オリオンセラミック　 List of Products and Services

(Technical Advice) Ministry of Land, Infrastructure, Transport and Tourism Housing Bureau, August 2, 2024 Regarding the handling of exterior wall tiles bonded with organic adhesives equipped with fall prevention measures in periodic inspection reports of buildings The rivet method has been treated the same as dry construction methods as a measure to ensure the safety of pedestrians, etc., in the context of "the condition of deterioration and damage of tiles, stone cladding, etc." *Documentation such as construction records is required. The rivet method mechanically secures tiles using rivets as fall prevention (detachment prevention) aids and fixes them to concrete screws attached to the structure with stainless steel wire (plate). It has a stable strength of over 800N (Newtons) and has many adoption records from local general contractors to major general contractors. [Features] ■ Tensile strength test data available (National Tile Inspection and Technology Association) ■ Stable strength of over 800N (81.5kgf) ■ Achievements of 800 sites and 20,000 square meters (rapid increase in recent years) ■ Numerous adoption records from local general contractors to major general contractors ■ Tile sizes from 300mm to 600×1200mm with a thickness of 6mm or more *For more details, please refer to the PDF document or feel free to contact us.

The "rivet processing" we perform is suitable for large-format tiles using an elastic bond adhesive combined anchor method. Additionally, "SUS net processing" is ideal for thin large-format tiles, and "hole-in-one processing" is well-suited for wet tiles, stone, and brick. We also offer "splash prevention with all-weather tape" and "splash prevention with back mesh processing." Please feel free to contact us when you need our services. 【Rivet Processing Features】 ■ For elastic bond adhesive combined anchor method ■ Suitable for large-format tiles ■ Tensile failure load is over 800N *For more details, please refer to the PDF materials or feel free to contact us.

At Orion Ceramic Co., Ltd., we perform "rivet processing" for fall prevention auxiliary fittings. The tile thickness is from 8.5mm, with a tensile failure load of 1,500N (equivalent to 152kgf) or more. Please feel free to contact us when you need our services. 【Overview】 ■ Tile thickness: 8.5mm and above ■ Available in two types: stainless wire and stainless plate ■ Tensile failure load: 1,500N (equivalent to 152kgf) or more *For more details, please download the PDF or feel free to contact us.

At Orion Ceramic Co., Ltd., we perform "SUS net processing" for fall prevention auxiliary fittings. The tile thickness ranges from 3mm to 6mm, making it suitable for thin large tiles (3,000mm + 1,500mm). The tensile failure load is over 1,500n (equivalent to 152kgf). Please feel free to contact us when you need our services. 【Overview】 ■ Tile thickness: 3mm to 6mm ■ Suitable for thin large tiles: 3,000mm + 1,500mm ■ Tensile failure load: over 1,500n (equivalent to 152kgf) *For more details, please download the PDF or feel free to contact us.

At Orion Ceramic Co., Ltd., we perform "hole-in-one processing" for fall prevention auxiliary fittings. It is suitable for ceramic tiles, stone, and bricks, with a tensile failure load of over 1,500 N. Please feel free to contact us when you need our services. 【Overview】 ■ Well-suited for ceramic tiles, stone, and bricks ■ Tensile failure load: over 1,500 N *For more details, please download the PDF or feel free to contact us.

We would like to introduce an example of the rivet method using large tile elastic adhesive and fall prevention auxiliary tools (rivets) in the case of stainless wire. According to the layout diagram, we will mark the layout from the reference line. If there are dimensional discrepancies with the tile layout or misalignments with the positions of windows and other fixtures, we will consult with the supervising engineer and make necessary corrections. Stainless wire and (plates) are used for mortar substrate treatment on concrete, ALC panels, extruded boards, etc. If there are large gaps in the tile substrate, stainless wire is more suitable. [Overview] ■ It is safer when supported with L-shaped brackets. ■ If there are irregularities in the structure, stainless wire offers better workability. *For more details, please download the PDF or feel free to contact us.

We would like to introduce the "Rivet Method," which is a fall prevention processing technique for large tiles. With the issuance of technical advice regarding the handling of exterior wall tiles bonded with organic adhesives that include fall prevention measures in the regular inspection reports of buildings, the Rivet Method is now treated the same as dry construction methods. *Documentation such as construction records is required. Additionally, our company also offers "Water Jet Processing." In recent years, tiles have been increasingly larger, and as a result, there has been a rise in cases where patterns and designs are added to tiles using water jet processing. We achieve highly designed tiles through water jet processing. 【Features】 ■ Rivet Method - It has become easier to use due to the issuance of technical advice. ■ Water Jet Processing - It is possible to add patterns and designs to tiles. *For more details, please download the PDF or feel free to contact us.