エフティーエス List of Products and Services

【Features】 - The durability of the diamond indenter has significantly increased (approximately 5 times) - The indentation is very small - Test force can be selected according to the application - The tip shape can be changed by attaching different attachments according to the test area (compliant with ASTM A 1038, DIN 50159-1/2) - Capable of testing a wide range of hardness from aluminum materials to heat-treated steel - Ideal for field testing as it does not depend on the test direction - Can be converted to any hardness scale (HV, HRC, HRB, HB, etc.)

• Non-destructive testing

The Screening Eagle's (Proceq) rebar detector 'GP8800' from Switzerland is a groundbreaking wideband frequency radar that anyone can easily operate. It enables rebar detection in narrow spaces that were previously abandoned, such as gaps between pipes and walls, under balcony railings, and around bridge pier footings. It features 2D and 3D data projection capabilities using AR (augmented reality), allowing data sharing via iPad. The exploration results are projected in AR on the iPad monitor, making it visually easy to confirm the internal conditions. 【Features】 ■ Maximum detection capability of 65cm ■ Lightweight (460g) and compact ■ Can scan in narrow widths of less than 100mm (with wheel mounting position switching function) ■ Standardization and efficiency of work levels through area scanning ■ Can detect up to 45mm from the wall ■ Can detect cylindrical shapes *For more details, please refer to the PDF document or feel free to contact us. **FTS Co., Ltd. is the official distributor of Screening Eagle (Proceq) in Japan.

• Non-destructive testing

The "GP8000" is a rebar detection device that uses electromagnetic radar technology capable of detecting rebar, post-tension cables, voids, electrical wiring, and buried objects. Similar to the migration view, 2D and 3D displays can be immediately checked on-site. In addition to high-altitude measurements and grid measurements, the display device, an iPad, can be detached for measurements, allowing for measurements suited to the situation at hand. 【Features】 ■ Adopts SFCW technology ■ Uses an iPad for the display device, enabling easy operation and quick data processing ■ All four wheels are equipped with encoders and have thicker tires for better grip ■ The vehicle height is 8mm, allowing measurements without concern for minor unevenness ■ Powered by AA batteries, eliminating worries about air transport *For more details, please refer to the PDF document or feel free to contact us.

• Non-destructive testing

Lightweight (3.75kg), compact size, suitable for high-altitude and field work. Equipped with an 8.4-inch touchscreen. A large screen that is easy to see and bright. Panel layout designed for excellent operability. Designed for one-handed operation. <Features> ■ High inspection capability with phased array By using an array probe, similar to medical ultrasound examinations, it is possible to visualize the interior of the inspection target and visually capture the location of internal defects over a wide area. ■ Packaging designed for field use A robust design that is lightweight yet shock-resistant. ■ Abundant optional features set for each inspection method Simultaneous display of phased array and TOFD method improves defect detection and sizing performance of welds. Additionally, simultaneous scanning expands the exploration range, contributing to improved inspection efficiency. *This is an optional feature. ■ A simple model that consolidates only the necessary functions Eliminating unnecessary features, it focuses on inspection accuracy and operability.

• Other measuring instruments

Lightweight (4kg) and compact size, suitable for high-altitude and on-site work. It features an 8.4-inch touchscreen with a bright and easy-to-read large display, designed with an emphasis on operability and a layout that allows for one-handed operation. <Features> - Maintains the operability of SyncScan while significantly enhancing functionality High-performance model with a maximum of 128 elements and simultaneous excitation of 32 elements - Detection of welding defects and internal defects in steel materials - Flaw detection in high-damping materials and thick plates - High-performance model capable of testing with various probes and scanners - A wide range of scanners available tailored to inspection locations

• Other measuring instruments

The performance of concrete varies significantly depending on the concrete mix, placement method, type of formwork, and curing method. Therefore, verifying the quality of the surface concrete (cover concrete) is extremely important when considering durability performance. According to Swiss standard SIA 262:2003, "The impermeability of the cover concrete must be checked by permeability tests on cores taken from the structure or from the structure itself." Permatol AC+ can measure the air permeability of surface concrete in a completely non-destructive and very simple manner.

