Schunk Carbon Technology Japan KK List of Products and Services

Electrostatic discharge from the generator causes stray currents to occur in the shaft. If this current is not diverted, it can cause significant damage to the bearings; however, our high-quality two-layer carbon brushes handle it safely and reliably. Rollers and bearings are protected, avoiding costly repairs and system downtime. The advantages include: - Individually tailored materials for two-layer carbon brushes - High reliability and efficiency - Excellent protection for bearings and gearboxes

• others

Our wind turbine shaft grounding system features the latest grounding brushes and a carbon fiber-based system. It is also a suitable solution for high-frequency currents. It reliably diverts capacitive currents away from the shaft, ensuring the prevention of damage to bearings and gearboxes. This minimizes downtime and repair costs for wind farms.

• others

The Schunk brush holder for wind power plants always accurately positions the carbon brushes on the slip rings, even under the most severe conditions. The wear indicator also improves the efficiency of maintenance and replacement.

• others

Our lightning protection system is certified by safety certification bodies. Our lightning protection components meet the latest standards and have high reliability against lightning strikes. This reduces downtime for wind power plants and minimizes repair costs.

• others

Our carbon brake pads differ from conventional organic brake materials due to their excellent acoustic properties. Using our brake pads eliminates squeaking noises. With extremely low wear, the nacelle interior and critical components are not contaminated by brake dust. Additionally, the excellent wear resistance means that the brake pads are almost maintenance-free. This significantly reduces maintenance costs and intervals, especially for offshore maintenance.

• others

Exhibit 1 [Features of Graphite Separator] Manufactured by Schunk Kohlenstofftechnik ● Excellent corrosion resistance ● High conductivity ● Extremely good mechanical strength ● Very high design freedom compared to other materials and manufacturing methods ● Gas sealability ● In-house mold design and manufacturing Exhibit 2 [Features of SiC Major Components for Solar Thermal Power Plants] Manufactured by Schunk Ingenieurkeramik ● High thermal conductivity ● High thermal conductivity ● Low thermal expansion rate ● Heat resistance ● Media resistance ● Non-abrasive ● High hardness ● Elasticity, etc. * There is no other material that combines as many valuable functions for industrial applications as Schunk's technical ceramics. Exhibit 3 [Features of Ultrasonic Welding Device LS-C] Manufactured by Schunk Sonosystems ● Cross-sectional area range: 6mm² to 200mm² Suitable for a wide range of terminal applications such as tubular cable lugs and busbars ● Welding of copper and aluminum wires and terminals ● Equipped with coating crimping and cutting mechanism ● Can be integrated with automatic production systems ● Maximized welding work area

• others

In addition to our headquarters factory in Germany, we have established technical bases in the United States, Morocco, China, and other locations, providing comprehensive services worldwide. 【Our Technology】 The ultrasonic welding technology that utilizes ultrasound for metal bonding is a forward-looking method. In addition to bonding copper and aluminum materials, it is also possible to bond metal and glass. By stacking the workpieces to be joined and applying mechanical vibrations at high frequency with low pressure, a permanent, strong, and metallurgically pure bond with excellent physical properties is achieved in an instant. 【Welding Technology】 ● Spot Welding: The most versatile application of ultrasonic welding, typically ranging from a few square millimeters to 100 square millimeters in size. ● Bending Sonotrode: Ideal for hard-to-reach welding spots. ● Rotary Seam Welding: Achieves continuous linear metal seam welding, applicable in solar thermal power, photovoltaic power generation, and composite material pipe manufacturing. 【Advantages】 ● No thermal load on components. ● Superior quality and cost performance compared to other welding and bonding methods. ● No additional materials such as filler are required. ● Digital monitoring of the welding process is possible. ● We provide a complete system solution.

• others

We would like to introduce our technology related to "ultrasonic metal welding." Ultrasonic welding is a forward-thinking method that utilizes ultrasonic waves for metal bonding. In addition to bonding copper and aluminum materials, it is also possible to bond metal and glass. Our products are a total system solution from a single source. In addition to standalone standard equipment, we design our products around a modular system concept, achieving integration into fully automated production systems for ultrasonic welding equipment. Please feel free to contact us if you have any inquiries. 【Advantages】 ■ No thermal load on components ■ Higher quality with excellent cost performance ■ No need for additional materials such as filler ■ Digital monitoring of the welding process is possible ■ We provide a complete system solution *For more details, please refer to the PDF materials or feel free to contact us.

