エヌエフ回路設計ブロック List of Products and Services

The Piezo Resonance Point Tracking Module PD-660-S1 is a control module specialized for tracking the resonance points of piezoelectric elements, making it suitable for integration into various ultrasonic application devices. By connecting it to a piezo drive amplifier, it can automatically track the resonance points of devices such as BLTs (Langevin transducers) while enabling optimal drive. Adjusting various parameters is also easy, which can lead to reduced development time and cost savings.

• others

We meet the needs for AC power in a wide range of fields, including home appliances, electronic components, industrial equipment, medical devices, housing equipment, and amusement machines. ■Stable output ■High efficiency ●Single-phase 2kVA ●Frequency: DC, 1 Hz to 550 Hz ●AC output: 0 Vrms to 350 Vrms ●DC output: 0 V to ±454 V ●Current limiter function ●Protection function ●Measurement function ●Parallel connection of 2 units (single-phase 4kVA) *For more details, please refer to the PDF document or feel free to contact us.

• others

Maintaining the stable output performance of the DP series, it supports capacity expansion and multi-phase configuration through multiple connections. By simply connecting a single-phase 2 kVA, 3U model with a system cable, system upgrades are possible. Expansion and reconfiguration are easy. ● Flexible system construction Single-phase 2kVA / 4kVA / 6kVA / 8kVA / 12kVA / 18kVA Single-phase 3-wire 4kVA / 8kVA / 12kVA Three-phase 6kVA / 12kVA / 18kVA ● Wide bandwidth DC, 1 Hz to 5 kHz ● AC output 0 V to 350 Vrms DC output 0 V to ±454 V *For more details, please refer to the PDF document or feel free to contact us.

• others

Equipped with the performance and functions necessary to easily output various waveforms required in measurement and testing environments. The oscillation frequency ranges from 0 to 60 MHz (WF1983/WF1984) / 0 to 30 MHz (WF1981/WF1982), enhancing the reproducibility of tests with low distortion, high-quality waveforms. In addition to the main output, it features a sub-output capable of independent waveform output, a rich variety of output waveforms including double pulses used for power device evaluation, diverse oscillation modes, and sequence functions to support waveform output. 【Features】 ■ Oscillation frequency: 0 to 60 MHz (WF1983/WF1984) / 0 to 30 MHz (WF1981/WF1982), resolution: 0.01 μHz ■ High amplitude resolution: 16-bit, amplitude setting: 21 Vp-p/open ■ Output waveforms: sine wave, square wave, pulse wave, ramp wave, noise, DC, and 26 types of "parameter-variable waveforms" ■ Low distortion, jitter ■ Sub-output function ■ Parameter-variable waveforms ■ Variable pulse edge *For more details, please refer to the PDF document or feel free to contact us.

• others

A lock-in amplifier equipped with the reliability required for measuring small signals. Its core components have been condensed into a compact size. By integrating it into the signal detection parts of analyzers and inspection devices, a significant improvement in the signal-to-noise ratio can be expected. It is designed for embedded use with a simple design that eliminates the display and operation sections, controlled via USB/LAN from a PC.

• others

We have made it possible to conduct various tests related to high-voltage receiving equipment and cogeneration facilities, which were previously carried out by combining multiple models, in a single unit. This can be utilized for protection function tests in commercial facilities, office buildings, and factories. In addition to being compact and lightweight, the design takes actual work conditions into consideration, aiming to improve the workability at maintenance sites. 【Features】 ■ Voltage: 2 phases (up to 300V per phase), Current: 2 phases (up to 31A per phase) Diverse outputs from single-phase to three-phase three-wire (V connection), and unbalanced two-phase ■ Equipped with a microcurrent output range of 20mA (resolution 0.001mA) ■ Easy digital setting for high-accuracy amplitude, phase, and frequency output ■ Built-in counter allows for operation time measurement ■ Supports various protection relay tests Over/under voltage, over/under frequency, short-circuit direction, under power, reverse power, field loss, earth fault overvoltage, earth fault overcurrent, earth fault direction, overcurrent, ratio differential, phase loss/reverse phase ■ CB interlocking tests possible with two-phase current in series ■ Usable with generator sets (inverter type) and portable power supplies *For more details, please refer to the PDF document or feel free to contact us.

• Information and communication equipment and infrastructure

A system that analyzes AE signals by combining measuring devices and measurement/analysis software. It is equipped with two types of application software to analyze "continuous AE signals" generated by friction and wear, as well as "spike AE signals" caused by cracks and damage. We offer the 2-channel AE9702S, AE9702, and the 1-channel AE9701.

• Other measuring instruments

In addition to its large capacity and high power, this distortion-free relay tester is equipped with output switchers and DC outputs, demonstrating excellent performance in various testing scenarios.

• Analysis and prediction system

A noise filter transformer is a transformer that blocks noise propagating through commercial power lines. It effectively works against noise entering in both normal and common modes, has a wide stop frequency range, is bidirectional, and does not require impedance matching. There are two types available: 500VA and 1000VA.

• others

This is an AC voltmeter that accurately indicates the true effective value. The M2170A has a wide bandwidth of 5Hz to 20MHz, while the M2174A/M2177A features ultra-high sensitivity with full scales of 10μV/30μV, and they are equipped with various auditory correction filters, allowing them to be used as noise meters. They meet the needs of analog meter-type measuring instruments for noise measurement in the development and production of digital AV equipment and electronic musical instruments, as well as in the development, production, and maintenance of railway signal systems.

• Other analytical equipment

The LI-76A is a current-to-voltage converter used to detect signals from high-impedance sensors such as photomultiplier tubes with a lock-in amplifier.

• Other measuring instruments

The LI-75A is a preamplifier used to improve the sensitivity of lock-in amplifiers and to eliminate common mode noise. With a gain of 100 times and a wide bandwidth from DC to 1 MHz, it can also be used as a general-purpose preamplifier.

• Other analytical equipment

This is a high-precision, high-functionality, low-cost function generator that adopts the DDS (Digital Direct Synthesis) method. It achieves a wide bandwidth of 0.1mHz to 2MHz and can output various standard waveforms and arbitrary waveforms with high accuracy. Additionally, it is equipped with a variety of oscillation modes including trigger/gate/burst, a USB interface, and a power input compatible with worldwide standards.

• Other measuring instruments

The AE9501B is used in combination with a piezoelectric AE sensor (sold separately). When AE is detected, the event lamp of this device lights up. It is a lightweight handheld AE tester that operates on four AA batteries.

• Other analytical equipment

They are lined up according to resonance frequency, shape, and other factors. Generally, the resonance frequency of the sensor is brought closer to the frequency of the AE signal to improve sensitivity.

• Other analytical equipment

A preamplifier that amplifies to the necessary level for analyzing AE signals. Four models are available, featuring different frequency ranges, input formats, and fixed/switchable gain types.

• Other analytical equipment

The 4500 series is a wideband, high-output precision power amplifier capable of outputting up to ±200V from DC to 20kHz. Four models are available with output voltages ranging from 250VA to 2kVA, and by using boosters, it can be upgraded to 10kVA (single-phase) for every 2kVA. It is suitable not only as a power amplifier but also as a simulation power supply and AC power supply, accommodating various applications including power environment testing.

• others

The 3620 series is a two-channel frequency-variable filter that allows you to freely set the cutoff frequency. You can choose from four types of lineups based on the attenuation slope and cutoff frequency range. It operates independently in two channels, allowing you to switch between low-pass, high-pass, band-pass, and band-elimination modes, and it also supports cascading of the two channels.

• Other measuring instruments

Integration of filters and amplifiers necessary for measuring the SN ratio, dynamic range, total harmonic distortion rate, channel separation, and intermodulation distortion rate of CD players.

• Other analytical equipment

This is a storage case designed to simplify the use and connection of various functional device modules in multi-channel applications. By inserting our resistance-tuned filter module SR/SRA series into the internal socket and soldering the component resistors to the platform (which allows for easy insertion and removal), it becomes possible to set the filter characteristics and frequency. There is a wide variety of built-in filter types, allowing you to select characteristics suitable for your application.

• Other measuring instruments

The 5325 is a wideband, low-noise, high-gain, high-voltage isolation amplifier with electrically isolated input and output. It is suitable for signal detection at high voltages, interfacing between devices with different reference potentials, and noise prevention measures for measurement instrument inputs against external noise (ground separation).

• Other measuring instruments

The 5307 is a low-noise preamplifier with a differential input format that has a wide bandwidth of DC to 10MHz and a maximum gain of 1000 times. It integrates necessary functions for amplifying small signals, such as input format switching, offset cancellation, and bandwidth-limiting filters, making it suitable for a wide range of applications as a general-purpose preamplifier or differential amplifier.

