ソーキ List of Products and Services

It is a first-class level with a standard deviation of 0.2mm for a 1km round trip.

• Surveying

It remembers data for 16 types of trees, and by calling up the sample number, measurements can be taken directly without conversion. 【Features】 ■ Direct measurement of 16 types of wood. It stores data for 16 species of trees. By calling up the sample number, measurements can be taken directly without conversion. ■ Upper limit alarm setting. It can be set to emit an alarm sound when the moisture content exceeds the management upper limit. The setting range is between 10% and 39%. ■ Moisture value correction. The displayed moisture value can be corrected between -9.9% and +9.9% to match the actual conditions. ■ Temperature correction function. If there is a significant temperature difference, such as between the room temperature at the measurement location and the wood immediately after drying, it will affect the measurement values. This will be automatically corrected. ■ Auto power-off function. If no operation is performed for about 5 minutes, the power will automatically turn off.

• Non-destructive testing

■It records vibrations electronically using a 3-axis accelerometer. ■No battery replacement is needed for up to 60 days. *Recorded data can be imported into the standard attached software using USB.

• others

- The static penetration resistance of the soil is measured to determine its hardness or softness, or the composition of the soil layers, and it is used for preliminary surveys or supplementary investigations such as boring for weak layers within a depth of 10 meters. - It is based on the JIS draft of the Japanese Geotechnical Society and is applicable to all soil layers excluding gravel as an auxiliary method for the standard penetration test.

• Geological Survey

■ Standard equipped with high-speed response DO sensor ■ No cables needed with large-capacity built-in memory ■ Built-in rechargeable lithium-ion battery ■ Vertical observation possible with a minimum pitch of 10cm ■ Short-term temporal observation possible ■ Compact and lightweight, approximately 2.0kg in air and about 1.0kg in water

• Water quality/pH measuring device

■Measurement range: -99.9 to 99.9 Pa ■Compact, lightweight, and pocket-sized. ■Can switch between four units and display maximum/minimum values, with a HOLD function to freeze the displayed value.

• Other measuring instruments

■ It can calculate, display, and output changes in continuous measurement values as flow rates. ■ It is equipped with a data memory function that can record measurement values, calibration results, and multiple unit masses. ■ It has a display hold function that can also accommodate animal weighing.

• Other measuring instruments

■Water level measurement work can be performed without grounding. ■Due to the use of a small cross-section and thick material (fiberglass), it is less likely to stick to the inner surface of the pipe. ■Sensitivity can be adjusted, allowing for good performance across a wide range of water qualities. ■The test function allows for the determination of disconnection.

• Hydrological survey

■ Inspections of bridge piers, under the girders, and support areas can be conducted from the bridge deck. ■ Easy operation with a tablet PC. ■ Capable of capturing still images while recording video. ■ Lightweight and compact, making it convenient to carry. * With a 30x optical zoom, even small damages can be detected from a distance. * Contrast correction, image stabilization, and fog removal features allow for accurate inspections even under poor conditions.

• Non-destructive testing

■Automatically adjusts optimal sensitivity according to flow rate ■Compact, lightweight, and low power consumption ■Capable of measuring average flow rates at 1 second / 3 seconds / 5 seconds / 10 seconds / 20 seconds / 40 seconds / 60 seconds ■Easy to read with a large LCD display ■Detector compatibility through coefficient settings

• Hydrological survey

■Compatible with various refrigerants Supports almost all refrigerants including new refrigerants, conventional refrigerants, and HC refrigerants. *Excludes R12 ■Easy identification of leak points The gas sampling method is suction-based, making it easy to identify leak points. ■Compact and lightweight Designed to be compact, making it easy to hold and fit into pockets. ■Equipped with automatic pump stop function In case of accidental water suction or when the attachment tip is blocked, if a temporary pump error occurs, pressing the switch will return it to normal gas detection. ■Automatic gas exhaust mode If there is gas remaining in the device when turning off the power, it automatically enters 'automatic gas exhaust mode' and will turn off the power once the gas has been expelled from the device. (Up to 60 seconds) ■Protection rating IP22 (equivalent to JIS C 0920) Prevents failures due to rainwater intrusion. *When equipped with a leather case

• Environmental Survey

■ Self-management of harmful chemicals. Ideal for the safe management of chemical substances subject to mandatory risk assessment. Capable of measuring multiple types of gases with one device, effectively improving work efficiency. ■ Japanese/English display available. Supports multilingual display including Japanese, making it easy to change settings and perform operations. The full dot display makes both text and numbers easy to read. ■ Screen automatically flips with movement. The screen automatically rotates 180 degrees in response to movement. It can also be fixed with an ON/OFF switch. ■ Equipped with an LED light to illuminate the front. The LED light can be easily turned on by pressing and holding a button. The screen also has a backlight, enhancing work efficiency in dark environments.

