クリオン List of Products and Services

The "Crion Prime Wall" is a dry-type composite wall for installing tiles using the EX panel developed by Crion and the "New Starl Net V-type Method (Hiro Corporation: Crion specifications)." By screwing tile weight-bearing brackets into the embedded plates within the panels, it demonstrates strong wall retention capabilities and improves seismic safety. Additionally, tiles can span the vertical joints between Crion EX panels, allowing for a continuous tile wall surface. 【Features】 ■ Treated as a one-hour fire-resistant exterior wall (Ministry of Construction Notification No. 1399 of 2000) ■ High connection strength between Crion EX panels and the substrate brackets for tile installation ensures improved seismic safety for dry tile installation specifications ■ Does not interfere with the locking mechanism of Crion EX panels (no abnormalities up to interlayer deformation angle ±1/50 rad) ■ Fully dry construction contributes to speed and shortened construction periods *For more details, please download the PDF or feel free to contact us.

• Other wall materials

At the "Custom Workshop," we showcase sample designs for free-form patterns. We can manufacture custom orders starting from a single panel of "one-of-a-kind" or "exclusive" items. To bring your unique design ideas to life in ALC, our concierge is here to assist you with any inquiries. Please feel free to contact us. 【Features】 ■ Responding to your original and unique requests ■ Custom manufacturing available starting from a single panel of "one-of-a-kind" or "exclusive" items ■ Dedicated concierges at the Custom Workshop to assist with your inquiries *For more details, please refer to the related link page or feel free to contact us.

• ALC

The "BS Corner Panel" is a factory-embedded anchor panel with an L-shaped cross-section designed for the corner areas of handrails on balconies and similar structures in low to mid-rise buildings with a height of 31m or less. The target wind pressure is 3,300N/m² or less for both positive and negative wind pressures. When used in conjunction with the "BS Panel," it ensures that reinforcing steel materials are not exposed on the inside of the balcony upon panel installation completion, enhancing aesthetic appeal while neatly finishing the corner areas and beautifully completing the building's exterior. 【Features】 ■ Suitable for balconies ■ Target wind pressure: ±3,000 or less ■ Neatly finishes corner areas (when used with BS Panel) ■ Beautifies the building's exterior *For more details, please refer to the PDF document or feel free to contact us.

• ALC
• panel
• Concrete block, ALC panel, extrusion molded cement board construction

The "DS Corner Panel" is a factory-embedded anchor panel with an L-shaped cross-section designed for the exterior corner sections of low to mid-rise buildings with a height of 31m or less. The target wind pressure is a positive wind pressure of 2,400 N/m² or less and a negative wind pressure of 1,600 N/m² or less. When used in conjunction with the "DS Panel," it allows for a neat finish at the corner sections, enhancing the building's exterior appearance. 【Features】 ■ Suitable for low to mid-rise buildings ■ Neatly finishes corner sections (also used with DS Panels) ■ Beautifies the building's exterior *For more details, please refer to the PDF materials or feel free to contact us.

• ALC
• panel
• Concrete block, ALC panel, extrusion molded cement board construction

The "BS Panel" is a factory-embedded anchor panel designed for balcony handrail walls of mid-rise buildings with a height of 31m or less. The target wind pressure is ±3,300N/m² or less, and since the reinforcing steel is not exposed on the inside of the balcony, it excels in aesthetics and also provides a smart finish for waterproofing and other installations. 【Features】 ■ Suitable for balconies ■ Target wind pressure: ±3,300N/m² or less ■ No exposed reinforcing steel on the inside of the balcony ■ Excellent aesthetics ■ Smart finish for waterproofing and other installations *For more details, please refer to the PDF materials or feel free to contact us.

• ALC
• panel
• Concrete block, ALC panel, extrusion molded cement board construction

The "Bay Window System Panel" is a factory-embedded anchor panel limited to a thickness of 100mm, targeting bay windows primarily in RC (reinforced concrete) residential buildings, ranging from low to high-rise structures. The applicable wind pressure is below ±6,000N/m2, and it consists of a top panel and side wall panels. Since no reinforcing steel is required for the panels or fixtures, it allows for a simple and clean wall composition. 【Features】 ■ Compatible with bay windows ■ Applicable wind pressure: below ±6,000N/m2 ■ Composed of top panel and side wall panels ■ No reinforcing steel required for panels or fixtures ■ Allows for a simple and clean wall composition *For more details, please refer to the PDF document or feel free to contact us.

• ALC
• panel
• Concrete block, ALC panel, extrusion molded cement board construction

The "SL Panel" is a factory-embedded anchor panel limited to a thickness of 100mm, designed for the exterior walls of buildings ranging from low to super high-rise structures. The target wind pressure is below ±4,000N/m², and drilling for equipment openings can be done extensively, excluding the perimeter of the panel, allowing for concentrated equipment openings. It is mainly used for the exterior walls of vertical wall rocking construction (CDR method), super high-rise rocking construction (Kryon Hyper Power Wall), and horizontal wall anchor construction. 【Features】 ■ Drilling compatible ■ Target wind pressure: ±4,000N/m² or less ■ Extensive drilling for equipment openings is possible, excluding the perimeter of the panel ■ Accommodates concentrated equipment openings *For more details, please refer to the PDF document or feel free to contact us.