• Non-destructive testing

By adopting a special alumina ball indenter with a diameter of 3 mm, it has become possible to measure lighter, smaller, and thinner samples compared to conventional rebound hardness testing machines. 【Features】 - The world's only product that measures the hardness (rebound coefficient) of samples using micro balls. - No complicated adjustments are needed; testing can be started immediately after turning on the power. - No need to prepare test pieces; both large and small parts can be tested as they are. - Minimal impact on the sample, leaving only a small indentation. - Portable and easy to carry (testing machine: approximately 0.6 kg). - Can be tested in any orientation, 360° (vertical, inverted, horizontal, etc.). 【Measurement Principle】 1. A micro ball (φ3 mm / weight 0.06 g) is collided with the sample, and the speeds on the way in and out are measured to calculate the rebound coefficient e (= speed ratio). 2. If the sample undergoes only elastic deformation, ideally, the speeds on the way in and out will be the same (e=1). 3. If the sample undergoes plastic deformation, the kinetic energy of the micro ball is lost to the extent that it is used to form an indentation, resulting in e<1. 4. The harder the sample and the less it undergoes plastic deformation, the larger e will be; conversely, the softer the sample, the smaller e will be.

• Non-destructive testing

No adjustments for temperature or humidity are necessary; you can easily take measurements just by pointing it at the measurement location. Its handy size allows for one-handed operation, making it easy to carry. Measurement data can be saved, and it is also possible to print the saved data.

• Non-destructive testing

It is one of the rebound methods that estimate the compressive strength based on the height (rebound value: R value) to which a hammer strikes concrete and bounces back, and it is a non-destructive testing method that can be performed without damaging the structure. It is also used for estimating the strength of rock formations in addition to concrete. The compressive strength estimation formulas presented at various academic societies are all based on test data from the Schmidt concrete test hammer. Schmidt Live automatically processes troublesome average values and angle corrections, and it also has a moisture content correction function. Since standards such as the Japan Society of Civil Engineers (JSCE G-504) are also registered, strength estimation is easy. It has evolved into a type that can be easily used by anyone without individual differences.

• Non-destructive testing

It is an accurate portable 1 control channel testing device. It features intuitive touch panel control and a color display, and it is also capable of graphic display of measurement values.

• Other analytical equipment

Monitoring lasts from 15 minutes to a maximum of 31 days. During measurement, it is also possible to simultaneously check speed, curve guidance/curvature, and temperature within the sample (-20° to 125°).

• Non-destructive testing

The potential galvanostatic pulse method allows for the evaluation of corrosion density, electrical resistance, and natural potential. While measuring corrosion density, it is also possible to simultaneously measure the electrical resistance of concrete and its natural potential. Reliable assessments of rebar corrosion can be achieved even when the concrete surface is in a wet state, carbonated state, or treated for corrosion protection, as natural potential and electrical resistance can be obtained.

• Reinforced concrete construction

At FTS Corporation, we handle a wide variety of rebar inspection devices, ranging from electromagnetic induction methods to electromagnetic wave radar methods. 【Do you have any of these concerns?】 ■ I want to investigate whether a concrete block has seismic resistance... ■ I want to confirm whether there is a possibility of collapse in a concrete wall... ■ I'm concerned about whether there is rebar in the concrete block or concrete wall... → If so, please consider our rebar detection devices! *For more details, please refer to the PDF materials or feel free to contact us.

• Non-destructive testing

At FTS Corporation, we handle a wide variety of rebar inspection devices, ranging from electromagnetic induction methods to electromagnetic wave radar methods. We provide rebar inspection devices that meet your needs, from inspecting rebar in deep locations within concrete to simple rebar inspection machines for surface-level inspections. 【Product Lineup】 ■ Radar Exploration Device GP8000 ■ Radar Exploration Device C-THRUE *Equipped with 2GHz x 2 channels! ■ High-Performance Radar Rebar Exploration System Conquest 100 ■ Electromagnetic Induction Rebar Exploration Device Profoscope *Simple type! ■ High-Function Electromagnetic Induction Rebar Exploration Device Profometer PM-630AI / PM-650AI *For more details, please refer to the various product catalogs available for download.

