Levitronix Japan List of Products and Services

The "PuraLev 4000MU (Multi-Use)" is a revolutionary pump series that does not have bearings that may wear out and does not use shaft seals that may leak. Based on the principle of magnetic levitation, the pump impeller floats non-contact within a sealed casing and is driven by the rotating magnetic field of the motor. It is composed of a multi-use pump head and can be sterilized through Cleaning In Place (CIP) and Sterilization In Place (SIP). By adopting magnetic bearings instead of mechanical bearings and designing an independent pump head, the risk of contamination has been significantly reduced. 【Features】 ■ Low shear characteristics ■ Reduced contamination risk due to self-contained magnetic bearings ■ Pump that does not generate particulates ■ Does not create excessive pressure situations compared to roller pumps ■ The gap between the impeller and casing is not narrow enough to trap bacteria *For more details, please refer to the PDF document or feel free to contact us.

• pump

The "PuraLev 2000SU (Single Use)" is a revolutionary pump series that does not have bearings that may wear out and does not use shaft seals that could leak. Based on the principle of magnetic levitation, the pump impeller floats non-contact within a sealed casing and is driven by the rotating magnetic field of the motor. The single-use pump head adopts a bayonet socket mechanism, allowing for intuitive and easy attachment and detachment. 【Features】 ■ Low shear characteristics ■ Reduced contamination risk due to self-contained magnetic bearings ■ Pump that does not generate particles ■ Does not create excessive pressure situations compared to roller pumps ■ The gap between the impeller and casing is not narrow enough to trap bacteria *For more details, please refer to the PDF document or feel free to contact us.

• pump

The "PuraLev 2000MU (Multi-Use)" is a groundbreaking pump series that has no bearings at risk of wear and does not use shaft seals that could leak. Based on the principle of magnetic levitation, the pump impeller floats non-contact within a sealed casing and is driven by the rotating magnetic field of the motor. Both the impeller and casing are made of biocompatible high-purity fluororesin that can be sterilized by cleaning in place (CIP), sterilization in place (SIP), and autoclaving, forming the multi-use pump head. 【Features】 ■ Low shear characteristics ■ Reduced contamination risk due to self-contained magnetic bearings ■ Pump that does not generate particulates ■ Does not create excessive pressure situations compared to roller pumps ■ The gap between the impeller and casing is not narrow enough to trap bacteria *For more details, please refer to the PDF document or feel free to contact us.

• pump

The "PuraLev 600SU (Single Use)" is a groundbreaking pump series that has no bearings that may wear out and does not use shaft seals that may leak. Based on the principle of magnetic levitation, the pump impeller floats non-contact within a sealed casing and is driven by the rotating magnetic field of the motor. The single-use pump head features a bayonet socket mechanism, allowing for intuitive and easy attachment and detachment. 【Features】 ■ Low shear characteristics ■ Reduced contamination risk due to self-contained magnetic bearings ■ Pump that does not generate particulates ■ Does not create excessive pressure situations compared to roller pumps ■ The gap between the impeller and casing is not narrow enough to trap bacteria *For more details, please refer to the PDF document or feel free to contact us.

• pump

The "PuraLev 600MU (Multi-Use)" is a groundbreaking pump series that does not have wear-prone bearings and does not use shaft seals that could leak. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed casing and is driven by the rotating magnetic field of the motor. By adopting magnetic bearings instead of mechanical bearings and designing an independent pump head, the risk of contamination has been significantly reduced. The gap between the impeller and casing is not narrow, and with a low-shear pump design, it can gently transfer delicate liquids. 【Features】 ■ Low shear characteristics ■ Reduced contamination risk due to self-contained magnetic bearings ■ Pump that does not generate particulates ■ Does not create excessive pressure situations compared to roller pumps ■ The gap between the impeller and casing does not trap bacteria *For more details, please refer to the PDF document or feel free to contact us.