• Environmental Survey

■Self-management of harmful chemicals Ideal for the safe management of chemical substances subject to mandatory risk assessment. Capable of measuring multiple types of gases with one device, effectively improving work efficiency. ■Japanese/English display available Supports multilingual display including Japanese, making it easy to change settings and perform operations. The full dot display makes both text and numbers easy to read. ■Screen automatically flips with movement The screen automatically rotates 180 degrees in response to movement. It can also be fixed with an ON/OFF switch. ■Equipped with an LED light to illuminate the front Feel secure even in dark places with the LED light! The LED light can be easily turned on by pressing and holding a button. The screen also has a backlight, improving work efficiency in dark environments!

• Environmental Survey

■Film Thickness Measurement Range The measurement range for thick films up to 15mm can be digitally displayed with a resolution switch of 0.1mm/0.01mm, enabling high-precision measurements. ■Limit Alarm Function The film thickness of the measurement target can be set with upper and lower limits. An alarm sound will warn if the measurement is below or above the target value. ■Key Lock Function Pressing the lock button during measurement locks all keys except the OFF key, preventing erroneous operations and safely maintaining the functionality of the main unit. ■CVD Magnetic Pole The magnetic pole of the single-point constant pressure probe uses a super wear-resistant CVD-treated magnetic pole, maintaining initial characteristics and high reproducibility even under harsh conditions for extended periods. ■Easy-to-Read Digital Display A large LCD display with an attached magnifying lens enhances visibility. The digital display allows for quick and accurate readings. ■Compact Size With a slim, lightweight body, it offers easy operation. This compact size is user-friendly, condensing excellent functionality.

• Structural Survey

■Intrinsic safety explosion-proof structure (Exia2 CT4X) ■Protection level equivalent to IP67, ensuring safety for outdoor work ■Simultaneous display of two-component gas concentrations (Hydrogen sulfide / H2S and Sulfur dioxide / SO2) on a large LCD screen ■Equipped with clock display and data logging function ■Ideal for ensuring the safety of each worker in their surroundings

• Environmental Survey

■ Direct reading of surface salinity concentration using four methods - Water-soluble salinity concentration display (PSPC compatible) - Water-soluble salinity concentration display (using conversion formula from ISO 8502-9) - Sodium chloride concentration display - Electrical conductivity display ■ Easy measurement The measurement cell is fixed by magnetic force, and by simply injecting the measurement water (pure water), the surface salinity concentration can be measured. There is no need for the cumbersome operation of wiping the surface of the measurement target and extracting it into a solution. ■ Measurement cell fixed by magnetic force Unlike the Bresle method, it does not dirty the surface with adhesive. *The measurement target must be a flat magnetic material. ■ The main unit and measurement cell are compact and lightweight for easy portability.

• Non-destructive testing

■ Direct reading of surface salinity concentration using four methods - Water-soluble salinity concentration display (PSPC compatible) - Water-soluble salinity concentration display (using conversion formula from ISO 8502-9) - Sodium chloride concentration display - Electrical conductivity display ■ Easy measurement The measurement cell is fixed by magnetic force, and by simply injecting the measurement water (pure water), the surface salinity concentration can be measured. There is no need for the cumbersome operation of wiping the surface of the measurement target and extracting it into a solution. ■ Measurement cell fixed by magnetic force Unlike the Bresle method, it does not dirty the surface with adhesive. *The measurement target must be a flat magnetic material. ■ The main unit and measurement cell are compact and lightweight, making them easy to carry.