• Non-destructive testing

The "Listening Strength Meter II" measures the propagation speed of impact elastic waves generated by lightly tapping a concrete surface with a hammer, estimating the compressive strength of structural concrete through a compressive strength estimation formula. With this extremely simple non-destructive test, compressive strength can be estimated accurately. Measurements can be taken by one person, and results are obtained instantly on-site. Since it is a non-destructive test, measurements can be taken as many times as needed. 【Features】 ■ Very easy to operate ■ Can be measured by one person ■ Instant results on-site ■ Direct confirmation of the strength of structural concrete ■ Non-destructive testing allows for measurements anytime, anywhere, and as many times as needed ■ Applicable for estimating compressive strengths of 10 to 150 N/mm² *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

The "Pyridine D6J" is a penetration testing machine that conducts quality inspections and decay diagnostics of wood materials such as wooden play equipment and wooden retaining materials. By automatically reading the penetration depth, it allows for the quantitative measurement of the degree of decay progressing from the outside in a short amount of time. Measurement data can be saved on the device and transferred to a PC via USB cable. It is also possible to display the measurement data in a graph format. 【Features】 ■ Quantitative measurement of the degree of decay progressing from the outside ■ Measurement data can be saved on the device and transferred to a PC via USB cable ■ Operation is very simple, allowing anyone to achieve the same level of precision in measurements ■ The body is made of aluminum to reduce weight ■ Can be used for decay diagnostics of wooden play equipment and wooden retaining materials *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

"PICO-BT / SONO-WZ" is a testing device that allows for the simple and rapid measurement of the unit water content in fresh concrete. It can measure with the same accuracy as a heating drying oven, regardless of the type of fresh concrete. By inputting the density of the concrete into this device, it is possible to measure the unit water content (kg/m³). The measurement time is quick, typically taking about 2 minutes for 5 measurements. *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

"Conquest 100" is designed for easy operation by anyone, and by using the "Grid Scan Function," which displays the rebar condition in 2D, you can understand the rebar status on-site as if you were seeing through it in just 2 to 3 minutes. It can also detect power cables, PC steel wires, PVC pipes, and voids. The sensor unit weighs about 1 kg, making it very lightweight and highly maneuverable.

• Other measuring instruments

Stream C allows for high-density and high-precision data collection through a 32-channel high-density array antenna. It can automatically detect buried objects in real-time and obtain the data necessary for 3D mapping in a single survey. Features: - Automatic exploration of pipe locations in real-time - Capable of surveying both vertical and horizontal buried pipes in one survey - Easily surveys differences in pipe branching and burial depth - Can also detect subsurface voids with the 32-channel high-density array antenna - Data management in an absolute coordinate system linked with GPS - Survey results can be converted into CAD data using GRED HD software - Exploration is easy with the electric assist feature - Can complete surveys in one-third the time compared to conventional single radar systems - Vehicle towing is also possible (consult separately)

• Consulting companies

■AT130 Standard model from Ernst. A high-precision hardness testing machine developed through years of experience. ■AT250 Equipped with robust data processing functions necessary for quality control and line inspections. Features an easy-to-use touch panel for improved usability. ■AT350DR-TM The head automatically rises and falls, allowing for speedy testing. A high-precision model that can test large components when the lifting stand is removed. ■BRE-AUT-BRG No reading required. A Brinell hardness testing machine that achieves automation on the manufacturing line. Capable of acquiring and printing various statistical data, with custom specifications available. ■OMNITEST A hardness testing machine capable of testing most hardness values, including Vickers and Rockwell. Offers a wide range of options, allowing testing of samples of all shapes and materials.

• Non-destructive testing

The Panjit series is a highly effective ultrasonic testing device in fields such as concrete, wood, ceramics, and bricks. It is also more compact and easy to carry. It is designed for ease of use in both field and laboratory settings. The operation employs an easy-to-understand touchscreen interface, allowing for adjustments like zooming in and out with fingertip control, similar to a tablet device. 【Features】 ■ Extremely robust display device designed for field use ■ Waveform display possible on the operation screen ■ LCD panel designed for optimal operability and visibility ■ Measurement data can be transferred to a computer via dedicated software ■ Adjustable pulse voltage and gain

• Other measuring instruments

■Proformer PM-630/PM-650 【Proformer PM-630】 The high-level Proformer PM-630 expands the application range of the Proformer PM-600 with line and area scan modes and a wide selection of statistical views. - Single line scan - Multi-line scan 【Proformer PM-650】 This model adds the following features to the PM-630. - Cross line scan ■Proscope/Proscope+ 【Proscope】 The Proscope integrates the display device and sensor, enabling easier measurements suitable for field use. The target on the screen moves to align with the position of the rebar, making it easy for anyone to use. 【Proscope+】 The Proscope+ can save data on the measured cover or estimated rebar systems. The saved data can be transferred to a computer using a microSD card or USB cable. It can store up to 49,500 points (up to 99 points/file, maximum of 500 files).

• Other measuring instruments

The Echo Chip 550 is the most advanced multifunctional model in the Echo Chip series. The Echo Chip is widely used by field personnel as a pioneering presence in hardness testing machines. Notably, it can accommodate a wide variety of materials and shapes through the exchange of impact devices. In addition to HL (Leeb), it can easily handle HV (Vickers), HB (Brinell), HR (Rockwell), and HS (Shore) hardness. 【POINT】 - Seven types of impact devices are available according to application. - Models that allow data transfer to a PC are also available. - It excels in operability, making it ideal for testing in the field without individual differences. - It has a testing accuracy of ±4HL and is highly precise with excellent reproducibility. - It can convert to any hardness value (HV, HR, HB, HS, etc.). - Custom conversion curves can be incorporated. - It can automatically recognize the direction of impact (360°).

• Other measuring instruments

- Simultaneous exploration of buried objects from the surface to depth is possible with two frequencies (250MHz, 700MHz). - No calibration of relative permittivity is required for each exploration location (automatic calibration). - Spray marking at exploration sites is possible. Operations can be performed on a PC. - The main unit has excellent weight balance, making it easy to handle. - It uses a durable antenna cover, allowing it to adapt to various exploration locations. - It can explore all types of buried objects such as water pipes, cable ducts, gas pipes, fume ducts, and PVC pipes. - Accurate trajectory display is possible when combined with GPS location information. - Exploration is possible up to a maximum depth of 6m (depending on ground conditions). - Encoders (distance meters) are equipped on both sides, allowing for accurate distance measurement even on uneven surfaces. - The scan speed is high (42 scans/m), enabling the acquisition of high-resolution waveforms. - It features a movable and folding mechanism at the head section, providing convenient functions for portability and exploration.

• Non-destructive testing

◆◇◆ Please feel free to consult us regarding the briefing session and functional details ◆◇◆ ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ 　　　～　Leave your inquiries about the linear Shinkansen to us!　～ 　Our specialists will provide proposals tailored to your company's needs. ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ This product has been developed in response to the demand for improved safety and efficiency in tunnel construction. By equipping the conventional spraying system with an electra and basket, it can perform everything from spraying to the installation of support structures with a single unit. Additionally, with the incorporation of a scraper function, it can also remove sprayed concrete that has adhered to the support structures. 【Features】 ○ Equipped with functions from spraying to support structure installation ○ Significantly reduced cycle time ○ Firmly holds the support structures ○ Ensures safe operations ○ Choice of chassis/spraying machine ○ Wide range of motion ○ Excellent scraper function For more details, please contact us or download the catalog.

• Bulldozers and scrapers

This single device can measure the thickness of various materials such as steel, titanium, fiberglass, plastic, and rubber, as well as conduct corrosion and thinning inspections. - Capable of measuring various materials including steel, rubber, plastic, and fiberglass. - Compact size makes it easy to carry and suitable for any location. - Can be used for up to 40 hours (in color display mode).

• Rock drills, demolition machines, and excavators

◆◇◆ Sample experiments and demo unit rentals available ◆◇◆ ■ Easy operation with a Windows 7 compatible PC *1 ■ Capable of saving and transferring measurement and image data ■ Can also convert to other scales ■ The shape fits comfortably in the hand, and the design is attractive and luxurious *1 Due to OS specifications, we cannot guarantee operation. We can provide PCs that have been confirmed to work by our company, so please inquire. (Available options include tablet PCs [recommended], laptops, and desktops)

• Other measuring instruments

**Features** ■ Complies with NEXCO Test Method 726 2009 It conforms to the NEXCO test method "726 2009" and is used in many field applications. ■ No individual differences in test results The air pressure system provides stable penetration force, resulting in no individual differences in the outcomes. Additionally, equipment accuracy can be easily verified through calibration tests using a test anvil. ■ Testing possible in situ There are no restrictions on the direction of penetration, allowing for testing of concrete sprayed on walls in its original position. ■ Wide range of strength estimation By using two types of pins with different penetration resistances, strength estimation is possible in the range of 0.1 to 26 N/m².

• Other analytical equipment

◆◇◆【Same-Day Support】 With FTS, repairs and calibrations are handled domestically ◆◇◆ The Echo Chip Bambino 2 is a very easy-to-use and compact model, as well as being low-cost. It can directly display hardness values (HL, HV, HR, HB, HS). There are two types available: the "D type" for measuring flat surfaces, and the "DL type" which is ideal for measuring the bottom of teeth, corners, and welds. 【Features】 ■ Excellent operability, making it ideal for on-site testing without individual differences. ■ High precision with a testing accuracy of ±4HL and excellent reproducibility. ■ Capable of converting to all hardness values (HV, HR, HB, HS, etc.). ■ Can incorporate unique conversion curves. ■ Automatic recognition of impact direction (360°). 【Applications】 ■ All materials such as iron, aluminum, copper, etc. ■ Industries including automotive, steel, aerospace, machine tools, construction machinery, molds, and shipbuilding. ■ Heat-treated products, raw materials, tempered products, cast products, forged products, welds, etc. ■ On-site management, quality assurance management, etc. ■ Total management in production processes, etc.

• Other measuring instruments

◆◇◆【Same-Day Support】 With FTS, repairs and calibrations are handled domestically ◆◇◆ The Echo Chip Bambino 2 is a very easy-to-use and compact model, as well as being low-cost. It can directly display hardness values (HL, HV, HR, HB, HS). There are two types available: the "D type" for measuring flat surfaces and the "DL type," which is ideal for measuring the base of teeth, corners, and welds. 【Features】 ■ Excellent operability, making it ideal for on-site testing without individual differences. ■ High precision with a testing accuracy of ±4HL and excellent reproducibility. ■ Capable of converting to all hardness values (HV, HR, HB, HS, etc.). ■ Can incorporate unique conversion curves. ■ Automatic recognition of impact direction (360°). 【Applications】 ■ All materials such as iron, aluminum, copper, etc. ■ Industries including automotive, steel, aerospace, machine tools, construction machinery, molds, and shipbuilding. ■ Heat-treated products, raw materials, tempered products, cast products, forged products, welds, etc. ■ On-site management, quality assurance management, etc. ■ Total management in production processes, etc.

• Other measuring instruments

◆◇◆【Same-Day Support】 With FTS, repairs and calibrations are handled domestically ◆◇◆ The Echo Chip Piccolo 2 is a very compact model equipped with memory and communication functions, part of the Echo Chip series Bambino 2. Additionally, using the included transfer software, transferring data from the USB port to a PC is easily possible. (Conversion to text data and incorporation of unique correction factors are also possible.) It can directly display hardness values (HL, HV, HR, HB, HS). There are two types available: the "D type" for measuring flat surfaces and the "DL type," which is ideal for measuring the bottom of teeth, corners, and welds. 【Features】 ■ Excellent operability, making it ideal for on-site testing without individual differences. ■ High precision with a testing accuracy of ±4HL and excellent reproducibility. ■ Capable of converting to all hardness values (HV, HR, HB, HS, etc.). ■ Can incorporate unique conversion curves. ■ Automatic recognition of impact direction (360°).

• Other measuring instruments

◆◇◆【Same-Day Support】 With FTS, repairs and calibrations are handled domestically ◆◇◆ The Echo Chip Piccolo 2 is a very compact model equipped with memory and communication functions, part of the Echo Chip series Bambino 2. Additionally, using the included transfer software, transferring data from the USB port to a PC is easily possible. (Conversion to text data and incorporation of unique correction factors are also possible.) It can directly display hardness values (HL, HV, HR, HB, HS). There are two types available: the "D type" for measuring flat surfaces, and the "DL type," which is optimal for measuring the bottom of teeth, corners, and welds. 【Features】 ■ Excellent operability, making it ideal for on-site testing without individual differences. ■ High precision with a testing accuracy of ±4HL and excellent reproducibility. ■ Capable of converting to various hardness values (HV, HR, HB, HS, etc.). ■ Can incorporate unique conversion curves. ■ Automatic recognition of impact direction is possible (360°).

• Other measuring instruments

◆◇◆ Sample experiments and demo unit rentals available ◆◇◆ 【Features】 ■ Easily detects residual stress (stress concentration areas) ■ No artificial magnetic field required, thanks to self-magnetic field measurement, unlike existing testing methods (magnetic particle testing) ■ Can identify defective areas before issues such as corrosion, fatigue, or creeping occur ■ No reference specimen needed ■ No preparation of the measurement surface required, allowing for quick measurements (can be measured even over painted surfaces) ■ Capable of detecting microcracks in the initial stages, slag in welds, and porosity that cannot be detected by conventional magnetic particle testing ■ Complies with ISO 24497 standards

• Crane and others

◆◇◆【Same-Day Service】 Domestic Repair and Calibration with FTS ◆◇◆ ■ Adopts a bright and easy-to-read LED light source ■ Complies with 【ASTM E-10】 ■ Two reading types: 0.01mm / 0.05mm ■ Compact design ■ Can be used continuously for 200 hours ■ Reduces reading errors by moving the scale measurement bar

• LED light source/module

◆◇◆Sample experiments and demo unit rentals available◆◇◆ ■Adopts a bright and easy-to-see LED light source ■Complies with ASTM E-10 ■Two reading types: 0.01mm / 0.05mm ■Compact design ■Can be used continuously for 200 hours ■Reduces reading errors by moving the scale measurement bar

• LED light source/module

◆◇◆ Sample experiments and demo unit rentals available ◆◇◆ The FTS-eddy1 is a metal material sorting machine that uses electromagnetic induction methods, making it ideal for hardness defect detection, foreign material detection, shape and dimension identification, and more. It can be easily operated by individuals without experience, yielding accurate inspection results. It can be automated (unmanned inspection) when combined with conveyor systems and sorting devices.

• Other measuring instruments

◆◇◆【Same-Day Service】 Repairs and Calibration in Japan with FTS ◆◇◆ *Production of the Schmidt Hammer NR model has been discontinued. The successor model is the Schmidt Live Print N type. Repairs for the Schmidt Hammer (old model) are still being conducted. Details of the Schmidt Hammer (old model) ＝＝＝＝＝＝ 【If you want to estimate concrete strength non-destructively, use the Schmidt Hammer】 This is one method of rebound testing, where a hammer is struck against concrete, and the height to which the hammer rebounds (rebound value: R value) is used to estimate compressive strength. It is a non-destructive testing method that allows inspection without damaging the structure. It is also used to estimate the strength of rocks in addition to concrete. All the compressive strength estimation formulas presented at various academic conferences are based on test data obtained from the Schmidt Concrete Test Hammer. *Please be cautious of imitations of the Schmidt Hammer.

• Concrete curing material
• Rock drills, demolition machines, and excavators
• Non-destructive testing

◆◇◆【Same-Day Service】 Repairs and Calibration Available Domestically with FTS ◆◇◆ Rebar detection, cover measurement, and rebar estimation All possible with a cordless rebar detector 【Features】 ■ Supports rebar detection with three signals: "Target Display," "LED Lighting," and "Signal Sound" ■ Lightweight and compact design at 330g ■ Dustproof and drip-proof structure (IP54), ideal for use on construction sites ■ LCD with backlight ■ Adjacent rebar influence correction function ■ Core drilling support function included

