ティスコ List of Products and Services

Would you like to use the IT introduction subsidy to implement a comprehensive support system for renovation work? You can select and combine the necessary software for your application. Individuals or corporations in the construction industry with a capital of 300 million yen or less and fewer than 300 full-time employees are eligible. Tisco will support your application process as a support provider. For more details, please feel free to contact us. 【Eligible Software for Subsidy】 ■ TRS Base Software - Base Repair Estimation Software ■ TRS Scaffold Software - External Scaffold Temporary Planning Software ■ TRS Quantity Software - Quantity Estimation Software ■ KR Software - Raster Editing and Correction Software *For more details, please refer to the PDF materials or feel free to contact us.

• Other Management Services

The "Picking and Calculation System" allows users to indicate parts of a drawing scanned by a scanner with a mouse, automatically reading and calculating the dimensions of those parts. By displaying the calculation formulas, results, serial numbers, and calculation trajectories alongside the drawings, the relationship between the drawings and the basis for calculations becomes clear. While performing the picking, a basis for quantities can be created simultaneously. This system achieves an operation feel that is just like manual picking. 【Examples of Picking Patterns】 ■ Picking of exterior walls, balcony walls, and beam-column types ■ Picking of exterior corridor long sheets and end seals ■ Picking of rooftop flat areas, uprisings, and coping ■ Picking of temporary scaffolding area ■ Subtraction of exterior wall openings and picking of fittings seals ■ Picking of seals around escape hatches ■ Detailed picking of exterior wall areas and fittings seals *For more details, please refer to the PDF or feel free to contact us.

• Other Management Services

The "Renovation Construction Comprehensive Support System" consists of a base repair estimation software, an external scaffolding construction planning software, and a quantity estimation software for painting, waterproofing areas, and seal lengths, which support the creation and aggregation of investigation diagrams for exterior wall deterioration, renovation completion documents after construction, and deterioration quantity. As an ancillary software, the raster editing software (KR for win) allows for easy noise removal, distortion correction, and core alignment correction of the obtained drawings. Although there are three different software programs, sharing the operating environment of the base TRSCAD reduces the learning period for each software. By tracing hand-drawn drawings on TRSCAD, even beginners can create drawings in just a few days, enabling office staff to be utilized as support personnel for technical staff. 【Three Different Software Programs】 ■ TRS Base... Base repair estimation software Supports the creation of deterioration diagnosis investigation diagrams, renovation completion documents, and quantity estimation of deterioration items. ■ TRS Scaffolding... External scaffolding temporary planning software Supports the creation of construction plans for presentations and the submission of commencement notifications to the Labor Standards Inspection Office. ■ TRS Quantity... Quantity estimation software Supports quantity takeoffs for large-scale repair work and long-term repair plans, as well as approximate quantity checks.

• Construction and process management software

The software components of "ADRAS" include the raster editing software "KR," the substrate repair estimation software "TRS Substrate," the quantity estimation software "TRA Picking," and the external scaffolding temporary planning diagram software "TRS Scaffolding." 【Features of the raster editing software "KR"】 - Easily corrects old blueprints and digital camera data. - Can be imported into CAD for tracing and CAD conversion, allowing CAD drawings to be created in one-third to one-fifth of the usual time. 【Features of the substrate repair estimation software "TRS Substrate"】 - The definitive tool for creating drawings for deterioration surveys of buildings and substrate quantity estimation before construction. - By simply inputting shapes such as cracks and bulges into CAD drawings or scanned drawings, it automatically generates quantity details and summary tables in Excel. 【Features of the quantity estimation software "TRA Picking"】 - A software that performs area, length, and location picking from scanned drawings. - Simplifies operations to the maximum extent, enabling quick mastery of the software. 【Features of the external scaffolding temporary planning diagram software "TRS Scaffolding"】 - Usable in all areas including sales proposal drawings, application drawings for the Labor Standards Inspection Office, and construction drawings along with external scaffolding temporary planning diagrams.

• addition
• Cost management and cost estimation software

Our company offers a comprehensive support system for renovation work on buildings and apartments called 'ADRAS,' which strongly backs up renovation projects. We provide a lineup of specialized software, including "TRS Picking," which focuses on quantity estimation for renovation work on architectural structures, as well as "TRS Scaffolding" for external scaffolding planning, "TRS Substrate" for substrate repair estimation, and "R Measure" for on-site support. The "TRS Series" (Substrate, Scaffolding, Picking) has a track record of 800 companies and has achieved 1,800 systems. [Features (TRS Picking)] - Specializes in quantity estimation for renovation work on architectural structures - Numerous delivery records with design offices and others - Provides an operation environment that feels like manual picking - Creation of estimation basis - Reduction and efficiency improvement of estimation man-hours *For more details, please refer to the PDF materials or feel free to contact us.

