ティエスピー List of Products and Services

The "NT-TR-26S" is a device that cuts board-shaped foam cushioning materials to specified dimensions in both width and length. The cutting length can be freely adjusted, allowing for easy cutting to precise dimensions. Additionally, polishing can be done simultaneously. Our company also develops and manufactures products tailored to our customers' applications and needs, so please feel free to consult us regarding the introduction of manufacturing and processing equipment. 【Specifications】 ■ Power supply: AC200V ■ Machine dimensions: Width 3700mm, Depth 2000mm, Height 2200mm ■ Material feeding speed: Up to MAX 9m/min ■ Material size limitations: Width up to 1000mm, Length up to 2000mm (The cutting range may vary depending on the size of the machine) *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Foam Extrusion Device" performs the foam extrusion of cushioning materials. The motor capacity is 112.5 kW/AC400V, the heater capacity is 50.2 kW/AC200V, and the screw diameter is φ77 with a length-to-diameter ratio of 24. Specifications may vary depending on the type, so please feel free to consult us when placing an order. 【Options (partial)】 ■ Hopper for raw materials (with stirring and level sensor) ■ Transition for raw materials (with pole and accessories) ■ Hopper for PP ■ Transition for PP (with pole and accessories) *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Compression Roller Device" shapes cushioning materials and the like, after extrusion foaming, into plate or sheet form through the compression of rollers from above, below, left, and right. The speed, width, and thickness of material feeding can be adjusted. Our company also develops and manufactures products tailored to our customers' applications and needs, so please feel free to consult us regarding the introduction of manufacturing and processing equipment. 【Specifications】 ■ Power supply: AC200V (requires compressed air) ■ Material feeding speed: up to 60m/min ■ Material dimension limits: width up to 600mm, thickness up to 60mm *For more details, please refer to the PDF document or feel free to contact us.

• others

The "YC-1 (GC-1)" is a device for rough cutting board-shaped foam cushioning materials to a specified size. The length of the board material to be cut can be freely adjusted via a touch panel. Additionally, the speed of the conveyor that feeds the material can also be changed. Our company develops and manufactures products tailored to our customers' applications and needs, so please feel free to consult us regarding the introduction of manufacturing and processing equipment. 【Specifications】 ■ Power supply: AC200V (requires compressed air) ■ Machine dimensions: Width 1650mm, Length 6000mm, Height 1400mm ■ Material feeding speed: Up to 60m/min ■ Material size limitations: Width up to 600mm, Thickness up to 60mm *For more details, please refer to the PDF document or feel free to contact us.

• others

The "KFS-8 type" is a machine that automatically packs small, lightweight products such as foam cushioning materials into small bags made of PE or similar materials. The upper mechanism is designed and manufactured according to the contents to be packed in the small bags. The standard width of the small bags is 300mm, and the length of the bags can be freely set and changed via a touch panel. Additionally, the cycle time is approximately 3 seconds per bag, making it high-speed. 【Specifications (excerpt)】 ■ Power supply: AC200V (requires compressed air) ■ Machine dimensions: Width 1450mm, Depth 900mm, Height 1450mm (Dimensions do not include the upper material supply hopper and weighing device) ■ Packaging speed: 500 to 1200 bags/hour (There are limitations depending on the type and amount of contents) ■ Heater - For sealing the back side of the small bags: 700W x 1 unit - For sealing the top and bottom of the small bags: 180W x 2 units *For more details, please refer to the PDF materials or feel free to contact us.

• others

Introducing "Eco Mother," which uses a non-polluting foam made from natural materials, along with the cushioning material "Bottle Pack" and the insulation material "Cool Box." The main raw material is corn starch, and this foam has a low heat generation during combustion, does not produce harmful gases or dioxins, and can be disposed of as general combustible waste. The cushioning material can be made in various shapes, and the insulation material can be customized to your desired size in small lots. 【Features】 ■ Uses a non-polluting foam made from natural materials ■ Low heat generation during combustion, does not produce harmful gases or dioxins ■ Can be disposed of as general combustible waste ■ Sufficient strength as a box when combined with paper materials like cardboard ■ Available in small lots *For more details, please refer to the PDF document or feel free to contact us.

• others

"Eco Mother (R)" is a pollution-free cushioning material made from natural materials with low environmental impact, specifically using corn starch as the main ingredient. It features four selectable functions: filling, laying, wrapping, and packaging, making it effective across a wide range of fields and applications from industrial to commercial packaging. Additionally, if biodegradable resin is used as a binder, it can be decomposed in the soil. 【Features】 ■ Low heat generation calories during combustion (about half that of polystyrene) ■ Does not produce harmful gases or dioxins ■ Can be disposed of as general waste ■ Does not cause static electricity during packaging ■ Has infinite applications as a substitute for chemical products like polystyrene *For more details, please download the PDF or feel free to contact us.

• others

"Eco Mother®" is a pollution-free cushioning material made from natural ingredients with low environmental impact, specifically using corn starch as the main raw material. It features four selectable functions: filling, laying, wrapping, and packaging, making it effective across a wide range of fields and applications from industrial to commercial packaging. Additionally, if biodegradable resin is used as a binder, it can be decomposed in the soil. 【Features】 ■ Low calorific value during combustion (about half that of polystyrene) ■ Does not emit harmful gases or dioxins ■ Can be disposed of as general waste ■ Does not cause static electricity during packaging ■ Has unlimited applications as a substitute for chemical products like polystyrene *For more details, please download the PDF or feel free to contact us.

• others