セキュリティハウス List of Products and Services

■External Environment Diagnosis Function By connecting the optional S.E.C circuit board (sold separately) to the receiver, environmental conditions can be checked separately from intrusion detection. If the infrared light reception drops below a certain level due to bad weather, it will notify the receiving unit of the environmental deterioration. ■Malfunction Prevention Circuit A full safety system that mitigates the effects of heat haze, atmospheric fluctuations, temperature changes, and lighting ensures safe operation at all times. ■Powerful Beam Essential for Outdoor Security To accommodate attenuation from external light and adverse weather conditions such as rain, snow, and fog, the distance margin is set to more than ten times the warning distance. ■Easy and Reliable Light Axis Adjustment With the built-in aiming device and the included sensitivity checker, light axis adjustment can be performed easily and reliably. Additionally, there is a monitor jack for checking sensitivity levels with the optional (sold separately) level checker "EL-01." ■Outstanding Durability and Environmental Resistance The double drip-proof structure and stainless steel plate provide exceptional durability and environmental resistance. ■Flexible Security Network Configuration By synchronizing infrared signals, mutual interference is eliminated, allowing for the configuration of a flexible security network.

• Security Sensor Systems

Adoption of a dual response time system To prevent malfunctions caused by small animals and birds while ensuring reliable detection of intruders, it is possible to individually adjust the response speed for simultaneous four-beam light interruption and individual upper and lower beam light interruption. Simultaneous four-beam light interruption: 35ms to 500ms Individual upper and lower beam light interruption: 100, 200, 300, 500ms Prevent mutual interference and bypassing! Modulation frequency switching function When conducting linear surveillance with multiple infrared sensors or multi-stage surveillance, it is possible to easily avoid mutual interference and bypassing by switching the modulation frequency of the infrared pulse beam. (Switchable from 1CH to 4CH) Automatically set to optimal sensitivity! Auto gain lock function As long as it is within the maximum surveillance distance, the optimal sensitivity margin is automatically set according to the surveillance distance. Confirmation of gain lock is also easily performed with an electronic sound. Notify of environmental deterioration! External environment diagnosis function If the infrared light reception level drops below a certain threshold due to dense fog, heavy rain, snowfall, etc., an environmental deterioration signal will be output separately from the alarm signal.

• Security Sensor Systems

■Independent Detection of Upper and Lower Sections When using AT output, the upper and lower sections function as independent two-beam sensors, allowing detection by simply obstructing one beam. *To prevent false detection from birds and other sources, the detection response time is set longer compared to when both sections are obstructed. ■AT and HF Output It features two types of detection outputs: AT output, which can detect passing through, and HF output, which only detects simultaneous obstruction of the four beams in the upper and lower sections, enabling appropriate vigilance based on the situation and environment. ■Synchronous Multi-Stage Vigilance By synchronizing the timing of the light emission and reception, it is possible to achieve a more reliable multi-stage vigilance. ■Strong Against Ambient Light (Dual Modulation Method) By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights) and achieve reliable outdoor vigilance. ■Green Design It complies with the RoHS directive, which considers environmental impact. (Eliminates lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers) (RoHS: A directive established by EU member states that restricts the use of specific hazardous substances in electrical and electronic equipment.)

• Security Sensor Systems

■Strong against lightning (Enhanced lightning protection) We have strengthened the surge resistance performance to reduce damage from induced lightning. *This does not guarantee protection against failures or malfunctions caused by lightning strikes. ■Structure that prevents entry of ants and other pests (Insect and drip-proof design) By using insect-proof bushings and dedicated gaskets that envelop the electric wires, we achieve high dust, drip, and insect prevention measures (equivalent to IP65). The insect-proof bushing can be cut to match the size of the electric wire, preventing the entry of insects and water from the wire entry point and protecting the circuit board from corrosion. ■Energy-saving design (Reduced power consumption) We have significantly reduced the power consumption (to less than 50% of our conventional models). This allows for the use of smaller power supplies compared to previous models, eliminating the need for thick wiring even for long-distance connections, thus greatly reducing wiring material costs. ■Strong against ambient light (Dual modulation method) By adopting our unique dual modulation method for infrared beams, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights) and achieve reliable outdoor monitoring. ■Improved pole mounting (Back-to-back mounting) The adoption of a new pole mounting bracket has improved the workability when mounting back-to-back on poles. As a result, back-to-back mounting has become easier even at high altitudes.

• Security Sensor Systems

■Strong against lightning (Enhanced lightning protection) We have strengthened the surge resistance performance to reduce damage caused by induced lightning. *This does not guarantee protection against failures or malfunctions due to lightning strikes. ■Structure that prevents entry of ants and other pests (Insect and drip-proof design) By using insect-proof bushings and dedicated gaskets that envelop the wires, we achieve high dust, drip, and insect prevention measures (equivalent to IP65). The insect-proof bushing can be cut to match the size of the wire, preventing the entry of insects and water from the wire entry point and protecting the circuit board from corrosion. ■Energy-saving design (Reduced power consumption) We have significantly reduced power consumption (to less than 50% compared to our previous models). This allows for the use of smaller power supplies than before, eliminating the need for thick wiring even over long distances, thereby greatly reducing wiring material costs. ■Strong against ambient light (Dual modulation method) By adopting our unique dual modulation method for infrared beams, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights) and achieve reliable outdoor surveillance. ■Improved pole mounting (Back-to-back mounting) The adoption of a new pole mounting bracket has improved the workability when mounting back-to-back on poles.