• Non-destructive testing

■Heating drying and mass measurement method most similar to the standard drying method ■Adopts high-precision aluminum integrated mass sensor 'Uniblock' ■Employs a new auto tare mechanism ■Uses medium-wavelength infrared quartz heater as the heat source ■Offers six measurement modes to meet various measurement requirements ■Allows registration and storage of ten types of measurement conditions (drying temperature and measurement mode) ■Displays the moisture change amount (△M) over 30 seconds in both numerical and scale formats ■Can be connected to a printer *Printer VZ-330 is an optional item.

• Other measuring instruments

■Carefully Selected Essential Functions In addition to the basic functions necessary on-site, we have condensed additional features that expand the scope of work. This enables efficient surveying operations without waste. ■Easy Operation with Fewer Keys The number of keys is kept to a minimum. The key layout prevents mispressing, allowing for smooth operation even with gloves on, thanks to the 'Back' key for when you're in trouble and the large, easy-to-press 'Distance Measurement' key. ■Convenient Simple Manual A handy manual that covers basic operations, making it easy to check the operating procedures on-site. ■Clear Display Section The display is in Japanese, with an easy-to-read font and large characters, allowing for instant judgment on-site and improving work efficiency. ■High-Speed Distance Measurement High-speed distance measurement of approximately 1.6 seconds for both initial and continuous measurements. This reduces stress during work and is expected to significantly enhance efficiency. ■Nikon Lens The telescope's field of view is bright and clear, making a noticeable difference, especially during evening work. ■Wide Measurement Range Using a mini prism, it is capable of measuring distances up to 1,000 meters. It performs exceptionally well even on large construction sites. ■Convenient AA Battery-Type Battery Powered by four AA Ni-MH batteries, it can be used continuously for 6 hours. Fully charged AA batteries can sufficiently cover a day's work.

• Surveying

■Flow velocity values from microflow to high flow can be obtained through digital output. ■Handling and maintenance are very simple. ■Equipped with a memory function. ■Can be used in the field at a water depth of 3 cm. ■Data from up to 255 measurement points can be recorded along with calendar information. ■Data processing is possible using a computer.

• Hydrological survey

■Measure resistance values with weak electricity, allowing for non-destructive verification of steel material quality. ■Up to 200 measurement data can be stored. ■Two types of sample pieces are included as standard, allowing for accuracy verification at any time. ■Sandpaper and file are also included as standard, enabling immediate inspection preparation. ■Measurements can be taken in locations without power supply using the built-in battery.

• Non-destructive testing

■Range: 0.001 to 3.999 mg/m³ ■Measurement method: Light scattering method

• Environmental Survey

■Outstanding Visibility High-brightness LEDs are used to provide outstanding visibility even during outdoor work. Moreover, by using three colors of LEDs to indicate the status of the grade, intuitive judgment is made possible. Additionally, it is equipped with a four-level detection accuracy switching function, making it compatible with all types of work from dozers to excavators. ■Reliable Environmental Performance The sensors installed on dozers and excavators endure more load than one might expect. They are equipped with vibration resistance performance that ensures safe use even under intense vibrations. The sensor installation uses front screws, allowing for easy and secure tightening. It also boasts an IP66 environmental performance rating, making it capable of withstanding harsh natural environments. ■Incredible Long Operating Time The device features an automatic brightness switching function for the LEDs according to the brightness of the work site. This has successfully led to a significant reduction in power consumption, achieving an astonishing 100 hours of operation on dry batteries.

• Surveying

■Wavelength range: approximately 305 to 2,800 nm ■Sensitivity: 5 mW (KW/m²)

• Hydrological survey

■Heat flow sensor connection One heat flow sensor (TR2-B) is included as standard. (We also offer rental options for low heat flow sensors (TM1-B) and surface type high heat flow sensors (T500B-B).) ■Compact and lightweight, convenient for portability ■Display switching allows for toggling between heat flow values in W/m², kcal/m²h, and temperature in °C. ■Internal memory The data memory can store 20 groups of settings, with a total of 100 sets. ■Adopts a dual power supply system using two AA batteries or an AC adapter.

