FPコーポレーション List of Products and Services

"Heavy Wall" manufactures original order panels suitable for each building. With a high wall ratio of 4.0, it eliminates internal load-bearing walls and allows for large openings in the outer perimeter of residential panels. Due to its flush wall design, it can be installed from the interior side between columns without worrying about scaffolding. Since insulation materials and panels are produced consistently in our own factory, we maintain stable quality at a high level. Panels are delivered to the site with thorough management, including nailing to surface materials according to wall ratios based on panel layout drawings for each site, and filling insulation materials without gaps. Because the load-bearing surface material and insulation are integrated into one panel, it eliminates differences in the skills of on-site workers and further shortens construction time. [Reasons for Selection] ■ Fully customized to match pre-cut drawings (opening cut-out panels, triangular trapezoidal gable walls, hold-down hardware lower frame processing, etc.), reducing carpentry work on-site and enabling efficient process management and shortened construction time. ■ There are many adoption records even for non-residential properties, and we also support OEM products such as panels without insulation. *For more details, please refer to the PDF materials or feel free to contact us.

"Ipané Q" is a housing panel developed to pursue shortened construction periods and cost performance. It is made of rigid polyurethane foam and a collection of small independent bubbles wrapped in a mesh, making it resistant to water and moisture, with minimal performance degradation over time, and excellent earthquake resistance, thus preventing condensation. Additionally, the panel structure integrates structural particle board and insulation material, allowing for the completion of both structural and insulation work in one step simply by installing it between the columns on-site. 【Features】 ■ High-performance polyurethane insulation material 75mm with a thermal resistance value of 3.9 m²W/K ■ Wall amplification of 4.3 (Ministry of Construction Notification No. 1100) ■ Can achieve seismic level 2 and level 3 for the entire house, enhancing earthquake resistance ■ By simply installing the wall panels, structural walls and insulation work are completed ■ Weighing approximately 27 kg, it is lightweight and can be handled by one person ■ Cost-effective panels based on standard panel heights (depending on floor height) * For more details, please refer to the PDF materials or feel free to contact us.

The "HIP Roof" is a high-performance roofing panel that allows for insulation, heat shielding, and heat discharge to be installed simultaneously. Utilizing the adhesive properties of rigid polyurethane foam insulation, the panel is formed in the factory by integrating the rafters, ensuring that the insulation material is filled without gaps. The panels can be customized to fit roof shapes with rafters up to 38×140mm and lengths of up to 5,500mm. 【Features】 ■ By integrating the rafter wood and rigid polyurethane foam insulation in the factory, gaps between the insulation and rafter wood are eliminated, making it easy to ensure airtightness. ■ High insulation performance. ■ Consistent quality maintained at a high level through integrated production in the factory. ■ Eliminates differences in the skills of installers, allowing for a reduction in construction time. *For more details, please refer to the PDF materials or feel free to contact us.

"Racty Gp" is a urethane insulation board that excels in workability, water resistance, heat insulation, and thermal performance, created based on feedback for simplified construction from the field. [Features] - Non-fluorinated urethane - Processed with notches for roof supports, allowing for insulation installation during framing - Insulation material that is water-resistant, made with non-woven fabric and rigid urethane with independent bubbles - Enables the securing of piping and wiring spaces without insulation gaps in the ceiling's recess - Thermal conductivity of 0.019 W/m·K, capable of meeting higher insulation grades with a thickness of 100 mm - An additional lineup of 120 mm thickness that meets the insulation performance standards for region classification 1.2, limited to Hokkaido and Tohoku areas *For more details, please refer to the PDF document or feel free to contact us.

"Ractee" is a polyurethane insulation board that excels in workability, water resistance, and thermal insulation performance, developed based on the opinions of those who implement it on-site. It adopts non-woven fabric (moisture-permeable waterproof sheet), which is now used in most residential exterior walls, as a protective material for insulation. This enhances the water resistance of the already water-resistant polyurethane insulation material. 【Features】 ■ Non-fluorinated polyurethane ■ The shape of the board's side makes it easy to push in ■ Equipped with fins (edges) to prevent slippage over the long term ■ Water-resistant insulation material with non-woven fabric and rigid polyurethane independent bubbles ■ Smooth flow from installation to mounting ■ Product lineup that meets higher insulation grades for each region ■ Insulation thickness of 80mm for walls that meet the specifications of the guidance standards for regions 1 and 2 will be released in April 2025 *For more details, please refer to the PDF document or feel free to contact us.