• Other measuring instruments

High-accuracy voltage and current measurement, capable of up to 4 inputs, power multi-meter. Seven items: voltage, current, active power, apparent power, reactive power, power factor, and phase.

• others

It is a three-phase distortion-free relay tester. Output capacity is 100 VA per phase in the 125 V range. In addition to AC output, it also provides DC output.

• Other measuring instruments

The FRA5014 is a 4-channel input servo analyzer designed for integration into production lines and systems. It is exclusively for remote control, and operations such as parameter settings, readings, and command inputs are performed via a PC. It provides high-precision and reliable measurements in various fields, including electronic circuits, components, materials, electrochemistry, and mechanics, starting with the measurement of resonance characteristics of servo loop components, as well as various servo characteristic measurements and electrochemical impedance measurements.

• Other analytical equipment

The FRA5022 is a frequency characteristic analyzer with a measurement frequency range of 0.1 mHz to 100 kHz. Its operation is simple and user-friendly, and its slim, space-saving design makes it suitable for production lines and system integration. The frequency characteristic analyzer (FRA) utilizes the excellent noise reduction characteristics of the digital Fourier integral method to measure the frequency response of the subject under test with high precision. It is used in a wide range of applications across various fields, including the evaluation of stability in servo systems and switching power supplies, as well as AC impedance measurements of fuel cells, covering electronic circuits, electronic materials, machinery, and electrochemistry.

• others

Isolation / Supports maximum input voltage of 600V CAT II / 300V CAT III. Compared to conventional models, it is capable of measuring higher voltage signals. Additionally, it is equipped with various new features that enhance work efficiency, such as a marker search function for easily retrieving measurement values and a sequence measurement function that reads the contents of the setting memory in numerical order for sweep measurements.

• others

The ES-E is a lineup of packaged models with commonly used capacities for single-phase, single-phase three-wire, and three-phase systems. It is an ideal system for those who are introducing programmable AC power supplies for the first time, as well as for those considering additional installations or replacements.

• others

The ES series is a programmable AC power supply that can flexibly construct various power systems ranging from single-phase 2kVA to three-phase 90kVA*. With our long-standing linear amplifier-based power control (linear power control), we provide fast and high-quality power. It also supports the fast response and harmonic superposition required for EMC testing, as well as the reverse flow necessary for power conditioner (PCS) grid interconnection testing, allowing for tests that meet the conditions required for standard and certification tests.

• others

The WS series is a signal generation module capable of producing high-accuracy and high-stability signals over a wide range of frequencies. It features a lineup of four models, with two multifunctional types capable of arbitrary waveform output, as well as supporting modulation and sequence operations. The two models with 36-pin DIP can output multi-phase signals through inter-module synchronization.

• others

The programmable current amplifier CA5351 is a gain-variable type current input - voltage output amplifier. It achieves an unparalleled combination of high gain and wide bandwidth, and it also supports fast response. Due to stable operation against input added capacitance, there is no overshoot or ringing in pulse response. In addition to high performance, usability has also been pursued, making it suitable for a variety of microcurrent measurements, from cutting-edge research to industrial applications, including synchrotron radiation facilities. 【Features】 ■ High gain: 10³ to 10¹⁰ V/A (8 ranges, 10 times step) ■ Wide bandwidth: DC to 500 kHz (10⁶ V/A), DC to 70 kHz (10⁹ V/A) ■ Fast response: 0.7 μs (10⁶ V/A) ■ Low noise ■ Current suppression: ±8 nA to ±8 mA (7 ranges) *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "WP Series" is a high-capacity auto-ranging DC power supply that can cover the output of multiple power sources with a single unit, featuring a current and voltage operating range that is three times larger. By simply connecting with cables, it is easy to build a high-capacity system. It can connect up to 50 units, allowing the 18kW model to support a maximum capacity of 900kW. We offer a lineup of multifunctional models that support battery simulation and ATE embedded models. Please choose according to your application and budget. 【Features】 ■ Auto-ranging output ■ High capacity and space-saving ■ Maximum output voltage: 80V to 1950V ■ Parallel connection: up to 50 units ■ Maximum output current: 23A to 540V *For more details, please refer to the PDF materials or feel free to contact us.

