北越融雪 List of Products and Services

We would like to introduce the "surrounding materials and accessories" from our range of exhaust pipes and related components for pellet stoves. Starting with heat-resistant aluminum tape (50m roll) "Aluminum Coating Tape," we also offer the very convenient "Touch Paint Spray" for cutting and installing exhaust pipes, as well as for maintenance repairs. In addition, we handle products such as "Stove Pipe Heat Guard," "Stove Floor Plate," and "Pellet Case." 【Product Lineup (Partial)】 ■ Aluminum Coating Tape ■ Touch Paint Spray ■ MC Glass Cleaner Clean 2000 ■ Stove Pipe Heat Guard ■ Stove Floor Plate *For more details, please refer to the PDF document or feel free to contact us.

• District heating and cooling/heat source system

We would like to introduce the "warm air duct components" from the range of exhaust pipes and related materials for pellet stoves that we handle. Starting with the stainless steel "reduced socket φ80F-φ60M," we also offer aluminum products, including the white-painted "aluminum die-cast straight pipe φ60." Additionally, we have other products available, such as the "warm air outlet," "grille outlet set with mesh," and "Y-shaped duct socket φ80." 【Product Lineup (Partial)】 ■ Reduced socket φ80F-φ60M ■ Aluminum die-cast straight pipe φ60 ■ Aluminum die-cast elbow pipe 90° φ60 ■ Aluminum die-cast male-to-male elbow pipe 90° φ60 ■ Aluminum die-cast elbow pipe 45° φ60 *For more details, please refer to the PDF document or feel free to contact us.

• District heating and cooling/heat source system

The "DISK E" is a pellet stove recommended for spaces that do not require a large heating capacity. To overcome issues such as incomplete combustion due to negative pressure indoors in high airtight homes, it is designed to draw 100% of the combustion air from the outside. The operation panel on the top of the unit allows for five levels of heat settings, room temperature settings, and timer settings. Additionally, while it is a shield model suitable for high airtight homes, it features an air curtain mechanism that extends the air intake to the inside of the glass, allowing for a long time of enjoying a clean flame. 【Features】 ■ Compact size at 83 cm tall ■ Uses vermiculite in the combustion chamber to enhance combustion efficiency ■ Efficiently outputs radiant heat ■ Warm air is blown out from the top *For more details, please refer to the PDF document or feel free to contact us.

• Stove

A "pellet stove" is a heating device that uses small cylindrical pellets called wood pellets, which are produced secondarily from thinned wood and sawdust from manufacturing plants. You can operate the power ON-OFF, heat setting, and room temperature setting all with just one finger. Powerful warm air quickly spreads throughout the room, and the radiant heat from the front of the unit gently warms the walls and ceiling, allowing the warmth to last longer. Please feel free to ask any questions you may have while considering installation. 【Features】 ■ Double effect of warm air and radiant heat ■ Wallet-friendly low fuel consumption ■ All pellets provided by our company are manufactured domestically ■ Usable by anyone from the day of installation ■ Different characteristics depending on the raw materials *For more details, please refer to the PDF document or feel free to contact us.

• Stove

It is recommended to conduct inspections of the snow melting equipment regularly every year, just like the vehicle inspection for cars. Whether it is a hot water (boiler) type or an electric (heater) type, we offer a reassuring pricing structure. We will provide a thorough explanation of the details, present the price list, and respond with care. If you notice issues such as "antifreeze is leaking," "fuel is leaking," or "smoke is coming from the boiler," please consult us as soon as possible. 【Basic Inspection Contents (Excerpt)】 ■ Visual inspection of the machinery room and equipment ■ Test operation and condition check of the heat source unit ■ Test operation and condition check of the entire system (pressure adjustment) ■ Checking the concentration and amount of antifreeze ■ Checking for leaks from headers and piping *For more details, please refer to the PDF document or feel free to contact us.

• Snow melting equipment

The "Stûv P-10" is a unique and practical pellet stove born in Belgium. It is designed to be installed in high airtight houses with an output of 2.5 to 8 kW and a high combustion efficiency of over 90%. With radiant heating that does not involve warm air, it achieves very quiet operation by adopting a bottom-loading pellet fuel system. The upper part of the body can rotate 45° to the left and right, allowing for a change in heating direction according to the usage scene. 【Features】 ■ Rotating head that allows the upper part of the body to be turned to change the heating direction ■ Easy supply through the loading hatch provided at the lower part of the body ■ Standard equipped with a display remote control *For more details, please refer to the PDF document or feel free to contact us.

• Wood stove

This document includes a list of our pellet stove sales agents. We have organized the company names, addresses, telephone numbers, and fax numbers by prefecture. A pellet stove is a heating device that uses small cylindrical pellets made from wood as fuel. [Contents] ■ Prefecture ■ Company Name ■ Address ■ TEL ■ FAX *For more details, please refer to the PDF document or feel free to contact us.

• Stove

Wood pellets are small cylindrical particles that are primarily processed from wood into chips for fuel use, with adjustments made for moisture content and then compressed and solidified. When pellets burn, the combustible materials are not the entire wood but rather the lignin (wood substance) and cellulose (fiber) contained within. Even though pellets may appear similar, the content of combustible materials varies, which affects the heat output. 【Features】 - Generally, a diameter of 6mm for stove use and 8mm for boiler use - Lignin naturally solidifies like wax during the cooling process - Essentially free from additives such as binders - Formed through processes including grinding, drying, and moisture content adjustment in a pelletizer - Stable in both quality and distribution *For more details, please refer to the PDF document or feel free to contact us.