• Other measuring instruments

■Japanese display ■Equipped with memory function for up to 500 data ■Simply pour the sample into the measuring container and set it on the instrument to display the results digitally ■Calculation measurement using 90℃ scattered light and transmitted light

• Water quality/pH measuring device

■Built-in statistical functions All memory data, as well as data by group, block, and session, can be statistically analyzed on the LCD screen. ■Easy-to-understand guide display screen Messages are displayed on the LCD screen, providing simple and clear guidance on the operation steps. ■Upper and lower limit limit function For each registered calibration curve, a set of limit values can be established. If the measurement value falls outside the upper/lower limit range, the set limit value will flash and an alarm will notify you. ■Slim body design reduces fatigue during handheld operation ■Calibration curve registration function ■Large-capacity measurement value memory function

• Structural Survey

■ Continuous hardness measurement possible from the soil surface to a depth of 1 meter ■ Measurement possible even in gravelly soil layers and consolidated soil layers (approximately 5 times at S value 0.1) ■ Handy type makes it easy to read, allowing measurements to be taken by one person ■ The included graphing software "Penetrodia Graph" allows for clear graphing of measured data, enabling immediate assessment of soil hardness quality

• Geological Survey

■Measurement can be taken in about 3 seconds after inserting the sensor into the soil. ■Built-in data logger function. ■Compact and lightweight for easy portability. ■Comes with dedicated software for managing data on a computer.

• Geological Survey

- The goal is to detect defects in the anti-corrosion and anti-rust properties of the coating and lining films without damaging the films. - Avoiding high frequencies that are prone to thermal destruction, measurements are conducted at low frequencies. - Achieving a compact and portable design by reducing power consumption and enabling battery operation. - Considering the degradation of the coating, a high-voltage pulse method is adopted to relatively reduce the application time of high voltage. - The discharge current is suppressed to avoid impacts on the human body and damage to the coating. - The structure allows for the confirmation of the voltage applied to the coating and voltage adjustments.

• Non-destructive testing

- The goal is to detect defects in the anti-corrosion and anti-rust properties of the coating and lining films without damaging the films. - Avoiding high frequencies that are prone to thermal destruction and measuring at low frequencies. - Achieving a compact portable design by reducing power consumption and enabling battery operation. - Considering the degradation of the coating, a high-voltage pulse method is adopted to relatively reduce the application time of high voltage. - Discharge current is suppressed to avoid impacts on the human body and damage to the coating. - The structure allows for confirmation of the voltage applied to the coating and adjustment of the voltage.

• Non-destructive testing

- The goal is to detect defects in the anti-rust and anti-corrosion properties of the coating and lining films without damaging the films. - Avoiding high frequencies that are prone to thermal destruction, measurements are conducted at low frequencies. - By reducing power consumption and enabling battery operation, miniaturization and portability are achieved. - Considering the degradation of the coating, a high-voltage pulse method is adopted to relatively reduce the application time of high voltage. - To avoid impacts on the human body and damage to the coating, the discharge current is suppressed. - The structure allows for confirmation of the voltage applied to the coating and voltage adjustment.

• Non-destructive testing

- The goal is to detect defects in the anti-rust and anti-corrosion properties of the coating and lining films without damaging the films. - Avoid high frequencies that are prone to thermal destruction and measure at low frequencies. - Achieve miniaturization for portability by reducing power consumption and enabling battery operation. - Considering the degradation of the coating, a high-voltage pulse method is adopted to relatively reduce the application time of high voltage. - The discharge current is suppressed to avoid impacts on the human body and damage to the coating. - The structure allows for confirmation of the voltage applied to the coating and voltage adjustment.

• Non-destructive testing

■ Battery-operated, allowing for field measurements. ■ You can choose reagents that suit your purpose from a diverse range of reagents. ■ Easy and rapid measurement. ■ Equipped with data memory function.

• Water quality/pH measuring device

- Equipped with a battery level meter function that allows you to see the battery remaining at a glance. - By simultaneously recording instantaneous water levels and rainfall, it is easy to assess water level fluctuations due to rainfall. - Wave damping function that averages wave data. - Simple menu operation with just three buttons.

• Hydrological survey

■It is a rebar detection system using electromagnetic induction. ■It can quickly and easily scan large areas of concrete. ■It displays 2D or 3D images of reinforcement on a tablet, allowing for structural analysis and cover thickness verification on-site. ■The included PC software allows for individual specification and analysis of the diameter of rebar in both vertical and horizontal orientations.