• Other Software
• Construction and process management software

"TRS Scaffold" is an external scaffolding temporary planning software that creates construction planning drawings for presentations and temporary planning drawings for construction start notifications. With the component layout simulation function, temporary floor plans can be created in a short time. Elevation drawings are automatically generated based on the specified areas in the floor plan. We have achieved the speed to propose construction plans along with estimates. 【Features】 ■ Scanner screen available ■ Floor component layout simulation function ■ Automatic elevation drawing function ■ Library of detailed drawings for applications ■ Component quantity estimation function *For more details, please refer to the PDF materials or feel free to contact us.

• Other Software
• Construction and process management software

"TRS Picking" is a quantity estimation software specialized for the quantity estimation of renovation works for architectural structures, including long-term repair plans and large-scale renovation construction design quantities. When you indicate a part of the drawing imported via a scanner with the mouse, it reads the dimensions of that part, performs calculations, and can display the picking name, calculation formula, serial number, and results on the drawing. While performing the picking, it simultaneously creates quantity bases, achieving an operation feel that is just like manual picking. 【Features】 ■ Provides an operation environment that feels like manual picking ■ Creation of estimation bases ■ Displays picking trajectories, calculation formulas, results, etc., on the drawing ■ Reduction of estimation man-hours ■ Numerous delivery achievements for management companies, painting and waterproofing contractors, and design offices! *For more details, please refer to the PDF materials or feel free to contact us.

• Other Software
• Cost management and cost estimation software

"TRS Substrate" is a substrate repair estimation software that creates repair drawings for substrate repair work and establishes quantity bases for actual cost estimation. By inputting the details of the repair work, repair drawings are generated, and quantity estimation is performed simultaneously. Quantity details and summary tables are output to Excel, and when changes, deletions, or additions are made in CAD, the serial numbers are automatically updated. It achieves 3 to 4 times the productivity compared to other CAD software. 【Features】 ■ A ready-to-use software that can be learned in a short period ■ All serial number replacements and aggregation tasks are automated, saving time ■ Significant reduction in labor hours for substrate repair item estimation ■ Establishes reliability as completion documentation for exterior wall renovation work *For more details, please refer to the PDF materials or feel free to contact us.

• Other Software
• Cost management and cost estimation software

The "Picking and Calculation System" allows users to specify parts of a drawing scanned by a scanner using a mouse, automatically reading and calculating the dimensions of those parts. By displaying the calculation formulas, results, serial numbers, and calculation trajectories on the drawing, the relationship between the drawing and the calculation basis becomes clear. While performing the picking, a quantity basis can be created simultaneously. This system achieves an operation feel that is just like manual picking. 【Examples of Picking Patterns】 ■ Picking of exterior walls, balcony walls, and beam-column types ■ Picking of exterior corridor long sheets and end seals ■ Picking of rooftop flat areas, risers, and coping ■ Picking of temporary scaffold area ■ Picking of exterior wall openings and door seals ■ Picking of seals around emergency hatches ■ Detailed picking of exterior wall area and door seals *For more details, please refer to the PDF or feel free to contact us.

• Other Management Services

The "Itemized Estimation System" allows you to specify parts on a drawing imported via a scanner using a mouse, automatically reading and calculating the dimensions of those parts. By displaying the calculation formulas, results, serial numbers, and calculation trajectories on the drawing, the relationship between the drawing and the calculation basis becomes clear! You can attach a calculation table to the itemized estimation drawing, making it easy to create quantity statements. While performing itemization, you can simultaneously create quantity bases. This system achieves an operation feel that is just like manual itemization. 【Features】 ■ Clarifies the basis for quantity estimation ■ Standardization of itemized estimation can be established ■ Time savings are possible ■ Disclosure of drawings and calculation bases is possible 【Applications】 ■ For long-term repair plans ■ For estimates ■ For execution budgets *For more details, please refer to the PDF below titled "Examples of Large-Scale Repair Work for Condominiums"! Feel free to contact us.

• Other Management Services

"TRS Picking" is software that creates quantity estimation bases for long-term repair plans, large-scale renovation painting, waterproofing areas, seal lengths, and more. When you trace the parts on the scanned drawings, it reads the dimensions and performs calculations. The picking trajectory remains on the drawing. It is also possible to list picking items, calculation formulas, serial numbers, and results together. The picking trajectory can have settings for color, line type, etc., for each item. While performing picking, you can simultaneously create quantity estimation bases, achieving an operation feel that is just like manual picking. 【Features】 ■ Multiple drawings such as floor plans, elevation views, fixture tables, and detailed drawings can be arranged on one screen. ■ Each scanned drawing can be set to full scale. ■ Multiple picking items (area, length) can be specified for one picking trajectory. ■ Picking serial numbers are updated with the addition or deletion of picking items. ■ Calculation details and summary tables can be output to Excel. *For more details, please refer to the PDF document or feel free to contact us.

• Other Software
• Cost management and cost estimation software

"TRS Scaffolding" is software that creates construction plans for sales proposals and temporary plan drawings for Labor Standards Inspection Office Form 88 on TRSCAD. The layout simulation function determines the arrangement of scaffolding materials and creates a floor plan. The elevation view is automatically generated based on the specified edges of the floor plan. Dimensions for material placement can be indicated at any position. Each component, such as beams and stairs, can be easily arranged by specifying the drawing location. Considering the slope and steps of the ground level, it provides an overwhelmingly fast drawing environment. 【Features】 ■ Plans can be created based on scanned drawings. ■ Modularizing functions allows for significant reduction in drawing time. ■ Combination of frame and single pipe is possible, and it supports pre-installed handrails. ■ Wedge-type connections are compatible with standard scaffolding. ■ It is possible to extract the quantity of materials (estimation). ■ Supports detailed drawing collections for Labor Standards Inspection Office applications (next-generation scaffolding support completed in December 2017). *For more details, please refer to the PDF materials or feel free to contact us.

• Other Software
• Architectural Design Software

"TRS Base" is software that creates deterioration diagrams and quantity estimates by inputting building deterioration and failure points into TRSCAD drawings, and outputs quantity details and summary tables to Excel. Drawing legends can be individually managed for each organization or client. It is possible to set colors, line types, and serial numbers for each deterioration item such as cracks, lifting, and missing parts, allowing for the creation of clear and aesthetically pleasing deterioration drawings. Changes, additions, and deletions of drawing data can be easily corrected with the automatic serial number function, which instantly updates the serial numbers on the drawings. The corrected details and summary data are then output to Excel. This feature significantly reduces the time required for correction tasks. 【Features】 ■ Scanned drawings can be utilized ■ Achieves diverse expressions with colors, line types, hatching, area fills, and symbols ■ Serial number encircled shapes, prefix and suffix characters, and quantity numbers can be listed in any combination ■ Automatically updates serial numbers when deterioration items are changed, added, or deleted ■ Allows for setting of increase/decrease rates in summary tables *For more details, please refer to the PDF materials or feel free to contact us.

• Other Software
• Cost management and cost estimation software

"KR for win" is software that edits and corrects distortions, warps, and noise in images inputted by a scanner. It allows for easy and speedy processing of distortions and noise in drawing data. By specifying the noise size, it removes noise below the specified size. It also enables easy correction of areas that have shrunk into valleys. Additionally, with the four-point correction feature, it can correct drawings that have been distorted into trapezoids or diamonds. 【Features】 ■ Correction functions: skew correction, distortion correction, core alignment correction, noise removal, etc. ■ Drawing functions: straight lines, rectangles, arcs, three-point circles, and text input, etc. ■ Editing functions: erasing within frames, erasing outside frames, erasing within polygon frames, erasing outside polygon frames. ■ Allows setting the scale of input drawings using user-defined coordinates. *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

The "Pick-Up Estimation System" is a software that supports the creation of quantity estimation bases linked to drawings for long-term repair plans and large-scale renovation construction design quantities. When you indicate a part on the drawing scanned with a scanner using the mouse, the dimensions of that part are read and calculated, and you can simultaneously display the pick-up name, calculation formula, serial number, and results on the drawing. You can create quantity bases while performing the pick-up. This system achieves an operation feel that is just like manual picking. 【Features】 ■ Clarifies quantity estimation bases ■ Establishes standardization of pick-up estimation ■ Enables time savings ■ Allows disclosure of drawings and calculation bases *For more details, please refer to the catalog or feel free to contact us.

• Other Management Services