• ALC
• panel
• Concrete block, ALC panel, extrusion molded cement board construction

The "Invisipanel" is a factory-embedded anchor panel limited to a thickness of 100mm, designed primarily for balcony fire separation walls and bay window system panels in mid-rise to high-rise buildings, such as RC (reinforced concrete) residential buildings. The target wind pressure is below ±4,000N/m², and upon completion of panel installation, the hardware at the top and bottom of the panel is not exposed, significantly enhancing aesthetic appearance. This product is mainly used in locking-type exterior walls. 【Features】 ■ Hardware-free design ■ Target wind pressure: below ±4,000N/m² ■ No exposed hardware, improving aesthetics ■ Adopted in locking-type exterior walls *For more details, please refer to the PDF document or feel free to contact us.

• ALC
• panel
• Concrete block, ALC panel, extrusion molded cement board construction

The "SG Panel" is a factory-embedded anchor panel designed for the exterior walls and partition walls of buildings to which the Warehouse Industry Law applies, such as large logistics warehouses with a height of 31 meters or less. It has a strength that can withstand the 2,500 N/m² specified by the Warehouse Industry Law, minimizing the potential for damage such as panel detachment in the event of an impact, such as a collapse. It is mainly used for the exterior walls and partition walls of vertical wall locking construction methods (CDR method) and horizontal wall anchor construction methods. 【Features】 ■ Compliant with the Warehouse Industry Law ■ Strength that can withstand 2,500 N/m² ■ Minimizes the potential for damage such as panel detachment ■ Adopted for the exterior walls and partition walls of vertical wall locking construction methods (CDR method) and horizontal wall anchor construction methods *For more details, please refer to the PDF materials or feel free to contact us.

• ALC
• panel
• Concrete block, ALC panel, extrusion molded cement board construction

The "DDD Panel" is a factory-embedded anchor panel designed for the exterior walls of high-rise and super high-rise buildings exceeding 31 meters in height. The target wind pressure is ±6,000 N/m² or less, and the panel width ranges from 600 to 300 mm in 10 mm increments. It is mainly used for the exterior walls and partition walls in vertical wall rocking construction (CDR method), super high-rise rocking construction (Kryon Hyper Power Wall), and horizontal wall anchor construction. 【Features】 ■ Suitable for high-rise buildings ■ Designed for exterior walls of high-rise and super high-rise buildings exceeding 31 meters in height ■ Target wind pressure: ±6,000 N/m² or less *For more details, please refer to the PDF materials or feel free to contact us.

• ALC
• panel
• Concrete block, ALC panel, extrusion molded cement board construction

The "DS Panel" is a factory-embedded anchor panel limited to a thickness of 100mm, designed for the exterior walls of low to mid-rise buildings with a height of 31m or less. The applicable wind pressure is below +2,400N/m2 and below -1,600N/m2, covering a range previously served by conventional PA (post-installed anchor) panels. It is mainly used for exterior walls and partition walls in vertical wall rocking construction (CDR method) and horizontal wall anchor construction. 【Features】 ■ Suitable for low to mid-rise buildings ■ Limited to a thickness of 100mm ■ Applicable wind pressure: below +2,400N/m2 and below -1,600N/m2 ■ Can also be used as partition walls *For more details, please refer to the PDF materials or feel free to contact us.

• ALC
• panel
• Concrete block, ALC panel, extrusion molded cement board construction

The factory pre-coating treatment panel "Seguente Base" achieves a "smoothness of the panel surface" that overturns the common understanding of ALC through advanced pre-coating treatment applied in the factory. This enables architectural expressions with excellent design that were difficult to achieve with conventional ALC. Additionally, the factory pre-coated surface has excellent adhesion, enhancing the performance of the topcoat paint. ■ Unprecedentedly smooth panel surface ■ Edges that create a cool appearance ■ Reduction of on-site painting processes allows for shorter delivery times, etc. *For more details, please download the PDF or contact us.

• Exterior coating materials
• paint

The unpleasant sounds echoing from the upper floor, like "thud, bang..." are often cited as a factor that disrupts comfortable living. One effective solution to this significant concern for wooden houses is the "Yuka Taisho" ALC panel for floor underlayment from Kurion. The wooden floor structure using "Yuka Taisho" is specified by the Japan Housing Finance Agency, allowing for the creation of a comfortable indoor space with excellent fire resistance, thermal insulation, and soundproofing. 【Features】 Reduces impact noise Designated as a material by the Japan Housing Finance Agency Easy to install with a dry construction method, etc. *For more details, please refer to the PDF document or feel free to contact us.

• ALC
• panel
• Concrete block, ALC panel, extrusion molded cement board construction

The anchor section for attaching panels to the structural framework can be considered the heart of ensuring the seismic safety of ALC panels. The key component is the anchor hardware. The anchor hardware is firmly welded and fixed to the reinforcing bars (rebar) inside the panel during the panel manufacturing stage, resulting in what is known as a "factory-embedded anchor panel." 【Features】 Seismic safety Improved construction efficiency Effective in reducing tsunami wave forces, etc. *For more details, please refer to the PDF materials or feel free to contact us.