• others

This catalog features products handled by Schunk Carbon Technology Japan Co., Ltd., including ultrasonic welding equipment. In the manufacturing of wire harnesses for the automotive, construction machinery, and home appliance industries, ultrasonic welding is one of the particularly important bonding technologies. We offer a rich lineup, including the ultrasonic welding device "Minic-III" and the "L-Splice," which excels in high heat resistance and high load. We invite you to take a look. 【Contents】 ■About us ■Wire harnesses ■Wire-to-wire ■Wire-to-terminal ■Technical specifications ■Technical data *For more details, please refer to the PDF materials or feel free to contact us.

• others

Schunk's grounding system effectively protects bearings from damage by directly discharging the capacitive discharge current generated from the rotor of the drive motor's shaft. It also minimizes noise emitted from the motor shaft.

• others

Our CFRE sleeves can achieve a high level of manufacturing precision to minimize thickness and reduce eddy current losses to a minimum. They have been adopted for mass production by many leading manufacturers worldwide. 【Product Features】 ■ No thermal expansion during temperature rise ■ Reduction or elimination of eddy current generation ■ Capable of supporting high-speed motors ■ High density and lightweight ■ Product variations according to application

• others

University research labs, development labs, medical institutions, and researchers, take note! Graphite tube technology (GF-AAS) for measuring trace elements provides the highest evidence accuracy among common analytical processes. Schunk Carbon Technology has years of experience in the development and manufacturing of graphite components, tubes, cuvettes for atomic absorption spectroscopy (AAS), and CVD thermal decomposition carbon coating technology, offering a wide range of products. Our development and production processes, from formulation, mixing, and shaping to graphitization and high-temperature cleaning, establish quality standards for applications in analytical technology. Key features: ■ Premium graphite components that achieve the highest measurement accuracy ■ Excellent heat resistance ■ High purity ■ Long lifespan

• others

In the field of measurement technology, our company has developed and manufactured specialized materials for demanding measurement instruments for many years. Our measurement cells and components made from carbon-based materials are particularly suitable for use in harsh environments, such as those found in dialysis equipment. They are especially well-regarded for their excellent chemical resistance and effectiveness in cleaning highly corrosive media. Additionally, they possess high biocompatibility, consistently high conductivity, and a long operational lifespan. Key Features: ■ Measurement cells made from specially developed materials ■ High chemical resistance ■ Excellent biocompatibility ■ Consistently high conductivity ■ Long lifespan If you would like to know more about blood dialysis devices and analytical carbon, please feel free to contact us.

• others

Our excellent synthetic resin-impregnated electrical graphite has the advantages of being non-oxidizing, physiologically harmless, free from bacterial growth, and having high chemical resistance. It can be used for accurate measurements over a long period in many fields, including the food and pharmaceutical industries, agriculture, and sewage treatment plants. We offer a selection of superior graphite materials, as well as options for shapes and contact designs.

• others

This is a separator specifically designed for PEMFC and DMFC types. We invite you to learn about our attractive product range and the latest technologies (such as hydrophilic surface treatment for high-output fuel cell stacks and core thickness < 250 micrometers) and utilize them for your company. 【Exhibited Product: Features of Graphite Separator】 ■ Excellent corrosion resistance ■ High conductivity ■ Extremely good mechanical strength ■ Very high design flexibility compared to other materials and methods ■ Gas sealing properties ■ In-house mold design and manufacturing *For more details, please download the PDF or feel free to contact us.

• others

Our CFRP sleeves secure the rotating assemblies of surface-mounted permanent magnet synchronous motors (SPM) and synchronous motors (ESM), minimizing eddy current losses. In addition to using reinforced carbon fibers with high tensile strength characteristics, our high level of manufacturing precision allows us to minimize wall thickness. We can also produce sleeves with a wall thickness of over 10mm, similar to CFRP flywheels. 【Customer Benefits】 ■ Reduction or elimination of eddy current generation ■ Capability to support high-speed motors ■ Weight reduction ■ Improvement in the aesthetic design of motor designs Schunk provides a consistent service from prototyping to evaluation. ■ Assembly planning ■ Conducting sleeve factor (FE) analysis ■ Prototype production ■ Test assembly and evaluation ■ Chemical resistance evaluation For more details, please refer to our brochure and video. Feel free to contact us.

• others

Silicon carbide "IntrinSiC®" is an excellent innovation aimed at the production of large and complex integrated structural components made from silicon infiltrated/reaction bonded silicon carbide (RBSiC). By combining the excellent material properties of RBSiC with the unique advantages of the 3D printing process, it offers new structural design possibilities in the markets of ring graphing, measurement, and heat treatment technology. 【Features】 ■ Large and complex integrated structures can be formed in a single manufacturing process ■ Advanced surface finishing achieved through grinding, polishing, and lapping ■ Reverse engineering of existing products realized through contact and non-contact measurement methods ■ Data evaluation and digitization are possible *For more details, please refer to the product catalog available for download as a PDF. *Feel free to contact us with any inquiries.

• others

"Transit Systems" is a charging solution for electric vehicles that enables automatic charging. Unlike plug-in systems, there is no need for workers to plug in each vehicle individually, nor is there a requirement to secure additional space between vehicles for plugs and cables. By installing the charging equipment on the roof, efficient charging is possible even in narrow garages. Additionally, during the operation of electric buses, ultra-fast charging can be performed while the bus is stopped. 【Features】 ■ High power transmission of up to 1MW ■ Multi-pole design and contact sequence for reliable charging ■ Compatible with kneeling, ensuring no obstruction for passengers getting on and off ■ For electric buses, charging can be completed in just a few seconds whether in service or waiting in the garage ■ Significant reduction in battery size achieved *For more details, please refer to the materials. Feel free to contact us with any inquiries. ★ We plan to exhibit at the "2022 Yokohama Automotive Technology Exhibition." Please see the basic information below for details.

• others

Due to bearing and transmission damage caused by shaft voltage, there is a risk of high-cost failures occurring in vehicles. Let's extend the lifespan of your trains with Schunk's patented "Carbon Fiber Grounding (CFG)" device. This carbon fiber-based motor shaft grounding device effectively dissipates stray currents within the motor and gear systems, safely protecting the bearings from damage. 【Features】 ■ Effectively dissipates stray currents ■ Protects bearings from high-cost damage ■ Withstands standard environmental conditions in the railway sector, such as shocks and vibrations ■ Can often be easily retrofitted *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Electric Vehicle Charging Solution" is a transit system that reliably charges batteries in just a few seconds, whether in operation on routes or waiting in the garage. By using the "Ultra-Fast Charging Rooftop Pantograph," it can be adapted to meet your requirements regarding power transmission and application range. Schunk is developing technology to contribute to solving the challenges of insufficient charging infrastructure. This charging technology is available for future charging stations, including those for public use. 【Product Lineup】 ■ Ultra-Fast Charging Rooftop Pantograph SLS102 ■ Ultra-Fast Charging Rooftop Pantograph SLS103 ■ Ultra-Fast Charging Reverse Pantograph SLS201 ■ Depot Charger SLS301 *For more details, please refer to the PDF materials or feel free to contact us.

• others

Our company, a German manufacturer of carbon materials with a 100-year history, offers "carbon brushes" made from carbon-graphite materials that possess excellent electrical conductivity, thermal conductivity, and high heat resistance. They are characterized by high reliability, operating stably in a wide range of environments, and have received high praise from customers in various industries. They can meet diverse requirements such as power surges, idling periods, light load operation, extreme ambient temperatures, chemicals, oil mist, and high dust loads. 【Features】 ■ High quality approved by major manufacturers for OEM ■ Increased cable diameter optimized for brushes ■ Special design for dust prevention ■ A wide range of grades available to accommodate various applications *For more details, please refer to the materials. Feel free to contact us with any inquiries. ★ If you can provide the part number of the current product, we can suggest alternative products. Please feel free to reach out.

• others

The characteristics of carbon and graphite used in carbon brushes can generally be judged from the items of "electrical resistivity," "hardness," "flexural strength," and "bulk density." In the case of metal graphite, the metal content is also indicated in addition to the above items. All data are average values. The testing methods and equipment generally conform to IEC60413. These values can vary significantly due to various environmental factors and operating conditions. Therefore, based on experience, we have established a general range for the values of the two items and compiled them into a table by classification. Please refer to the PDF document below for confirmation. *For more details, please refer to the PDF document or feel free to contact us.*

• others

This document introduces charging pantographs for electric buses. It features the "ultra-fast charging reverse pantograph," which can automatically and reliably charge the battery in just a few seconds, whether the bus is in operation on the route or waiting in the depot. This can be effectively implemented in charging facilities with limited installation space. Additionally, you can view the "Depot Charger SLS301," a transit system that allows for overnight charging in the depot through automatic connection, by downloading the PDF below. [Contents] ■ Introduction ■ Ultra-fast charging rooftop pantograph ■ Ultra-fast charging reverse pantograph ■ !! New Product !! Depot Charger *For more details, please refer to the PDF document or feel free to contact us.

