井上産業 List of Products and Services

We offer the '2-Motor Gearless Horizontal Vibrating Screen', which features a robust structure, excellent durability, and easy installation and relocation. Due to its gearless design, which eliminates the source of noise, it operates silently, similar to a single-axis inclined vibrating screen. Additionally, by extensively using reamer bolts and minimizing assembly errors to nearly zero, we have achieved exceptional durability that minimizes the likelihood of malfunctions even after long-term use. 【Features】 ■ Durability ■ Convenience and Quiet Operation ■ Cost Performance *For more details, please download the PDF or feel free to contact us.

• Other measuring instruments

We would like to introduce our "Tombstone (Mikage Stone) and Concrete Waste Dual-purpose Base Material Manufacturing System." There is ample space between the lower outlet of the jaw crusher and the conveyor belt, preventing accidents caused by the discharge of rebar that could damage the conveyor belt. The raw material inlet, drop point, and transfer points also have sufficient clearance, resulting in fewer issues such as spills and blockages, allowing the plant to operate efficiently and smoothly. 【Features】 ■ Prevention of conveyor belt damage accidents ■ Smooth operation of the plant ■ Easy relocation due to unitization of machinery ■ Can be installed in urban areas and demolition sites, capable of mass-producing high-quality base materials ■ Comprehensive noise and vibration countermeasures *For more details, please download the PDF or feel free to contact us.

• Collection and transportation

We would like to introduce our "Mixed Metal High-Efficiency Resource Recovery System." It consists of a total of four machines, including the quantitative feeder "FF-500W×3000L" and the water flow separator "AW-600." Please feel free to contact us if you have any inquiries. 【System Configuration】 ■ Quantitative Feeder "FF-500W×3000L" ■ Water Flow Separator "AW-600" ■ Aluminum Magnetic Separator "AB-600" ■ Stainless Steel Magnetic Separator "SB-600" *For more details, please download the PDF or feel free to contact us.

• Water treatment technology and systems

We would like to introduce our "High Efficiency Copper Wire Recovery System for Scrap Motors (Crushed Products)." When aluminum small pieces are fed into the aluminum magnetic separator, they are sorted to the "copper wire and plastic" side, and in the water flow separator, they are sorted to the "copper wire" side. If there is a high content of aluminum small pieces, an additional water flow separator can be installed, and by adjusting the water flow, when copper wire mixed with aluminum small pieces is fed in, the aluminum small pieces and copper wire are accurately sorted due to the difference in specific gravity. 【System Configuration】 ■ Volumetric feeder "FF-500W×3000L" ■ Suspended magnetic separator "HCP-600 type" ■ Aluminum magnetic separator "AB-600 type" ■ Water flow separator "AW-600 type" *For more details, please download the PDF or feel free to contact us.

• Water treatment technology and systems

We would like to introduce our "Business-grade Low-quality PET Bottle Sorting and Washing Equipment." It consists of various machines such as the quantitative supply machine "FF-500W×3000L," the suspended magnetic separator "HCP-600 model," and the aluminum magnetic separator "AB-600 model." Please feel free to contact us when you need our services. 【Equipment Configuration (Excerpt)】 ■ PET Bottle Processor Washer "IPP-400 model" ■ Water Flow Sorting Machine "AW-600 model" ■ High-speed PET Bottle Dehydrator "IHD-820φ×2300L model" ■ PET Bottle Fragment Separation Recovery Machine "PFC-300 model" ■ Label and Cap Separation Recovery Machine "QAS-750 model" ■ Crusher "SMC-900N" *For more details, please download the PDF or feel free to contact us.

• Water Treatment Plant

We would like to introduce our "Millefeuille Crushing and Separation Machine." By loosening and separating clumps of copper foil, aluminum foil, and resin films that are layered in dozens, the resource recovery process using a water flow density difference sorting machine can be carried out more smoothly. Please feel free to contact us when you need our services. 【Features】 ■ Energy-saving and space-saving ■ Specialized in crushing and separation functions ■ Compact structure ■ Can also be used for applications such as improving the quality of fine particles, including the separation of clay from sand *For more details, please download the PDF or feel free to contact us.