"Racty Silver" is an insulation board that combines heat insulation and breathability, allowing comfortable use of attics and lofts even in the peak of summer. It reflects solar heat with a heat-insulating material (non-woven fabric), dissipates heat through convection from the ventilation layer, and prevents heat conduction with polyurethane insulation, achieving a comfortable indoor and attic environment. Additionally, the presence of fins allows for easy lifting even when pressed too much, facilitating smooth installation. 【Features】 ■ Non-fluorinated polyurethane ■ Simultaneous installation of heat insulation material + ventilation layer + insulation material ■ The shape of the board's side facilitates easy insertion ■ Thin yet highly insulating, creating a comfortable indoor space *For more details, please refer to the PDF materials or feel free to contact us.

"RE+ Board" is a reform insulation material that allows for easy installation and thermal renovation. Thanks to its high insulation performance with a thermal conductivity of 0.019 W/(m·K), it provides excellent insulation effects even in thin layers, and is available in a lineup including "for interior wall," "for interior floor," and "for interior ceiling." The rigid polyurethane foam insulation material is available in two thicknesses: 30mm and 45mm. 【Features】 <For interior "walls"> ■ Installed over existing columns or gypsum boards ■ Rigid polyurethane foam insulation is available in two thicknesses: 30mm and 45mm ■ Options include plywood backing for wallpaper or gypsum board ■ The wooden batten parts of the board are secured to existing columns or studs with nails ■ Board sizes are 910×1,820mm and 2,000mm ■ Registered product for subsidies under the Child-Rearing Green Housing Support Project *For more details, please refer to the PDF document or feel free to contact us.

The "ASQ Board" is an additional insulation board aimed at achieving higher performance in housing. With a thickness of 45mm, the additional insulation board is easy to process on-site, allowing for reduced protrusions around windows and foundations. By installing this product, we can propose homes that meet higher grade standard values. We have also started releasing a thickness of 100mm to accommodate insulation grade 7. 【Features】 ■ Easy to process on-site ■ Reduces protrusions around windows and foundations ■ High insulation performance ■ Non-fluorinated urethane *For more details, please refer to the PDF materials or feel free to contact us.

FP Corporation is a company engaged in the manufacturing and sales of FP panels, sales of construction materials, construction industry, and real estate business. Leveraging the technology, achievements, and experience gained from high-performance insulation materials like FP panels, we offer a diverse range of products to meet the various needs required in housing. Our knowledgeable staff continuously supports customers facing challenges and requests such as "I want to shorten the construction period" and "I want to reduce costs." 【Business Categories】 ■ Manufacturing and sales of FP panels ■ Sales of construction materials ■ Construction industry ■ Real estate business *For more details, please refer to the PDF document or feel free to contact us.

FP urethane insulation panels are panels that excel at eliminating gaps, which are one of the causes of housing deterioration, by integrally molding the wooden frame and insulation material. They are designed to provide excellent earthquake resistance and durability, prevent housing corrosion due to condensation and humidity, and ultimately offer long-lasting homes with high asset value. As proof of this, they are the first in the industry to implement a "50-year no condensation warranty" within the wall structure. To date, approximately 50,000 "FP Homes" using FP urethane insulation panels have been built nationwide. In 2025, we will celebrate the 40th anniversary of our launch with a rebranding effort. Through collaborative experimental studies with M's Structural Design Co., Ltd. (headquartered in Kanagawa Prefecture, President: Minoru Sato), which specializes in structural design for wooden houses, the effectiveness of FP urethane insulation panels in specifically improving the seismic performance of homes has been confirmed. We invite you to watch a discussion on the future of seismic resistance in housing featuring Mr. Sato from M's Structural Design Co., Ltd. on YouTube.