シンクロアイズ List of Products and Services

In excavation work using a backhoe, when the depth exceeds 1 to 2 meters, the bucket tip becomes difficult for the operator to see, and the larger the depth, the greater the blind spots become. Therefore, near buried pipes or existing equipment, operations tend to rely on experience and intuition, increasing the risk of contact accidents and excavation mistakes. Bucket Eyes is a camera system for heavy machinery that displays real-time images from a camera installed at the bucket tip onto a monitor, visualizing the blind spots during excavation work. Since the operator can grasp the situation at the bucket tip through video, it helps prevent contact with buried pipes and cables and enhances safety in narrow or deep excavation work.

In the excavation of vertical shafts (known as "takeko") for sewer and underground facility construction, there are often scenes where workers operate inside deep holes. However, it can be difficult for backhoe operators to see inside the hole, making it challenging to confirm the positions of the workers. Bucket Eyes is a camera system for heavy machinery that displays real-time footage from a camera mounted on the bucket's tip onto a monitor, allowing operators to check the conditions inside the vertical shaft while performing excavation work. Since it enables visual confirmation of workers and excavation conditions inside the hole, it allows for excavation work to proceed while ensuring safety, contributing to improved safety at the site.

In foundation excavation work, it is necessary to dig deep into the ground to install the foundation. As the excavation depth increases, the bucket tip of the backhoe becomes harder for the operator to see, leading to reliance on intuition during the work. Bucket Eyes is a camera system for heavy machinery that displays real-time footage from a camera mounted on the bucket tip onto a monitor, visualizing blind spots during excavation. This allows for confirmation of the conditions at the bucket tip even during deep excavation work, contributing to improved excavation accuracy and safety. It makes deep digging work in foundation construction more secure and reliable.

In the civil engineering industry, safety in excavation work is one of the most important issues. In particular, accidents involving contact with underground installations or piping not only threaten the safety of workers but can also lead to property damage and delays in construction schedules. Accurately understanding the conditions at the tip of the bucket, which are difficult for the operator to see, is essential for accident prevention. Bucket Eyes were developed to address this challenge. 【Usage Scenarios】 - Excavation work in areas with many underground installations - Work in narrow spaces or deep excavation - Work in areas with poor visibility for the operator 【Benefits of Implementation】 - Reduced risk of contact with underground installations - Ensured safety for workers - Improved work efficiency - Reduced risk of construction delays

In disaster recovery sites, prompt and safe rescue operations are required. The removal of debris from collapsed buildings and search activities in landslide disasters necessitate excavation work using heavy machinery. However, excavation work in areas with poor visibility or where there may be buried objects underground carries the risk of secondary disasters. Bucket Eyes is a camera system for heavy machinery that displays camera footage from a camera attached to the tip of an excavator bucket on a monitor such as a tablet, eliminating blind spots during excavation work. Operators can grasp the situation at the bucket tip in real time, supporting safe excavation operations. 【Usage Scenarios】 - Removal of debris from collapsed houses - Search activities at landslide disaster sites - Excavation work in narrow spaces 【Benefits of Implementation】 - Acceleration of rescue operations - Reduction of secondary disaster risks - Ensuring the safety of workers

Bucket Eyes is a system that allows operators to check the bucket and underground conditions in real-time while seated in the driver's seat, eliminating blind spots. * "Any heavy machinery is OK" - The battery-powered, retrofitted camera changes the norms on site. * Installation work is "unnecessary." Just attach it with magnets and head to the site immediately. Since it is a battery-powered type, there is no need to secure power from the heavy machinery or deal with complicated wiring. Because it attaches with magnets, you can easily switch it out depending on the heavy machinery used each day. * With "Bucket Eyes," old heavy machinery can be upgraded to the latest ICT construction equipment. Before considering replacing with the latest models, simply retrofitting Bucket Eyes can update existing equipment. It has a simple configuration of a tablet PC and camera, which reduces the risk of failure and makes maintenance easy. * When conducting a web meeting, we can show you actual footage via video.

Bucket Eyes allows operators to check the bucket and underground conditions in real-time while remaining seated in the driver's seat, eliminating blind spots. By removing the need for a "helper" to check the bucket's status, we achieve a reduction of one worker, significantly cutting labor costs while accelerating work speed. ■ Real-time confirmation of blind spots in underground excavation work ■ Cost reduction and productivity improvement ■ Easy installation with magnets and belts that require no wiring, taking only 3 minutes *During our web meeting, we can show you actual footage via video.

Bucket Eyes is a camera system for heavy machinery that displays the camera footage from a camera mounted on the tip of a backhoe bucket onto a monitor such as a tablet, eliminating blind spots during excavation work. It allows operators to grasp the situation at the tip of the bucket in real-time, reducing the risk of contact with underground pipes and buried objects. It supports safe and accurate excavation even in narrow spaces and deep digging operations. Due to its wired connection, there is almost no delay, and the installation is designed to be simple, as it just attaches to the machinery with magnets. It simultaneously achieves safety measures and improved work efficiency on site.

The Bucket Eyes system allows operators to check the bucket and underground conditions in real-time while remaining seated in the driver's seat, eliminating blind spots. *No need to stand up anymore. The pleasure of having "your own eyes" reach the tip of the bucket. *Reduces psychological and physical strain. The fatigue at the end of the day is different. There’s no longer the hassle of repeatedly standing up to peek or getting off the heavy machinery to check. You can simply check the tablet while sitting in a natural posture, dramatically reducing strain on your back and neck. *Digital support for skilled techniques. Smart and efficient excavation. Since you can accurately see the condition of the bucket, unnecessary movements are reduced, and excavation precision improves. There are no complicated operations; just turn on the power and you can start immediately—it's a partner for professionals. *When we conduct a web meeting, we can show you actual video footage.

【Verification Environment】 - Excavation in a site with poor geology, abundant in stones and rocks - Required excavation depth: approximately 2 to 3 meters 【Product Set】 - Tablet: 1 - Camera (1 for the arm section, 1 for the boom section): total of 2 The camera is connected to the tablet via a wired connection, designed to minimize delay. 【Operator Feedback】 - The shape of the stones was clearly understood when removing them during excavation. - Since visibility is possible up to 1 meter, work was conducted by closely observing the screen for deeper areas. - The operator could easily identify where to insert the tip of the claw, which is expected to shorten construction time. (The operator can monitor the signals and understand the arrangement of stones and structures within the excavation site, allowing for effective work.) 【Improvement Requests】 - I would like the camera to be positioned on both sides of the arm section rather than on the arm and boom sections. ↓ 【Response】 - We promptly improved the design to allow installation on both sides of the arm section. After reusing it, the feedback was that it has improved. We will continue to make improvements based on the opinions of users.

This is a camera system for heavy machinery that attaches a camera to the tip of a hydraulic excavator's bucket, allowing real-time monitoring of the excavation situation. In areas with buried utilities such as pipes and communication cables, it can be difficult for the heavy machinery operator to see the tip of the bucket, increasing the risk of accidental damage. By using Bucket Eyes, operators can work while visually confirming the condition of the bucket tip and the excavation site, thereby reducing the risk of damage to buried pipes and equipment. It supports improved safety and work efficiency in excavation work around buried utilities, such as water and sewage construction, gas pipe work, and communication equipment installation.

In the construction equipment industry, accurate inventory management of materials and tools is crucial for preventing project delays and controlling costs. In particular, the loss of materials on-site or damage to materials caused by heavy machinery can lead to significant losses. Bucket Eyes allows for real-time visibility of blind spots around heavy machinery, enhancing safety during the movement and placement of materials and contributing to more efficient inventory management. This reduces the risk of accidents on-site and supports smooth operations. 【Usage Scenarios】 - Heavy machinery operations at material storage areas - Loading and unloading of materials - Transporting materials in tight spaces 【Benefits of Implementation】 - Reduced risk of material damage from heavy machinery - Prevention of material loss - Ensured safety for workers - Improved accuracy in inventory management

In the installation plan for solar power generation equipment, the safe operation of heavy machinery and the improvement of work efficiency are essential. In particular, there is a possibility of accidents or work delays caused by blind spots of heavy machinery, such as checking the terrain and obstacles at the installation site and transporting materials. BucketEyes allows for real-time confirmation of the blind spots of heavy machinery, thereby enhancing safety and supporting work according to the plan. 【Usage Scenarios】 - Heavy machinery operation during solar panel installation - Safety checks during material transportation - Terrain confirmation at the installation site 【Effects of Implementation】 - Improved safety of heavy machinery operation - Increased work efficiency - Reduced risk of delays in the installation plan

In the tunnel surveying industry, accurate measurements and safe operations are essential. Particularly in areas where heavy machinery is involved, the risk of accidents due to blind spots increases. Bucket Eyes is a system that allows operators to check the blind spots created by buckets and the underground conditions in real-time while seated in the driver's seat. It is an aftermarket camera system compatible with all manufacturers and can be installed on various heavy machinery, such as backhoes. This enhances safety in surveying operations and improves work efficiency. 【Usage Scenarios】 - Surveying work inside tunnels - Ensuring visibility for heavy machinery operators - Creating a safe working environment 【Benefits of Implementation】 - Reduced risk of accidents due to blind spots - Improved accuracy of surveying work - Shortened work time

In the bridge construction industry, the accuracy and efficiency of inspection records are required. Inspections in high places or narrow spaces also come with safety risks. Bucket Eyes supports safe inspection work by allowing operators to check blind spots in real-time while seated in the driver's seat. This retrofittable camera system is compatible with all manufacturers, effectively utilizing existing heavy machinery and contributing to the efficiency of inspection work. 【Usage Scenarios】 - Bridge inspection work - Checking blind spots during high-altitude work - Work in narrow spaces 【Benefits of Implementation】 - Improved safety - Increased work efficiency - Enhanced accuracy of inspection records

On electrical construction sites, accurate work based on the schedule is required. In particular, ensuring the safety of workers and visualizing progress are important. Accidents due to blind spots and delays in work can lead to significant losses. BucketEyes is a system that allows operators to check blind spots in real-time while seated in the driver's seat. It is an aftermarket camera system compatible with all manufacturers, and can be installed on various heavy machinery such as backhoes (mini excavators). Installation is easy, and since it has a built-in battery, there is no need to secure power or deal with wiring. Older machinery can also be easily updated. 【Usage Scenarios】 - Progress management of work based on the schedule - Ensuring the safety of workers - Checking blind spots of heavy machinery 【Benefits of Implementation】 - Improved work efficiency - Enhanced safety - Cost reduction

In the construction industry, progress management is crucial for understanding the site conditions in real-time and for early detection of delays and issues. In particular, the operation status of heavy machinery and the progress of work significantly impact the overall schedule. Bucket Eyes is a system that allows operators to check the conditions of blind spots and underground areas in real-time while seated in the driver's seat. This enables accurate grasping of progress and supports quick decision-making. 【Usage Scenarios】 - Checking the operation status of heavy machinery - Understanding the progress of work - Safety management 【Benefits of Implementation】 - Improved work efficiency - Enhanced safety - Increased accuracy of progress management

In waste management within the dismantling industry, it is crucial that heavy machinery operations are conducted safely and efficiently. Particularly during the loading and sorting of waste, accidents can occur or work efficiency can decline due to blind spots created by the machinery. Bucket Eyes is a system that allows operators to check the blind spots of the bucket and the underground situation in real-time while seated in the driver's seat. It is an aftermarket camera system compatible with all manufacturers and can be installed on various heavy machinery, such as backhoes. This leads to improved safety and enhanced work efficiency. 【Usage Scenarios】 - Waste loading operations - Sorting operations - Heavy machinery operations 【Benefits of Implementation】 - Ensuring the safety of heavy machinery operators - Reducing work time - Streamlining waste management

In the civil engineering industry, it is essential to accurately record site conditions and utilize this information for reports and document preparation. Particularly, monitoring the operation of heavy machinery and ensuring safety in the surrounding area are crucial for accident prevention and improving work efficiency. Bucket Eyes is a system that allows operators to check the blind spots of the bucket and the underground situation in real-time while seated in the driver's seat. It is an aftermarket camera system compatible with all manufacturers and can be installed on various heavy machinery, such as backhoes. This enables a detailed understanding of site conditions and the ability to maintain accurate records. 【Usage Scenarios】 - Recording the operation of heavy machinery - Ensuring safety on site - Preparing reports 【Benefits of Implementation】 - Improved safety through visualization of operations - Enhanced accuracy of records - Reduced time for document preparation