• others

Shunk Carbon Technology is a company that has cultivated experience and know-how for decades in the field of charging and power supply, where high reliability is required. In the road sector, our innovative Shunk smart charging system is opening up new possibilities in terms of economy, performance, and flexibility, enabling a system that safely and reliably charges battery-powered vehicles with rapid charging in just a few seconds, whether in the garage or while in operation. In the railway sector, our pantographs, grounding devices, third rail collection devices, and carbon fiber grounding systems (CFG systems) provide innovative operational methods that enhance safety, economy, and reliability in the railway industry. 【Products (partial list)】 ■ Charging pantographs for electric vehicles (smart charging system) ■ Pantographs and contact strips for railways ■ Carbon fiber grounding systems (CFG systems) ■ Grounding devices and grounding brushes ■ Third rail collection devices *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "EmissionEvent" is a testing device that enables the analysis of safe and reliable VOC conditions by reproducing environmental conditions of temperature and humidity. It features a device design based on CerTech standards with over 100 units of rich experience. The device allows for the analysis of volatile VOC components using a spray cooling system, with a temperature range of +20 to +130°C and a humidity range of 5 to 95% rh. 【Features】 ■ Analysis of volatile VOC components using a spray cooling system ■ Temperature range: +20 to +130°C ■ Humidity range: 5 to 95% rh ■ Device design based on CerTech standards with over 100 units of rich experience *For more details, please refer to the PDF document or feel free to contact us.

• others

The "SWT Series" is an IP waterproof testing device capable of testing protection levels IPX3 and IPX4. With the integration of a built-in timer, the automated testing process time can be set from 3 seconds to 30 hours. As an option, a water circuit system that minimizes water consumption can be installed. Additionally, we also handle the "VSPT Series," which complies with the ISO 20653 and IEC/EN 60529 standards. Please feel free to contact us if you have any inquiries. 【Features】 ■ Tests protection levels IPX3 and IPX4 ■ Complies with DIN VDE 0470 T1 or EN 60529 ■ Automated testing process time can be set from 3 seconds to 30 hours ■ Option to install a water circuit system that minimizes water consumption *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "AirEvent" is a gas corrosion testing device that can mix up to four types of gases. It can test the resistance of products to harmful substances and collect information regarding the service life of the products. It supports H2S, SO2, Cl2, transport gases such as N2, NO2, synthetic air, and other gases. Please feel free to contact us when you need assistance. 【Features】 ■ Testing of gases such as H2S, SO2, Cl2, N2, NO2 synthetic gas ■ Ability to mix up to four types of gases ■ Pressure monitoring protection ■ Gas sampling connection ■ Air conversion device testing *For more details, please refer to the PDF document or feel free to contact us.

• others

The "SaltEvent" is a saltwater spray environmental testing device that enables optimal spray distribution using a precise two-material nozzle. It features excellent temperature uniformity due to its double-shell design, which includes internal insulation and follow-up control of a heated compressed air humidifier. It complies with construction standards for test chambers and test hoods, preventing dripping from spray products onto samples. [Features] ■ Optimal spray distribution using a precise two-material nozzle ■ Excellent temperature uniformity due to double-shell design ■ Adjustable flow meter and radiation device ■ Compliance with construction standards for test chambers and test hoods ■ Prevention of dripping from spray products onto samples *For more details, please refer to the PDF document or feel free to contact us.

• others

The "ST Series" is an IP dust-proof environmental testing device with a volume of 900L. It is equipped with a high-performance special compressed air jet that achieves a high uniform concentration when adding dust. In accordance with SAE J 575 standards, 3 to 5 kilograms of unburned Portland cement is blown into the test chamber, filling the chamber's funnel with this dust. We also handle dust testing devices for MIL standards, so please feel free to contact us. 【Features】 ■ Volume: 900L ■ Aluminum test chamber ■ Shelf load capacity: 50/120kg *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "HeatEvent" is a constant temperature (constant humidity) testing device that excels in energy efficiency, compactness, and cost performance. It features safety functions compliant with EN 1539:2015 Dryer Type A, allowing for energy-efficient heating up to 400°C by optimizing air flow. Additionally, the protection class is IP54, and we offer seven size variations ranging from 0.216m² to 8m². 【Features】 ■ Seven size variations from 0.216m² to 8m² ■ Rated temperatures: 220°C / 300°C / 350°C / 400°C ■ Protection class IP54 ■ WEBSeason interface compatible with internet environments *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "LabEvent EMC" is a temperature-controlled testing device for EMC testing that is compatible with the WEBSeason internet environment. The interior of the chamber is shielded, allowing for testing the effects of temperature. Additionally, it uses the low GWP refrigerant R-449A, and the interface is designed to be compact and space-saving. 【Features】 ■ EMC protection >50dB (0.5–3.0GHz) ■ Compatible with the WEBSeason internet environment ■ Low GWP refrigerant R-449A ■ Compact design of the interface, space-saving *For more details, please refer to the PDF document or feel free to contact us.

• others

We handle the walk-in chamber "ClimeEvent." The temperature range is from -40°C or -70°C to +150°C. The humidity range reproduces a highly reproducible and precise constant temperature (constant humidity) environment from 10% to 95% rh. Additionally, since the interior of the chamber is a shielded environment, it is possible to test the effects of temperature in EMC testing. 【Features】 ■ Low GWP refrigerants R-449A and R-469A ■ High-precision air conditioning, cooling systems, and control units ■ Interface compatible with WEBSeason internet environment *For more details, please refer to the PDF materials or feel free to contact us.

• others

Along with that, safety and reliability are essential. Testing cannot be separated from ensuring that it can be used safely without breaking in any environment.

• others

Solutions for the automotive industry, which is the largest industry in Japan and Germany, will further expand their products in line with trends in E-mobility.

• others

Our company handles constant temperature (constant humidity) test equipment for battery testing. Batteries may pose risks during testing, such as internal short circuits and thermal runaway, and as electric vehicles become more prevalent, lithium-ion batteries are increasingly being developed for higher capacities. This product allows for safe testing by adding various safety protection options in accordance with the hazard levels specified by EUCAR. 【Safety Protection Options (Partial)】 ■ Signal Tower ■ Electric Door Lock ■ N2 or CO2 Fire Extinguisher ■ O2 Measuring Device ■ Large Pressure Relief Disk *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "LabEvent" is a constant temperature (constant humidity) testing device that uses the low GWP refrigerant R-449A. We offer a wide range of options including rack stacking, monitor arms, packages compliant with EUCAR hazard levels 3 and 4, and safety features for LiB testing. It is energy-efficient, compact, and offers excellent cost performance, compatible with the WEBSeason internet environment. 【Features】 ■ Compact design, space-saving ■ Numerous option settings ■ Low GWP refrigerant R-449A ■ Interface compatible with the WEBSeason internet environment *For more details, please refer to the PDF materials or feel free to contact us.

• others

We handle the embedded vibration testing device, the constant temperature and humidity testing instrument "ShakeEvent." In actual usage environments, especially in the automotive and aerospace industries, many components are subjected to extreme temperature changes due to vibrations and environmental conditions. This product simulates an environment closer to real conditions by adding various environmental stresses such as vibrations, low-temperature environments, high-temperature environments, and high-humidity environments. 【Features】 ■ Compatible with various vibration testing devices ■ Low GWP refrigerant R-449A ■ Interface compatible with WEBSeason internet environment *For more details, please refer to the PDF document or feel free to contact us.

• others

Our company handles the integrated solar radiation device, the constant temperature and humidity testing chamber 'SunEvent'. Products are exposed daily to direct sunlight from the sun, high temperatures, low temperatures, and humidity, regardless of their intensity, which can cause the paint to peel and lead to the end of their lifespan in a different sense than their intended service life. This product complies with the DIN 75220 and IEC 60904-9:2007 standards and tests the service life of products under sunlight, temperature, and humidity. 【Features】 ■ Excellent illuminance distribution solar radiation device BBA Sun Simulator compliant with IEC 60904-9:2007 ■ Compliant with DIN 75220 ■ Low GWP refrigerant R-449A ■ Interface compatible with WEBSeason internet environment *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "TempEvent" is a constant temperature testing device that allows for program settings, control, and monitoring anytime and anywhere, thanks to the adoption of "WEBSeason." The adoption of promising new refrigerants and optimized air conditioning design in the industrial sector achieves the highest level of eco-friendly operation. It is compatible with tablet and smartphone environments, enabling the establishment of a more efficient and convenient testing environment. 【Features】 ■ Low GWP refrigerants R-449A and R-469A ■ Optimized airflow, temperature change capability, and uniform temperature distribution ■ Interface compatible with WEBSeason internet environment *For more details, please refer to the PDF materials or feel free to contact us.