• Security Sensor Systems

■Strong against lightning (Enhanced lightning protection) To reduce damage from induced lightning, we have strengthened the surge resistance performance. *This does not guarantee protection against failures or malfunctions caused by lightning strikes. ■Structure that prevents entry of ants and other pests (Insect and drip-proof design) By using insect-proof bushings and dedicated gaskets that envelop the wires, we achieve high dust, drip, and insect protection (equivalent to IP65). The insect-proof bushing can be cut to fit the size of the wire, preventing the entry of insects and water from the wire entry point and protecting the circuit board from corrosion. ■Energy-saving design (Reduced power consumption) We have significantly reduced power consumption (to less than 50% compared to our previous models). This allows for the use of smaller power supplies than before, eliminating the need for thick wiring even over long distances, which greatly reduces wiring material costs. ■Strong against ambient light (Dual modulation method) By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights) and achieve reliable outdoor monitoring. ■Improved pole mounting (Back-to-back mounting) The adoption of a new pole mounting bracket has improved the workability when mounting back-to-back on poles.

• Security Sensor Systems

■Bidirectional Communication Function [Patent] A pair of checkers communicate wirelessly with each other to perform the same operation. It can be confirmed via a display light whether the optical axis adjustment is being performed on the upper or lower level, and information such as the monitor output from the receiver can be shared between the two checkers, allowing for accurate and efficient adjustment work by a single person. ■Monitor Output Display The monitor output from the receiver is displayed on an LCD screen, enabling correct optical axis adjustments without the need for a tester. ■Self-Check Function (PXB Series Only) With the press of a single switch, a pair of checkers conducts inspections while communicating with each other and determines the quality of the optical axis adjustment. This allows for labor-saving in cases where multiple units are installed or during regular inspections. (Also applicable to TXF-125, but requires batteries) ■Sound Check Function The quality of the optical axis adjustment is indicated by sound. ■Manual Check Function This function allows for individual inspection of the upper and lower levels, enabling more precise and reliable inspections.

• Security Sensor Systems

■Dual Modulation Method By adopting our unique dual modulation method for infrared beams, we enhance the distinguishability from stray light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. (It is not affected by changes in illumination of up to 50,000 lux.) ■Four-Stage High-Power Beam By employing a four-stage high-power beam with 100 times the sensitivity margin and 10 times the distance margin, we reduce malfunctions during adverse environmental conditions such as fog, snow, and heavy rain. ■Wide Pitch By expanding the vertical and horizontal dimensions of the beam compared to conventional models, and in conjunction with the four-stage beam simultaneous blocking method, we significantly reduce malfunctions caused by birds and fallen leaves. ■Energy-Efficient Design We have significantly reduced power consumption. (Less than 50% compared to our conventional models) This allows for the use of smaller power supplies than before, eliminating the need for thick wiring even for long-distance wiring, thereby greatly reducing wiring material costs. ■Green Design We comply with the environmentally conscious RoHS directive. (We eliminate lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers.) *RoHS: A directive established by EU member states that restricts the use of specific hazardous substances in electrical and electronic equipment.

• Security Sensor Systems

■Dual Modulation Method By adopting our unique dual modulation method for infrared beams, we enhance the distinguishability from ambient light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. (It is not affected by changes in illumination of up to 50,000 lux.) ■Four-Stage High-Power Beam By employing a four-stage high-power beam with a sensitivity margin of 100 times and a distance margin of 10 times, we reduce false activations during adverse weather conditions such as fog, snow, and heavy rain. ■Wide Pitch By expanding the vertical and horizontal dimensions of the beam compared to conventional models, and in conjunction with the four-stage beam simultaneous blocking method, we significantly reduce false activations caused by birds and fallen leaves. ■Energy-Efficient Design We have significantly reduced power consumption (to less than 50% of our previous models). This allows for the use of a smaller power supply than before, eliminating the need for thick wiring even during long-distance installations, thereby greatly reducing wiring material costs. ■Green Design We comply with the RoHS directive, which considers environmental impact. (We eliminate lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers.) *RoHS: A directive established by EU member states that restricts the use of specific hazardous substances in electrical and electronic equipment.

• Security Sensor Systems

■Dual Modulation Method By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights) and achieve highly reliable outdoor surveillance. (It is not affected by changes in illumination of up to 50,000 lux.) ■Four-Stage High-Power Beam By employing a four-stage high-power beam with 100 times sensitivity margin and 10 times distance margin, we reduce the risk of malfunction in adverse weather conditions such as fog, snow, and heavy rain. ■Wide Pitch By expanding the vertical and horizontal dimensions of the beam compared to conventional models, and in conjunction with the four-stage beam simultaneous blocking method, we significantly reduce false alarms caused by birds and fallen leaves. ■Energy-Efficient Design We have significantly reduced the current consumption (to less than 50% compared to our previous models). This allows for the use of a smaller power supply than before, eliminating the need for thick wiring even in long-distance installations, thereby greatly reducing wiring material costs. ■Green Design We comply with the environmentally conscious RoHS directive. (We eliminate lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers.) *RoHS: A directive established by EU member states that restricts the use of specific hazardous substances in electrical and electronic equipment.

• Security Sensor Systems

■Simultaneous Two-Beam Blocking Method The AND method requires both infrared beams from the upper and lower sections to be blocked simultaneously to avoid false alarms caused by indoor insects, significantly reducing malfunctions. ■Modulation Frequency Switching Function Effective when multiple units are installed. By switching the modulation frequency of the pulse beams from the transmitter and receiver, mutual interference is prevented. (Switching between modulation frequencies from 1ch to 4ch is possible.) ■Variable Response Speed Function The light-blocking response speed can be adjusted from 0.05 to 0.7 seconds using a variable volume control. This allows for countermeasures against false alarms tailored to the specific environment. ■User-Friendly Design - Equipped with an AGC (Automatic Gain Control) circuit. - Includes a monitor jack.

