レンタルのニッケン List of Products and Services

The "Saku tto Barricade Mini" can be directly attached to machinery with magnets to establish restricted entry areas around cranes and aerial work platforms. It allows for easy magnetic attachment and can swing and extend 180 degrees to the left and right. It can also be moved while still attached. Please feel free to contact us when you need assistance. 【Features】 ■ Magnet-fixed and aluminum telescoping pole for easy setup in a short time ■ Simply run a rope or similar material around the aluminum telescoping pole to complete the setup ■ Can be moved and turned as is after installation ■ Number of units used can be adjusted according to site conditions ■ Reduces workload and significantly improves work efficiency *For more details, please download the PDF or feel free to contact us.

• Safety and consumables
• Crane and others

Product Description and Features Product Use: By attaching it to heavy machinery such as cranes, aerial work platforms, forklifts, and backhoes, it can be utilized to prevent contact with ceilings and people, as well as to prevent pinching. Product Features: It uses a powerful magnet, battery operation, and Bluetooth communication, making installation easy as no wiring is required. In the case of the monitor version, up to four sensors can communicate simultaneously with one unit. Accessories: The monitor is optional. If you are using it with the monitor version, please select from the accessories.

• Security Sensor Systems
• Safety devices for the visually impaired

Table lift dedicated hand pinching prevention device - Easy to carry (approximately 2.4 kg) - Can be installed in under 1 minute (easy installation for anyone)

• Safety and consumables

We would like to introduce our CW installation machine, the "Curtain Walker V." It is possible to minimize the floor area required for perimeter protection removal. This reduces the work of placing the curtain wall flat on the floor. Additionally, we also offer the "Curtain Walker E" and "1.5T Forklift with dedicated attachment" as base models. 【Features】 ■ Minimizes the floor area required for perimeter protection removal (from 3 floors to 1 floor) ■ Reduces the work of placing the curtain wall flat on the floor *For more details, please download the PDF or feel free to contact us.

• Curtain Wall

The "Katawaku Tonton" is an electric hammer attachment that can strike more firmly than a wooden mallet and is convenient to handle. Unlike conventional external vibrators and formwork vibrators, it is lightweight and easy to carry. Additionally, being battery-operated eliminates the need for a power cable, and since striking is not required, it can be used in tight spaces. 【Features】 ■ Can strike firmly in narrow areas ■ More effective than a wooden mallet and easy to handle ■ The electric hammer body is available for rent *For more details, please download the PDF or feel free to contact us.

• Foundation construction machinery

"Kunijiro" is a rebar cleaning machine that allows for cleaning work while standing by using a backpack style, reducing the need to bend over. Unlike brush work, it does not splash and reduces dirt on work clothes, and by using a dedicated attachment (sold separately) brush, efficient cleaning is possible. Additionally, unlike brushes and buckets, it does not use excessive water, which helps maintain the quality of the concrete. [Features] ■ 2-way design: backpack and floor-mounted ■ Reduces physical strain ■ Works with a small amount of water *For more details, please download the PDF or feel free to contact us.

• cleaning

We would like to introduce our construction and civil engineering staff bag, 'KENdoSEL'. This all-in-one bag allows for the organized management and carrying of tools, stationery, and tablet devices necessary during site inspections. Additionally, the tool storage carrier is detachable, and the back of the carrier features a blueprint holder and board function. 【Features】 ■ Vertical stand-alone ■ Waterproof ■ Detachable tool storage carrier ■ Water-resistant zipper ■ Storage rubber loops *For more details, please download the PDF or feel free to contact us.

• Other office supplies

We would like to introduce the material transport and lifting equipment, "Sky Table Diana," handled by Rent-a-Nikken Co., Ltd. It can lift loads up to a maximum height of 6.0m and can transport up to 250kg. Additionally, by using the optional magnetic hook, it is possible to hang measuring tools and other equipment for use. 【Features】 ■ No operation qualifications required as it is not a high-altitude work vehicle ■ Can be operated wirelessly or with a wired connection ■ Capable of transporting up to 250kg ■ Can lift loads up to 6.0m *For more details, please download the PDF or feel free to contact us.

• lift

We would like to introduce our digital thickness gauge, 'Slab±dunK'. It ensures accuracy with simple operation, reliably measuring slab thickness with a depth rod. Additionally, it supports data transfer via Bluetooth, allowing measurement results to be sent to a dedicated app. 【Features】 ■ Reliable measurement of slab thickness with a depth rod ■ Transfer measurement results to a dedicated app ■ Measurement and photography can be done by one person ■ Measurement units can be switched between cm and m *For more details, please download the PDF or feel free to contact us.

• Other measuring instruments

The "Curtain Walker E" is a CW installation machine base that can be used on one floor instead of three floors, which it previously occupied during installation. It is easy to transport and compact, allowing for minimal removal of surrounding protective coverings. It has a maximum lift height of 3520mm, a maximum load capacity of 850kg, and an impressive reach of 1390mm, making it highly efficient for work. Additionally, we also offer the CW installation machine "Curtain Walker V." 【Features】 ■ Maximum lift height: 3520mm ■ Maximum load capacity: 850kg ■ Battery-powered & self-propelled ■ Easy to transport and compact ■ Excellent work efficiency with a long reach (1390mm) *For more details, please download the PDF or feel free to contact us.

• Curtain Wall

We would like to introduce the electric mobile work platform "Sky Runner Apollo," handled by Rentall Nikken Co., Ltd. It can operate at a height of 1.95m while moving, and there is no need for fall protection equipment, making it easy to get on and off. Additionally, it comes with a picking tray on the work platform, allowing it to be used as a material storage area or workbench. 【Features】 ■ Can move while elevated ■ Easy to get on and off at a height of 1.95m without fall protection equipment ■ Comes with a picking tray on the work platform (manual type) ■ Manual height adjustment with 5 levels ■ Equipped with pothole protectors *For more details, please download the PDF or feel free to contact us.

• lift

The "Sakutto Barricade" is a barricade system that allows for the quick and easy establishment of restricted areas to prevent crane accidents. The previous task of arranging color cones and other items, which took time and effort, can now be completed swiftly with our magnet-fixed product. Simply stretch a rope or similar around the poles to complete the setup, and after installation, it can rotate as is. 【Features】 ■ Magnet-fixed ■ Aluminum telescopic poles ■ Can rotate as is after installation *For more details, please download the PDF or feel free to contact us.

• Protective fence

"SUMIDAS" is a marking robot that, when set at the end of the workday, can complete the marking work by the start of the next workday. It weighs less than 22 kg and uses a lithium-ion battery, allowing for 6 hours of continuous use. Additionally, it comes with safety features such as an emergency stop function in case of collision and an emergency stop button. 【Features】 ■ Weight is under 22 kg ■ Uses a lithium-ion battery, allowing for 6 hours of continuous use ■ Operating range is approximately 20m radius around a 3D measuring device (Wi-Fi communication limit) ■ Recording error is ±3mm ■ Work data is created on the cloud ■ Safety features include an emergency stop function in case of collision and an emergency stop button *For more details, please download the PDF or feel free to contact us.

• others

Introducing the high-altitude work vehicle UX 'Kento' handled by Rent-a-Nikken Co., Ltd. It is capable of traveling while the work platform is elevated (up to 6.1m), and the work platform can be extended by 460mm using a sliding mechanism. Additionally, it features functions to detect front and rear height differences, front and rear obstacles, and overhead obstacles when the work platform is raised. 【Features】 ■ Front and rear height difference detection function: Detects height differences (up and down) of approximately 25mm or more ■ Front and rear obstacle detection function: Detects about 15mm of deformation in the collision damper ■ Overhead obstacle detection function: Detects contact from limit switches (4 locations) ■ Upper laser pointer ■ UX function display board *For more details, please download the PDF or feel free to contact us.

• lift

We would like to introduce the material transport and lifting equipment "Sky Table Diana" handled by Rent-Nikken Co., Ltd. It can be operated with either a wireless remote control or a wired remote control, and since it is not a high-altitude work vehicle, no operating qualifications are required. Additionally, by using the optional magnetic hook, it is possible to hang measuring tools and other equipment for use. 【Features】 ■ No operating qualifications required as it is not a high-altitude work vehicle ■ Capable of transporting up to 200 kg ■ Capable of lifting up to 4.5 m ■ Operable with either wireless or wired controls *For more details, please download the PDF or feel free to contact us.

• lift

We would like to introduce the high-altitude work vehicle UX "Kento" handled by Rent-a-Nikken Co., Ltd. It is capable of traveling while the work platform is elevated (up to 4.5m), and it is equipped with an UX function display board that shows the status of the operator's operation, regulation, and detection functions on an LED screen. Additionally, it has a function to detect front and rear differences in height, as well as front and rear obstacles and overhead obstacles when the work platform is elevated. 【Features】 ■ Front and rear height difference detection function: Detects height differences (up and down) of approximately 25mm or more ■ Front and rear obstacle detection function: Detects a variation of about 15mm in the collision damper ■ Overhead obstacle detection function: Detects contact from limit switches (4 locations) ■ Upper laser pointer ■ UX function display board *For more details, please download the PDF or feel free to contact us.

