ハイブリッジ List of Products and Services

The "HVTB-1100" is a thermal balance device capable of measuring weight changes in metallic materials in an argon gas or vacuum atmosphere. The sample heating device can heat up to 1100°C using an open-type tubular furnace (visible during heating through a side quartz window). The vacuum exhaust unit is separate from the oil rotary vacuum pump and turbo molecular pump assembly, allowing it to be connected to other devices for vacuum exhaust. 【Features】 ■ Clean exhaust in the chamber and high vacuum achieved through turbo molecular pump vacuum exhaust ■ Maximum heating temperature of 1100°C, with a typical operating temperature of 1000°C ■ Direct gas introduction into the metal material in the sample crucible from the upper port of the observation chamber ■ Vacuum pressure adjustment range of 10 to 1000 Pa ■ Structure designed to minimize temperature drift due to the water-cooled jacket surrounding the balance *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "High Vacuum Compatible Gate Valve" features a bellows shaft seal suitable for high vacuum, a lubricant-free mechanism, and a compact design. It offers a variety of options with low vibration and high quality, all at a reasonable price. 【Specifications (Excerpt)】 ■ Leak Rate - Body (Metal Seal): 2.7×10^-11 Pa·m³/sec - Body (Buna Seal): 2.7×10^-10 Pa·m³/sec - Gate Section: 1.3×10^-9 Pa·m³/sec ■ Operating Vacuum Range: Atmospheric Pressure to 2.7×10^-11 Pa·m³/sec ■ Pressure: 5 Kgf/cm² ■ Installation Orientation: Free *For more details, please refer to the PDF document or feel free to contact us.

• others

Since a non-magnetic heating source is used, high-temperature heat treatment can be performed in a magnetic field. After heat treatment, it can be moved to a cooling chamber while maintaining the atmosphere, allowing for gas cooling through gas flow. Additionally, it is equipped with a cooling water circulation system and various interlocks, and can be optionally fitted with heat treatment chambers for outer diameters of 50 and 60. 【Specifications (excerpt)】 <Heat Treatment Chamber/Heating Mechanism> ■ Outer diameter 40 × length 236 mm, water-cooled double SUS316L cylindrical type ■ Achievable pressure: below E-3 Pa ■ Vacuum exhaust/gas introduction: SWG1/4 bellows valve ■ Heating method: Carbon cylindrical heater ■ Sample holder: φ15 × φ12 × 50L quartz crucible *For more details, please refer to the PDF document or feel free to contact us.

• others

A lightweight and compact magnetic field generation device capable of generating a magnetic field of 0.5T with a 40mm gap is adopted. It automatically controls the temperature-dependent measurements of electrical resistance, Hall effect, and thermoelectric properties, calculates electrical resistivity, Hall coefficient, carrier density, etc., and extracts data to Excel. Additionally, each measurement data is displayed in real-time with numerical values and graphs. 【Features】 ■ Wide range of temperature measurements from ultra-low temperature (4.2K) to room temperature (300K) ■ High-power refrigerator capable of cooling from the sample set to 4.2K in about 2.5 hours ■ External control of the refrigerator, temperature control, and bipolar power supply ■ Automatic simultaneous measurement of electrical resistance, Hall effect, and thermoelectric properties is possible *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

It supports a variety of samples and can measure samples up to 10mm in size. The multi-stage radiation shield and three-stage vacuum chamber structure make sample exchange easy. With the push of a button, temperature control can be achieved from room temperature to ultra-low temperatures. (Temperature adjustment requires a temperature sensor and temperature controller [optional].) 【Specifications (excerpt)】 ■ Variable temperature sample stage: 10mm oxygen-free copper stage with screw-type 8 terminal block ■ Cooling mechanism (air-cooled two-stage cryostat) - Stage 1: 3.0W @60K - Stage 2: 0.1W @4.2K ■ Temperature control range: 300K to 4.2K ■ Vacuum chamber: three-stage vacuum chamber *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "HVE-100" is a compact vacuum deposition device that saves space. The substrate deposition surface is oriented downward, and the configuration allows for upward deposition through evaporation from a resistance heating source (deposition up). It is equipped with a shutter, enabling stable deposition. 【Features】 ■ High vacuum exhaust system: Achieves a vacuum level of <10^-4Pa for clean film formation ■ The chamber is made of SUS for easy maintenance, with anti-deposition plates arranged inside ■ Space-saving/compact design: Desktop model with dimensions of W500×D395mm ■ Compatible with your existing exhaust system and film thickness gauge *For more details, please refer to the PDF document or feel free to contact us.

• others

The "TBB-6000" is a controller that supports manual operation via a touch panel and remote operation from an interface. In addition to basic positioning functions, it has expandability, allowing for customization and OEM production based on your requests. 【Features】 ■ For 5-phase stepping motors ■ Microstepping ■ Built-in motor driver ■ Can be stored in a 19-inch rack 【Examples of Customization and System Upgrades】 ▼ Axis expansion: 12 axes, 18 axes, 24 axes ▼ Driver changes: For motors with electromagnetic brakes, high torque large motors ▼ Automatic operation: Start/stop operation via external sensors ▼ Safety mechanisms: Incorporation of interlocks and safety devices ▼ Linear and rotary stages in a vacuum ▼ Positioning devices for high and low-temperature environments *For more details, please refer to the PDF materials or feel free to contact us.

• others