JMPエンジニアリング List of Products and Services

The "NextVPU Feynman M1" is a smart depth camera equipped with active stereo vision technology. It features the NextVPU NE-D163A chip, which consists of a depth engine (DPU), a neural network engine (NPU), a vision acceleration engine (DSP), and an image signal processor (ISP). It can capture high-resolution, low-crosstalk, and highly accurate depth image data without the need for additional external processors, and it is also capable of outputting via a USB 3.0 (Type-C) interface. 【Features】 ■ Real-time HD depth calculation ■ Over 90° ultra-wide angle ■ Less than 0.2% low crosstalk ■ Equipped with 1.2T edge AI and high-performance DSP processing capability ■ RGB-D sensor synchronization support ■ Dustproof and waterproof, compliant with IP54 *For more details, please refer to the PDF document or feel free to contact us.

• Audio and video equipment

This document is a list of "Lithium-ion batteries 18650 year." It includes Panasonic's high-capacity model (Ni system) "NCR18650," as well as "NCR18650A," and Sanyo's general-purpose models "UR18650A" and "UR18650Y." Specifications such as voltage, capacity, and weight are provided. 【Featured Products (Partial)】 ＜Lithium-ion Batteries - Panasonic＞ ■NCR18650 ■NCR18650A ■NCR18650B ■NCR18650F *For more details, please refer to the PDF document or feel free to contact us.

• Other Batteries

The "SPS160PSC" is a compact, lightweight, integrated parametric speaker. Thanks to digitalization, it achieves high efficiency and stable operation without adjustments. Based on a different sound emission principle than conventional speakers, it has significantly sharp directivity, transmitting sound to a narrow area in a beam. 【Features】 ■ Significantly sharp directivity ■ Sound is transmitted to a narrow area in a beam ■ Provides sound only to the spot area ■ Sound does not mix even when installed in proximity ■ Reflects sound off walls and other surfaces to create virtual sound sources *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our "Mobile Implementation Line." With an overall length of 1.0m, it features an ultra-compact design. It is easy to achieve layout configurations that match production takt and implementation conditions. If you have space for a standard workbench, you can easily create a production line, and automation of processes that have previously required manual work, such as partial heating, additional components, and small lot production, can be done easily and at a low cost. 【Features】 ■ Ultra-compact design with an overall length of 1.0m ■ Easy to achieve layout configurations that match production takt and implementation conditions ■ Can easily create a production line with space for a standard workbench ■ Automation of processes can be done easily and at a low cost *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our customizable mobile robot, 'Actibo.' It enables the automation of wafer transport tasks in semiconductor manufacturing processes. With the optional battery, it can actively perform tasks. The "URe series" is equipped with a DC OEM control box, reducing its weight from 15kg to just 5kg. 【Features】 ■ Lighter and more convenient ■ Can actively perform tasks with the optional battery ■ Automates wafer transport tasks in semiconductor manufacturing processes ■ Capable of transporting and setting up workpieces in machine tools ■ Suitable for processes such as collecting parts from parts shelves in automobile manufacturing *For more details, please refer to the PDF materials or feel free to contact us.

• Automatic transport robot

The "Sterilization Light GTL30-165・GL" is a UV sterilization device that reduces the risk of infection associated with wiping during cleaning and disinfection. It enables sterilization of spaces, air, and surfaces in a 360° all-around manner. The lamp has a lifespan of 8,000 hours, eliminating the need for frequent lamp replacements. It significantly reduces the burden of disinfecting floors and equipment, as well as the effort involved in wiping cleaning. 【Features】 ■ Powerful sterilization capability ■ Made in Japan ■ 360° all-around sterilization ■ Easy maintenance ■ High efficiency in a short time *For more details, please refer to the PDF document or feel free to contact us.

• others

Introducing the "High Hardness Urethane Squeegee." It is highly elastic and has excellent conformity to the unevenness of the printing surface. It boasts outstanding abrasion resistance and solvent resistance. Additionally, the edges of the squeegee are uniformly finished, resulting in sharp printed materials. 【Features】 - Excellent abrasion resistance and solvent resistance - Highly elastic with good conformity to the unevenness of the printing surface - Uniformly finished edges of the squeegee - Produces sharp printed materials *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Fine 105-RS" is a device that recycles solder from dross (solder waste) generated during soldering. It pursues basic design principles, achieving simple operability and excellent work efficiency. The solder recovery rate has also improved, and the design takes into account temperature increases due to heater use, ensuring safety. 【Features】 ■ Easy to handle ■ Contributes to cost reduction ■ Simple operating system ■ Movable stirring propeller ■ Removable back panel ■ Separate solder recovery tray *For more details, please refer to the PDF materials or feel free to contact us.

