日本アイエムアイ List of Products and Services

This is a shell-type LED mounting board. Resistance connection is possible. The connector is compatible with the IL-G series.

• others

It is assumed that adjustments will be made using a driver from the panel side. The connector is compatible with the IL-G series.

• others

It is equipped with a variable resistor and can be adjusted with a volume control. The connector, resistance value, and curve can be changed. 【Specifications】 Volume: 10kΩ type A Connector: Mating lock male/female

• Other commercial buildings and service facilities

This is an attenuator for analog audio signals. It is equipped with two variable resistors, allowing for volume and balance adjustments. The connector, resistance values, and curve can be changed. 【Specifications】 Dual volume: 1kΩ A type, 5kΩ MN type Connector: Maytenlock male/female

• Other commercial buildings and service facilities

This is an exhaust fan with a rotation speed abnormality alarm function. The fan operates on an AC outlet, and the alarm operates with a separate power supply AC adapter. The alarm outputs individually from the connector of each fan. 【Specifications】 External dimensions: Width 396mm, Depth 299mm, Height approximately 40mm

• Other commercial buildings and service facilities

This is a conversion cable with a driver transformer built into the connector side. 【Specifications】 Transformer 600Ω

• Other commercial buildings and service facilities

This is a power unit equipped with service outlets. It is a unit that distributes AC power. Each circuit is equipped with a breaker that will trip at a specified overcurrent (available options are 20A, 30A, or 40A). The terminal block is provided on the top surface. It is sized to fit in an EIA rack. To prevent accidental operation, it is possible to install an acrylic panel in front of the breaker. 【Specifications】For the appearance diagram, please refer to the catalog. External dimensions: Width 482mm, Depth 250mm, Height 88mm.

• Other commercial buildings and service facilities

This is a unit that distributes AC power. Each system is equipped with a breaker that will trip at a chosen overcurrent (options available for 20A, 30A, or 40A). The terminal block is provided on the back. It is sized to fit in an EIA rack. To prevent accidental operation, it is possible to install an acrylic panel in front of the breaker. 【Specifications】Please refer to the catalog for the appearance diagram. External dimensions: Width 482mm, Depth 250mm, Height 88mm.

• Other commercial buildings and service facilities

This is a unit for distributing AC power. Each system is equipped with a circuit breaker that will trip at a specified overcurrent (available options are 20A, 30A, or 40A). The terminal block is provided on the back. It is sized to fit into an EIA rack. To prevent accidental operation, it is possible to install an acrylic panel in front of the circuit breaker. 【Specifications】Please refer to the catalog for the appearance diagram. External dimensions: Width 482mm, Depth 250mm, Height 88mm.

• Other commercial buildings and service facilities

This is a display light using the XL series from Sunmuron Co., Ltd. The connector shape can be customized to meet the customer's specifications. Changing the text by replacing the film is also easy. Due to its slim and lightweight design, it can be installed in places where conventional display lights cannot be mounted. 【Specifications】 External dimensions: Width 310mm, Depth 14mm (excluding mounting brackets), Height 110mm Power supply voltage: DC 12v, 24v *For more details, please download the PDF or feel free to contact us.

• Other store equipment and supplies

This is an indicator light that lights up when powered by a connector and AC adapter. By adopting an open panel design, we enhance cost competitiveness. The indicator light uses a three-color emission system, capable of emitting red, green, and yellow. This model is a single-light type. 【Specifications】 External dimensions: Width 482mm, Depth 80mm (excluding protrusions), Height 43.6mm Power supply voltage: 12v, 24v *For more details, please download the PDF or feel free to contact us.

• Other store equipment and supplies

This is a tabletop switch with two switches arranged side by side on a slightly larger-sized main unit. The power supply can be switched between a DC connector and an AC adapter. Like other switch boxes, it can be customized with options such as button illumination color, button film text, operating voltage, connecting magnet sheets, engraved text, and more. Please feel free to consult us if you have any requests. 【Specifications】 External dimensions: Width 100mm, Depth 100mm, Height 45mm Power supply voltage: DC 5v, 12v, 24v *For more details, please download the PDF or feel free to contact us.

• Other store equipment and supplies

If you place an order for 10 units, you will receive a 50% discount. This is a switch box that focuses on low cost by changing the casing to plastic. Despite being low cost, its functions and options are equal to or better than the conventional model, and customization such as wall mounting with magnets, body color, and printing on the body is also possible. For more details, please contact us.

• Other store equipment and supplies

The W23S10244 is a compact indicator light for equipment installation. It lights up when a DC voltage is supplied from an external source and a lighting signal is input. The main body is equipped with a Hi/OFF/Low switch, allowing for brightness adjustment. Additionally, a film can be inserted into the front slit. Options are available for changes to LED color, power connector, body color, and mounting method, among others. Please feel free to consult us if you have any requests. 【Specifications】 External dimensions: Width 86mm, Depth 50mm, Height 80mm *excluding cable Power supply voltage: DC 12V *For more details, please download the PDF or feel free to contact us.

• Other store equipment and supplies

The "W22S9683" is a box-shaped switch box with one switch and DC power supply. The switch is activated by an external signal. When the switch is pressed, a Lo signal is output. Multiple switches can be connected using a magnetic sheet. Options include the presence or absence of a switch cover, switch color, film, and engraving on the main body. Please feel free to consult us if you have any requests. 【Specifications】Refer to the catalog for the appearance diagram External dimensions: Width 44mm, Depth 80mm, Height 28mm Power supply voltage: DC 5v, 12v, 24v

• Other store equipment and supplies

The "RV-012" is a mounting board optimized for the Alps Electric RK09L1120 series volume control. This board does not have mounting holes, so the volume control is secured to the board using a nut. The expected components are the Alps Electric RK09L1120 series and the Japan Crimped Terminal B3P-PH-K-S. 【Specifications】 External dimensions: Width approximately 12mm, Height approximately 21mm *For more details, please download the PDF or feel free to contact us.

• others

The PS-020 is a power distribution board that allows for the connection of a 3-terminal regulator. It can accommodate connectors and regulator mounts, and there is also a free area available. The connectors are intended for use with the Japanese crimp terminal manufacturer VH and PH series, as well as the IL-G series from Japan Aviation Electronics Industry. Please feel free to consult us if you have any requests. 【Specifications】 External dimensions: approximately 63.5mm x approximately 43.2mm *For more details, please download the PDF or feel free to contact us.

• others

The "W21S9557" is a switch box with one switch, designed for oblique neck shape and DC power supply. It activates the switch lighting via an external signal. When the switch is pressed, a Lo signal is output. Multiple switches can be connected using a magnetic sheet. Options for switch color, film, and engraving on the main body are available. Please feel free to consult us if you have any requests. 【Specifications】Refer to the catalog for the appearance diagram. External dimensions: Width 44mm, Depth 100mm, Height 30.5mm Power supply voltage: DC 5v, 12v, 24v

• Other store equipment and supplies

The "W18S6772" is a switch box with a box shape, equipped with 2 SWs, powered by DC, and using an XLR connector. It allows for individual activation of the two switches via external signals, and pressing each switch outputs a Lo signal. Multiple switch boxes can be connected using a magnetic sheet. Options for customization include button illumination color, button film text, operating voltage, connecting magnetic sheets, engraved text, and more. Please feel free to consult us if you have any requests. 【Specifications】 Outer dimensions: Width 44mm, Depth 80mm, Height 28mm Power supply voltage: DC 5v, 12v, 24v *For more details, please download the PDF or feel free to contact us.

• Other store equipment and supplies

The "W20S8612" is a large display light without segmentation. It displays with the input of a Level Lo signal. It requires a hole on the back for wall mounting, and it lights up by connecting the wiring from the wall to the terminal block. Optionally, changes to the text and acrylic panel color are possible. Please feel free to consult us if you have any requests. 【Specifications】 External dimensions: Width 380mm, Depth 120mm, Height 130mm Power supply voltage: DC 12v *For more details, please download the PDF or feel free to contact us.

• Other store equipment and supplies

The "W21S9263" is a large display light with a maximum of 2 segments. It displays with a Level Lo signal input. The upper and lower segments can be lit individually. Options for changing text and acrylic panel color are available. Please feel free to consult us if you have any requests. 【Specifications】 External dimensions: Width 210mm, Depth 120mm, Height 150mm Power supply voltage: DC 12v *For more details, please download the PDF or feel free to contact us.

• Other store equipment and supplies