• Water treatment technology and systems

We would like to introduce our "Hand-Sorted Conveyor." It features a robust structure, excellent durability, low power consumption, space-saving design, and cost-effectiveness. We offer standard belt heights of 800 mm, belt widths of 600 to 1200 mm, and lengths ranging from 2 to 30 m. 【Product Lineup】 ■ MSC-600 ■ MSC-750 ■ MSC-900 ■ MSC-1200 *For more details, please download the PDF or feel free to contact us.

• Conveyor

The "magnet pulley" is a sorting machine for the collection of iron scraps. By providing the pulley diameter, length, shaft diameter, key groove dimensions, etc., custom designs are possible. Additionally, you can choose the magnetic force from 1000G, 2000G, or 3000G. Please feel free to contact us if you have any requests. 【Features】 ■ Custom design (provide pulley diameter, length, shaft diameter, key groove dimensions, etc.) ■ Crown processing available on the outer circumference of the magnet pulley ■ Magnetic force selectable (magnetic force: 1000G, 2000G, 3000G) *For more details, please download the PDF or feel free to contact us.

• Automatic Control Equipment

We handle the sorting machine "Trommel." The "CRSH-2060" is a horizontal type with a size of Φ2000mm × 6000mm. The mesh size and specification is Φ5 perforated mesh. In addition, we offer the inclined type "CRSI-1535" with upper tire drive, as well as the horizontal type "CRSH-1545" with a power of 5.5 kW. 【Features】 ■ Energy-saving and space-saving ■ Sturdy construction and excellent durability *For more details, please download the PDF or feel free to contact us.

• Automatic Control Equipment

Inoue Sangyo Co., Ltd. handles "water drainage sieves." Stainless steel wedge wire is typically used for draining sand in aggregate plants with a mesh opening of 0.8mm. We offer a lineup including the "WDSH-12/30 (1200W×3000L) horizontal type" and the "WDSI-4.5/12 (450W×1200L) inclined type." 【Features】 ■ Energy-saving and space-saving ■ Sturdy construction and excellent durability *For more details, please download the PDF or feel free to contact us.

• Water Treatment

Inoue Sangyo Co., Ltd. handles "Stainless Steel Magnetic Separator." It reliably captures and recovers fine stainless steel nails, syringes, etc., using a high-magnetic-force magnetic pulley. Additionally, it comes with an inverter for belt speed adjustment, allowing for processing volume adjustments. Please feel free to contact us when you need assistance. 【Features】 ■ Reliably captures and recovers fine stainless steel nails, syringes, etc., using a high-magnetic-force magnetic pulley. ■ Comes with an inverter for belt speed adjustment: allows for processing volume adjustments. * For more details, please download the PDF or feel free to contact us.

• Other resource recycling

Inoue Sangyo Co., Ltd. handles "Aluminum Magnetic Separator." The sorting partition can move up and down, as well as forward and backward, allowing for more precise sorting. It is equipped with an inverter for belt speed adjustment, enabling the adjustment of processing volume. We also undertake the design, manufacturing, and construction of input hoppers, feeders, belt conveyors, and discharge belt conveyors. 【Features】 ■ The sorting partition can move up and down, as well as forward and backward, allowing for more precise sorting. ■ Equipped with an inverter for belt speed adjustment: processing volume can be adjusted. *For more details, please download the PDF or feel free to contact us.

• Other resource recycling

The "SES-250" is a compact two-axis crusher characterized by energy efficiency and space-saving design. The drive motor is 11 kW, and the crushing chamber dimensions are 494×370 mm. The machine weighs approximately 1200 kg. Additionally, with its robust body structure and excellent durability, the frame features a split upper and lower structure, allowing for smooth maintenance work such as the replacement of consumables. [Features] - Energy-efficient and space-saving - Precision processing finish with thick steel plates - Frame with a split upper and lower structure *For more details, please refer to the PDF document or feel free to contact us.

