クリオン List of Products and Services

The "DS Panel" is a factory-embedded anchor panel limited to a thickness of 100mm, designed for the exterior walls of low to mid-rise buildings with a height of 31m or less. The applicable wind pressure is below +2,400N/m2 and below -1,600N/m2, covering a range previously served by conventional PA (post-installed anchor) panels. It is mainly used for exterior walls and partition walls in vertical wall rocking construction (CDR method) and horizontal wall anchor construction. 【Features】 ■ Suitable for low to mid-rise buildings ■ Limited to a thickness of 100mm ■ Applicable wind pressure: below +2,400N/m2 and below -1,600N/m2 ■ Can also be used as partition walls *For more details, please refer to the PDF materials or feel free to contact us.

The "DDD Panel" is a factory-embedded anchor panel designed for the exterior walls of high-rise and super high-rise buildings exceeding 31 meters in height. The target wind pressure is ±6,000 N/m² or less, and the panel width ranges from 600 to 300 mm in 10 mm increments. It is mainly used for the exterior walls and partition walls in vertical wall rocking construction (CDR method), super high-rise rocking construction (Kryon Hyper Power Wall), and horizontal wall anchor construction. 【Features】 ■ Suitable for high-rise buildings ■ Designed for exterior walls of high-rise and super high-rise buildings exceeding 31 meters in height ■ Target wind pressure: ±6,000 N/m² or less *For more details, please refer to the PDF materials or feel free to contact us.

The "SG Panel" is a factory-embedded anchor panel designed for the exterior walls and partition walls of buildings to which the Warehouse Industry Law applies, such as large logistics warehouses with a height of 31 meters or less. It has a strength that can withstand the 2,500 N/m² specified by the Warehouse Industry Law, minimizing the potential for damage such as panel detachment in the event of an impact, such as a collapse. It is mainly used for the exterior walls and partition walls of vertical wall locking construction methods (CDR method) and horizontal wall anchor construction methods. 【Features】 ■ Compliant with the Warehouse Industry Law ■ Strength that can withstand 2,500 N/m² ■ Minimizes the potential for damage such as panel detachment ■ Adopted for the exterior walls and partition walls of vertical wall locking construction methods (CDR method) and horizontal wall anchor construction methods *For more details, please refer to the PDF materials or feel free to contact us.

The "Invisipanel" is a factory-embedded anchor panel limited to a thickness of 100mm, designed primarily for balcony fire separation walls and bay window system panels in mid-rise to high-rise buildings, such as RC (reinforced concrete) residential buildings. The target wind pressure is below ±4,000N/m², and upon completion of panel installation, the hardware at the top and bottom of the panel is not exposed, significantly enhancing aesthetic appearance. This product is mainly used in locking-type exterior walls. 【Features】 ■ Hardware-free design ■ Target wind pressure: below ±4,000N/m² ■ No exposed hardware, improving aesthetics ■ Adopted in locking-type exterior walls *For more details, please refer to the PDF document or feel free to contact us.

The "SL Panel" is a factory-embedded anchor panel limited to a thickness of 100mm, designed for the exterior walls of buildings ranging from low to super high-rise structures. The target wind pressure is below ±4,000N/m², and drilling for equipment openings can be done extensively, excluding the perimeter of the panel, allowing for concentrated equipment openings. It is mainly used for the exterior walls of vertical wall rocking construction (CDR method), super high-rise rocking construction (Kryon Hyper Power Wall), and horizontal wall anchor construction. 【Features】 ■ Drilling compatible ■ Target wind pressure: ±4,000N/m² or less ■ Extensive drilling for equipment openings is possible, excluding the perimeter of the panel ■ Accommodates concentrated equipment openings *For more details, please refer to the PDF document or feel free to contact us.

The "Bay Window System Panel" is a factory-embedded anchor panel limited to a thickness of 100mm, targeting bay windows primarily in RC (reinforced concrete) residential buildings, ranging from low to high-rise structures. The applicable wind pressure is below ±6,000N/m2, and it consists of a top panel and side wall panels. Since no reinforcing steel is required for the panels or fixtures, it allows for a simple and clean wall composition. 【Features】 ■ Compatible with bay windows ■ Applicable wind pressure: below ±6,000N/m2 ■ Composed of top panel and side wall panels ■ No reinforcing steel required for panels or fixtures ■ Allows for a simple and clean wall composition *For more details, please refer to the PDF document or feel free to contact us.

The "BS Panel" is a factory-embedded anchor panel designed for balcony handrail walls of mid-rise buildings with a height of 31m or less. The target wind pressure is ±3,300N/m² or less, and since the reinforcing steel is not exposed on the inside of the balcony, it excels in aesthetics and also provides a smart finish for waterproofing and other installations. 【Features】 ■ Suitable for balconies ■ Target wind pressure: ±3,300N/m² or less ■ No exposed reinforcing steel on the inside of the balcony ■ Excellent aesthetics ■ Smart finish for waterproofing and other installations *For more details, please refer to the PDF materials or feel free to contact us.

The "DS Corner Panel" is a factory-embedded anchor panel with an L-shaped cross-section designed for the exterior corner sections of low to mid-rise buildings with a height of 31m or less. The target wind pressure is a positive wind pressure of 2,400 N/m² or less and a negative wind pressure of 1,600 N/m² or less. When used in conjunction with the "DS Panel," it allows for a neat finish at the corner sections, enhancing the building's exterior appearance. 【Features】 ■ Suitable for low to mid-rise buildings ■ Neatly finishes corner sections (also used with DS Panels) ■ Beautifies the building's exterior *For more details, please refer to the PDF materials or feel free to contact us.

The "BS Corner Panel" is a factory-embedded anchor panel with an L-shaped cross-section designed for the corner areas of handrails on balconies and similar structures in low to mid-rise buildings with a height of 31m or less. The target wind pressure is 3,300N/m² or less for both positive and negative wind pressures. When used in conjunction with the "BS Panel," it ensures that reinforcing steel materials are not exposed on the inside of the balcony upon panel installation completion, enhancing aesthetic appeal while neatly finishing the corner areas and beautifully completing the building's exterior. 【Features】 ■ Suitable for balconies ■ Target wind pressure: ±3,000 or less ■ Neatly finishes corner areas (when used with BS Panel) ■ Beautifies the building's exterior *For more details, please refer to the PDF document or feel free to contact us.