• pump

The "PuraLev 200SU (Single Use)" is a revolutionary pump series that does not have bearings that may wear out and does not use shaft seals that could leak. Based on the principle of magnetic levitation, the pump impeller floats non-contact within a sealed casing and is driven by the rotating magnetic field of the motor. By adopting magnetic bearings instead of mechanical bearings and designing an independent pump head, the risk of contamination is significantly reduced. Additionally, the gap between the impeller and casing is not narrow, and the low-shear pump design allows for gentle transfer of delicate liquids. 【Features】 ■ Low shear characteristics ■ Reduced contamination risk due to self-contained magnetic bearings ■ Pump that does not generate particulates ■ Does not create excessive pressure situations compared to roller pumps ■ The gap between the impeller and casing does not trap bacteria *For more details, please refer to the PDF document or feel free to contact us.

• pump

The "PuraLev 200MU (Multi-Use)" is a groundbreaking pump series that does not have bearings that may wear out and does not use shaft seals that may leak. Based on the principle of magnetic levitation, the pump impeller floats non-contact within a sealed casing and is driven by the rotating magnetic field of the motor. The pump casing features a tri-clamp connection and has an aseptic seal design. 【Features】 ■ Low shear characteristics ■ Reduced contamination risk due to self-contained magnetic bearings ■ A pump that does not generate particulates ■ Does not create excessive pressure situations compared to roller pumps ■ The gap between the impeller and casing is not narrow enough to trap bacteria *For more details, please refer to the PDF document or feel free to contact us.

• pump

The "LCO-i100" is a system that integrates and manages the Levtronics Maglev pump and ultrasonic flow sensor, featuring an extremely sophisticated user interface and the latest external connectivity functions. The system operates as a standalone pump, enabling flow monitoring and control, pressure monitoring with up to two connected pressure sensors, temperature monitoring, and various operating modes. The housing is designed to be IP65 dustproof and waterproof, capable of withstanding powerful jets of water from all directions. Protective caps with an IP66 rating or higher are provided for unused connection ports. 【Features】 ■ High-precision flow monitoring and control ■ Built-in signal converter for easy connection of pressure and temperature sensors ■ Maximum pressure limit function to avoid the risk of burst tubes ■ Plug-and-play standalone operation ■ Intuitive user interface via a 7" color multi-touch screen *For more details, please refer to the PDF documentation or feel free to contact us.

• pump
• others

The "LCO-600 (600 W)" is a pump console that enables various operating modes, including standalone pump operation, flow monitoring and control, pressure monitoring with up to two connected pressure sensors, and temperature monitoring. The housing is designed to be dustproof and waterproof with an IP66 rating, capable of withstanding powerful jets of water from all directions. Protective caps exceeding IP66 specifications are provided for unused connection ports. The console can be placed horizontally on a table or installed vertically on a wall, and the panel display direction can be changed via software to match the installation. 【Features】 ■ High-precision flow monitoring and control ■ Built-in signal converter for easy connection of pressure and temperature sensors ■ Maximum pressure limit function to avoid the risk of tube rupture ■ Plug & play standalone operation ■ Intuitive user interface with a 7" color multi-touch screen *For more details, please refer to the PDF document or feel free to contact us.

• pump

The "PuraLev i100SU (Single Use)" is a groundbreaking pump series that does not have bearings that may wear out and does not use shaft seals that could leak. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed casing and is driven by the rotating magnetic field of the motor. By adopting magnetic bearings instead of mechanical bearings and designing an independent pump head, the risk of contamination is significantly reduced. Additionally, the gap between the impeller and the casing is not narrow, and the low-shear pump design allows for the gentle transfer of delicate liquids. 【Features】 ■ Low shear characteristics ■ Reduced contamination risk due to self-contained magnetic bearings ■ Pump that does not generate particulates ■ Does not create excessive pressure situations compared to roller pumps ■ The gap between the impeller and casing does not trap bacteria *For more details, please request materials or view the PDF data available for download.

• pump

The "PuraLev i30SU (single-use)" is a revolutionary pump series that does not have bearings that may wear out and does not use shaft seals that could leak. Based on the principle of magnetic levitation, the pump impeller floats non-contact within a sealed casing and is driven by the rotating magnetic field of the motor. The pump housing allows for the easy attachment and detachment of an intuitive and user-friendly bayonet-type pump head. The controller and motor are integrated into the driver's housing, eliminating concerns about cable connections. 【Features】 ■ Low shear characteristics ■ Reduced contamination risk due to self-contained magnetic bearings ■ Pump that does not generate particulates ■ Does not create excessive pressure situations compared to roller pumps ■ The gap between the impeller and casing is not narrow enough to trap bacteria *For more details, please refer to the PDF document or feel free to contact us.

• pump

The "Clamp-On D Series for Flexible Tubes" is a flow meter designed to measure the flow of high-purity fluids flowing inside flexible tubes without causing any intrusion. It features two piezoelectric transducers facing each other mounted in the sensor housing, each responsible for transmitting and receiving ultrasonic signals. This product consists of a flow sensor and a converter equipped with a digital signal processor (DSP) that processes the sensor signals. 【Features】 ■ Non-invasive flow measurement that prevents contamination ■ No moving parts → No particle generation ■ Reusable sensors, resulting in low waste costs (only tubing costs) ■ Enhanced robustness against bubbles through DSP processing technology ■ Flow control in conjunction with Levtronics magnetic levitation pumps *For more details, please refer to the PDF document or feel free to contact us.

• others

The "LFS-SU Single Use Flow Meter" is a flow meter that can measure high-purity fluids flowing through soft tubes without invasive intervention. Two piezoelectric transducers facing each other are installed in the sensor housing, each responsible for receiving and transmitting ultrasonic signals. The measurement values from the flow sensor are displayed on a 4-digit display. It is possible to perform tasks such as debugging, data collection, and settings using a PC. 【Features】 ■ High precision (1%) flow measurement ■ Non-invasive flow measurement that does not generate contamination ■ No moving parts → No generation of particles ■ Improved robustness against bubbles through DSP processing technology ■ Flow control in conjunction with Levtronics magnetic levitation pumps *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The LEVIBOOST series is a standalone booster unit designed for high-purity chemicals and ultra-pure water. It can be installed in the line without modifying existing systems. Additionally, it utilizes Levtronics' magnetic levitation bearing-less pump and high-precision pressure sensors to enable feedback-based constant pressure control of the fluid. There are two types available: one with a maximum of 75L at 600W and another with a maximum of 140L at 1500W, capable of boosting pressure from 0.1 to 0.4 MPa depending on the type, suitable for both low and high flow rates. For more details, please contact us.

• others

The LEVIFLOW?LFS flow meter series is designed for high-precision flow measurement with minimal contamination and impact on fluids, suitable for high-purity chemicals and ultra-pure water. In particular, it achieves simple fluid control in combination with Levtronics' magnetic levitation bearing-less pumps. There are models with six flow ranges, two of which are suitable for high-temperature applications.

• others

The PTM pump mixer is an innovative system that performs mixing (stirring) inside a tank provided by the customer and transfers the contents to another location using a single component. The stirring utilizes the discharge jet of the pump. The pump is based on our magnetic levitation bearingless pump system, which has no bearings that could wear out and does not use shaft seals that could lead to liquid leakage, making it a groundbreaking non-contact pump and mixer. Based on the principle of magnetic levitation, the pump impeller floats non-contact within a sealed casing and is driven by the rotating magnetic field of the motor. Both the impeller and casing are made of high-purity fluororesin with high chemical resistance. These components, along with the rotor magnets, make up the pump head.

• others

The Puralev multi-use pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. Both the impeller and the pump casing are made of high-purity fluororesin that is biocompatible (FDA, USP-VI, BSE/TSE, and animal-free). These components, along with the rotor magnets, make up the pump head. The rotor speed is electronically controlled, allowing for precise control of fluid pressure and flow rate without pulsation. This pump has two basic system types. The standalone type includes an operation panel for manually setting the speed on the controller, eliminating the need for a PLC to set the speed via an analog signal. The expanded type has a built-in PLC interface, allowing speed to be set by external signals or enabling precise flow or pressure control using flow or pressure sensors. For more details, please contact us.

• others

The Puralev single-use pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. Both the impeller and the pump casing are made of medical-grade polypropylene that is biocompatible (FDA, USP-VI, BSE/TSE, and animal-free) and compatible with gamma sterilization, forming a disposable pump head. These components, along with the rotor magnets, make up the pump head. The disposable pump head can be easily attached and detached via the pump head socket, significantly reducing the risk of contamination. Additionally, the connection of the pump head casing features a tri-clamp specification, making the attachment and detachment with piping simple and clean. The rotor speed is electronically controlled, allowing for precise control of fluid pressure and flow rate without pulsation. The interior of the pump head is designed without narrow grooves, enabling gentle transfer of sensitive liquids without residue. For more details, please contact us.