• Other resource recycling

"STRETCH" is a capable mobile robot equipped with an arm (mobile manipulator) designed to safely collaborate with people at home and in the workplace. It can develop a variety of end effectors and is equipped with an Intel RealSense D435i RGB-D camera with a wide range of pan/tilt movements. It is possible to remotely operate the robot to grasp objects, take sequential photos of shelves from bottom to top, and perform various light tasks and convenient actions. 【Features】 ■ The camera provides excellent visibility of the robot's body and surroundings. ■ All joints have torque sensing, enabling contact detection. ■ The IMU supports high-frequency head posture estimation synchronized with 3D camera images. ■ Precision design offers a 340-degree field of view. ■ The ReSpeaker V2 microphone array supports voice recognition and sound source localization via ROS2. *For more details, please refer to the PDF document or feel free to contact us.

• others

The cream solder (solder paste) used in the implementation factory of the substrate, when opened, causes the solvent to evaporate over time, leading to a decline in the performance of the paste. Therefore, to prevent solder defects, it is discarded after a certain period. This device is a joint development by Tohoku University, Electronic Implementation.com, and our company. It regenerates the containers after cleaning and reuses the extracted metal powder as solder again. Unlike conventional methods that involve toxic gas emissions from combustion for metal extraction, this device separates and recovers without applying heat, making it environmentally friendly. 【Features】 ■ Regenerates the containers after cleaning and reuses the extracted metal powder as solder again. ■ An environmentally friendly device that separates and recovers without applying heat. ■ The cleaning agents used in the cleaning device can be distilled and regenerated in the solvent regeneration device for repeated use. ■ The reduced solvent due to evaporation is supplemented with new solvent for use. *For more details, please refer to the PDF document or feel free to contact us.

• Other resource recycling

We would like to introduce our autonomous mobile robots, the 'MiR Series'. The "MiR100/MiR200" can be operated immediately without any infrastructure setup. They offer a high cost-effectiveness, allowing for quick return on investment. Additionally, we have the robustly designed "MiR250," the "MiR500" with a payload capacity of 500 kg, and the "MiR1000" with a maximum payload of 1000 kg. 【Features of MiR100/MiR200】 ■ Automatic avoidance of people and obstacles ■ No need for magnetic tape or guides ■ Automation of on-site tasks (allowing personnel to focus on more advanced work) ■ Easy programming with a GUI ■ Maximum payload: 100 kg (MiR100), 200 kg (MiR200) *For more details, please refer to the PDF document or feel free to contact us.

• Automatic transport robot

Humans exhale CO2 by breathing, but in a sealed room, the CO2 concentration continues to increase. 'Logtta' visualizes ventilation based on carbon dioxide (CO2) concentration. It displays the ventilation status in numbers and colors. Additionally, by adding a temperature and humidity sensor, it becomes possible to display temperature and humidity as well. 【Features】 ■ Visualizes ventilation based on carbon dioxide (CO2) concentration ■ Displays ventilation status in numbers and colors - Green: Good ventilation - Yellow: Ventilation recommended - Red: Ventilation needed ■ By adding a temperature and humidity sensor, it also becomes possible to display temperature and humidity *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

We would like to introduce our comprehensive catalog of Canon network cameras. Our lineup includes the ultra-high sensitivity high-end model "ME20F-SHN," as well as the telephoto and low-light PTZ model "VB-M50B," and the "360° rotating model" that achieves high speed, high precision, and high magnification, among many others. We also offer a variety of models, including the "infrared lighting-equipped model" designed for low-light photography and the "standard model" that can be utilized for various monitoring purposes. 【Featured Products (Partial)】 <360° Rotating Models> ■ VB-R13VE (H2) ■ VB-R11VE (H2) <Shockproof Dome Models> ■ VB-H651VE ■ VB-M641VE *For more details, please refer to the PDF document or feel free to contact us.

• Security cameras and surveillance systems

We would like to introduce our "AGV Transport Vehicles." Starting with the practical "TC-900S II," which enables unmanned transport routes, we also offer a rich lineup including the "TZ-930WD24," suitable for parts transport between lines, and the "TFU-500," which is a low-profile model. Additionally, in response to customer needs for DIY AGVs, we have the drive unit model "TPF-520" available. 【Partial Lineup】 ■ Manual Push Cart Type ・TC-900S II ・TC-900MC II ■ Towing Type ・TC-900L II 24 ・PZ-930L80 *For more details, please refer to the PDF document or feel free to contact us.

• Automated guided vehicles (AGV, RGV)
• Automatic transport robot
• Trolley

The "EAGLE 3D-8800TWIN" is a 3D AOI inspection device that simultaneously inspects both sides of a circuit board. It enables full performance and full-speed inspection, equipped with a top camera and a bottom head camera. The drive axis moves only the camera head in the X/Y direction without moving the conveyor, providing a very fast, precise, and stable inspection platform due to this feature. 【Features】 ■ Simultaneous inspection of both top and bottom sides ■ Significantly reduces downtime compared to conventional products ■ Capable of full performance and full-speed inspection ■ Adopts multi-configuration ■ User-friendly with an easy interface *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments