スギテック List of Products and Services

The infrared method for diagnosing exterior wall deterioration technology realizes the rationalization of the maintenance management of structures and the reduction and efficiency of maintenance costs. The surface of the exterior wall is warmed by external heat, which is then transmitted to the concrete medium. At this time, if there are any areas of delamination on the exterior wall, the air layer that forms in the gaps obstructs heat transfer, causing the surface temperature fluctuations to be greater and hotter in the damaged areas (delaminated areas) compared to the intact areas. Utilizing this characteristic, the surface temperature is captured and detected as an image using an infrared camera. 【Features】 ■ All environmental temperature, location, and shooting resolution at the time of imaging are recorded and reported. ■ All information regarding the accuracy of the infrared survey is made open. 　→ A second opinion can be sought regarding the results. ■ Reliable technology 　→ Implemented by technicians who have undergone training from the Japan Infrared Deterioration Diagnosis Technology Promotion Association (JAIRA). *For more details, please contact us.

When performing exterior wall cleaning of buildings, it is common practice to work while splashing cleaning water due to the method of operation. The splashing of dirty cleaning water can inconvenience residents and facility users. Additionally, the work is often carried out at night or on rainy days, and the dirty water is typically left to flow freely. To address such issues, we have devised the "Splash Prevention Cleaning Method." This method allows for the suction of dirty cleaning water while performing the cleaning work, preventing it from splashing. The suctioned dirty cleaning water is filtered to produce clean water, which can be reused directly. This makes it possible to work even during the day when there are many pedestrians. The cycle is as follows: Cleaning ⇒ Dirty Cleaning Water ⇒ Recycling Filter System ⇒ Recycled Clean Water ⇒ Cleaning ⇒ After the work is completed, the system discharges clean water, making it environmentally friendly. 【Features】 ■ Prevents the splashing of dirty cleaning water ■ Allows for the reuse of suctioned dirty cleaning water ■ Enables work during the day when there are many pedestrians ■ Discharges clean water after work, making it environmentally friendly *For more details, please contact us at the information below.

The strongest vacuum system "CK Vacuum Cleaner" that can be used with 100V. It is a wet-type dedicated vacuum system that powerfully sucks up wastewater through a special drum. The power supply is 100V, and it allows for long-distance suction with an extension of up to 60m for the suction hose. With a noise level of 60dB, it is suitable for use in residential areas without issues. 【Features】 ■ Powerfully sucks up wastewater ■ 100V power supply ■ Long-distance suction possible with hose extension up to 60m ■ Noise level of 60dB ■ The power connector is waterproof, allowing for outdoor use even on rainy days *For more details, please contact us below or download the catalog.

Visible cracks and the occurrence of bulging are the first steps of deterioration and deformation. The digital imaging method automatically extracts crack width and length, and CAD output is also possible. Cracks are automatically extracted from the captured digital images. It can automatically extract "crack width" and "crack length." Since crack extraction is analyzed from the captured images, there is no need to set up scaffolding for inspection as long as the shooting location can be secured. 【Advantages】 ■ Safety (non-contact): Diagnosis can be performed from a safe location. ■ Record: Deterioration conditions can be visualized with thermal images, and image data can be saved for analysis. ■ Economic (short time): No need for temporary structures such as scaffolding or gondolas. *For more details, please contact us.

◆◇◆ A new era of rebar corrosion exploration has arrived. Measuring rebar corrosion rates contributes to the longevity of concrete structures ◆◇◆ This is a completely non-destructive detector for rebar corrosion in concrete, utilizing innovative algorithms. Until now, measurements required multiple devices, but the iCOR can measure “simultaneously” and in “just a few seconds” with “one device.” It allows for extensive exploration without being affected by cable length, significantly reducing damage to concrete structures, as well as time, human resources, and costs compared to traditional rebar corrosion exploration methods. 【Features】 ■ No contact with rebar required due to concrete drilling 【Completely non-destructive】 ■ Simultaneous measurement of 【rebar corrosion rate】【concrete electrical resistivity】【natural potential※】, serving three functions with one device ■ Measurement time of 3 to 10 seconds per point ■ Significant reduction compared to the polarization resistance method (over 10 minutes per point) ■ Uses maintenance-free electrodes ■ Wireless connection between electrode and tablet ■ One person can handle everything from measurement to report creation, producing three types of corrosion maps (rebar corrosion rate, concrete electrical resistivity, natural potential※) on-site and determining corrosion locations immediately ※ Contact with rebar is required *For more details, please contact us below or download the catalog.

We are currently offering a free manga titled "Building Doctor Sugitec," which provides an easy-to-understand introduction to the building diagnostics and renovation work conducted by Sugitec. It showcases our strengths in providing one-stop services from diagnosis to renovation, as well as special diagnostics and other maintenance and renovation work. We do not simply conduct diagnostics and leave you wondering "how should we renovate?" or "we can't renovate, so we'll leave it to someone else." You can rely on us for a comprehensive service from diagnostics to renovation, utilizing our high level of technical expertise. 【Special Diagnostics Featured】 ■ Infrared exterior wall inspection ■ Reinforced concrete exploration ■ Rebar corrosion detection ■ Industrial endoscope For more details, please refer to our catalog or feel free to contact us.