ベアリッジ List of Products and Services

The "BRIDGECOM X10 Compact" is a high-performance, compact transceiver that inherits the genes of the X10. It maintains the innovation that the X10 brought to the field while achieving an astonishing downsizing to approximately 98g. It strongly supports hands-free communication when mounted on helmets and collaboration for sports referees. 【Features】 ■ A wide range of accessories available ■ The overwhelming lightness of under 100g, which reduces the burden on the body ■ PS mode: Allows communication up to 1,000m without a sub-master unit ■ PH mode: Supports simultaneous communication with up to 10 people and communication up to 1,500m via a sub-master unit, just like before ■ Compact and lightweight yet boasts a robust body *For more details, please refer to the PDF document or feel free to contact us.

Here is an example of the use of high-altitude work vehicles at tunnel sites. Since the noise inside the tunnel is severe, we recommend using a boom microphone to suppress noise and pick up only the voice by bringing the microphone close to the mouth for communication. Please feel free to contact us when needed. 【Case Overview】 ■ Product: Bridgecom X10 Compact ■ Communication Distance (in good visibility conditions): 100-500m on flat ground, 100-200m in elevation difference *For more details, please download the PDF or feel free to contact us.

Here is an example of the use of high-altitude work vehicles at tunnel sites. When communicating with groups that cannot be reached by radio, the main units are connected using a relay connection cable to link the two groups. Additionally, when moving to a different group, a change of group is necessary. Care must be taken to ensure that IDs do not overlap during this process. 【Case Overview】 ■ Products - Bridgecom X10 Compact - Bridgecom X10 ■ Communication Distance (under good visibility conditions): 100-500m on flat ground, 100-200m in elevation difference ■ Relay connection cable can range from 1m to several km *For more details, please download the PDF or feel free to contact us.

Here is an example of a construction site using a ground crane. When rooftop workers are not in the blind spot of the crane and there are few radio interference from concrete or steel plates, if it is at a low-rise stage, the rooftop and ground levels can communicate directly, so there is no need to set up a master station. In this case, it is appropriate for the rooftop workers to carry the master station. 【Case Overview】 ■ Product: Bridgecom Xten ■ Communication Distance (in clear visibility conditions): 100-500m on flat ground, 100-200m in elevation difference *For more details, please download the PDF or feel free to contact us.

We would like to introduce a case study of ground cranes at construction sites. Due to concrete and steel plates obstructing radio waves between the rooftop and ground levels, a master unit was installed in a position where rooftop workers can oversee the crane. This enables stable communication among the rooftop workers, crane operators, and ground workers. 【Case Overview】 ■ Product: Bridgecom X10 ■ Communication Distance (in clear visibility conditions): 100-500m on flat ground, 100-200m in elevation difference *For more details, please download the PDF or feel free to contact us.

This is an example of a gantry crane at a port quay wall. If the operation room has a view of both the quay side and the ship side, it is preferable to install the master in the operation room. The master installed in the operation room should be placed by the window or outside the operation room to ensure better signal reception downwards. 【Example Overview】 ■ Product: Bridgecom X10, Bridgecom X10 Compact ■ Communication Mode "X10: S9/X10CP: PS" *For more details, please download the PDF or feel free to contact us.

This is a case study on the use of gantry cranes at port quay walls. When the ship's hull is deep, the operator must move to the shore side, which prevents the radio waves from reaching the ship side. Therefore, it is necessary to install a sub-master to relay the master’s radio waves. The master installed in the operation room should always be placed by the window or outside the operation room to facilitate the transmission of radio waves downward. 【Case Overview】 ■ Communication Mode "X10: RM/X10CP: PH" *For more details, please download the PDF or feel free to contact us.

This is an example of a rough-terrain crawler crane at a harbor quay. The master unit must be installed in a location where it can oversee the slave units. We provide a clear explanation with diagrams in the catalog. If you have any questions, please feel free to contact us. 【Case Overview】 ■ Communication Mode "X10: S9/X10CP: PS" *For more details, please download the PDF or feel free to contact us.

Here is an example of using a jib crane at a harbor quay. By installing the sub-master on the opposite side of the operation room, workers automatically pick up the signal from either the master or the sub-master each time they turn. It is essential that the master installed in the operation room is positioned by the window or outside the operation room to ensure the signal can reach down easily. [Case Overview] ■ Communication Mode "X10: RM/X10CP: PH" *For more details, please download the PDF or feel free to contact us.

This is a case of communication between the surface and inside the sewer pipe at a sewer construction site. Since radio waves cannot directly reach between the surface and inside the sewer pipe, a master and sub-master are installed above and below the opening to serve as a relay. This allows for communication by relaying radio waves. Inside the sewer pipe, if there are no obstacles or blind spots, clear communication is possible up to several hundred meters away. 【Case Overview】 ■ Product: Bridgecom X10, Bridgecom X10 Compact ■ Communication Distance (in clear visibility conditions): Flat ground 100-500m, elevation difference 100-200m *For more details, please download the PDF or feel free to contact us.

We would like to introduce the communication image between our "BRIDGECOM" and smartphones. "BRIDGECOM" can be connected to smartphones via a dedicated cable, allowing simultaneous calls with distant groups as long as there is access to a telephone line or internet connection. In addition to regular calls on smartphones, it is also possible to directly connect online meetings using calling apps with the field. 【Target Products】 ■BRIDGECOM X10 ■X10 Compact ■X10 Athlete ■X5 *For more details, please download the PDF or feel free to contact us.

"ALVO1.9" is a product that processes surrounding noise in real-time, supporting clear voice calls even in noisy environments. With ultra-low latency communication that allows multiple people to speak simultaneously, sharing can be done in real-time. Even in environments with various wireless devices, the voices from the field will not be drowned out. With AES-256 encryption, we ensure a high level of security required for business applications. 【Features】 ■ Noise countermeasures, security, visibility, room division ■ Thinness and lightness that make you forget you’re wearing it ■ Stable calls even in crowded environments with 1.9GHz DECT ■ Flexible connections and charging tailored to the field ■ Scalability that meets the demands of tough environments *For more details, please download the PDF or feel free to contact us.

This is a wireless communication device that processes surrounding noise in real-time and supports clear voice calls even in noisy environments. In settings where various wireless devices are in use, there has been a challenge of inaccurate instructions being conveyed due to radio interference and call interruptions. This product adopts the 1.9GHz DECT method, maintaining stable call quality even in crowded environments. With ultra-low latency communication that allows multiple people to speak simultaneously, real-time information sharing on-site is possible. It supports high-level AES-256 encryption to prevent the leakage of confidential information. Its slim and lightweight design makes it comfortable to wear for long periods, and it also supports Bluetooth connectivity for flexible operation. ■ Stable calls in crowded environments achieved through the adoption of the 1.9GHz DECT method ■ Noise reduction function that processes surrounding noise in real-time ■ Ultra-low latency simultaneous call system allowing multiple people to speak at the same time ■ Reliable security measures with high-level AES-256 encryption ■ Slim and lightweight design that minimizes burden during long-term wear and offers high expandability *For more details, please download the materials or feel free to contact us.*