• Stove

In the world of stoves, it is not an exaggeration to say that "the exhaust pipe (chimney) is the combustion device" as it is an extremely important presence. The primary purpose of the exhaust pipe is the "draft effect." Generally speaking, the longer the chimney, the higher the exhaust speed, resulting in smoother emissions. As the exhaust speed increases, air is drawn out from the combustion chamber, causing a drop in air pressure, which in turn increases the intake of air (the amount of air needed for combustion). This allows new oxygen to be supplied continuously, thereby increasing the combustion speed. 【Features】 ■ Reduction of environmental pollutants and energy saving ■ Mechanically assisted exhaust by a built-in exhaust fan in the main unit is fundamental ■ Indoor or outdoor installation (preferably over 2m) is recommended ■ Use in STANDBY mode is recommended ■ Handling of exhaust pipes from Italian company MC *For more details, please refer to the PDF document or feel free to contact us.

• Stove

When using a pellet stove, it is necessary to remove ash from the pot at least once a day for maintenance. Domestic pellet stoves are equipped with a drawer-type ash tray that catches scattered ash, and it can also be cleaned with a brush; however, having a vacuum cleaner (dust collector) is convenient. Therefore, we recommend the "Cenetop," a vacuum cleaner for ash developed by the Italian company Ribimex, designed for wood stoves and pellet stoves. 【Cenetop Features】 - Two-layer filter structure to catch ash - Convenient ash drop function - Standard brush nozzle to make cleaning glass and the combustion chamber easier - 18L large capacity tank made of non-combustible material (steel) - Both the suction nozzle and flexible hose are made of metal *For more details, please refer to the PDF document or feel free to contact us.

• Stove

It is recommended to remove the combustion ash and soot that accumulate in the exhaust pipe and heat exchanger of the pellet stove about once a year. As long as you understand the procedure, it is a task that can be carried out with simple tools and cleaning equipment. However, in some cases, the position of the exhaust pipe may be high, which can make some customers uneasy about working at heights. Therefore, we offer a paid service to assist with stove cleaning. 【Cleaning Menu】 ■ J Course ■ J+ Course ■ E Course ■ F Course *For more details, please refer to the PDF document or feel free to contact us.

• Stove

During the operation of the pellet stove, exhaust exceeding 200°C continuously flows through the exhaust pipe, reaching surface temperatures of around 90 to 100°C, posing a risk of burns upon contact. By installing the "Pipe Heat Guard," you can prevent accidents caused by contact with the high-temperature exhaust pipe and enhance the aesthetic appeal of the exhaust pipe. Additionally, we offer products such as the "Stove Guard Screen" to prevent accidents caused by contact with the high-temperature stove door area. 【Product Lineup】 ■ Pipe Heat Guard ■ Stove Guard Screen ■ Stove Fence ■ Stove Glass Cleaner ■ Exhaust Pipe Cleaning Brush ■ Stove Cleaning Brush *For more details, please refer to the PDF document or feel free to contact us.

• Stove

The "6.5kW MYA" is a stove manufactured by Edilkamin that uses eco-friendly and economical fuel made from compressed wood sawdust, known as "pellets." Since it is fully automated from ignition to extinguishing and fuel loading, it is easy to handle for anyone, including women and the elderly, allowing you to enjoy an indescribable sense of high-quality satisfaction of "living while watching the flames" from the very day it is installed. This product features an exterior made of heat-resistant tempered glass that is stunningly beautiful. Its gentle, streamlined form is a luxurious work of art, and it boasts a door glass that is resistant to clouding. [Features] - Fully automated from ignition to extinguishing and fuel loading - Easy to handle for anyone, including women and the elderly - The heat-resistant tempered glass exterior is stunningly beautiful - The gentle, streamlined form is a luxurious work of art - Door glass that is resistant to clouding *For more details, please refer to the PDF materials or feel free to contact us.

• Wood stove

The "8kW ANIA" is a stove manufactured by Edilkamin that uses eco-friendly and economical fuel made from compressed wood sawdust, known as "pellets." This product is designed for high airtightness homes. The combustion air is 100% supplied from the outside, eliminating incomplete combustion issues caused by the negative pressure of the air in high airtightness homes, and ensuring consistently stable optimal combustion. It features a cast iron combustion chamber with excellent heat resistance, a double combustion chamber door with complete sealing, and a beautiful heat-resistant glass exterior that evokes a sense of modern Italian art. 【Features】 ■ Designed for high airtightness homes ■ Combustion air is 100% supplied from the outside ■ Eliminates incomplete combustion issues caused by the negative pressure of the air in high airtightness homes ■ Ensures consistently stable optimal combustion ■ Cast iron combustion chamber with excellent heat resistance, double combustion chamber door with complete sealing ■ Beautiful heat-resistant glass exterior that evokes a sense of modern Italian art *For more details, please refer to the PDF document or feel free to contact us.

• Wood stove

The "KIKKA 8kW/KIKKA PLUS 8kW" is a stove manufactured by Edilkamin and handled by Hokuetsu Yusetsu Co., Ltd. The stylish and sleek normal stove "KIKKA 8kW" features a large glass door and a black steel exterior, presenting a clean and simple design. The exhaust pipe outlet can be selected from the rear, top, or left side. Additionally, the warm air duct heating pellet stove "KIKKA PLUS 8kW" is a new model that adds duct heating functionality. By piping ducts from the rear warm air outlet (Φ80), it is possible to send warm air to another room. 【Features (KIKKA 8kW)】 ■ Clean and simple design with a large glass door and black steel exterior ■ Exhaust pipe outlet can be selected from the rear, top, or left side ■ Control panel is located at the rear of the top plate (remote control is optional) ■ Combustion chamber is made of a durable combination of cast iron and steel plate ■ Three levels of heat settings, various program timers, and room temperature control functions included *For more details, please refer to the PDF document or feel free to contact us.

• Wood stove