• Concrete core removal

◆◇◆【Same-Day Support】 With FTS, repairs and calibrations are handled domestically ◆◇◆ The Proformer PM-630AI/650AI represents the 6th generation of profilers, inheriting the achievements accumulated over the past 40 years. The Proformer PM-630AI/650AI utilizes a new generation of profiler touch screen units that are protected by design. This measuring instrument offers unparalleled on-site measurement/analysis capabilities and enables real-time control over measurement tasks. 【Features】 ■ Detachable probe cart ■ Ergonomically designed lightweight rubber grip for comfortable handling ■ New universal probe with enhanced rebar detection capabilities due to higher resolution ■ Positioning sensor that can automatically record the orientation of the probe (horizontal, vertical, overhead)

• Unit and other construction

◆◇◆【Same-Day Service】 With FTS, repairs and calibrations are handled domestically ◆◇◆ The Panzit lab+ is a revolutionary ultrasonic testing machine that enhances the functions of the long-loved "Panzit," which has been effectively used for many years in fields such as concrete, wood, ceramics, and bricks. It allows for various settings tailored to specific purposes, expanding its range of applications.

• Other measuring instruments

◆◇◆【Same-Day Service】 Repairs and Calibration Available Domestically with FTS ◆◇◆ Next-Generation Ultrasonic Testing Machine Featuring Touch Screen Technology 【Features】 ■ Extremely durable display device designed for field use ■ Waveform display possible on the operation screen (zoom and scroll functions available) ■ Color touch panel designed for optimal operability and visibility ■ Adjustable pulse voltage and gain ■ 8GB flash memory (can store 100,000 A-scope data) ■ Dry coupling (PE sensor)

• Other measuring instruments

◆◇◆【Same-Day Service】 With FTS, repairs and calibrations are handled domestically ◆◇◆ 【If you want to estimate concrete strength non-destructively, use the Schmidt hammer】 Conventional Schmidt hammers measured the rebound height (R value), but this Silver Schmidt measures the rebound velocity ratio (Q value). This difference allows for a much wider range of strength estimation compared to traditional Schmidt hammers.

• Concrete curing material

◆◇◆【Same-Day Service】 With FTS, repairs and calibrations are handled domestically ◆◇◆ Measuring the electrical resistance of concrete surfaces provides very effective information for understanding the condition of concrete structures. Not only is the electrical resistance of concrete directly related to corrosion and corrosion rates, but recent studies have also shown a correlation between electrical resistance and chloride diffusion coefficients. The ResiPod adopts a four-point WENNER probe method, designed to measure the electrical resistance of concrete in a very simple and completely non-destructive manner. The ResiPod is fast in measurement, highly accurate, and has a waterproof and robust structure, fully meeting the conditions for use on-site.

• Concrete curing material

◆◇◆【Same-Day Service】 With FTS, repairs and calibrations are handled domestically◆◇◆ 【If you want to estimate concrete strength non-destructively, use the Schmidt hammer】 This Schmidt hammer is specially designed for measuring soft materials such as young concrete, gypsum board, and lightweight concrete, with a wide impact area on the striking part (plunger). This type is often used for making judgments such as early formwork removal. *Please be cautious of similar products to the Schmidt hammer.

• Concrete curing material

◆◇◆Sample experiments and demo unit rentals available◆◇◆ The CTS-30 series is an ultrasonic thickness gauge that allows for easy and high-precision thickness measurements with a display resolution of 0.01mm and an accuracy of ±0.05mm. It has both thickness measurement and sound velocity measurement functions. It employs a dual transducer probe, making it suitable for pipe corrosion and wall thickness inspections. With the CTS-30C, the coating cancellation feature allows for easy measurement of the base material's thickness. ● Anyone can easily measure thickness (simple operation by just placing the probe on the target) ● Compact design with dimensions of 65mm×98mm×24mm and a weight of 120g ● Capable of measuring both thickness and sound velocity with one unit ● Easy calibration with the included reference plate ● Can measure the thickness of non-metal materials such as glass, ceramics, and plastics, in addition to metals ● Applicable for corrosion and wall thickness inspections ● Adjustable measurement sensitivity (only for CTS-30B/30C) ● Equipped with a backlight for measurements in dark environments ● Measurement data can be stored for up to 5000 points ● Data transfer to a PC is possible using the included software ● Coating cancellation feature (only for CTS-30C)

• others