フィッシャージャパン List of Products and Services

TermoFix H can securely fasten all common insulation materials to wood and boards with standard screws. By combining different shaft lengths and screw lengths, it can firmly secure insulation of any thickness.

• Insulation work
• Piping and insulation
• Heat insulation and heat shielding methods

The insulation disk DTM can be used with the insulation disk DHM or frame fasteners in soft insulation materials. The enlarged surface of the disk improves the holding function. This insulation disk DTM is available in stainless steel A2 and A4, making it suitable for use in outdoor environments such as humid conditions.

• Insulation work
• Piping and insulation
• Heat insulation and heat shielding methods

This insulation disk is used in combination with Hammerfix N and frame fasteners with diameters of 8 mm and 10 mm. The soft and pressure-resistant insulation board can be fixed to all building materials with this disk. When used in combination with Termoz and Termofix, it provides strong support for fastening low-compression-strength insulation boards. It enables flush installation of external insulation materials such as mineral wool.

• Insulation work
• Heat insulation and heat shielding methods
• Piping and insulation

The Fischer insulation disk "ISO Disk" is used in combination with Hammerfix N or frame fasteners. This disk allows for the secure fastening of pressure-resistant insulation materials to any building material. Since you can choose the optimal fastener according to the application, it can flexibly accommodate various construction conditions.

• Insulation work
• Heat insulation and heat shielding methods
• Piping and insulation

TermoFix PN is an economical hammer-driven fastener for external insulation designed for standard applications. It can securely fix pressure-resistant insulation materials such as polystyrene, mineral wool, and wood fiber (up to 180mm thick) to substrates like concrete and perforated building materials. It consists of a plate-integrated sleeve and a separate plastic nail, allowing for easy installation by simply hammering it in. This leads to reduced construction time and costs. The design features fiberglass-reinforced plastic nails that minimize the transmission of heat loss.

• Insulation work
• Heat insulation and heat shielding methods
• Piping and insulation

The Fischer insulation disk HA 36 (made of stainless steel A4) is a fixing disk used in combination with a 5mm screw. It can securely fix lightweight insulation boards or films to wood and wood-based substrates. The thin plug disk design allows for the application of a thin finishing material on the surface after fixing.

• Insulation work
• Heat insulation and heat shielding methods
• Piping and insulation

- Sleeve-integrated anchor with a plate. - Composite nails (steel tip - plastic head) reduce thermal bridging. *Composite nails are included separately. - Composite nails require several strikes with a hammer. - The 3 mm thick plate fits perfectly into the insulation material, providing a thin reinforcement layer. - The steel tip of the composite nails offers high holding power. - A drill diameter of 8 mm and a shallow effective embedment depth of 25 mm reduce drilling time. - For soft insulation materials, large discs DT 90, DT 110, and DT 140 are combined with the anchor plate.

• Insulation work
• Heat insulation and heat shielding methods
• Piping and insulation

Various disk diameters of 90mm, 110mm, and 140mm accommodate various insulation materials and insulation thicknesses.

• Insulation work
• Heat insulation and heat shielding methods
• Piping and insulation

The screw plug flatly covers the surface of the insulation material after it has been fixed. This makes the surface of the insulation uniform, facilitating the application of the reinforcing mortar.

• Piping and insulation
• Heat insulation and heat shielding methods
• Insulation work

By using round caps, the surface of the insulation material after plug installation can be uniformly covered, making the application of reinforcing mortar smoother.

• Insulation work
• Heat insulation and heat shielding methods
• Piping and insulation

The combination of a polyamide support disk and a plastic plug is a product designed to securely fix pressure-resistant insulation materials using wood screws, particle board screws, and self-drilling screws. The combination of insulation fasteners and screws allows for optimal fixation of pressure-resistant insulation materials. Two shaft lengths are available to provide appropriate fastening solutions according to the application.

• Insulation work
• Heat insulation and heat shielding methods
• Piping and insulation

The setting tools for seat boring construction are specially adjusted tools for each type of plug.

• Insulation work
• Heat insulation and heat shielding methods
• Piping and insulation

◆Features - Fischer wood screws that have holding power in the base material and are pre-assembled. - The special shape on the underside of the disc roughens the surface of the insulation material, allowing it to embed with reduced torque. - Clean installation using the dedicated tool 6H. Optionally, the dedicated tool CS can be used for counter-sinking installation with a combination of dedicated bits. - Quick installation with a minimum screw penetration depth of 24 mm, without the need for pre-drilling. - Installation can be considered for insulation material with a total thickness of up to 300 mm. - Counter-sinking installation provides a flat finish. ◆Applicable Base Materials - MDF plywood - OSB plywood - Chipboard - European gypsum board - Partitions - Solid wood, etc.

