デレーコ・ジャパン List of Products and Services

■Radar gauge (microwave type, technical conformity certification number: 209-J00487) ■Measurement range: two models of 8m and 20m ■Frequency: 63GHz ■Beam angle: 6° ■External dimensions: 135mm (height) x 102mm (diameter) ■Weight (sensor body): 1kg ■Accuracy: 2mm ■Startup time: warm boot 5 seconds, cold boot 10 seconds ■Suitable for IoT connection (e.g., river level measurement) ■Operating temperature for atmospheric pressure: -40 °C to +80 °C ■Dead zone: 75mm (from drip shield) ■Waterproof rating: IP68 (0.3MPa, 24 hours) ■Voltage input: 12-28VDC ■Current consumption: 3.8-22mA ■DATEM (mask) function: removes obstacles on the software. ■Bluetooth connection: configurable from PC, tablet, or smartphone ■Bluetooth range: up to 40m ■Cable length (direct sensor output): selectable from 5m, 10m, 20m, 30m ■Body material: Valox ■PVDF front thread (optional) securely attached to REFLECT body via plastic chemical welding ■Direct volume output (4~20mA) from REFLECT based on tank shape input possible

• Water quality/pH measuring device

The "PTFM 1.0" is a portable time-of-flight flow meter used for measuring clean liquids (such as water, chemicals, and oils) with less than 2% suspended solids or bubbles. It can be installed on pipes in both vertical and horizontal orientations using ultrasonic transducers. It features a built-in nickel-metal hydride battery that allows for continuous operation for up to 18 hours, and the operating temperature for the electronic components is -20°C to +60°C. 【Features】 ■ Used for measuring clean liquids (such as water, chemicals, and oils) with less than 2% suspended solids or bubbles ■ Ultrasonic transducers can be installed on pipes in both vertical and horizontal orientations *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "PDFM 5.1" is a portable Doppler flow meter suitable for monitoring and adjusting flow, as well as detecting issues related to the flow in full pipes. It can be installed, calibrated, and started in just a few minutes. It is ideal for evaluating the performance of inline flow meters. 【Features】 ■ Suitable for monitoring and adjusting flow, and for detecting issues related to flow in full pipes ■ Ideal for evaluating the performance of inline flow meters ■ Can be installed, calibrated, and started in just a few minutes *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "Manta Ray" is a portable surface velocity flow meter that measures the water level and flow velocity in open channels and non-full pipes, and calculates the flow rate. It is capable of measuring flow rates, investigating infiltration and inflow, and utilizing its portable characteristics to conduct surface velocity flow measurements in various locations. It is suitable for measuring sewage flow, rainwater flow, irrigation flow, and environmental flow. 【Features】 ■ Measures water level and flow velocity in open channels and non-full pipes, and calculates flow rate ■ Utilizes its portable characteristics to conduct surface velocity flow measurements in various locations ■ Well-suited for measuring sewage flow, rainwater flow, irrigation flow, and environmental flow *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

"Flow Pulse" is a flow meter that can be clamped onto the outside of pipes and easily secured with a screwdriver. It offers exceptional reproducibility at a fraction of the cost of equivalent magnetic flow meters. It is capable of reliably monitoring the flow of pipes made from various materials, including hard plastic, stainless steel, cast iron, and even corrugated pipes. 【Features】 ■ Clamps onto the outside of pipes and can be easily secured with a screwdriver ■ Provides exceptional reproducibility at a fraction of the cost of equivalent magnetic flow meters ■ Capable of reliably monitoring the flow of pipes made from various materials *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

In offshore wind condition observation, there are methods such as building a wind measurement mast at sea or measuring from land using a scanning lidar. Considering accuracy and other factors, building a wind measurement mast at sea is indeed the best option, but there are many challenges such as cost, time, and applications. Therefore, we propose a method of floating a buoy at sea and measuring vertical wind conditions with a lidar. The attached buoy will be floated offshore, anchored to remain stationary, and powered by a battery, solar panels, and wind turbine. The lidar used is the proven "ZX 300M." If you have any questions regarding costs, please feel free to contact us. *You can download the English version of the catalog. *For more details, please refer to the PDF materials or feel free to contact us.

• others

Kintech's "Wind Condition Observation System" consists of a new data logger and sensor technology that complies with IEC61400-12. It is possible to remotely collect data from all observation sites using ATLAS software. With simple panel operations, data such as equipment status and observation site history are visualized. 【Features】 ■ Built-in cellular modem with global SIM card ■ No fixed IP address required ■ Built-in GPS module ■ Real-time monitoring (24 hours) ■ Built-in battery backup (100 days) *For more details, please refer to the PDF document or feel free to contact us.

• Anemometer

The "ZX 300M" is a marine Doppler lidar that can be installed on any type of commercial floating buoy and is designed for various types of offshore platforms. It significantly contributes to reducing the costs of wind condition observation and has achieved higher precision in measurements at altitudes exceeding that of meteorological masts. With a design and functionality specialized for operations at sea, it has been proven to be installable and adaptable to all types of commercial lidar platforms. 【Features】 ■ Measures distances from the deck up to 10-200m+ ■ Design and functionality specialized for operations at sea ■ A long three-year warranty, the longest among offshore lidars ■ Installable and adaptable to all types of commercial lidar platforms *For more details, please refer to the PDF materials or feel free to contact us.

• Anemometer

The "ZX 300" is a ground-based Doppler lidar designed to withstand harsh operating environments and aimed at social implementation. It can measure at heights higher than meteorological masts and across the entire site, reducing observational uncertainty. Since there is no need to work at high altitudes, safety and health requirements on-site are more reliably met, and rapid wind condition assessments can begin without the need for prior site preparation or permit applications. 【Features】 ■ Remote observation of winds at heights of 10 to over 200 meters ■ More reliable safety and health requirements on-site ■ Compact design allows for flexible adaptation to various applications ■ No need for prior site preparation or permit applications ■ Fully compliant with IEC 61400-12-1:2017 【We will be exhibiting at WIND EXPO "Wind Power Generation Exhibition"】 Date: August 31 (Wednesday) to September 2 (Friday), 2022, 10:00 AM to 5:00 PM Venue: Makuhari Messe Booth: E-12-39 *For more details, please refer to the PDF materials or feel free to contact us.

• Anemometer

The demands of the SDGs have become socially important, and our company is also proposing offshore wind power generation equipment to various companies. Our solution involves equipment that investigates wind conditions before the construction of wind power turbines, which can be broadly categorized into "onshore wind power" and "offshore wind power." Offshore wind power is advantageous due to the stable wind conditions it provides. For offshore wind condition surveys, there is a method of erecting a Met Mast offshore, but our proposal is to conduct "wind condition observation" using Lidar instead of erecting a mast. Please feel free to contact us if you have any inquiries. 【Service Contents】 ■ Wind condition surveys for onshore wind turbines ■ Wind condition surveys for offshore wind *For more details, please refer to the PDF materials or feel free to contact us.

• Wind power generation

In this document, we introduce numerous examples of applications for Pulsar products. We include examples of applications for level meters, flow meters, and interface meters, along with photographs. Please refer to this when utilizing the company's products. [Contents] ■ Examples of level meter applications ■ Examples of flow meter applications ■ Examples of interface meter applications *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment
• Water supply facilities
• Drainage and ventilation equipment

We are the official distributor of Pulsar. We introduce their products for water treatment and water-related applications. Starting with the "Water and Wastewater Market," which includes pump control and monitoring of river and irrigation flow and water levels, their products are also utilized in the "Environmental Market," "Food Market," "Mining and Quarrying," and "Chemical and General Industries." 【Water Treatment and Water-Related Applications】 ■ Water and Wastewater Market ■ Environmental Market ■ Food Market ■ Mining and Quarrying ■ Chemical and General Industries *For more details, please refer to the PDF materials or feel free to contact us.

• Water Treatment
• Water supply facilities
• Drainage and ventilation equipment

The "dB Series" is a non-contact ultrasonic transducer that measures water level, volume, and flow rate. We offer a variety of models tailored to different measurement environments, allowing you to choose according to your needs. The operation of this product requires a Pulsar controller. 【Features】 ■ Non-contact ultrasonic level gauge ■ Measures water level, volume, and flow rate ■ Measurement range: 3m to 50m ■ Used in combination with Pulsar controller *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "MicroFlow & MicroFlow-i" is a non-contact radar flowmeter that measures flow velocity by sending short pulses to the flowing surface and measuring their reflections. Due to its very low power consumption, it is suitable for flow measurement in locations where power supply is difficult, such as monitoring combined sewer overflows (CSO). Designed for flow measurement in open channels, this product can be combined with Pulsar level meters and controllers to create an ideal flowmeter system. 【Features】 ■ Radar flowmeter ■ Accuracy: ±1.5% or the greater of 0.05m/s (MicroFlow-i) / ±0.5% or the greater of 0.05m/s (MicroFlow) ■ Communication: HART communication protocol or 4-20mA loop current signal (MicroFlow-i) / RS485 Modbus RTU (MicroFlow) *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

"IMP Lite" is a highly reliable non-contact ultrasonic level gauge. Digital echo processing is suitable for measuring slurries and liquids, and it is adaptable for various applications such as level display on the main unit's screen, connection to control systems via analog output, and display on other screens. Additionally, the IMP series offers optional wetted parts made of corrosion-resistant PVDF (polyvinylidene fluoride), making it suitable for harsh applications and further expanding its range of use. 【Features】 ■ Affordable model at a low cost ■ Compact and energy-efficient integrated sensor ■ 4-digit LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "Sludge Finder 2" is a reliable ultrasonic interface level meter that accurately measures the interface level of primary or secondary sludge tanks and SBR systems. It uses ultrasonic measurements and a unique advanced digital echo processing technology with proven echo processing algorithms to identify the sludge interface level. 【Features】 ■ Ultrasonic sludge interface level meter ■ Bipart transducer with self-cleaning function ■ Capable of measuring sludge interface (sludge blanket) ■ Output: 4-20 mA, RS232 ■ Six form "C" (SPDT) 5A, 110V AC *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

"IMP+ (Inpu Plus)" is a highly reliable non-contact ultrasonic level gauge. Digital echo processing is suitable for measuring slurries and liquids, and it is versatile for various applications such as level display on the main unit's display, connection to control systems via analog output, and display on other screens. It is available in three types with measurement ranges of 3m, 6m, and 10m, and you can choose between 2-wire or 3-wire configurations. Additionally, as features of this product, it includes an LCD display, a digital thermometer with temperature compensation, and two relay outputs (if using the 3-wire configuration). [Features] ■ Compact non-contact ultrasonic level gauge ■ 2-wire or 3-wire configuration ■ LCD display *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

The "dBi HART Level Gauge Series" is an integrated intelligent non-contact ultrasonic level transducer that can be easily integrated into plants using the HART communication protocol. It is suitable for level measurement of liquids and solids. Measurement distances can be selected from 3m, 6m, 10m, and 15m. 【Features】 ■ Uses HART communication protocol ■ Easily integratable into plants ■ Measurement distances available in 3m, 6m, 10m, and 15m *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments