Performance ■ Can be installed in your favorite location with tapping screws, allowing you to hang a bundle of sheets. ● The length can be adjusted to fit the bundle of sheets with a belt that has a buckle. ● Color is light gray. Set of 2.

• others

● This is a winch handle case that can be easily attached to the cockpit. ● The bottom of the bag is made of mesh, so you don't have to worry about spray or rain getting in. ● The S size can hold one winch handle, while the L size can hold two. ● For installation, please secure it to the wall with tapping screws. ● The color is light gray, and it is made of ripstop fabric that is resistant to tearing.

• others

● It features a flat, unobtrusive pocket storage that is practical. The lid is secured with Velcro. It is convenient for storing items that are not thick. ● It comes with a larger mesh pocket that can hold wet items without worry. ● Installation is simple: just fix the four included plastic hooks to the wall with tapping screws, and then hang the shock cord loop on the back. ● The color is light gray, and it is made of ripstop material that is resistant to tearing.

• others

- It can be mounted on the walls inside the cabin and is convenient for organizing various small items such as cigarettes, mobile phones, and toiletries. - The pocket opening has a cord stopper to prevent items from falling out. - Installation is simple: just fix the four included plastic hooks to the wall with tapping screws and hang the shock cord loop on the back. - The color is light gray, and it is made of ripstop material that is resistant to tearing.

• others

●It is a gentle lifeline cushion for your back. It can be installed from above without removing the lifeline. ●First, wrap the included transparent vinyl spiral pipe around the lifeline. Next, cover it with the rubber cushion that will serve as the inner layer. Finally, put on the gray outer cover and tighten the strings at both ends to complete the installation. ●The color is light gray. It is made of ripstop material that is resistant to tearing.

• others

●The entrance of the seamap bag is secured with Velcro to prevent water intrusion. The corners of the bag have rings, making it convenient to hang. ●It is the perfect size for holding the yacht and motorboat reference chart published by the Japan Waterway Association (500X400mm). ●The color is light gray. It is made of tear-resistant ripstop and transparent PVC.

• others

● A single faucet with a switch that has a gentle water flow and minimal splashing. ● It can be folded when not in use, making it perfect for sinks with glass covers and equipped with a switch. ● The lever switch is ON when raised and OFF when lowered. ● It comes with a "twist part" for removing the filter at the tip of the spout, making cleaning easy. * A φ16 nut joint cannot be used for hose connections. Please secure it with a standard hose clamp. * It is designed for submersible pumps and cannot be used with pressure pumps.

• others

This is a convenient table leg that can be folded for storage. By simply pressing the black button, it can be folded with one touch. The thick legs provide stability and give a luxurious impression to the interior without appearing weak. The total length (720mm) can be cut if the end cap is removed.

• others

● A convenient flexible reading light for when you want to brighten your workspace. ● It has a switch on the back of the head. ● The white light emitted from the 9 LEDs is moderately diffused, subtly illuminating your workspace without disturbing those around you. ● The flexible part is 30cm long, allowing for illumination at any angle.

• Spotlight

● This is a replacement handle common to the NEMO company's hatches "Silver Hatch" and "Slim-line" used on our boats. Total length: 150mm ● Made of high-durability Delrin with fiberglass. ● Includes a handle lock receiver and mounting rivets. ● There is a left and right orientation, so please examine the photo carefully before ordering. Alternatively, you can check the "SX / DX" mark on the back of the handle lever.

• others

● Equipped with 120% turbo mode. This is a sine wave (pure sine wave) inverter capable of 1800VA usage in turbo mode. ● While ensuring equivalent performance, it is also equipped with various protection features. You can safely use 100V devices. ● Remote operation is possible with a separately sold remote control unit (REMO-781).

• others