• Insulation work
• Piping and insulation
• Heat insulation and heat shielding methods

The Fischer zinc-plated insulating disk HV 36 is a fixing disk used in combination with a 5mm screw. It securely fixes lightweight insulating boards and films to wood and wood-based substrates. The flat-shaped plug disk also allows for the installation of thin finishing materials on top after fixing.

• Insulation work
• Heat insulation and heat shielding methods
• Piping and insulation

The Fischer plastic insulation disc HK 36 is a product designed to be used in combination with a 5mm screw. It can be used to secure lightweight insulation boards and films to wooden and wood-based substrates. This flexible plastic disc can accommodate a variety of applications.

• Insulation work
• Heat insulation and heat shielding methods
• Piping and insulation

◆Features - The DHT S dedicated self-drilling screw with a diameter of 4.8mm can be screwed in without a pilot hole, reducing construction effort. - The plug reduces heat conduction, minimizing marks on the finished surface. - The very thin disc shape is used for thin finishing layers and reinforcement layers, providing great flexibility. - Polyamide disc with a diameter of 50mm. ◆Suitable Base Materials - Wood and wood-based building materials - Thin steel plates of 0.8mm or more

• Insulation work
• Heat insulation and heat shielding methods
• Piping and insulation

● Made of polypropylene ● The serrated shape grips the hole wall during insertion. ● Reduces perforation volume for minimum perforation depth. ● Wide temperature resistance from -40 to 80℃. ● Easy and quick insertion construction. ● Minimal buckling of the shank. ● No additional screws or nails. ● Halogen-free.

• Insulation work
• Heat insulation and heat shielding methods
• Piping and insulation

This is a high-quality optional cover cap for DHM and DHM A2.

• Insulation work
• Piping and insulation
• Heat insulation and heat shielding methods

- The metal insulation fastener achieves fire resistance performance of F120. It can be used with confidence even in places where fire resistance is required. - The DTM 80 plate (sold separately) for soft insulation materials makes storage easier and allows for cost reduction. - The simple driven installation method shortens the work process and reduces the installation load. - The shaft shape enables installation without pre-drilling into aerated concrete, reducing the installation process by one step. - Made of stainless steel (DHM A2, material 1.4301), it is suitable for outdoor and damp environments. - DHM can also be combined with colored cover caps, enhancing the aesthetic quality of the finish.

• Insulation work
• Heat insulation and heat shielding methods
• Piping and insulation

◆Applicable Base Materials - Ordinary concrete - Solid bricks - Solid limestone bricks - Solid blocks made of lightweight and ordinary concrete - Vertical hole bricks - Hole-punched limestone bricks - Aerated lightweight concrete - ALC ◆Features - Hammer set construction with an option for rotary set installation, termed "termoz CNplus." - Fasteners applicable to various base materials and types of insulation. - Flexible for use, reducing warehouse and order processing. - Quick and simple hammer set construction fasteners allow for the use of electric drivers to readjust fasteners that are too deep during installation. - Using dedicated tool CS for embedded or flush installation. The only fastener with multiple construction methods. - Additionally, rotary installation is set up as an optimal application for soft insulation materials on the surface of insulation. - The thin disk with a thickness of 2.5mm fits perfectly to the insulation, providing a low-cost thin reinforcement layer. High energy efficiency composite nails through embedded rotary installation serve as thermal bridge reduction.

• Heat insulation and heat shielding methods
• Piping and insulation
• Insulation work

- New products in the Duo series following DuoPower and DuoTec - The advanced metal bit cuts its way through while drilling, making installation easy without the need for a pilot hole (drilling and inserting the plug can be done simultaneously) - Suitable for hollow substrates such as gypsum board (single layer and double layer), reinforced board, and European cement board.

• Other fittings

- Latest model of wide-base anchor for heavy loads - Removal of the sleeve part is possible with the use of dedicated tools - Ideal for infrastructure construction such as power plants, fuel tanks, bridges, railways, and tunnels - The wide-base design places less burden on the base material, making it suitable for installation in areas where micro-vibrations occur - Compatible with pre-installation and on-site fitting - Available in steel (electro-galvanized) and stainless steel options

• Tunnel Materials
• Harbor Construction
• Port supplies

1. Made of fiberglass reinforced plastic with "super high strength" (maximum load 90kg note*) 2. Easy installation with just one manual screwdriver (electric drill installation is, of course, also possible) 3. Choose from 3 types of hook shapes! 4. "Matte white" color that blends into any space 5. Stylish finish (the included caps and rings can neatly hide the screw heads) *Note: The allowable shear load when EasyHook Angle 10 is fixed to concrete using DuoPower 10x50 and screws with a diameter of 6mm. *You can choose your preferred hook from three shapes: EasyHook Angle, Round, and Loop.