• lift

"Dipper" is a construction site sediment management system that allows for data management of sediment volume through wireless communication with sensors. It eliminates the need for travel time to the station and visual inspection tasks, thereby improving work efficiency. Data can be checked on a computer, tablet, or smartphone, without the need for cumbersome app installation or setup. 【Features】 ■ By visualizing sediment volume with numerical data, it is possible to unify management criteria for collection decisions. ■ Alerts can be sent to multiple people when a certain sediment volume is reached. ■ The sensors are battery-operated, so no power supply is needed. ■ Sediment volume data can be saved in CSV format over time, which can be utilized for trend analysis and improvement activities. *For more details, please download the PDF or feel free to contact us.

• Construction and process management software

"TO Gather®" is an autonomous cleaning robot that automatically collects debris that has fallen on the floor of construction sites, contributing to the labor-saving of cleaning operations. It recognizes four installed reflective markers with a laser sensor, automatically generating the cleaning area and cleaning route. It efficiently travels within the area to gather debris. It can collect waste within a 100m² space in under 30 minutes. 【Main Equipment】 ■ Laser sensor ■ Control panel ■ 7-inch monitor ■ Warning light ■ Battery level indicator ■ Controller (built into the rear storage compartment) ■ Safety devices ・ Emergency stop switch ・ Collision prevention sensor *For more details, please download the PDF or feel free to contact us.

• Building Cleaning Equipment
• cleaning

"Himo-on" is an automatic follow cart equipped with an operator automatic following function, allowing for free route setting using retroreflective strings. It can easily transport heavy loads, contributing to labor-saving in transportation tasks. The running melody function notifies those around that it is in motion. 【Features】 ■ Route following function (sensed by retroreflective string) ■ Operator automatic following function ■ Simultaneous automatic following function for multiple units ■ Rechargeable AC100V ■ Maximum load capacity of 600kg ■ Maximum speed of 4.5km/h ■ Maximum operating time of 4h (charging time 9.5h) ■ Running melody function *For more details, please download the PDF or feel free to contact us.

• Trolley

"Position + Plus (R)" is a location information system that adds location data to people and objects both indoors and outdoors, allowing for easy centralized management of information necessary for construction management. By installing beacon devices that emit radio waves at various locations on the site and registering them on a server, the closest beacon serves as a reference point. The responsible person's iPad or log collection device communicates with the radio waves from the nearest beacon. This information is sent to the server, indicating that "the responsible person is in the vicinity of this beacon," and is shared accordingly. Unlike GPS, it can be used indoors, and this information can be utilized in various applications. 【Features】 ■ Can be used for regular corrective instructions and construction records ■ Reduces the hassle of searching for pre-completion photos ■ Cuts down the effort to find construction personnel and aerial work platforms ■ Allows management of aerial work platform reservation status on an iPad *For more details, please download the PDF or feel free to contact us.

• IoT
• Other Software

"Nikken's Gajyu Maru" is a wearable IoT service that enables managers, who oversee workers in the field, to implement "line care" by monitoring safety aspects such as accidents and changes in workers' health conditions. It allows for the understanding of an individual's "usual" state from daily data collected during work. It can also adjust for the gradual changes in "usual" states due to aging, and by comparing with past personal data, it can capture physical fatigue and changes in condition. Additionally, it can record potential "near misses" indicated by changes in pulse rate, making it possible to visualize areas that require attention. This allows experienced workers to pass on their knowledge of tension and urgency to less experienced workers by highlighting critical areas to watch out for. [Features] ■ Real-time monitoring of the health status of individuals working in a wide field ■ Calculation of each person's "usual" pulse rate, reflecting individual characteristics ■ Visualization of areas that require attention, such as "near miss maps" *For more details, please download the PDF or feel free to contact us.

• IoT

"Kamo-on" is a cart equipped with an operator automatic following function that realizes labor-saving in transportation work. It can carry up to 600 kg, making it easy to transport heavy items. Additionally, there are two types of driving modes: automatic following and manual control mode operated via a controller, allowing you to choose based on your needs. 【Features】 ■ Operator automatic following function ■ Simultaneous automatic following function for multiple units ■ Rechargeable with AC100V ■ Maximum load capacity of 600 kg ■ Maximum travel speed of 4.5 km/h *For more details, please download the PDF or feel free to contact us.

• Trolley
• Automatic transport robot