• DC Power Supply

The "VP Series" is a programmable DC power supply that allows for flexible construction of various power systems. Its slim design for 19-inch rack storage enables the construction of multi-channel systems in a space-saving manner. Please choose the appropriate power from a wide range of voltage and current combinations. 【Features】 ■ High-resolution output settings with 16-bit D/A ■ 16 settings storage memories ■ Starts with the settings from the last power-off ■ Series operation of 2 units and parallel operation of up to 5 units ■ Protection features: overvoltage, overcurrent, overheating *For more details, please refer to the PDF materials or feel free to contact us.

• DC Power Supply

The "CM Series" is a single-output DC power supply that adopts a switching method with a maximum output of 1080W. The maximum output voltages are 30V, 80V, 160V, 250V, and 800V, with a total lineup of 15 models. Equipped with various interfaces, it supports three rack sizes: 1/2, 1/3, and 1/6, making it suitable as a power supply for various test systems. Additionally, it can be used as a DC power supply with double the voltage when connected in series and three times the current when connected in parallel with the same model. 【Features】 ■ Output Voltage: 30V/80V/160V/250V/800V ■ Abundant Interfaces ■ Adjustable Output, Switching Method, CV/CC ■ High Efficiency and High Power Factor ■ Series and Parallel Connection *For more details, please refer to the PDF document or feel free to contact us.

• DC Power Supply

The "CL3000 Series" is a multifunctional DC electronic load that supports a wide range of tests for various power supplies. It can be programmed for various load simulations, from static loads to complex dynamic loads. When combined with our DC power supplies, the "VP Series" and "CM Series," it accommodates a wide range of applications, including load characteristic tests and aging tests for DC-DC converters, charge and discharge tests for batteries, and characteristic evaluations of various electronic components. 【Features】 ■ Up to 5 units can be operated in master-slave parallel operation ■ 7 load modes: CC, CR, CV, CP, CC+CV, CR+CV, CP+CV ■ 2 operating modes: Static mode, Dynamic mode ■ Supports automated testing with programming and sequencing functions ■ Equipped with a color LCD that excels in operability and visibility *For more details, please refer to the PDF document or feel free to contact us.

• others

The "HSA Series" is a high-speed bipolar power supply that can stably drive DUTs (Devices Under Test) that cannot be driven by other power supplies or amplifiers, starting with electronic components such as capacitors and coils, and is used in various device testing. It features stable output that does not depend on the load, covering a wide range of applications. It is widely used in advanced research fields such as medical and biotechnology. 【Features】 ■ Four-quadrant output ■ Stable output for capacitive and inductive loads ■ Fast response: DC to 1 MHz / DC to 500 kHz ■ Maximum output voltage: 150 Vp-p / 300 Vp-p ■ Low output impedance ■ Total of 5 models *For more details, please refer to the PDF document or feel free to contact us.

• DC Power Supply

Introducing the LCR meter series that achieves stable measurements with high speed and high precision. The ZM series LCR meters cover a wide frequency range from 1 mHz in the low-frequency region up to a maximum of 5.5 MHz. With fast and consistent measurements with minimal variation, they cater to a wide range of applications from material research to component production lines. We offer three models: "ZM2371," "ZM2372," and "ZM2376." 【Features (excerpt)】 ■ Wide measurement frequency range and high-resolution settings ■ Wide measurement levels and ALC function ■ High-speed measurement ■ High precision ■ DC bias voltage ■ DC resistance (DCR) measurement *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "LI5600 series" is a digital lock-in amplifier that achieves high stability through digital processing after phase detection. It features excellent dynamic reserve of up to 100dB, an update rate of approximately 1.5M samples/s (LI5660/LI5655), and a fast, smooth output response with 16-bit amplitude resolution, covering the fundamental performance that enhances the reliability of small signal measurements. Additionally, the LI5660 supports a maximum measurement frequency of 11MHz (when using the HF input terminal), while the LI5655 covers up to 3MHz, extending the range into the high-frequency domain compared to previous models. 【Features】 ■ Simultaneous measurement of two frequencies ■ Fractional harmonic measurement ■ External 10MHz synchronization input ■ High-speed response and high stability ■ Wideband high-frequency input terminal supporting up to 11MHz (LI5660) *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

The protection relay tester "RX4744" has achieved testing of voltage and current with four elements each, which previously required multiple models, all in a single unit. Its compact and lightweight design makes it suitable for maintenance and inspection of core systems, as well as for testing protective functions related to mega solar, wind power, and cogeneration. To improve the efficiency of work in electrical equipment maintenance and the manufacturing of protection relays, it is equipped with various operating modes for individual and comprehensive testing, enhancing operability. By combining peripheral devices and software, an automatic relay testing system can be constructed. 【Features】 ■ Equipped with microcurrent output in the 400mA/5mA range ■ High accuracy in amplitude, phase, and frequency output ■ Built-in counter (milliseconds) allows for measurement of operating time ■ Rich operating modes for individual and comprehensive testing ■ Output switching function combined with a three-phase simulated circuit breaker to support comprehensive testing ■ Supports automation and efficiency of testing with protection relay testing software *For more details, please refer to the PDF document or feel free to contact us.

• others

Since the development of the first domestically produced function generator, we have continued to pursue what our customers truly seek and have evolved together with them. Here is an introduction to NF's function generator. It features high accuracy and stable output, a rich variety of output waveforms, diverse oscillation modes to accommodate various applications, and excellent operability. With the lineup of 'WAVE FACTORY' that allows you to freely create the required waveforms, we continue to propose function generators, believing that "this is the foundation of oscillators." 【Features】 ■ Low noise ■ Low distortion ■ 16-bit amplitude resolution ■ High amplitude setting accuracy ■ Floating *For more details, please refer to the PDF document or feel free to contact us.

• others

The "WF1967/WF1968" is not just a high-performance, multifunctional function generator; it is a unique and original device. It comprehensively covers all the fundamentals of a function generator as we envision it, and it reliably meets the demands for high-quality signals. It also includes various features such as sequencing functions and dual-channel linking. 【Features】 ■ Up to 200MHz, high accuracy and high resolution ■ Amplitude resolution of 16 bits ■ Amplitude setting up to 20Vp-p/open ■ Abundant output waveforms ■ Diverse oscillation modes *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The ZA57630 is an impedance analyzer that measures electronic components, semiconductor devices, materials, batteries, and more under actual conditions. With an easy-to-read display and touch panel, it offers a variety of functions that can be operated intuitively. Four measurement modes expand the range of measurement targets for both general electronic components and electronic materials such as insulating materials. 【Features】 ■ Accurate evaluation under actual operating conditions ■ Detailed settings are intuitive on a single screen ■ Corrections based on measurement error factors for accurate evaluation ■ Measurement speed as fast as 0.5 ms/point to reduce tact time ■ Enhanced component sorting functionality *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The FRA51615 is a frequency characteristic analyzer that incorporates the requests of our customers using FRA, pursuing ease of use in detail. It covers frequency characteristic measurements across a wide range of fields, from electronic circuits and electronic components/materials to mechatronics and electrochemistry. By equipping the necessary performance and functions for each field, it provides highly reproducible measurement data and promotes the efficiency of measurement work. 【Features】 ■ Design considering diverse measurement scenes ■ Reliable specifications and functions that achieve high-precision measurements ■ Packed with convenient features to enhance measurement work efficiency *For more details, please refer to the PDF materials or feel free to contact us.

• Other analytical equipment
• Other measuring instruments

The "EC750SA/EC1000SA" is a compact and lightweight AC power supply with an easy-to-read display, making it convenient for use in both laboratories and production lines. In addition to providing stable AC and DC power, it is equipped with essential features for power testing, such as measurement functions, current limiters, and sequencing. Furthermore, it has comprehensive protection features and interfaces, allowing for safe use as a system-integrated power supply. 【Features】 ■ Maximum AC output voltage: 310V ■ Maximum peak current: 4 times the maximum output current (RMS) ■ Measurement functions, sequencing, current limiter, protection features ■ Control software included as standard *For more details, please refer to the PDF document or feel free to contact us.

• DC Power Supply
• Electrical Equipment Testing

The DM2571 is a high-precision, multifunction digital multimeter with a DC voltage accuracy of 35ppm (0.0035%) and a 6 1/2 digit display. It incorporates 12 types of measurement items including voltage, current, resistance, frequency, and temperature, as well as 9 types of calculation functions. Equipped with a versatile display and rich interfaces, it is also suitable for integration into measurement systems. 【Features】 ■ 6 1/2 digit display: 1,199,999 counts ■ DCV: Basic accuracy 0.0035% ■ DCI/ACI: 100μA to 10A, 100pA resolution ■ 4.3-inch color TFT ■ 12 types of measurement items and 9 types of calculation functions ■ High-speed sampling rate of up to 10k rdg/s ■ USB, LAN, RS-232C, digital I/O, GPIB (optional) *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments