多田プラスチック工業 List of Products and Services

It is a diaphragm pump type dry vacuum pump. It is used for various applications. 【Specifications】 ■Material: Resin, rubber, assembled products ■Lot: 1,000 to 10,000 units ■Industry: Automotive (mass production), electronics and home appliances, medical devices, semiconductor equipment *For more details, please refer to the PDF document or feel free to contact us.

• System toilet

This is a diaphragm pump type dry vacuum pump. It is used for various applications. 【Specifications】 ■ Material: Resin, rubber, assembled products ■ Lot: 1,000 to 10,000 units ■ Industry: Automotive (mass production), electronics and home appliances, medical devices, semiconductor equipment *For more details, please refer to the PDF document or feel free to contact us.

• System toilet

Achieve the transportation of large volumes of gas compared to our conventional pumps! In a three-cylinder structure compared to a single-cylinder structure: - The cycles of suction, compression, and discharge are evenly distributed, reducing pulsation. (Low pulsation) - Operating noise is also suppressed. (Quiet operation) 【Specifications】 - Material: Resin, rubber, assembled products - Lot: 1,000 to 10,000 units - Industries: Automotive (mass production), low voltage/electronics, medical devices, beverage dispensers *For more details, please refer to the PDF document or feel free to contact us.

• System toilet

High magnification foaming molding by expanding the mold cavity volume and enlarging the bubbles.

• container

Ceramic injection molding is a molding method in which a compound made by mixing ceramic powder with a binder and moisture is injected and filled into a mold at a temperature above the melting point of the resin, followed by cooling and solidification within the mold. It is suitable for mass production of complex shapes and high-precision products.

• Picking System

Representative size 225L box internal dimensions: Length 620 × Width 615 × Height 590 External dimensions: Length 700 × Width 695 × Height 670 Volume: 225L Weight: 8kg Color change available (gray, blue, others) Logo printing available Size change available (We can accommodate sizes over 200L, please consult us)

• Packaging materials

It is a small DC diaphragm pump with low noise and low pulsation. Low noise, low pulsation, compact, lightweight, self-priming. Rubber parts are mainly available in EPDM. It is used in various applications. 【Specifications】 ■ Material: Resin, rubber, assembled products ■ Lot: 1,000 to 10,000 units ■ Industries: Automotive (mass production), low voltage & home appliances, medical devices, beverage dispensers *For more details, please refer to the PDF document or feel free to contact us.

• System toilet

The "Craft Cooler Cube" is an eco-friendly, high-performance, and low-cost insulated box made of cardboard. It is compact upon delivery and can be stored in a space-saving manner in a warehouse. Inside, it contains polyurethane used in refrigerators, and by combining it with ice packs, it can transport fresh products without using refrigerated shipping. 【Features】 ■ Logo printing available ■ Water-repellent treatment available ■ Easy personal disposal ■ Simple assembly in 10 seconds *For more details, please refer to the PDF document or feel free to contact us.

• Packaging materials

Wipeable with disinfectant spray partition (aluminum frame) As a measure against droplets from the new coronavirus, it can be washed thoroughly with water. The surface is made of resin board, and the frame is made of aluminum, making it safe. □□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□ Tada Plastic Industry Co., Ltd. 2-12-8 Tsudo, Fujiidera City, Osaka Prefecture 583-0037 TEL: 072-952-6163 FAX: 072-952-0910 http://www.tadapla.co.jp Turning ideas into "form" with technology. Fusion of technologies - Injection molding - Urethane molding - Micro pumps - Precision rubber molding □□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□

• Other wall materials

Proposal for Cold Storage Delivery Box 225L 1. No need for expensive mold investment. 2. Sizes can be developed freely. 3. High-performance urethane is used as insulation material, allowing for long-lasting cold retention. 4. Lighter materials are used compared to standard cooler boxes, achieving over 30% weight reduction. Large Size Internal dimensions: 620mm (length) × 615mm (width) × 590mm (height) External dimensions: 700mm (length) × 695mm (width) × 670mm (height) Capacity: 225L Weight: 8kg * Equipped with a handle. Since there is no need for expensive mold investment, it is easy to make specification changes such as adjusting the thickness of the urethane to match the required insulation performance. Other Size and Design Options 1. Basic color changes are possible (gray, silver, and others). 2. Printing of logos and other designs is possible. 3. Customization for small lot sizes is possible.