• Security Sensor Systems

It can accurately record situations even in harsh environments. The maximum continuous recording time is approximately 9 hours. It can be utilized in various scenes such as on-site inspections and preventing the recurrence of accidents. - I want to record all work at dangerous sites. - I want to eliminate accidents caused by confirmation errors or carelessness. - I want to clarify responsibility in case of an accident. - I want to use videos to simulate work during in-house training. - I want to confirm the content of meetings held on-site later.

• Security cameras and surveillance systems

■Strong against stray light (Dual modulation method) Our unique dual modulation method and photoelectric conversion circuit [patented technology] enhance the ability to distinguish between stray light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■Strong against harsh environments (Two-stage high-power beam) By adopting a high-power beam with 100 times sensitivity margin and 10 times distance margin, we reduce malfunctions during adverse weather conditions such as fog, snow, and heavy rain. ■Energy-efficient design (Low current consumption) Compared to conventional products (PB-TE series), current consumption is reduced by over 40%. It can be supported by a smaller power supply than before. ■Green design (Compliance with RoHS directive) It complies with the environmentally conscious RoHS directive. (Eliminates lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, bisphthalates, butyl benzyl phthalate, dibutyl phthalate, and diisobutyl phthalate.) ■Structure resistant to insect intrusion (Insect-proof and drip-proof design) With insect-proof bushings that encase the wires and a waterproof structure, we achieve dustproof, drip-proof, and insect-proof measures equivalent to IP55. The structure is designed to be less susceptible to insects and water (compared to our conventional products).

• Security Sensor Systems

■Strong against stray light (Dual modulation method) Our unique dual modulation method and photoelectric conversion circuit [patented technology] enhance the ability to distinguish between stray light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■Strong against harsh environments (Two-stage high-power beam) By adopting a high-power beam with 100 times sensitivity margin and 10 times distance margin, we reduce malfunctions during adverse weather conditions such as fog, snow, and heavy rain. ■Energy-saving design (Low power consumption) Compared to conventional products (PB-TE series), power consumption is reduced by over 40%. It can be supported by a smaller power supply than before. ■Green design (Compliance with RoHS directive) It complies with the environmentally conscious RoHS directive. (Eliminating lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, bisphthalates, butyl benzyl phthalate, dibutyl phthalate, diisobutyl phthalate) ■Structure resistant to insect entry (Insect-proof and drip-proof design) With insect-proof bushings and waterproof structures enveloping the wiring, we achieve dustproof, drip-proof, and insect-proof measures equivalent to IP55. The structure is designed to be less susceptible to insects and water (compared to our conventional products).

• Security Sensor Systems

■Strong against stray light (Dual modulation method) Our unique dual modulation method and photoelectric conversion circuit [patented technology] enhance the distinguishability from stray light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■Strong in harsh environments (2-stage high-power beam) By adopting a high-power beam with 100 times sensitivity margin and 10 times distance margin, we reduce malfunctions during adverse weather conditions such as fog, snow, and heavy rain. ■Energy-saving design (low current consumption) Compared to conventional products (PB-TE series), current consumption is reduced by over 40%. It can be supported by a smaller power supply than before. ■Green design (compliant with RoHS directive) Compliant with the environmentally conscious RoHS directive. (Eliminates lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, bis-phthalates, butyl benzyl phthalate, dibutyl phthalate, diisobutyl phthalate.) ■Structure resistant to insect intrusion (insect-proof and drip-proof design) With insect-proof bushings and watertight structures that envelop the wires, we achieve dustproof, drip-proof, and insect-proof measures equivalent to IP55. The structure is designed to be less susceptible to insects and water compared to our conventional products.

• Security Sensor Systems

■Strong against external light interference (Dual modulation method) Our unique dual modulation method and photoelectric conversion circuit [patented technology] enhance the ability to distinguish incoming light from external sources (such as sunlight and car headlights), achieving highly reliable surveillance. ■Beam setting possible in any direction Both the projector and receiver can rotate the internal optical system ±90° horizontally, allowing for arbitrary setting of the surveillance direction. ■User-friendly design Wide adjustment range (horizontal angle ±90°, vertical angle ±10°) ■Detection response time adjustment function The detection response speed can be continuously varied from 0.05 to 0.7 seconds using a volume control. This allows for countermeasures against false alarms based on the specific site conditions. ■Modulation frequency switching function This feature is effective when conducting linear surveillance with multiple infrared sensors or during multi-stage surveillance. By switching the modulation frequency of the pulse beams from the projector and receiver, mutual interference can be avoided. (Switching between modulation frequencies from 1CH to 4CH is possible) ■Two-stage beam simultaneous interruption method By adopting an AND method that does not trigger an alarm unless both upper and lower infrared beams are interrupted simultaneously, the risk of false activation due to momentary interruptions with time delays is reduced.

• Security Sensor Systems

■Compatible with single switch boxes It is compatible with commercially available single switch boxes (deep type), allowing for a neat installation with only a 7mm protrusion from the wall due to its slim design, enabling unobtrusive security. Additionally, the molded resin exterior (frame: white / cover: wine red) matches interior decor without compromising aesthetics. ■Light sensitivity adjustment function By attaching the cover to the main unit, it incorporates a light sensitivity adjustment function that automatically increases sensitivity. During installation or inspection, after adjusting the light axis with the cover removed, simply reattaching the cover will automatically enhance sensitivity, providing a more reliable security line. ■AGC circuit It includes an automatic gain control (AGC circuit) that maintains appropriate sensitivity based on the surrounding environment. ■Light power switch The light power can be switched, ensuring optimal sensitivity based on the installation distance. ■Alarm contact switch The alarm output contacts can be switched, making it compatible with any system. 〈a contact (closed during alarm) / b contact (open during alarm)〉

• Security Sensor Systems

■Ceiling or wall mounting options available It can be used for both ceiling and wall mounting, allowing for flexible installation locations. Its rounded, calming design matches well in any setting. ■Ideal for entrances, windows, and corridors It can be installed on door frames or walls, making it perfect for monitoring entrances, windows, and corridors. It can also be used in semi-outdoor areas (places not directly exposed to rain). ■Adjustable monitoring area The width of the monitoring area can be easily adjusted with a built-in lever. The depth of the area can also be adjusted with a switch, both with a single touch. ■Countermeasures against stray light Thanks to a special filter that efficiently cuts visible light and unique countermeasures against stray light, it is hardly affected by stray light. ■User-friendly design ● Comes with a sensitivity adjustment volume that can be adjusted according to the installation location. ● Equipped with an operation indicator light for convenient operation confirmation (red LED lights up during an alarm).

• Security Sensor Systems

■Direct Reflection Type Without Reflector Since it adopts a direct reflection method, a reflector is not required. ■Convenient Sensitivity Adjustment Volume It comes with a sensitivity adjustment volume that allows you to adjust the sensitivity according to the installation location. (It is set at the factory to detect a human body at 1 meter.) ■Wide Range of Applications It can accommodate a wide range of applications that require stationary detection. ■Easy Installation As it is a reflection type sensor with integrated light emission and reception parts, installation and wiring can be completed with just the main unit. ■User-Friendly Design ● It has a thin and compact size of 23.5mm in thickness. ● It has terminal connections, making wiring connections easy. ● It can be used as an embedded type by using an embedded plate (BP-5B, BP-5D: sold separately). ● Using L brackets (BL-5: sold separately) further expands its applications. ■Cautions for Using This Sensor Due to its operating principle, this sensor may not detect the following types of objects, so please be cautious: ● Objects with a surface that is glossy and close to a mirror finish. ● Objects with extremely low light reflectivity. 【Examples】 Clothing made of black wool, black glossy suits or scarves, leather products, items with laser coating.

• Security Sensor Systems

■Easy operation confirmation and optical axis adjustment It is equipped with an operation indicator light (red LED), making it easy to confirm operation. Additionally, the optical axis adjustment can be made solely on the sensor side. ■Easy installation As it is a reflective sensor with an integrated light-emitting and light-receiving part, wiring work is only required for the main unit. This also reduces effort during maintenance. ■Installation angle of the reflector can be up to 30° Using a retroreflective reflector, the incident angle of infrared light can accommodate up to 30° (±15°). This allows for flexible installation locations and expands its applications. ■User-friendly design ● Built-in ambient light compensation circuit. ● Capable of detecting stationary objects. ● Using L-bracket (BL-10 sold separately) further expands its applications. ● For new constructions, we recommend the recessed type, which does not stand out and does not compromise aesthetics. ● The recessed PR-10BAU comes with a mounting box (for 3-gang switch box).

• Security Sensor Systems

■Freely adjustable monitoring direction The sensor body can be adjusted within a range of 180° left and right, allowing you to freely set the monitoring direction. ■Easy operation confirmation and light axis adjustment It is equipped with an operation indicator light (red LED), making it easy to confirm operation. Additionally, the light axis adjustment can be made solely on the sensor side. ■Easy installation As it is a reflective sensor with an integrated light-emitting and light-receiving unit, wiring work is only required for the main unit. This also reduces effort during maintenance. ■Installation angle of the reflector can be up to 30° Using a retroreflective reflector allows for an incident angle of infrared light up to 30° (±15°), providing flexibility. This means installation locations are not limited, and applications can be expanded. ■User-friendly design ● Built-in ambient light compensation circuit. ● Capable of detecting stationary objects. ● Using L-brackets (BL-10 sold separately) further expands its applications. ● For new construction projects, we recommend the embedded type that does not stand out and does not compromise aesthetics. ● The embedded PR-10BAU comes with an embedded box (for 3-gang switch boxes).

• Security Sensor Systems

■Adopts two types of reflection methods The infrared beam is reflected by the human body passing through the area, and the infrared beam light entry method detects the light entering the main unit and outputs an alarm. ■Can be installed discreetly and neatly It is compatible with a single switch box, allowing for a neat installation. Additionally, the ultra-thin design with a protrusion of only 7mm during installation enables unobtrusive security. ■Easy to install Thanks to the integrated reflection method of the light-emitting and light-receiving parts, it can be used with wiring only to the main unit. This makes it possible to use the infrared sensor even in locations where wiring cannot be routed due to the building's structure. Furthermore, despite being a recessed type, it has a built-in optical axis adjustment function (±15° horizontally), making post-installation adjustments easy. ■Can detect stationary objects It can detect not only moving objects but also stationary ones, making it suitable for various applications, including security. ■User-friendly design ● Contact switching function that can be set according to the operating system (a contact/b contact) ● Tamper function to prevent vandalism ● Alarm indicator light for operation confirmation (red LED: lights up during alarm) ● Sensitivity adjustment according to the installation location is possible.

• Security Sensor Systems

■Adopts two types of reflection methods It employs an infrared beam interruption method that detects blockage by the human body between the main unit and the reflector, outputting an alarm. ■Can be installed discreetly and neatly It is compatible with a single switch box, allowing for a neat installation. Additionally, the ultra-thin design with a protrusion of only 7mm during installation enables unobtrusive security monitoring. ■Easy to install Thanks to the integrated reflection method that combines the light-emitting and light-receiving parts, it can be used with wiring only to the main unit. This makes it possible to use the infrared sensor even in locations where wiring cannot be routed due to the building's structure. Furthermore, despite being a recessed type, it includes an optical axis adjustment function (±15° horizontally), making post-installation adjustments easy. ■Can detect stationary objects It can detect not only moving objects but also stationary ones, making it suitable for various applications, including security. ■Uses a retroreflective reflector It uses a highly retroreflective reflector, so as long as the incident angle is within 30° (±15°), it reflects in the direction of the sensor's optical axis, allowing for flexible installation locations and expanding its range of applications.

• Security Sensor Systems

■ Ideal for close-range monitoring It outputs an alarm signal when an intruder obstructs the path between the reflective sensor and the mirror. It is perfect for monitoring indoor entrances, hallways, stairs, and for notifying visitors at the front door. ■ Compact slim design The thickness of the sensor body is 23.5mm, making it as compact as a pocket calculator. The color and design have been carefully considered to allow for inconspicuous installation on walls, ensuring it does not create any sense of discomfort. ■ Easy installation This is a reflective sensor with an integrated light emission and reception unit, so wiring work is only needed for the main unit. Additionally, maintenance is simplified. ■ Excellent disturbance light characteristics Thanks to a special filter that efficiently cuts visible light and unique measures against disturbance light, it is hardly affected by external light sources such as sunlight. ■ Reflective mirror can be installed within a 30° range Using a retroreflective mirror allows for a comfortable incidence angle of infrared rays up to 30° (±15°). This means installation locations are not limited, and applications are broadened. ■ User-friendly design ● Can be used with a wide range of voltages. (DC10.5V to 26V)

• Security Sensor Systems

■ Convenient one-sided wiring allows for outdoor monitoring up to 30m! This is a reflective infrared sensor with an integrated projector and receiver. Since the wiring is only for the sensor body (one-sided wiring), it is recommended for places where double-sided wiring is difficult. Additionally, maintenance is hassle-free. ■ By using a distance measurement method, it reliably detects objects Not only does it monitor the amount of light reflected back from the light projected by the sensor, but it also measures the distance based on the time it takes for the light to return. This makes it less susceptible to the influence of the surrounding environment, the material, and color of the object, ensuring reliable detection. It also prevents missed detections caused by light reflections from walls in the middle of the monitored area. ■ Can be installed both outdoors and indoors Installation can be done regardless of whether it is outdoors or indoors. It can monitor up to 40m indoors, and the reflector hood can also be removed.

• Security Sensor Systems

■ Convenient one-sided wiring It can be used with one-sided wiring, making it suitable for locations where dual-sided wiring is difficult. Since the lighting and receiving parts are integrated into a reflective sensor, the wiring work only involves the sensor body. Additionally, maintenance is hassle-free. ■ Installable both outdoors and indoors The installation location is not limited to outdoors or indoors. It comes with two types of attenuation sheets for adjusting the light axis, one for outdoor use and one for indoor use. Mounting brackets for poles are also included as standard. (Compatible poles: φ38 to φ45mm) ■ Easy light axis adjustment Light axis adjustment can be done at just one location on the sensor. The adjustment is performed using a sighting device, the included attenuation sheet, and the light sensitivity indicator. ■ Excellent disturbance light characteristics By adopting a special filter that efficiently cuts visible light and enhancing the disturbance light compensation circuit, it is unaffected by changes in illumination of up to 50,000 lux. Influences from sunlight, mercury lamps, fluorescent lights, and car headlights do not pose a problem under normal usage conditions. ■ Freely adjustable monitoring direction The lens can be moved horizontally (±90°) and vertically (±10°), allowing for flexible setting of the monitoring direction, which does not limit the installation location and expands its applications.

• Security Sensor Systems

■Ideal for security at CD and ATM corners, windows, and corridors! This is a compact type with the amplifier section (control box) and sensor section separated, allowing installation with only the exposed part being the sensor head (W30×H50mm), enabling discreet security for CD and ATM machines. It can also be used for detecting passing objects at windows, corridors, doors, and for integration into HA equipment, making it suitable for a wide range of applications. ■Realization of a compact control box The control box has been miniaturized to W:45mm H:120mm D:29mm. It can be installed in various locations with minimal space. ■Wide detection range of up to 20m The sensor sections on the transmitter and receiver sides can detect up to a distance of 20m, allowing installation in wide corridors and entrances of large facilities. ■Connection cables can be freely cut Both the transmitter and receiver sides have connection cables that can be freely cut, allowing for neat installation in spaces under 20m without bundling the cables. ■Sensitivity adjustment volume It comes with a sensitivity adjustment volume that allows the sensitivity of the sensor to be adjusted according to the installation distance.

• Security Sensor Systems

■Ideal for security at CD and ATM corners, windows, and corridors The PB-6Sa/6Sb is an ultra-compact opposing infrared sensor with a separated amplifier section, and since the exposed part is only the sensor head (diameter 15mm), security for CD and ATM machines can be conducted discreetly. It can also be used for a wide range of applications such as detecting passing objects at windows, corridors, doors, and for integration into HA devices. ■Realization of compact amplifier section The amplifier section has been miniaturized to W:45mm H:94mm D:29mm. Additionally, the volume has been reduced by 40% compared to our conventional products, allowing for flexible installation locations. ■Cuttable connection cables Depending on the installation location, the connection cables for both the transmitter and receiver can be cut to the necessary length, eliminating the need to bundle them near the amplifier section and allowing for tidy wiring. ■User-friendly design ● The sensor head can be easily installed using a one-touch mounting method by simply drilling a 12mm hole and pushing it in. ● It features a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance.

• Security Sensor Systems

■Ideal for security at CD and ATM corners, windows, and corridors The PB-6Sa/6Sb is an ultra-compact opposing infrared sensor with a separated amplifier section, and since the exposed part is only the sensor head (diameter 15mm), security for CD and ATM machines can be conducted discreetly. It can also be used for a wide range of applications such as detecting passing objects at windows, corridors, doors, and for integration into HA devices. ■Realization of compact amplifier section The amplifier section has been miniaturized to W:45mm H:94mm D:29mm. Additionally, the volume has been reduced by 40% (compared to our conventional products), allowing for flexible installation locations. ■Cuttable connection cables Depending on the installation location, the connection cables for both the transmitter and receiver can be cut to the necessary length, eliminating the need to bundle them near the amplifier section and allowing for neat wiring. ■User-friendly design ● The sensor head can be easily installed using a one-touch mounting method by simply drilling a 12mm hole and pushing it in. ● It features a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance.

• Security Sensor Systems

The security house, well-versed in the latest access control systems, will propose planning solutions. In our series catalog, we offer a wide range of access control systems tailored to various purposes, so please utilize it for product selection. ■ Access Control Systems 1. Small-scale, simple function systems - ACsmart - GG-Slim 2. Medium-scale, multifunction systems - MELSAFETY-Px - id・Techno eS - GG-1 3. UHF band RFID systems - tranSpeed 4. Simple facial recognition unit - ACS-F500 5. 1CH key cassette - KC-1 ■ Verification Switch Series 1. Voice-enabled non-contact card switch 2. Keypad switch ■ Electric Lock Control 1. Single line - DM-110K - M32BM(J)/M32M(J) - DM-700 - RSP-200TKR/RSP-200TKU 2. Multi-line - CE-1000/CE-1BKT - BAN-AS

• Security Sensor Systems
• Entrance and exit control system
• Entrance/exit management and personal identification system

The security house, well-versed in the latest coronavirus infection prevention measures, will propose planning. In the catalog, we have a wide range of infection prevention systems tailored to various purposes, so please use it for product selection.

• Other security systems
• Security devices
• Security Sensor Systems

■Realization of miniaturization of the control box section Achieved miniaturization of the control box section with dimensions W: 45mm H: 120mm D: 29mm. It can be installed in various locations with minimal space. ■Series of two models: opposing type and reflective type To accommodate various applications, two models have been developed in a series: the opposing type (for 10m) and the reflective type (for 4m). You can choose the model according to your needs. ■Prevention of mutual interference with scanning two beams The infrared light is scanned, preventing mutual interference of the infrared signals. ■AND/OR detection switching function Equipped with an AND/OR detection switching function, it can also be used as a single beam. Initially, it can be used as a single beam, and if needed, it can be upgraded to a double beam by adding a sensor head. ■Thin sensor head section with one-touch installation type The sensor head section adopts a one-touch installation type that can be installed simply by drilling a hole and pushing it in. ■User-friendly design ● Comes with a sensitivity adjustment volume that allows adjustment of the sensor's sensitivity according to the installation distance. ● Both the emitting and receiving parts have connection cables that can be freely cut.

• Security Sensor Systems

■Realization of miniaturization of the control box section Achieved miniaturization of the control box section with dimensions of W: 45mm H: 120mm D: 29mm. It can be installed in various locations with minimal space. ■Series of two models: opposing type and reflective type To accommodate various applications, two models have been developed: the opposing type (for 10m) and the reflective type (for 4m). You can choose the model according to your needs. ■Prevention of mutual interference with scanning two beams The infrared light is scanned, preventing mutual interference of the infrared signals. ■AND/OR detection switching function Equipped with an AND/OR detection switching function, it can also be used as a single beam. Initially, it can be used as a single beam, and if needed, additional sensor heads can be added to use it as a double beam. ■Slim sensor head section with one-touch installation type The sensor head section adopts a one-touch installation type that can be installed simply by drilling a hole and pushing it in. ■User-friendly design ● Comes with a sensitivity adjustment volume that allows the sensor's sensitivity to be adjusted according to the installation distance. ● The connection cables for both the emitting and receiving sections can be freely cut.

• Security Sensor Systems

■Ideal for security around CD/ATM corners and windows/corridors It can be used for detecting residual individuals near financial institution CD/ATM machines, securing areas around electric shutters, as well as for detecting passing objects near windows, corridors, toilets, and doors, making it suitable for a wide range of applications. ■Ultra-compact control box The control box measures W:45mm H:120mm D:29mm, making it ultra-compact. It can be installed in various locations with minimal space. ■Two types in a series: opposing type and reflective type To accommodate various applications, two types are available in a series: opposing type (for 10m) and reflective type (for 4m). You can choose the model according to your needs. ■User-friendly design ● Built-in sensitivity adjustment volume allows for optimal sensitivity adjustment based on installation distance. ● Switchable a contact/b contact. ● The sensor head uses a one-touch installation type that can be easily attached by drilling a pilot hole and pushing it in. ● Both the projector and receiver can have their connection cables cut to the necessary length, allowing for tidy wiring without the need to bundle them near the amplifier section.

