トウプラスエンジニアリング List of Products and Services

* The diameter of the sensor part is small at 7mm. * The sensor part is connected to the circuit part with a flexible cable. * The sensor cable length and cable extraction direction can vary in shape. * Options such as waterproof and water-repellent processing for condensation environments and AC adapters can be selected. * The humidity sensor element TI-A is compatible, so circuit adjustments are not necessary during replacement. * Traceability certification can be obtained. * The long-term change is excellent in durability, being less than 1% RH per year (in normal temperature, normal humidity, and clean environments). * It can be used with a power supply voltage of DC 9-25V. * Custom products, including changes in specifications and shapes, can be accommodated from one unit.

• Emergency alarm system

The duct-type temperature and dew point converter TAD65D outputs dew point temperature and gas temperature as a DC 4-20mA analog voltage. It is designed to be used by inserting only the sensor part into the duct. There are many options available, such as "waterproof and water-repellent treatment of the humidity sensor element," which is intended for use in environments where condensation is likely to occur. Features * Stable over the long term even in high humidity areas. * TAD652D is a high-precision model, while TAD653D is a practical model. * Terminal block connection type. * Adoption of a resin probe with excellent thermal insulation reduces the influence of environmental temperature. * Uses a compatible capacitive humidity sensor element TI-A that does not require circuit adjustment during replacement. * Utilizes JIS class A platinum thin-film temperature sensor elements. * Traceability certification is available. * Custom orders are accepted from one unit. * For more details, please contact us or refer to the catalog.

• Information display device
• Other measuring instruments

The absolute humidity sensor TAA80 displays gas temperature, absolute humidity, and relative humidity, and outputs each as an analog voltage. A pressure-resistant type is also available. By simultaneously measuring relative humidity, reliable absolute humidity measurements can be achieved. The TAA801 is a high-precision type, while the TAA802 allows for field replacement of the sensor element. 【Features】 ○ The TAA801 is a high-precision type, and the TAA802 allows for field replacement of the sensor element. ○ The wide-range type can measure absolute humidity up to 588 g/m3 (equivalent to 100°C, 100% RH). ○ The resolution of the high-resolution absolute humidity voltage output is 0.06 g/m3. ○ The shape of the sensor part can be selected from standard type, pressure-resistant type, narrow space type, etc. ○ A variety of options are available, including dust filters and processing for condensation environments. ○ Traceability certification can be obtained. ○ Custom orders are accepted from one unit. *For more details, please contact us or refer to the catalog.

• Air conditioning equipment

The TAD80 temperature and humidity dew point meter displays gas temperature, dew point temperature, and relative humidity, and outputs each as an analog voltage. A pressure-resistant type is also available. By measuring relative humidity simultaneously, it enables highly reliable dew point temperature measurement. The sensor shape can be selected from standard type, pressure-resistant type, narrow space type, etc. 【Features】 ○ TAD801 is a high-precision type with ±1% RH equivalent (at 25℃) ○ TAD802 allows for field replacement of the sensor element ○ The L type comes with a digital display for relative humidity, dew point temperature, and gas temperature ○ The sensor shape can be selected from standard type, pressure-resistant type, narrow space type, etc. ○ Various options such as dust filters and processing for condensation environments are available ○ Traceability certification can be obtained ○ Custom orders are accepted from one unit *For more details, please contact us or refer to the catalog.

• Information display device

The TA65 temperature and humidity meter displays gas temperature and relative humidity, and outputs each as an analog voltage. The TA652 is a high-precision model, while the TA653 is a practical model. The sensor section can be selected from standard type, narrow space type, pressure-resistant type, and hydrogen-compatible pressure-resistant type. There are many options available, such as "waterproof and water-repellent treatment of the humidity sensor element," which is designed for use in environments where condensation is likely to occur. Traceability certification can be obtained, and custom orders are available from one unit. 【Features】 ○ Simultaneous LED display of relative humidity and gas temperature ○ Analog electrical signal output for relative humidity and gas temperature ○ High durability compatible humidity sensor element TI-A used ○ Platinum thin-film temperature sensor element (JIS class A) used ○ TA652 is a high-precision model, TA653 is a practical model ○ Sensor section can be selected from standard type, narrow space type, pressure-resistant type, and hydrogen-compatible pressure-resistant type ○ Traceability certification available ○ Custom orders available from one unit *For more details, please contact us or refer to the catalog.

• Information display device

* It has a compact shape with the sensor section directly connected to the electrical circuit section. * It outputs a linear DC 0-1V for relative humidity from 0 to 100% RH. * The TAM-H1 model has excellent initial cost performance. * The TAM-H1-TIA model allows for the replacement of the humidity sensor element by adopting the compatible humidity sensor element TI-A. * The long-term change is less than 1% RH per year (under normal temperature, humidity, and clean environment), demonstrating excellent durability. * It can be used with a power supply voltage of 5-16V due to the built-in stabilized power supply. * Custom products, including changes in specifications and shapes, can be accommodated from a single unit.

• Emergency alarm system

* The sensor part and the circuit part are connected by a probe with a diameter of 14mm. * The probe length and extraction direction, among other shapes, are diverse. * There are various options available, including temperature sensors, waterproof and water-repellent processing for condensation environments, insulated resin probes, humidity displays, and sensor filter caps. * The duct type is equipped with two fixing through-holes and a rubber packing. * The humidity sensor element TI-A is compatible, so circuit adjustments are not necessary during replacement. * Traceability certification can be obtained. * The long-term change is excellent in durability, at 1% RH/year or less (under normal temperature, humidity, and clean environment). * Due to the built-in stabilized power supply, it can be used with a power supply voltage of DC 9-25V. * Custom products can be accommodated from a single unit, including changes in specifications and shapes.

• Emergency alarm system

The humidity conversion cable type TA50C is a humidity sensor that outputs relative humidity as an analog electrical signal. The sensor part is connected to the circuit part via a flexible cable, allowing for adaptability to complex shapes. The sensor cable length and cable extraction direction are diverse, and there are many options available, including temperature sensors, waterproof and water-repellent processing for condensation environments, humidity displays, and sensor filter caps. 【Features】 - The humidity sensor element TI-A is compatible, eliminating the need for circuit adjustments during replacement. - Traceability certification can be obtained. - The long-term change is less than 1% RH per year (under normal temperature, humidity, and clean environment), demonstrating excellent durability. - With the built-in stabilized power supply, it can be used with a power supply voltage of DC 9-25V. - Custom products can be accommodated from a single unit, including changes in specifications and shapes. *For more details, please download the PDF. Feel free to contact us with any inquiries.

• Emergency alarm system

* The sensor cable length and cable extraction direction have various shapes. * There are many options available, such as temperature sensors, waterproof and water-repellent processing for condensation environments, insulated resin probes, humidity display devices, and sensor filter caps. * The humidity sensor element TI-A is compatible, so no circuit adjustment is needed during replacement. * Traceability certification can be obtained. * The aging change is less than 1% RH per year (in normal temperature, normal humidity, and clean environments), demonstrating excellent durability. * Due to the built-in stabilized power supply, it can be used with a power supply voltage of DC 9-25V. * Custom products, including changes in specifications and shapes, can be accommodated from a single unit.

• Emergency alarm system

* The sensor section and the circuit section are connected by a flexible cable. * There are many basic options available, such as the shape of the humidity sensor element, the length of the sensor cable, and the direction of cable exit. * There are various options available, including waterproof and water-repellent processing for condensation environments and humidity indicators. * The humidity sensor element TI-A is compatible, so no circuit adjustment is needed during replacement. * Traceability certification can be obtained. * The long-term change is less than 1% RH per year (under normal temperature, humidity, and clean environment), demonstrating excellent durability. * Thanks to the built-in stabilized power supply, it can be used with a power supply voltage of DC 9-25V. * Custom products can be accommodated from a single unit, including changes in specifications and shapes.

• Emergency alarm system

By connecting to humidity converter TA50, relative humidity-voltage conversion module TAM-H1, etc., you can obtain ON-OFF voltage-free contact output to drive devices such as humidifiers, dehumidifiers, ventilation fans, and alarms. Features: * Displays the current and target values of relative humidity. * Can control up to two systems, such as a humidifier and dehumidifier or a dehumidifier and alarm, with a single unit. * Can supply DC voltage for driving TA50 and TAM-H1. * Compact panel-mounted design. * PID control is also possible (only for one system). * Ships pre-configured for dehumidification or humidification, allowing for use with just wiring. * Can be used with an AC power supply of 100-240V (50Hz, 60Hz).

• Alarm panel