• container

Proposal for Insulated Delivery Box 29L Maintains the temperature of ice packs for 9.5 hours (below 10°C) 1. No need for expensive mold investment 2. Size can be developed freely 3. Uses high-performance polyurethane as insulation material. Enables long-lasting insulation. 4. Uses lighter materials than typical cooler boxes, achieving over 30% weight reduction. Medium Size Maintains the temperature of ice packs for 9.5 hours (below 10°C) Internal dimensions: 310mm (H) x 440mm (W) x 215mm (D) External dimensions: 390mm (H) x 520mm (W) x 295mm (D) Capacity: 29L Weight: 3kg * Insulated partition can be installed * Comes with shoulder strap * Equipped with anti-theft wire Since no expensive mold investment is required, specification changes such as adjusting the thickness of the polyurethane can be easily made to match the required insulation performance. Other Size and Design Options 1. Basic color changes are possible (gray, silver, etc.) 2. Printing of logos and other designs is possible 3. Customization for small lot sizes is possible

• container

Proposal for Cold Storage Delivery Boxes: Size and Design Variations 1. No need for expensive mold investments. 2. Sizes can be developed freely. 3. High-performance polyurethane is used as insulation material, allowing for long-lasting cold storage. 4. Lighter materials are used compared to typical cooler boxes, achieving over 30% weight reduction. Since expensive mold investments are not required, it is easy to make specification changes, such as adjusting the thickness of the polyurethane, according to the necessary insulation performance. Size and Design Variations: 1. Basic color changes are possible (gray, silver, and others). 2. Printing of logos and other designs is possible. 3. Customization for small lot sizes is available.

• container

Proposal for Insulated Delivery Boxes: 20L, 29L, 225L 1. No need for expensive mold investment. 2. Sizes can be developed freely. 3. High-performance urethane is used as insulation material, allowing for long-lasting cooling. 4. Lighter materials are used compared to typical cooler boxes, achieving over 30% weight reduction. Since there is no need for expensive mold investment, it is easy to make specification changes, such as adjusting the thickness of the urethane, according to the required insulation performance. Other size and design options: 1. Basic color changes are possible (gray, silver, and others). 2. Printing of logos and other designs is possible. 3. Customization for small lot sizes is available.

• container

Proposal for Insulated Delivery Box 20L Maintains the temperature of ice packs for 12.5 hours (below 10℃) 1. No need for expensive mold investment 2. Size can be freely developed 3. Uses high-performance polyurethane as insulation material. Capable of long-term cooling. 4. Uses lighter materials than typical cooler boxes, achieving over 30% weight reduction. Small Size Maintains the temperature of ice packs for 12.5 hours (below 10℃) Internal dimensions: 345mm (L) × 275mm (W) × 215mm (H) External dimensions: 425mm (L) × 355mm (W) × 295mm (H) Capacity: 20L Weight: 2kg * Equipped with anti-theft wire Since no expensive mold investment is required, specification changes such as adjusting the thickness of the polyurethane can be easily made to match the required insulation performance. Other Size and Design Options 1. Basic color changes are possible (gray, silver, and others) 2. Printing of logos and other designs is possible 3. Customization for small lot sizes is possible

• container

"Soft polyurethane foam" is flexible and has a good feel, widely used as cushioning material for automotive seat cushions, chairs, and mattresses, as well as for kitchen sponges in general households. Additionally, it can be easily deformed through compression, allowing for profile processing and shearing processing, and methods such as thermal processing can also be utilized. This enables the production of special-shaped microphone windshields and profile-processed products with uneven patterns, providing characteristics that are difficult to achieve with other soft foam materials. Our company offers a wide range of support from planning to mass production. [Features] ■ Various physical properties and performance can be imparted according to requirements ■ Cutting and molding processing in various shapes is possible ■ Various adhesive and integrated processing methods can be selected according to the application *For more details, please download the PDF or feel free to contact us.

• Picking robots (shelf transport robots, arm picking robots)