• Structural Survey

■Adjustments after power on can be easily made with the span adjustment button. ■Equipped with a large and easy-to-understand LCD screen. ■Intrinsically safe explosion-proof structure i3aG4.

• Environmental Survey

The tipping bucket rain gauge consists of a water receiving section and a recording section of a self-recording electric counter. The water receiving section is placed outdoors, while the recording section is installed indoors in the observation room, and both are connected by electric wires through a battery to operate.

• Hydrological survey

■ It can be easily measured with anchors on ceilings and walls. ■ It can also accommodate the neji-me anchor. ■ Using the included tools, measurements of up to 100kN (10.2tf) can be taken. ■ The following measurements can be made. Since the load and displacement are always displayed in 2 channels, you can continuously monitor the load and displacement until the confirmation load during the test. - Load can be switched between kN and tf - Displacement unit is mm - Maximum load can be switched to kN or tf - Displacement at maximum load is in mm

• Non-destructive testing

■Easy measurement of ceilings and walls Due to its lightweight design, it can be used for long periods without fatigue, allowing anyone to measure easily by themselves. ■Clear display of maximum values during testing The peak hold function retains the maximum displayed value. The lamp at the top right of the button lights up while peak hold is active. ■Easy to read in dark environments or at night The backlight can be turned on/off with the power switch, making it easy to read in dark places or at night. ■Print measurement data on the spot Pressing the print switch will print the date, time, set value (SET), measured value (MAX), and unit (kN). *Recording paper is sold starting from the first roll. ■No power cord needed It operates on batteries, so it can be used anywhere without needing a power source. (Uses 4 AA batteries)

• Non-destructive testing

■Easy measurement of ceilings and walls Due to its lightweight design, it can be used for long periods without fatigue, allowing anyone to measure easily by themselves. ■Clear display of maximum values during testing The peak hold function retains the maximum displayed value. The lamp at the top right of the button lights up while peak hold is active. ■Easy to read in dark places or at night The backlight can be turned on/off with the power switch, making it easy to read in dark areas or at night. ■Print measurement data on the spot Pressing the print button will print the date/time, set value (SET), measured value (MAX), and unit (kN). *Recording paper will be available for purchase starting from the first roll. ■No power cord required It operates on batteries, eliminating the need for a power source, so it can be used anywhere (uses four AA batteries).

• Non-destructive testing

■Easy measurement of ceilings and walls Due to its lightweight design, it can be used for long periods without fatigue, allowing anyone to measure easily on their own. ■Clear display of maximum values during testing The peak hold function retains the maximum displayed value. The lamp at the top right of the button lights up while the peak hold is active. ■Easy to read in dark places or at night The backlight can be turned on and off with the power switch, making it easy to read in dark areas or at night. ■Print measurement data on the spot Pressing the print button will print the date, time, set value (SET), measured value (MAX), and unit (kN). *Recording paper will be available for purchase starting from the first roll. ■No power cord required It operates on batteries, eliminating the need for a power source, so it can be used anywhere (uses four AA batteries).

• Non-destructive testing

■Ultra high brightness, maximum output in its class ■High precision ±1mm/10m ■2-way power supply with batteries and AC adapter ■Electronic leveling method strong against vibrations on site ■Can be mounted on a dedicated tripod

• Surveying

■ Direct drive with ultrasonic motor ■ A super compact body that re-evaluates the platform from scratch ■ Achieves 5.7 kg despite being a motor-driven total station ■ Automatic sighting function ■ Automatic tracking function ■ Bright and easy-to-see guideline

• Surveying

■The ultrasonic sensor detects people and objects within the detection area, issues a voice warning from the speaker, and simultaneously alerts the operator with an electronic sound. ■Each part can be easily attached and detached using a powerful magnet. ■The volume can be adjusted according to the working environment. (Maximum 95dB) ■The detection distance can be switched according to the application. (600mm, 1500mm) ■When a person or other obstacle enters the detection area, a voice warning "Please do not enter the restricted area" is issued. ■Simultaneously with detection, the operator is alerted with an electronic sound "Beep Beep Beep." ■Dustproof and drip-proof structure.

• others