• Security Sensor Systems

A security house well-versed in the latest crime trends, methods, and entry routes offers security planning. Our catalog features a wide range of security and disaster prevention systems tailored to your needs, so please use it to assist in product selection. 【Main Featured Products】 ■ Access Control System ■ Intruder Detection System ■ Emergency Notification System ■ Emergency Response Goods ■ Intrusion and Theft Prevention System ■ Restroom Usage Notification System ■ Anti-Surveillance System ■ Vehicle Burglary Prevention System ■ Surveillance Camera System

• Security Sensor Systems
• Security devices
• Security cameras and surveillance systems

■Ideal for security around CD/ATM corners and windows/corridors This device can be used for various purposes, such as detecting residual individuals near financial institution CD/ATM machines, securing areas around electric shutters, and detecting passing objects near windows, corridors, toilets, and doors, as well as for integration with HA equipment. ■Ultra-compact control box The control box measures W:45mm H:120mm D:29mm, making it ultra-compact. It can be installed in various locations with minimal space. ■Two types in a series: opposing type and reflective type To accommodate various applications, two types have been developed in a series: opposing type (for 10m) and reflective type (for 4m). You can choose the model according to your needs. ■User-friendly design ● Built-in sensitivity adjustment volume allows for optimal sensitivity adjustment based on installation distance. ● Switchable a contact/b contact. ● The sensor head uses a one-touch installation type that can be mounted simply by drilling a hole and pushing it in. ● Both the projector and receiver can have their connecting cables cut to the necessary length, allowing for tidy wiring without the need to bundle them near the amplifier section.

• Security Sensor Systems

Wide-range, long-distance surveillance area The unique surveillance area can monitor a wide range and long distance, with a surface surveillance type capable of a 50m range. ■ Installable outdoors and indoors It can be installed not only outdoors but also indoors. Since it is installed on one side only, it can easily provide surveillance in places where opposing infrared sensors cannot be installed. ■ Sturdy housing case It uses an AES resin housing case, improving impact resistance and weather resistance. There is less concern about deterioration from direct sunlight and wind and rain outdoors, and the standard steel plate long hood reduces the impact of bird droppings. ■ Rainproof structure Even in places exposed to wind and rain, such as under eaves of buildings or on freestanding poles, the excellent weather-resistant packing structure prevents water intrusion. (If installing with exposed wiring, please use the included waterproof bushing or conduit.) ■ Features that assist in operation and inspection after installation ● Equipped with a sighting device A sighting device is included to easily set and adjust the surveillance area. ● C contact output The alarm contacts use long-lasting, silent, non-voltage semiconductor contacts to form the C contacts.

• Security Sensor Systems

■Wide-range, long-distance surveillance area The unique surveillance area can monitor a wide range and long distance, with a three-dimensional surveillance type capable of monitoring up to 30m and a surface surveillance type up to 50m. ■Installable outdoors and indoors It can be installed not only outdoors but also indoors. Since it is installed on one side only, it can easily provide surveillance even in places where opposing infrared sensors cannot be installed. ■Robust housing case Adopting a housing case made of AES resin, it has improved impact resistance and weather resistance. There is less concern about deterioration from direct sunlight and rain outdoors, and the standard steel plate long hood reduces the impact of bird droppings. ■Rainproof structure Even in locations exposed to wind and rain, such as self-supporting poles or under eaves of buildings, the excellent weather-resistant packing structure prevents water intrusion. (When installing with exposed wiring, please use the included waterproof bushing or conduit.) ■Functions that assist in operation and inspection after installation ●Equipped with a sighting device A sighting device is equipped to easily set and adjust the surveillance area. ●C contact output The alarm contact uses long-lasting, silent, non-voltage semiconductor contacts to form the C contact.

• Security Sensor Systems

■Can be installed outdoors and semi-outdoors It has a rainproof structure, allowing installation not only indoors but also outdoors and semi-outdoors. Moreover, it can be mounted on ceilings, walls, and poles, so it does not limit the installation location. Additionally, the pitch of the mounting base is compatible with commercially available embedded boxes, allowing for a neat installation. ■Fits into exteriors It has a rainproof structure, allowing installation not only indoors but also outdoors and semi-outdoors. Moreover, it can be mounted on ceilings, walls, and poles, so it does not limit the installation location. Additionally, the pitch of the mounting base is compatible with commercially available embedded boxes, allowing for a neat installation. ■Supports simple outdoor security This passive sensor can meet the needs for simple security in locations where near-infrared beam sensors cannot be installed or where the design of the exterior is prioritized. (However, please avoid using it for serious security or surveillance systems.) ■One-touch angle adjustment With a new type of angle adjustment mechanism, the sensor's angle can now be adjusted up and down, left and right with just one touch.

• Security Sensor Systems

■Can be installed outdoors and semi-outdoors Due to its rainproof structure, it can be installed not only indoors but also outdoors and semi-outdoors. Moreover, it can be mounted on ceilings, walls, and poles, allowing for flexible installation locations. Additionally, the pitch of the mounting base is compatible with commercially available embedded boxes, enabling a neat installation. ■Fits well with exteriors With a novel design that has never been seen before, it perfectly fits into exterior coordination. Its smart design matches well in various locations, whether indoors or outdoors. ■Supports simple outdoor security This passive sensor can meet the simple security needs in places where near-infrared beam sensors cannot be installed or where the design of the exterior is prioritized. (However, please avoid using it for serious security or surveillance systems.) ■One-touch angle adjustment With a new type of angle adjustment mechanism, the sensor's angle can be adjusted up and down, left and right with just one touch. ■User-friendly design ● Equipped with an operation indicator light for convenient operation confirmation. (Lights up when detecting) ● Flexible installation with three types of options. ● Wide detection area (3D detection type 15m x 15m, linear detection type 30m)

• Security Sensor Systems

■Detection possible only at close range Detection range has been made possible only at close distances of 2m to 12m [10 levels]. ■Adoption of AND detection in two directions: horizontal area and downward area The detection method outputs a detection signal only when both the horizontal area and downward area detect, reducing false triggers caused by small animals like dogs and cats, as well as false triggers from excessive detection area extension, allowing for more stable security outdoors. ■Window surveillance possible through area adjustment By adjusting the area with the included area mask sheet, window surveillance is possible. The MS-12FA can monitor windows on both sides by installing one unit centrally with its two sensors in the upper and lower sections. ■Outdoor installation possible Due to its rainproof structure, it can be installed outdoors. It can be mounted on walls and poles, allowing for flexible installation locations. (Additional mounting brackets are required for pole installation.) ■Day and night discrimination function Equipped with a day and night discrimination function that controls output based on surrounding brightness. It can operate only at night. (Variable from approximately 10lx to infinity)

• Security Sensor Systems

■ Adoption of 2-direction AND detection for horizontal and downward areas The detection method outputs a detection signal only when both the horizontal area and downward area detect something, reducing false alarms caused by small animals like dogs and cats, as well as false alarms due to excessive extension of the detection area, enabling more stable security outdoors. ■ Two sensors in upper and lower sections for a 180° horizontal surveillance area: MS-12FA only With two sensors positioned in the upper and lower sections, a 180° horizontal surveillance is possible. Additionally, the detection method allows for the selection of AND detection or OR detection between the upper and lower sections. ■ Window surveillance possible through area adjustment By adjusting the area with the included area mask sheet, window surveillance is possible. The MS-12FA can monitor windows on both sides by installing one unit at the center, utilizing the two sensors in the upper and lower sections. ■ Outdoor installation possible Due to its rainproof structure, it can be installed outdoors. It can be mounted on walls and poles, allowing for flexible installation locations. (Additional mounting brackets are required for pole installation.) ■ Day and night discrimination function Equipped with a day and night discrimination function that controls output based on surrounding brightness. It can operate only at night. (Variable from approximately 10lx to infinity)

• Security Sensor Systems

■Features This is a passive sensor that detects thermal radiation emitted from the human body and outputs relay contact signals, suitable for both indoor and outdoor use. ■Adoption of 2-direction AND detection for horizontal and downward areas The detection method outputs a detection signal only when both the horizontal area and downward area are detected, reducing false triggers caused by small animals such as dogs and cats, as well as false triggers due to excessive detection areas, enabling more stable security outdoors. ■180° horizontal surveillance area with two sensors in upper and lower positions With two sensors located in the upper and lower positions, it allows for 180° horizontal surveillance. Additionally, the detection method can be selected between AND detection and OR detection for the upper and lower positions. ■Window surveillance possible through area adjustment By adjusting the area with the included area mask sheet, window surveillance is possible. The MS-12F-N can monitor windows on both sides by installing one unit centrally with its two sensors in the upper and lower positions. ■Outdoor installation possible It has a rainproof structure, making it suitable for outdoor installation. It can be mounted on walls and poles, allowing for flexible installation locations. (Separate mounting brackets are required for pole installation.)

• Security Sensor Systems

■ Adoption of 2-direction AND detection for horizontal area and downward area The detection method outputs a detection signal only when both the horizontal area and downward area detect something, which reduces false triggers caused by small animals like dogs and cats, as well as false triggers due to excessive detection area extension, enabling more stable security outdoors. ■ Outdoor installation possible It has a rainproof structure, allowing for outdoor installation. It can be mounted on walls and poles, so it does not limit the installation location. (Additional mounting brackets are required for pole installation.) ■ Day/night discrimination function Equipped with a day/night discrimination function that controls output based on surrounding brightness. It can operate only at night. (Adjustable from approximately 10lx to infinity) ■ Sensitivity adjustment volume It has a built-in sensitivity adjustment volume that allows fine-tuning of sensitivity according to the installation environment, application, and operating conditions. The sensitivity for detecting human bodies can be adjusted in the range of approximately 30% to 170%. ■ Convenient features and user-friendly design ● The power supply voltage ranges from 10.5 to 30V (no polarity). ● It has a count switching function that allows for changing the number of sensor counts (1 time/3 times). ● There is a tamper output on the main unit. ● It includes an operation indicator light for convenient operation confirmation (red LED).

• Security Sensor Systems

■Triple mirror that forms a unique area Equipped with three sets of optical units in the sensor. This is a new type of passive sensor that features twin-type elements (newly developed) in each unit. The area formed by the three sets of optical units significantly reduces false alarms and malfunctions due to its unique layout design. Additionally, the design resembles an outdoor light, and the internal structure allows for area adjustment (movable mirrors), making it difficult to infer the direction of the area from the appearance, thus enhancing security. ■Reduction of malfunctions caused by small animals By adopting independent detection units for each mirror, signal processing reduces malfunctions caused by small animals such as cats. Furthermore, by using the pet mode (only for three-dimensional vigilance type), it becomes possible to cancel out medium-sized dogs (approximately 50 cm in height), allowing for operation in homes with pets. Additionally, by attaching a bird stopper to the top, it becomes less likely for birds to perch, significantly reducing unexpected malfunctions.

• Security Sensor Systems