ラクテム List of Products and Services

The main body and the screw part do not rotate, but you can adjust the installation length and the orientation of the ring using a hex nut. Unlike general eye bolts, the ring moves freely. This product is made of all stainless steel.

• others
• Renovation and repair methods

Compared to general similar-shaped products, the magnet is larger and has a stronger adhesive force. It comes with a hex nut, allowing for height adjustment and use even without a screw hole.

• others

Compared to general similar-shaped products, the magnet is larger and has a stronger adhesive force. Since the screw hole is not through, there is no worry of hitting the magnet when tightening.

• others

The inner diameter has a fine thread hole, but coarse threads are also available in the lineup. It is designed to be tightened with a toothed washer and a hex nut without using special tools. When using the included toothed washer, there is no worry about loosening. Since it has a hex head type, it can be easily tightened with a wrench or similar tool.

• others

It has a hexagonal head type, so it can be easily tightened with a wrench or similar tool. Additionally, it can be installed on thin plates (with round holes) using hex nuts and spring washers.

• others
• Renovation and repair methods

Since it is made of resin material, it can hold objects firmly without scratching them. The knob is available in two colors, white and black, and the tip pad is also available in brass material.

• others

Since it is made of brass, it can hold objects securely without scratching them. The knob is available in two colors, white and black, and the tip pad also comes in resin material options.

• others

Since it is made of resin material, it can hold the object firmly without scratching it. The knob is available in two colors: white and black, and the tip pad is also available in brass material.

• others

Since it is made of brass, it can hold objects securely without scratching them. The knob is available in two colors, white and black, and the tip pad is also available in resin material.

• others

The resin part is available in two colors: white and black.

• others

It can be easily inserted and removed, making it user-friendly and accessible for anyone. Its short installation length is also effective for securing thin plates (flat bars) and similar materials.

• others

It comes with a ball chain and ring to prevent it from falling off, which is also effective for loss prevention. It can be easily inserted and removed, making it user-friendly for anyone. Due to its short installation length, it is also effective for securing thin plates (flat bars) and similar items.

• others

It can be easily inserted and removed, making it user-friendly and accessible for anyone. Its short installation length also makes it effective for securing thin plates (flat bars) and similar materials.

• others

It is a structure that tightens with a toothed washer and a hex nut without using special tools. When using the included toothed washer, you can use it without worrying about loosening. Since it has a hex head type, it can be easily tightened with a wrench or similar tool.

• others

The nuts, chains, rings, and fittings are made of all stainless steel. The length of the chain can be selected from 7 sizes according to the intended use.

• others

The main body is made of resin material, so there is no worry about rust. The neodymium magnets are also covered with rubber material, designed to prevent damage and breakage.

• others

The main body is made of resin material, so there is no worry about rust. The neodymium magnets are also covered with rubber material, making it designed to prevent damage and breakage.

• others

Since it has a hexagonal head type, it can be easily tightened with a wrench or similar tool. Additionally, by using hex nuts and spring washers, it can also be installed on thin plates (with round holes).

• others
• Renovation and repair methods

Magnets can be selected based on their adhesive strength and size, and you can also choose the lever from three colors. The neodymium magnet is covered with an iron cap to enhance its magnetic force while making it less prone to breaking. By attaching the included anti-slip rubber to the magnet surface, it prevents scratches and provides a non-slip effect.

• others

Since it is made of resin material, it can hold objects without scratching them. The knob is available in two colors: white and black, and the tip pad is also available in brass material.

• others

Since it is made of resin material, it can hold objects without scratching them. The knob is available in two colors, white and black, and the tip pad is also available in brass material.

• others

Since it is made of brass, it can hold objects firmly without scratching them. The knob is available in two colors, white and black, and the tip pad is also available in resin material.

• others

Since it is made of brass, it can hold objects firmly without scratching them. The knob is available in two colors, white and black, and the tip pad is also available in resin material.

• others

When tightened, the resin pad can come into contact with the counterpart and secure it. Additionally, since it is made of resin material, it can hold the counterpart without causing any damage. There is also a lineup of brass material for the tip pad.

• others

When tightened, the brass pad can make contact with the counterpart and secure it in place. Additionally, since it is made of brass, it can hold the counterpart firmly without causing any damage. There are also resin material options available for the tip pads.

• others

The resin part is available in two colors: white and black.

• others

By placing a grommet between the magnet and the washer, it can be used in areas where magnetization is present. The neodymium magnet is covered with a metal cap to enhance its adhesive strength and prevent damage. By attaching non-slip rubber to the magnet, it becomes less likely to slip off, and it also helps prevent scratches and damage to both the magnet and the mounting side.