• others

Weiss Technik is a member of the Schunk Group and is the second largest division among the group's four divisions. We provide solutions for customers to develop higher performance, robust, and safer products and to realize their technical visions. As "engineers for engineers," we are passionate about developing unique high-tech solutions. As a member of the Schunk Group, we have a solid financial foundation, a long-term commitment, and access to the global market. 【Business Activities】 ■ Solution Development ■ Environmental Testing Equipment *For more details, please refer to the PDF document or feel free to contact us.

• others

"ClimeEvent" is a testing device that achieves industry-leading rapid temperature changes of 25°C/min over a wide range of temperature and humidity. It uses R449A as the refrigerant, which has a global warming potential (GWP) that is about one-third that of the conventional R-404A. Depending on the testing purpose and sample size, you can choose from a rich lineup of devices with capacities ranging from 270 liters to 1300 liters. 【Features】 ■ Rapid temperature changes compliant with IEC 60068-3-5 standards ■ Operates over a wide temperature range from -72°C to +180°C ■ Supports allowable heat loads up to 8kW over a broad temperature range of -20°C to +100°C ■ High maintainability ensured with easy wick replacement *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "ShockEvent" is a sample-moving thermal shock testing device from the German company Weiss Technik, which has extensive experience with major European automotive manufacturers and the electronics industry. It complies with international thermal shock testing standards and provides rapid temperature changes to samples under a wide range of testing conditions from -80°C to +220°C, offering reliable tests with high reproducibility and accuracy. The interface, including the operation panel, is fully localized in Japanese, ensuring high usability with easy operation and maintenance. 【Features】 ■ Processes accurate tests even for large quantities of samples ■ A diverse lineup of models according to sample size and capacity ■ Equipped with various user-friendly functions ■ Uses the new refrigerant "R449A," which has a global warming potential (GWP) about one-third that of the conventional R-404A *For more details, please refer to the PDF document or feel free to contact us.

• others

We offer a wide range of environmental testing systems and equipment. We provide solutions in various sizes suitable for tests such as temperature, weather, vibration, corrosion, emissions, altitude, pressure, and combined stress. From product series to customized solutions and process-integrated systems, choose us for excellent reproducibility and precise test results. Additionally, our systems establish new standards in functionality, performance, and design, featuring advanced design, careful assembly, and meticulous maintenance. 【Products Offered (Excerpt)】 ■ Constant temperature testing equipment for battery testing ■ Constant temperature (constant humidity) testing equipment "LabEvent" ■ Constant temperature testing equipment for EMC testing "LabEvent EMC" ■ Constant temperature (constant humidity) walk-in chamber "ClimeEvent" ■ Thermal oven "HeatEvent" *For more details, please refer to the PDF document or feel free to contact us.

• others

During climate testing, there is a possibility of battery overcharging or failure. As the storage size increases, the likelihood of failure and associated risks during lithium battery testing also becomes greater. To safely conduct lithium battery tests in the laboratory using temperature testing equipment and climate testing chambers, we provide safety devices optimized for the EUCAR hazard level. Additionally, it is possible to individually adjust the safety device equipment to meet your specifications. For more detailed information, please contact us. 【Available Safety Equipment (Excerpt)】 ■ Photoacoustic Alarm ■ Electric Door Lock ■ Pressure Relief Flap ■ Mechanical Door Lock ■ Particle Blocker *For more details, please refer to the PDF document or feel free to contact us.

• others

We have compiled the product lineup of Weiss Technik into this single volume. (For details, please refer to the individual product catalogs or specifications.) Weiss Technik was established in Germany in 1956 and is now a leading global company in environmental testing equipment, with locations in 15 countries worldwide. We offer a wide range of products, including constant temperature (constant humidity) testing equipment, thermal shock testing equipment, integrated constant temperature and humidity testing equipment with solar radiation devices, constant temperature (constant humidity) testing equipment for battery testing, IP corrosion testing equipment, gas corrosion testing equipment, and more. [Contents] ■ Company Overview ■ Environmental Testing Equipment ■ IP Corrosion Testing Equipment ■ Software *For more details, please refer to the PDF materials or feel free to contact us.

• others