• Rock drills, demolition machines, and excavators

We would like to introduce the "Primary Crusher / Grinding Machine Joint System" that we handle. By closing the switch valve to the hammer crusher, it is possible to collect the crushed material from the super crusher right before the hammer crusher. Additionally, the super crusher can change the product size from 80mm to under 10mm by replacing the bottom screen. 【Features】 ■ Product size can be changed by switching the damper or replacing the bottom screen ■ The switch valve can be easily opened and closed manually *For more details, please refer to the PDF document or feel free to contact us.

• Rock drills, demolition machines, and excavators

We would like to introduce our label and cap separation recovery machine, the "Quick Angle Sorter." Utilizing the differences in the shapes of labels and caps, it quickly and accurately separates and collects them. Being lightweight, it can be moved to a corner of the factory when not in use by attaching casters to four points. It is an energy-efficient and space-saving product. 【QAS-750 Standard Specifications】 ■ Main body belt width (mm): 750 ■ Input BC belt width (mm): 350 ■ Main body power (kW): 1.5 ■ Input BC power (kW): 1.0 *For more details, please refer to the PDF document or feel free to contact us.

• Other resource recycling

The "SGD-300" is a water flow-type specific gravity separation and recovery machine that utilizes buoyancy to perform sorting with low power consumption. When the circulating water decreases due to adhesion to items or evaporation, replenish it with well water or tap water. Additionally, there is the "SGD-200," which has a processing capacity of approximately 100 kg/h and a power of 1.6 kW. Please feel free to consult us when you need assistance. 【Features】 ■ Accurately sorts, separates, and recovers items with minimal specific gravity difference using water flow ■ When the circulating water decreases due to adhesion to items or evaporation, replenish it with well water or tap water ■ Sorting is performed using buoyancy and water flow, allowing for low power consumption ■ Simply input mixed items, and it automatically sorts accurately using specific gravity differences *For more details, please refer to the PDF document or feel free to contact us.

• Water treatment technology and systems

The "PFC-300" is a water flow-type machine designed to accurately separate and collect only "PET bottle fragments" from a mixture of PET bottle fragments, labels, and caps. When the circulating water decreases due to adhesion to items or evaporation, replenish it with well water or tap water. The sorting is performed using buoyancy and water flow, allowing for low power consumption during operation. Additionally, we also offer the "PFC-200" with a screw diameter of 200φ (mm). Please feel free to consult with us when you need it. 【Features】 ■ Utilizes the specific gravity difference between PET bottle fragments, caps, and labels to accurately separate and collect only PET bottle fragments using water flow. ■ Performs sorting using buoyancy and water flow, enabling operation with low power consumption. ■ Automatically and accurately separates and collects PET bottle fragments. *For more details, please refer to the PDF materials or feel free to contact us.

• Water treatment technology and systems

We would like to introduce our "Dry Label Peeler and Cap Remover." PET bottles are cut into 2 to 5 pieces almost simultaneously upon input. Even if there are contaminants inside the PET bottles, they are immediately discharged, and the labels and caps are collected at the same time. Additionally, the PET bottle bodies, labels, and caps are discharged from separate outlets, which eliminates the hassle of sorting. 【Features】 ■ PET bottles are cut into 2 to 5 pieces almost simultaneously upon input ■ Reduces the burden on the next process (crushing) ■ Label peeling and cap removal occur simultaneously ■ Since they are discharged from separate outlets, sorting is made easier *For more details, please refer to the PDF document or feel free to contact us.

• Other resource recycling

The "Pan Conveyor" is an automatic quantitative conveyor that can adjust the supply amount with a single touch, according to the processing capacity of equipment such as crushers and manual sorting lines. While the set quantity is automatically supplied to the equipment, the heavy machinery operator can perform other tasks, such as loading onto a dump truck. Additionally, it allows for the use of a wheel loader, and the hopper height has been kept to approximately 3mH. Please feel free to contact us when you need assistance. 【Features】 ■ Space-saving ■ Low power consumption ■ Supply amount can be adjusted with a single touch ■ Other tasks can be performed while the set quantity is automatically supplied to the equipment ■ Wheel loader compatible *For more details, please refer to the PDF document or feel free to contact us.