• Hook

◆Compatible Base Materials - 3-layer solid wood - MDF plywood - OSB plywood ◆Functions and Usage - Fasteners are installed using a standard Torx T30 bit for flush mounting. - Use the dedicated tool T T S for embedding installation. Screw in the fasteners for precise installation positioning. Insert a separately sold cap into the countersink area to make it flush with the surface of the insulation material. - Rotate the disk of the dedicated tool T T S to make it flush with the surface of the insulation material. Install the fasteners without going too deep.

• Heat insulation and heat shielding methods

◆Applicable Base Material ・Thin steel plate / trapezoidal metal sheet, maximum thickness 1.5mm ◆Function and Usage ・Installation by fitting to the actual object through insulation material without pre-drilling. ・The appropriate driver bit is European type Phillips #2. ・Quick and easy installation with a cordless electric impact driver. ・Total thickness includes a load-free layer such as an adhesive layer.

• Heat insulation and heat shielding methods

◆Applicable Base Materials - European Technical Certification Base Material Classification (Normal Concrete, Solid Brick, Hollow Brick, Lightweight Concrete, ALC) - Normal Concrete - Concrete (Shell Structure) - Building Brick - Solid Limestone Brick - Lightweight Concrete Hollow Block - Vertical Hollow Brick - Hollow Limestone Brick - ALC - Lightweight Concrete - Sepa Parpaing (French-made Brick), etc. ◆Functions and Usage - Embedded through the perforated holes into the insulation material, using a setting tool to screw in. - The spiral disk and screw rotate simultaneously through the insulation material with the same pitch, locking in a co-rotating manner against the base material. - After that, the steel screw enters the expansion zone, compressing the compression zone up to a few millimeters thick, and adheres to the base material. - The setting is complete when the top surface of the insulation material and the bottom surface of the marking ring are flush.

• Heat insulation and heat shielding methods

◆Applicable Base Materials - European Technical Assessment Base Material Classification (Normal Concrete, Solid Brick, Hollow Brick, Lightweight Concrete, ALC) - Normal Concrete - Concrete (Shell Structure) - Building Brick - Solid Limestone Brick - Lightweight Concrete Hollow Block - Vertical Hole Brick - Hole Limestone Brick - Lightweight Aggregate Concrete - ALC, etc. ◆Functions - Installation by aligning with the actual drill hole through the insulation material. - Seat excavation construction using the dedicated tool Setting Tool CS (sold separately). - As an option, the dedicated tool Setting Tool CS can be used in reverse for flush installation. - When using the dedicated tool Setting Tool CS in reverse, the stop disk is installed flush with the surface of the insulation material. - After seat excavation construction, a circular cover (sold separately) is attached. - No plug cap is required for flush installation. - For sizes of other types TermoZ CS ii 8 DT 110 V, please refer to the separate catalog.

• Heat insulation and heat shielding methods

◆Applicable base materials - Concrete - Solid limestone bricks - Perforated bricks - Construction bricks - Lightweight concrete hollow blocks - ALC - Perforated limestone bricks

• Heat insulation and heat shielding methods

◆Applicable Base Materials - Ordinary concrete, with and without cracks - Perforated bricks - Perforated limestone bricks - Lightweight concrete hollow blocks - Solid limestone bricks - Solid bricks - Other applicable base materials - ALC

• Heat insulation and heat shielding methods

◆Applicable Base Materials - Concrete - Lightweight concrete porous blocks - Vertical hole bricks - Perforated limestone bricks ◆Applications Fastening the following insulation materials to facades, etc.: - Polyurethane boards - Bonded wood wool lightweight building material boards - Cork boards / coconut fiber mats - PU panels

• Heat insulation and heat shielding methods

◆Applicable Base Materials - Bead method polystyrene foam (EPS) type - Extruded polystyrene foam (XPS) type - Wood fiber type - Rigid polyurethane foam type - Rock wool, etc. ◆Features - Dedicated fastening for direct installation to insulation materials, designed to reduce thermal bridging. - FID ii shape allows for easy installation without pre-drilling through a thin mortar layer, shortening the construction process. - FID ii is a high-load fastener specifically for insulation materials, suitable for thin insulation thicknesses of 60 mm, while FID ii Plus is for thicker insulation thicknesses of 100 mm. - Quick and economical installation using Torx T40.

• Heat insulation and heat shielding methods
• Insulation work

About FZP ◆ Can be installed on any panel material with a minimum thickness of 8 mm By using our expansion anchor FZPii, it is possible to install panel materials with a minimum thickness of 8 mm. It can be used for the installation of various panel materials such as natural stone, ceramics, ceramic tiles, HPL, and fiber cement boards. ◆ Energy-efficient for heating and cooling By using a dry construction method on the back, it provides the effect of a "rain screen" that protects the exterior walls from rainwater and other weather damage. An air layer is created between the structure and the panel material, enhancing heating and cooling efficiency. ◆ Hundreds of installation achievements both domestically and internationally We have a wealth of installation experience both domestically and internationally, including projects such as the Marseille Contemporary Art Center designed by Kengo Kuma, the Nagatacho Capitol Tower, and the 412.6 m tall Al Hamra Tower in Kuwait.

• Joints between components

About FZP ◆ Can be installed on any panel material with a minimum thickness of 8 mm By using our expanded base anchor FZPii, it is possible to install panel materials with a minimum thickness of 8 mm. It can be used for the installation of various panel materials such as natural stone, ceramics, ceramic tiles, HPL, and fiber cement boards. ◆ Energy-efficient for heating and cooling By using a rear dry construction method, the "rain screen" effect protects the exterior walls from rainwater and other weather damage. An air layer is created between the structure and the panel material, enhancing heating and cooling efficiency. ◆ Hundreds of installation achievements both domestically and internationally We have a wealth of installation experience both domestically and internationally, including the Marseille Contemporary Art Center designed by Kengo Kuma, the Nagatacho Capitol Tower, and the 412.6 m tall Al Hamra Tower in Kuwait.

• others

About FZP ◆ Applicable to any panel material with a minimum thickness of 8 mm By using our expansion-type anchor FZPii, it is possible to install panel materials with a minimum thickness of 8 mm. It can be used for the installation of various panel materials such as natural stone, ceramics, ceramic tiles, HPL, and fiber cement boards. ◆ Energy-efficient for heating and cooling By using a rear dry construction method, it provides the effect of a "rain screen" that protects the exterior walls from rainwater and other weather-related damage. An air layer is created between the structure and the panel material, enhancing heating and cooling efficiency. ◆ Hundreds of construction achievements both domestically and internationally We have a wealth of construction achievements both domestically and internationally, including the Marseille Contemporary Art Center designed by Kengo Kuma, the Nagatacho Capitol Tower, and the 412.6 m tall Al Hamra Tower in Kuwait.

• others

About FZP ◆ Can be installed on any panel material with a minimum thickness of 8 mm By using our expanded base anchor FZPii, it is possible to install panel materials with a minimum thickness of 8 mm. It can be used for the installation of various panel materials such as natural stone, ceramics, ceramic tiles, HPL, and fiber cement boards. ◆ Energy-efficient for heating and cooling By using a dry construction method on the back, it provides the effect of a "rain screen" that protects the exterior walls from rainwater and other weather damage. An air layer is created between the structure and the panel material, enhancing heating and cooling efficiency. ◆ Hundreds of installation achievements both domestically and internationally We have a wealth of installation experience both domestically and internationally, including the Marseille Contemporary Art Center designed by Kengo Kuma, the Nagatacho Capitol Tower, and the 412.6 m tall Al Hamra Tower in Kuwait.

• others

● The world's first high-power plug made from two materials: plastic and nylon ● Adapts to all types of base materials such as concrete, brick, ALC, gypsum board, and natural stone by transforming into three shapes: "expansion," "folding," and "knot" ● The serrated shape reduces co-rotation during screw tightening ● Can also be used with extruded cement boards ● Usable with small screws and coach screws ▼ For more details, please refer to our website. https://00m.in/yylJp

• Joints between components

【Product Description】 ● Compatible with both hollow substrates (such as gypsum board, OSB board, plywood, steel plates, plastic boards, concrete blocks, etc.) and dense substrates (such as concrete and wood). ● Flexible screw holder compatible with various spiral screws and hooks. ● The toggle section, reinforced with fiberglass plastic and metal skeleton insert (DuoTec12), exhibits high tensile and shear strength in various panel building materials. ● The soft gray nylon contact surface distributes the load on the back of the panel. ● The white flange sleeve with snap function (DuoTec12) allows for quick installation of fasteners. ▼ For more details, please refer to our website. https://00m.in/121Hj