• ALC
• panel
• Concrete block, ALC panel, extrusion molded cement board construction

Recognized for its outstanding performance in meeting the demands of construction materials, it is widely used in various fields of architecture and has a wealth of achievements. We present example photos of construction for different building purposes, including homes, stores, and offices. 【Features】 ■ Excellent fire resistance, protecting buildings from fire ■ High durability with stable quality ■ Provides a comfortable and energy-efficient space *For more details, please contact us or download the PDF.

• ALC
• Soil improvement material
• Concrete block, ALC panel, extrusion molded cement board construction

This is a thick panel of quality and trust, widely used in the upper levels of the Tokyo Skytree. It continues to be chosen for its proven track record and reliability as an excellent building material, applicable to a range of uses and scales from residential homes to skyscrapers. Additionally, we offer a rich variety of fashionable panels, and our customizable original designs support the creation of walls with a focus on aesthetics. 【Features】 ■ Ensures a safe living space (fire resistance) ■ Provides a peaceful living environment (sound insulation) ■ Creates a comfortable and energy-efficient space (thermal insulation) ■ Offers high reliability with stable quality (durability) and more. *This catalog is a digest version. *For more details, please contact us or download the PDF.

• ALC
• Soil improvement material
• Concrete block, ALC panel, extrusion molded cement board construction

"Crion Light" is a JIS product commonly referred to as "thin ALC panel," which is a lightweight aerated concrete panel manufactured in a factory using an autoclave (high-temperature, high-pressure steam curing chamber). It possesses high performance and design qualities. It has been recognized for its numerous excellent properties that meet the demands of construction materials, widely used across various fields of architecture, and has a significant track record. This product does not contain harmful substances such as asbestos or formaldehyde, making it suitable for creating healthy, safe, beautiful, and comfortable architectural spaces that meet modern requirements. We provide examples of construction photos for various building uses, including homes, stores, and offices. 【Features】 ■ Excellent fire resistance, protecting buildings from fire ■ High durability with stable quality ■ Provides a comfortable and energy-efficient space *For more details, please refer to the PDF materials or feel free to contact us.

• ALC
• panel
• Concrete block, ALC panel, extrusion molded cement board construction

This document is a product catalog featuring the sound-absorbing material "Shizukalite," which is a key solution for protecting living environments from the flood of various sounds. This product is composed of over 80% fine continuous bubbles and has high sound-absorbing performance equivalent to that of fiber-based sound-absorbing materials. Additionally, it excels in sound insulation, durability, and weather resistance. The Shizukalite products "Shizukalite Board" and "Shaonkyu Flex" are actively used in various applications as materials that create quiet, comfortable, and safe towns and cities, accumulating achievements and positive feedback. The catalog includes examples of installation, features and benefits, product specifications, shapes, and more. [Contents (excerpt)] ■ What is Shizukalite? ■ Shizukalite in action: case studies ■ Shizukalite Board ■ Shaonkyu Flex ■ Installation and maintenance, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Concrete wall
• board
• Soundproofing panels

Kryon Ace Board is generally referred to as "ALC thin panel," a JIS product with a thickness of 35mm, manufactured under strict quality control at ISO-certified factories. Kryon Ace Board is a multifunctional building material that meets various demands required for today's wooden houses, serving as exterior wall materials and subfloor materials for high-end wooden houses, while being trusted for its high quality, advanced technology, and numerous excellent characteristics, as well as its superior workability and design. 【Features】 - Excellent fire resistance, protecting buildings from fire - High durability with stable quality - Provides a comfortable and energy-efficient space, among others *The catalog is a digest version. *For more details, please refer to the PDF materials or feel free to contact us.

• ALC
• panel
• Concrete block, ALC panel, extrusion molded cement board construction

This is the catalog for "Segmente Base," which has made possible the "smoothness of panel surfaces" that overturns conventional ALC common sense. It introduces examples of construction, features and benefits, product specifications, and more. Thanks to our unique substrate coating treatment technology, it is possible to create a sharp and stylish wall surface that enhances the building's exterior appearance. [Contents] ■ Features and benefits of Segmente Base ■ Product specifications ■ Adhesion strength test results ■ Types of topcoats for multilayer coating E ■ Standards & construction-related information *For more details, please contact us or download the catalog.

• Exterior coating materials
• paint

This is a catalog filled with images showcasing the originality of ALC Crion's "Crion Original Fashion Panels." The "Crion Fashion Panels" feature a smooth surface on which a computer-controlled processing machine creates a variety of patterns, from straight lines to curves. This processing control can be individually programmed to meet customer needs, enabling the creation of original designs for ALC panels. [Contents] ■ Examples of installations for wall surfaces, store names, company logos, etc. ■ Proposals for wall surface designs ■ Proposals for groove shapes ■ How to create original fashion ■ Important notes *For more details, please request materials or view the PDF data available for download.

• ALC
• Concrete block, ALC panel, extrusion molded cement board construction