• Conveyor

The "Apron Conveyor" is an automatic volume transport device that adjusts to the processing capacity of equipment within the facility. It allows for one-touch adjustment of the supply amount according to the processing capacity of crushers, manual sorting lines, etc. (gate up and down & inverter control). With a single input volume of 5m³ or more (effective width 750W × 4000L), it automatically supplies the set quantity to the equipment, allowing heavy machinery operators to perform other tasks such as loading onto a dump truck. 【Features】 ■ One-touch adjustment of the supply amount is possible ■ Adjustable supply range: 1t/h to 100t/h ■ Compatible with wheel loader input: hopper height is kept at approximately 3mH *For more details, please refer to the PDF document or feel free to contact us.

• Material handling systems and equipment

The "Apron Feeder FF-750W×4000L" is an automatic supply device that provides the appropriate amount of material based on the processing capacity of the equipment within the facility. Depending on the processing capacity of the crushers and manual sorting lines within the facility, the supply amount can be adjusted with a single touch. While the set quantity is automatically supplied to the equipment, the heavy machinery operator can perform other tasks such as loading onto a dump truck. 【Features】 ■ Adjustable supply range: 1t/h to 100t/h ■ Single batch input of over 5m3 (Effective width 750W×4000L) ■ Compatible with wheel loader input ■ Hopper height is approximately 3mH *For more details, please refer to the PDF materials or feel free to contact us.

• Collection and transportation

We would like to introduce an example of sorting PET bottles using our water flow sorting machine "AW-600 type." In a mixture of PET bottles with labels and caps, the lightweight side consists of labels and caps, while the heavyweight side consists of PET bottles. In a mixture of PET bottles with glass bottles, steel pieces, and aluminum pieces, the lightweight side consists of PET bottles, while the heavyweight side is separated into glass bottles, steel pieces, and aluminum pieces. 【Overview】 ■ Mixture of PET bottles with labels and caps - Lightweight side: Labels & caps - Heavyweight side: PET bottles ■ Mixture of PET bottles with glass bottles, steel pieces, and aluminum pieces - Lightweight side: PET bottles - Heavyweight side: Glass bottles, steel pieces, aluminum pieces *For more details, please refer to the PDF document or feel free to contact us.

• Other resource recycling
• Dismantling equipment and parts

We would like to introduce an example of sorting car shredder products using our water flow separator "AW-600 model." For the lightweight side of car shredder products collected from scrap iron, they are sorted into sponge, hard plastics, rubber, sheet fragments, etc., while the heavyweight side is sorted into copper wire scraps, aluminum scraps, stainless steel scraps, etc. Additionally, for mixed products of rubber/plastics and stainless/aluminum, the lightweight side can be sorted into rubber/plastics, while the heavyweight side can be sorted into stainless/aluminum. [Overview (Partial)] ■ Mixed products of rubber/plastics and stainless/aluminum - Lightweight side: rubber/plastics, etc. - Heavyweight side: stainless/aluminum, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other resource recycling
• Dismantling equipment and parts

This document includes examples of sorting conducted using the multi-purpose water flow separator "AW-600 model." It presents the state of tires, metals, and rubble before being fed into the separator, along with photos showing the sorted states on the lightweight and heavyweight sides. This material will be useful as a reference when considering implementation, so please take a moment to read it. [Contents] ■ Sorting of a mixture of large tire fragments and iron lumps ■ Sorting of a mixture of rubble and iron/stainless steel *For more details, please refer to the PDF document or feel free to contact us.

• Other resource recycling

We would like to introduce our "Multi-Purpose Water Flow Sorting Machine." By adjusting the water flow, we can accurately sort lightweight items from each other and heavy items from each other, which were previously considered impossible to sort, contributing to the utilization and recycling of resources. If the sorting target is crushed PET bottles, it is possible to sort lightweight items such as labels and caps on the lightweight side and PET bottles on the heavy side with 90% accuracy using a gentle water flow. 【Product Lineup】 ■AW-400 ■AW-600 ■AW-900 ■AW-1200 ■AW-1600 *For more details, please refer to the PDF document or feel free to contact us.

• Other resource recycling

The "PET Bottle Processor Washer" is a maintenance-free product (operates 24 hours). It removes labels with the protrusions of the blades, impacts the caps to remove them, cuts the PET bottles, and cleans the inside. The blade material is Swedish steel, which is maintenance-free for a long period, and can be reinstalled in reverse for additional use. 【Features】 ■ PET bottles are cut into 2 to 5 pieces almost simultaneously upon input. ■ Even if there are cigarette butts, toothpicks, or waste inside, they are quickly washed away. ■ Labels and caps are collected simultaneously. ■ Cutting and dividing PET bottles reduces the load on the subsequent crushing machine. ■ Blade wear and power consumption are also reduced. *For more details, please refer to the PDF document or feel free to contact us.

• Other resource recycling

The "ITB-II type" is an easy-to-operate tire bead remover. It is powered by 3.7kw×1/143×2 units, with overall dimensions (mm) of 2240W×1760D×1480H. It is compatible with standard car tires for bead removal. Additionally, we also offer the "ITB-I type" for small car tires/light vehicles and the "ITB-III type" for SUV tires/4-ton truck tires. Please feel free to contact us if you need assistance. 【Features】 ■ Labor-saving and energy-efficient ■ Space-saving ■ High efficiency ■ Excellent durability ■ Easy operation *For more details, please refer to the PDF document or feel free to contact us.

• others

The "IHD-820φ×2300L model" is a high-speed dewatering machine capable of handling lightweight combustible materials. It is designed for labor-saving, energy-saving, and space-saving, with excellent durability and easy operation, efficiently and reliably dewatering moisture attached to lightweight combustible materials. Additionally, we also offer the "IHD-1100φ×2300L" with a tank inner diameter of 1100φ. Please feel free to contact us if you need assistance. 【Specifications】 ■ Tank inner diameter (mm): 820φ ■ Tank length (mm): 2300L ■ Rotor outer diameter (mm): 600φ ■ Rotational speed (rpm): 1000–1200 ■ Peripheral speed (m/min): 31–38 ■ Power (kw): 22 *For more details, please refer to the PDF document or feel free to contact us.

• Waste treatment facility
• Waste treatment facilities

We would like to introduce our high-speed dehydrator, the "IHD-820φ×2300L model." It quickly and reliably dehydrates moisture attached to PET bottles. It is highly durable, easy to operate, and is designed to save labor, energy, and space. Additionally, we also offer the "IHD-1100φ×2300L" with a power of 30kw, so please feel free to contact us if you need it. 【Specifications (excerpt)】 ■ Tank inner diameter (mm): 820φ ■ Tank length (mm): 2300L ■ Rotor outer diameter (mm): 600φ ■ Rotational speed (rpm): 1000–1200 ■ Power (kw): 22 *For more details, please refer to the PDF document or feel free to contact us.

• Waste treatment facility
• Waste treatment facilities

The "IHD-820φ×2300L model" that we handle is a high-speed dewatering machine suitable for plastics, wood, fibers, and paper products. It features easy operation and quickly and reliably dewaters moisture from lightweight combustible materials. It is designed to save labor, reduce power consumption, and occupy less space, while also being highly durable. Additionally, we also offer the "IHD-1100φ×2300L" with different specifications. Please feel free to contact us if you need assistance. 【Specifications (excerpt)】 ■ Tank inner diameter (mm): 820φ ■ Tank length (mm): 2300L ■ Rotor outer diameter (mm): 600φ ■ Rotational speed (rpm): 1000–1200 ■ Power (kw): 22 *For more details, please refer to the PDF document or feel free to contact us.

• Waste treatment facility

We would like to introduce our "Mixed Waste Sorting and Resource Recovery Equipment." The "Water Flow Sorter" allows sorting operations outdoors even in rainy weather. It provides a good working environment, does not require dust masks, and does not generate significant noise as it does not use blowers. We also recommend the extensive and effective use of the "Magnetic Sorter," which incurs no labor costs. Iron located above the transported materials is sorted using a suspended magnetic sorter, while iron that has slipped underneath is sorted using a magnetic pulley, employing the appropriate magnetic sorting equipment according to the purpose. 【Machines Used】 ■ Volumetric Feeder ■ Suspended Magnetic Sorter ■ Water Flow Sorter ■ High Magnetic Force Stainless Steel Sorting Recovery Machine ■ Aluminum Sorting Recovery Machine ■ Manual Sorting Conveyor *For more details, please refer to the PDF materials or feel free to contact us.

• Waste treatment facilities
• Other resource recycling

We would like to introduce the "Metal Resource Automatic Sorting and Recovery Equipment" handled by Inoue Sangyo. Equipped with a "Suspended Magnetic Separator" and "Magnet Pulley" capable of recovering iron scraps, as well as a "Non-Ferrous Metal Recovery Device" for recovering stainless steel and aluminum. Additionally, it also features a "Manual Sorting Conveyor" suitable for the recovery of valuable plastics. Please feel free to contact us when you need assistance. 【Machines Used】 ■ Iron Magnetic Separator ■ High Magnetic Force Stainless Steel Separator ■ Aluminum Magnetic Separator ■ Quantitative Feeder ■ Suspended Magnetic Separator ■ Manual Sorting Conveyor *For more details, please refer to the PDF materials or feel free to contact us.

• Waste treatment facilities
• Other resource recycling

We would like to introduce our powerful stirring and kneading machine, the 'Paddle Mixer.' It has a large processing capacity, allowing for the reliable stirring and kneading of input materials in a short time. A cover is installed on the top of the kneading chamber to prevent the scattering of materials such as lime powder. Additionally, it is compact and lightweight, making it possible to install in narrow spaces. It can be used for applications such as the humid mixing of crushed stone and mountain sand, as well as particle size adjustment of gravel and crushed stone. 【Features】 ■ Space-saving ■ Large processing capacity ■ Dust-proof cover included *For more details, please refer to the PDF document or feel free to contact us.

• others

Inoue Sangyo's "Non-Ferrous Magnetic Separator" is a magnetic separation machine that efficiently recovers non-ferrous components (such as stainless steel and aluminum). The "Eddy Current Rejection Type Magnetic Separator" can sort magnetic and non-magnetic materials based on their flight distance. Its eccentric magnet structure prevents the entrapment of iron pieces, ensuring the longevity of the drum shell and belt. It is particularly effective for recovering aluminum. The "High Magnetic Force Stainless Steel Recovery Magnetic Separator" reliably captures and recovers stainless steel mixed in non-magnetic materials. Both models contribute to the automation and labor-saving of the workplace. [Key Points for Choosing This Product] ■ Efficient and reliable recovery of non-ferrous components ■ Test machines are available, allowing for testing at any time! *For more details about the product, please refer to the "PDF Download" below.

• others

The "Metal Magnetic Separator" is a magnetic separation machine that efficiently recovers stainless steel. The "Eddy Current Rejection Type Magnetic Separator" can sort magnetic and non-magnetic materials based on their flight distance. Its eccentric magnet structure prevents the entrapment of iron pieces, ensuring the longevity of the drum shell and belt. The "High Magnetic Force Stainless Steel Recovery Magnetic Separator" reliably captures and recovers stainless steel mixed with non-magnetic materials. We have a test machine available, so testing can be conducted at any time. 【Features】 ■ Powerful mixed metal separation ■ Efficient and reliable metal recovery ■ Availability of test machines For more details about the "Metal Magnetic Separator," please download the PDF or feel free to contact us.

• others

The "Stainless Steel Recovery Magnetic Separator" is a magnetic separation machine that efficiently recovers stainless steel. The "Eddy Current Rejection Type Magnetic Separator" can sort magnetic and non-magnetic materials based on distance. Its eccentric magnet structure prevents the entrapment of iron pieces, ensuring the longevity of the drum shell and belt. The "High Magnetic Force Magnetic Separator for Stainless Steel Recovery" reliably captures and recovers stainless steel mixed with non-magnetic materials. We have a test machine available, so testing can be conducted at any time. 【Features】 ■ Powerful mixed metal separation ■ Efficient and reliable recovery of stainless steel ■ Availability of test machines *For more details on the "Stainless Steel Recovery Magnetic Separator," please download the PDF or feel free to contact us.

• others

The "NEW Super Trommel" is a revolutionary attachment that can handle a wide range of applications from sorting to grading and collection. It consists of a cylindrical container with a wire mesh outer wall, tilted at a slight angle to the horizontal and rotated to separate materials by size. With its widened scoop area, it can smoothly collect bulky items like waste plastics. Additionally, by extending the wire mesh to the rear wall, the screening area has been increased, enhancing processing capacity. The inclined rotation also eliminates spillage from the front. 【Features】 ■ Excellent mobility and versatility ■ Easy operation ■ Compatible with various sorting materials (simple wire mesh replacement) ■ Low vibration and low noise ■ High reliability and durability ■ Significant cost reduction *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Concrete Waste Recycling Plant" is a durable RC production line. High-quality RC under 40mm, with rebar removed, can be produced in large quantities on-site. It has a compact design compared to its processing capacity, allowing for quick installation at demolition sites. Additionally, there is ample space at the material inlet, discharge point, and transfer locations, resulting in fewer troubles caused by spills or blockages, enabling the plant to operate efficiently and smoothly. Furthermore, the ground hopper and grizzly feeder under the chute are equipped with rubber liners as standard, and vibration rubber is standard under the jaw crusher and screen frame. Comprehensive measures have been implemented at the source to address noise and vibration. 【Features】 ■ Prevention of conveyor belt cutting accidents ■ Smooth operation of the plant ■ Easy relocation due to unitized machinery ■ Capable of installation at demolition sites for mass production of high-quality RC ■ Comprehensive noise and vibration countermeasures *For more details, please refer to the PDF materials or feel free to contact us.

• Waste treatment facilities
• others

The equipment is a comprehensive sorting system that combines "Kataduke-kun" and "Integrated Wastewater Sorting Equipment." It boasts a sorting accuracy of over 95%. Additionally, due to the inclusion of a circulating water treatment system, the mixed waste sorting water circulates within the equipment and is not discharged outside. By efficiently recovering washed sand, the burden on the water treatment system is reduced, and the amount of dewatered sludge discharged is minimized. Furthermore, the adoption of a bifurcated chute allows for the installation of two manual sorting conveyor lines, effectively doubling the sorting processing capacity. 【Features】 ■ No issues with noise or dust ■ Sorting accuracy of over 95% (according to our tests) ■ Includes a circulating water treatment system ■ Controls the amount of dewatered sludge discharged ■ Doubles the sorting processing capacity *For more details, please refer to the PDF document or feel free to contact us.

• Waste treatment facilities

The "Kataduke-kun PT" is a portable manual sorting line. It can accommodate various sorting needs such as removing soil from demolition waste, sorting RC40 millimeters and under, pre-sorting for manual sorting lines, and oversized cuts by improvement workers. The operation is simple: "Press the operation button → Directly load with a hydraulic excavator → Produce sorted items." Additionally, by simply replacing the mesh, it is possible to change the under-size in a short time. Furthermore, the main body, chute, and conveyor are modularized, making it easy to move and set up. 【Features】 ■ Multi-purpose ■ Easy operation ■ Easy under-size changes ■ Simple setup on site ■ Quick moving and installation *For more details, please refer to the PDF materials or feel free to contact us.

• Waste treatment facilities

"Katazuke-kun A" is a hand sorting line equipped with an apron conveyor (volumetric feeder). The speed of the line can be freely controlled according to the sorting target and the experience level of the sorting workers. Designed with durability in mind, it features a simple structure that minimizes breakdowns, allowing for safe long-term use. The quantity and height of the sorting stockyard can be freely modified in design. 【Features】 ■ Line speed can be freely controlled ■ Simple structure with minimal breakdowns ■ Designed for durability, ensuring safe long-term use ■ Quantity and height of the sorting stockyard can be freely modified ■ An under-sorting device (trommel) can be set at the end of the apron conveyor (optional) *For more details, please refer to the PDF document or feel free to contact us.

• Waste treatment facilities

"Katazuke-kun" is a mixed waste resource recovery system that utilizes a manual sorting line. The supply feeder's feed rate and the manual sorting conveyor belt speed are controlled by an inverter, and two manual sorting conveyor lines are installed for each supply feeder. This significantly doubles the sorting processing capacity and greatly reduces the waiting time for heavy machinery operators during input tasks. Additionally, one-touch inspection windows are installed at key points, allowing for time savings during internal inspections and the removal of blockages in the chutes. Furthermore, soundproof and wear-resistant rubber is attached to the core chute and the inside of the hopper through which mixed waste passes, ensuring comprehensive noise and wear countermeasures. 【Features】 ■ Sorting processing capacity per line: 20–30m³/hour (dry sorting) ■ Inverter control ■ Y-shaped chute ■ One-touch inspection windows installed at key points ■ Comprehensive noise and wear countermeasures *For more details, please refer to the PDF document or feel free to contact us.

• Waste treatment facilities

The "Sand Separator" is a classification machine equipped with a dewatering screen. This product features a large classification pool. By adjusting the water level, it is possible to adjust the classification point between 150 and 200 mesh. Additionally, its excellent cleaning function allows for efficient washing and dewatering of fine sand, resulting in improved quality. The special dewatering screen with a step function enables efficient dewatering. The drive unit and all major components are located above the water surface, resulting in fewer malfunctions and excellent durability. Furthermore, the open top of the machine makes maintenance and inspection easy. 【Features】 ■ Significant improvement in classification efficiency ■ Enhanced dewatering and cleaning efficiency ■ Large processing capacity ■ Excellent durability and easy maintenance ■ Energy-saving *For more details, please refer to the PDF document or feel free to contact us.

• Waste treatment facilities
• others

Inoue Sangyo Co., Ltd., which engages in the equipment, design, manufacturing, and sales of industrial waste treatment machinery, offers high-efficiency washing machines. The "Drum Washer" is a high-efficiency washing machine suitable for the removal of clay attached to gravel and the removal of heavy metals attached to incineration residues. Additionally, the liner shape allows for the adjustment of retention time. 【Features】 ■ Excellent durability ■ Retention time can be adjusted due to the liner shape ■ Suitable for the removal of clay attached to gravel and heavy metals attached to incineration residues *For more details, please refer to the PDF document or feel free to contact us.

• Waste treatment facilities
• others

The "Spiral Classifier" efficiently overflows silt and collects washed sand. We offer a lineup including the "IS-450S" with dimensions φ450×4200L, the "IS-600S" with φ600×4500L, and the "IS-750S" with φ750×5500L. We handle both single and double type specifications, so please feel free to contact us when needed. 【Specifications of IS-600S (Standard Model) (Excerpt)】 ■ Type: Single row, two lines ■ Dimensions: φ600×4500L ■ Capacity: 12T/H (Apparent specific gravity 1.7) ■ Material processed: Sand ■ Pool area: Approximately 3m² *For more details, please refer to the PDF document or feel free to contact us.

• Waste treatment facilities
• others