• others

This product is a super high-strength hybrid resin that can withstand high-temperature environments of +150°C and various embedding depths. It can also be applied to ceiling and wall surfaces with strong adhesion. An air gun is also available. We have extensive experience in projects around the world. 【Features】 ■ Compatible with high-temperature environments of +150°C ■ Accommodates various embedding depths ■ Strong adhesion ■ Easy to apply ■ Extensive experience in projects worldwide *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• Work tools
• glue

This product is a high-performance epoxy resin that can be applied even in rainy conditions, allowing for a reduction in construction time. It has strong adhesion and is compatible with diamond core drilling, which reduces noise during renovation work on apartments and buildings. As it is classified as a non-toxic hazardous substance, special procedures are not required for delivery, storage, sale, or use. It can be used for handrails, seismic reinforcement work, and more. 【Features】 ■ Can be applied underwater ■ Not subject to toxic and hazardous substance regulations ■ Non-styrene ■ Strong adhesion ■ Reduces construction noise ■ Comprehensive sick house measures *For more details, please refer to the PDF materials or feel free to contact us.

• Safety and consumables
• Work tools
• glue

The "FIS VS Plus 360S" is a cartridge-type adhesive anchor that possesses strong bonding power and high heat resistance. It is compatible with a wide range of base materials, including RC, ALC, and hollow substrates. Due to its ultra-low odor, it is easy to use in indoor renovation projects. Additionally, we also offer products such as the "FIS ER 390 S," which is suitable for underwater construction, and "Super Bond." 【Features】 ■ Strong bonding power ■ Fast curing time for shortened construction period ■ Non-styrene ■ High heat resistance ■ Compatible with a wide range of base materials ■ Economical with intermediate storage capability ■ Easy to install ■ Strong alkali resistance *For more details, please refer to the PDF materials or feel free to contact us.

• Safety and consumables
• Work tools
• glue

The "QUATTRIC Quattro II" is a drill bit with a four-blade carbide head. It features an improved power shoulder that reduces damage within concrete. It is equipped with a robust main cutting edge for rapid drilling, a reverse chamfer that minimizes interference with rebar, and a centering tip that makes positioning easy. 【Features】 ■ Long-lasting carbide head (up to drill diameter of 10mm) ■ Robust main cutting edge for rapid drilling ■ Reverse chamfer that reduces interference with rebar ■ Easy-to-position centering tip ■ Wear marks for easy recognition of wear limits according to PGM *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• Work tools

"PU 1/500 B2" is a form that does not use the alternative refrigerant HFC, which is of great concern due to its significant greenhouse effect. It complies with combustion class B2 (self-extinguishing) according to the German Industrial Standard DIN. It does not contain chemicals such as ethylbenzene, styrene, toluene, xylene, formaldehyde, or PCBs. 【Features】 ■ Ergonomic adapter designed for ease of use ■ Can be stored horizontally ■ Non-fluorocarbon ■ Non-formaldehyde product registration certification F☆☆☆☆ JAIA-011744 *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• Urethane foam
• Hard urethane foam

"EA II" is a metal expansion anchor suitable for pre-installed mounting. The rimmed anchor prevents falling into the hole and allows for reliable hammer-set installation. Additionally, the metric internal thread uses standard metric coarse thread bolts for ideal adaptation to the intended applications. 【Features】 ■ The EMS machine-driven type dedicated tool allows for easy installation, especially in continuous work scenarios. ■ The EHS Plus hand-driven type dedicated tool features markings that indicate expansion on the rim, simplifying anchor installation management and enhancing safety. ■ Designed for an effective embedment depth of 25mm, it prevents falling from the hole before expansion work. *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Safety and consumables

"FBN II" is a metal expansion anchor suitable for pre-installation and on-site fitting, as well as for floating installation. Due to the significant load, the standard embedding depth allows for consideration of fewer anchors and smaller plate sizes. The long screw section balances permissible tolerances, enabling floating installation and providing flexibility. 【Features】 ■ Shallow installation reduces drilling depth, enhances flexibility, and shortens construction time. ■ Easy installation due to fewer driving cycles and minimal tightening slip. ■ The driving depth reduces damage to the screw section, allowing for rapid installation. ■ Drilling with a dust-collecting drill is also possible. *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools
• Safety and consumables

"FH II-I" is a metal expansion anchor suitable for pre-installation. Using a functional principle with a hex wrench, it quickly expands and allows for comfortable upward installation. Additionally, it enables the removal of surface-to-surface connections and provides suitable flexibility for the reuse of undamaged fastening points. 【Features】 ■ Allows for comfortable upward installation ■ One hex wrench included in each small box ■ Enables removal of surface-to-surface connections and provides suitable flexibility ■ Drilling with a dust-collecting drill is also possible *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Safety and consumables