• others

The opposite side of the magnet has a hexagonal hole, allowing it to be tightened and removed with a hex wrench. The sizes range from a small diameter of M4 to a maximum of M16. Due to its short overall length, it can also be installed on thin plates.

• others

Instead of using a typical ferrite magnet sheet, we have adopted a powerful neodymium magnet. By attaching round neodymium magnets to the four corners of the card case, it is securely fixed and can be displayed effectively. The thickness of the neodymium magnets is about 3mm, which allows them to stand out from the mounting surface, enhancing the appearance and making removal smooth. By applying anti-slip rubber to the magnets, they are less likely to slip off, and it also helps prevent scratches and damage to both the magnets and the mounting surface. The card case has a thickness of about 0.5mm, making it resistant to bending and providing strong protection for its contents.

• Office supplies and stationery

The hook and loop fastener (binding Velcro) can be freely adjusted in length. It can be fixed with the included tapping screws, allowing it to be installed on wood, walls, and more.

• others
• Safety and consumables

The hook-and-loop fastener (binding Velcro) can be freely adjusted in length. It can adhere with magnets without the need for screws, and the mounting hardware can securely hold the counterpart. To enhance the adhesive force compared to a standalone neodymium magnet, the magnet is covered with a cap. By attaching the included anti-slip rubber to the adhesive surface, it provides scratch prevention and anti-slip effects.

• others
• Safety and consumables

The magnets come in four types with different sizes and suction strengths, allowing you to choose between left and right. The bracket can be adjusted to a 180-degree angle. By using the included thumb screw, you can adjust the angle by hand (without tools). If you want to tighten it further, remove the thumb screw and spacer, and use the included cross-recessed flat screw. Attaching the included anti-slip rubber to the magnet also helps prevent scratches.

• others

It can be used in various situations such as hanging or holding objects. To enhance the adhesive force compared to a standalone neodymium magnet, the magnet is covered with a cap. By attaching the included anti-slip rubber to the adhesive surface, it provides scratch prevention and anti-slip effects.

• others

It can be used in various situations such as hanging or holding objects. To enhance the adhesive force compared to a standalone neodymium magnet, the magnet is covered with a cap. By attaching the included anti-slip rubber to the adhesive surface, it provides a scratch prevention effect.

• others

It can be used in various situations such as hanging or holding objects. To enhance the adhesive force compared to a standalone neodymium magnet, the magnet is covered with a cap. By attaching the included anti-slip rubber to the adhesive surface, it provides a scratch prevention effect.

• others

When using the included plate screws, please check the hexagonal dimensions and tighten them with a hex wrench. By attaching the included anti-slip rubber to the contact surface, it provides scratch prevention and anti-slip effects.

• others

When using the included plate screws, please check the hexagon width and tighten them with a hex wrench. By attaching the included anti-slip rubber to the adhesive surface, it provides scratch prevention and anti-slip effect.

• others

The magnet side has a hexagonal hole, allowing it to be tightened with a hex wrench. By attaching the included anti-slip rubber to the adhesive surface, it provides scratch prevention and anti-slip effects.

• others

This product comes with anti-slip rubber, which can be attached to the adhesive surface to prevent scratches and provide a non-slip effect.

• others

By applying double-sided tape to the magnet, it can be used without the need for adhesive. Attaching non-slip rubber provides scratch prevention and makes it less likely to slip off.

• others

When using the included plate screws, please check the hexagonal dimensions and tighten them with a hex wrench. By attaching the included anti-slip rubber to the contact surface, you can prevent scratches and provide a non-slip effect. If you desire a stronger magnet, please choose the neodymium cap magnet.

• others

When using the included plate screws, please check the hexagon width and tighten them with a hex wrench. By attaching the included non-slip rubber to the contact surface, you can prevent scratches and provide a non-slip effect. If you desire a stronger magnet, please choose the neodymium cap magnet.

• others

There is a slight gap between the magnet and the hex bolt, allowing the magnet (φD) part to rotate freely. By using the separately sold [bracket for horizontal and vertical types with hex nut], it can be installed in various orientations. By attaching the included anti-slip rubber to the adhesion surface, it provides scratch prevention and slip resistance.

• others

By attaching the included anti-slip rubber to the adhesive surface, it prevents scratches and provides a non-slip effect.

• others

To enhance the adhesive force compared to a single neodymium magnet, the magnet is covered with a cap. By attaching the included non-slip rubber to the adhesive surface, it provides scratch prevention and a non-slip effect.

• others