三豊工業 List of Products and Services

We are offering a free set of 'Landscape Construction Method Catalog (6 items)' from Mitoyo Kogyo, a specialized company in landscape construction methods. Since 1998, we have started construction using landscape methods such as stamped concrete, gaining extensive experience across various types of sites from large commercial facilities to residential areas. Subsequently, we gradually began selling materials as a manufacturer. Since 2008, we have also been implementing stamping methods on asphalt, and we are capable of applying stamping methods to both concrete and asphalt. 【List of Methods】 ■ Stamped Concrete ■ Paper Concrete ■ Spray Deck ■ Stamped Wall ■ Street Print ■ Stain Concrete *For more details, please refer to the PDF materials or feel free to contact us.

• Interior wall decoration

"Mortar Sculpting" is a sculpting technique that requires particular skill among the decorative concrete technologies that use concrete and mortar. It mainly involves applying mortar to walls and, while it is still soft before it hardens, sculpting it with a knife or tapping it with a brush to create the appearance of real stones or bricks stacked together. This technique excels at recreating historical European streetscapes and old brick walls. By using a specially developed mortar for sculpting called "Carving Mix," we have made this specialized technique of mortar sculpting, which was previously only possible for a very limited number of skilled craftsmen, more accessible. [Features] ■ Versatile design capabilities ■ Easy to work with lightweight mortar specifically for sculpting ■ Applicable for both interior and exterior construction *For more details, please refer to the external link or feel free to contact us.

• Interior wall decoration
• Interior and exterior wall coating materials
• Cement mortar coating

"Staincrete" is a dyeing solution that, when applied or impregnated into cement-based materials such as concrete and mortar, creates unexpected color changes, patterns, and color variations through chemical reactions with the components inside the concrete or mortar. Unlike artificial coloring with paints or pigments, it achieves a natural texture and color similar to the kiln changes seen in ceramics. There are generally two methods for coloring concrete: using "paints" and using "pigments." However, the coloring method using Staincrete is closer to the sensation of "dyeing" rather than "painting." 【Features】 ■ Creates color changes, patterns, and color variations ■ Expresses a natural texture and color similar to kiln changes in ceramics ■ Allows for post-construction coloring ■ Convenient for color separation of borders and partial coloring *For more details, please refer to the PDF document or feel free to contact us.

• Special Construction Method
• paint

"Street Print" is a revolutionary method that transforms the surface of existing asphalt pavement into something resembling cobblestones or brick paving. While asphalt pavement has many excellent advantages, it has two major drawbacks: it looks dull and is prone to deterioration. "Street Print" dramatically resolves these two issues. It is a high-value-added method that can change asphalt pavement into something aesthetically pleasing and highly durable. 【Features】 ■ Unlimited installation locations ■ No cracking or peeling, requiring minimal maintenance ■ Excellent cost-effectiveness ■ Flexible design options ■ Slip-resistant and safe paving material *For more details, please refer to the PDF document or feel free to contact us.

• Special Construction Method

The "Stamp Wall" is a construction method that involves applying a special mortar designed for stamp walls to a surface and then pressing a specialized stamp with patterns resembling stone, brick, or wood grain onto it to transfer the design. Since the material is applied and the patterns are stamped sequentially from one edge, it contributes to a shorter construction period compared to tiles or stones that need to be laid individually over large areas. It can be used in a wide range of locations as long as there is a suitable substrate for applying cement-based materials. Additionally, custom design patterns can be created. 【Features】 ■ Quick installation even over large areas ■ Lightweight mortar that does not burden the structure ■ A wide variety of color options ■ Natural stone texture is faithfully reproduced in terms of relief and color ■ Original designs are also possible *For more details, please refer to the PDF materials or feel free to contact us.

• Interior wall decoration

The "Spray Deck" is a construction method that involves laying down variously designed templates on existing concrete floors or asphalt surfaces, spraying a special colored polymer mortar over them, and then removing the templates to create a design on the floor surface. With a thickness of only about 1 to 2 mm, there is little need for raising the floor level, and it can relatively easily refresh the image of the existing floor. For small areas, it is possible to complete the installation in just one day. 【Features】 ■ Recommended for renovations ■ Excellent wear resistance, allowing for vehicle access ■ Cost-effective as it can be installed without breaking the existing floor ■ Safe finish that is slip-resistant ■ Versatile design options *For more details, please refer to the PDF document or feel free to contact us.

• Special Construction Method
• Exterior and paving materials <General>

"Stamp Concrete" is a site construction method that applies designs to the floor surface using templates that mimic brick, tile, and natural stone paving. It combines sharp joint design patterns created with templates and the stamping technology of stamp concrete. Compared to traditional stamp concrete, the finished surface is more uniform and relatively flat, making it suitable for barrier-free environments such as public facilities, apartment complexes, and shopping malls. 【Features】 ■ Flat finish that is easy to walk on and suitable for barrier-free access ■ Accommodates complex site shapes ■ Low initial investment ■ Quick installation: over 100m² of stamping possible in a day if conditions are met ■ Easy to differentiate colors and patterns *For more details, please refer to the PDF document or feel free to contact us.

• Special Construction Method
• Exterior and paving materials <General>

"Stamp Concrete" is a flooring finishing method that combines various patterned mats (molds) and colors to create a wide range of designs. There are several types available for flooring, wall surfaces, new constructions, and renovations, but among them, the basic and universal option is stamp concrete, which is used worldwide. With a rich combination of colors and design patterns, it harmonizes with urban landscapes while vividly enhancing the environment and scenery. 【Features】 ■ Gentle texture of natural materials ■ Shortened construction period ■ Abundant design variations ■ Usable both indoors and outdoors ■ Excellent durability and easy maintenance *For more details, please refer to the PDF materials or feel free to contact us.

• Special Construction Method
• Concrete construction

Stamp concrete is a method where a mold with patterns resembling natural stone, brick, or wood is pressed onto freshly poured concrete before it fully hardens, creating a textured surface. With over 50 design patterns and a rich variety of colors, it can produce more than 10,000 different appearances. 【Features】 ■ Can create floors with a gentle texture of natural materials. ■ High durability allows for long-term use with peace of mind. ■ With over 40 design patterns and customizable colors, more than 10,000 variations are possible. ■ Significantly reduces costs and construction time, making it ideal for large areas. *For more details, please contact us or download the catalog.

• Special Construction Method