• others

The Puralev multi-use pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. Both the impeller and the pump casing are made of high-purity fluororesin that is biocompatible (FDA, USP-VI, BSE/TSE, and animal-free). These components, along with the rotor magnets, make up the pump head. The rotor speed is electronically controlled, allowing for precise control of fluid pressure and flow rate without pulsation. This pump has two basic system types. The standalone type includes an operation panel that allows manual speed settings on the controller, eliminating the need for a PLC to set speed via an analog signal. The expanded type has a built-in PLC interface, allowing speed to be set by external signals, or enabling precise flow or pressure control using flow or pressure sensors. For more details, please contact us.

• others

The Puralev single-use pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. The impeller and pump casing are both made of medical-grade polypropylene that is biocompatible (FDA, USP-VI, BSE/TSE, and animal-free) and compatible with gamma sterilization, forming a disposable pump head along with the rotor magnets. The disposable pump head can be easily attached and detached via the pump head socket, significantly reducing the risk of contamination. Additionally, the connection of the pump head casing uses a tri-clamp specification, making attachment and detachment from the piping simple and clean. The rotor speed is electronically controlled, allowing for precise control of fluid pressure and flow rate without pulsation. Furthermore, the interior of the pump head is designed without narrow grooves, enabling gentle transfer of sensitive liquids without residue buildup. For more details, please contact us.

• others

The Puralev multi-use pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. Both the impeller and the pump casing are made of high-purity fluororesin that is biocompatible (FDA, USP-VI, BSE/TSE, and animal-free). These components, along with the rotor magnets, make up the pump head. The rotor speed is electronically controlled, allowing for precise control of fluid pressure and flow rate without pulsation. This pump has two basic system types. The standalone type includes a control panel for manually setting the speed on the controller, eliminating the need for a PLC to set the speed via an analog signal. The expanded type has a built-in PLC interface, allowing speed to be set by external signals or enabling precise flow or pressure control using flow or pressure sensors. For more details, please contact us.

• others

The Puralev single-use pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. The impeller and pump casing are both made of medical-grade polypropylene that is biocompatible (FDA, USP-VI, BSE/TSE, and animal-free) and compatible with gamma sterilization, forming a disposable pump head along with the rotor magnets. The disposable pump head can be easily attached and detached via the pump head socket, significantly reducing the risk of contamination. Additionally, the connection of the pump head casing uses a sanitary tri-clamp specification, making the attachment and detachment from piping simple and clean. The rotor speed is controlled electronically, allowing for precise control of fluid pressure and flow rate without pulsation. Furthermore, the interior of the pump head is designed without narrow grooves, enabling gentle transfer of sensitive liquids without residue. For more details, please contact us.

• others

The BPS-4H pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. Both the impeller and the pump casing are made of high-purity fluororesin with excellent chemical resistance. These components, along with the rotor magnets, constitute the pump head. The rotor speed is electronically controlled, allowing for precise control of fluid pressure and flow rate without pulsation. This pump has two types of basic systems. The standalone type includes an operation panel for manually setting the speed on the controller, allowing for the omission of a PLC that sets the speed with an analog signal. The expanded type has a built-in PLC interface, enabling speed settings via external signals or precise flow or pressure control using flow or pressure sensors. For more details, please contact us.

• others

The motor-controller integrated BPS-i100 pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. Both the impeller and the pump casing are made of high-purity fluororesin with excellent chemical resistance. These components, along with the rotor magnets, form the pump head. Unlike conventional BPS systems, the controller and motor are integrated as a driver housing, freeing users from the hassle of cable wiring and space issues. The impeller's rotational speed is precisely controlled by electronic circuits, resulting in no pulsation. With a pulsation-free, valveless structure, inline boosting is possible. The control system features a PI function, allowing for easier construction of closed-loop flow or pressure control using various sensors.

• others

The BPS-200 pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. Both the impeller and the pump casing are made of high-purity fluororesin with excellent chemical resistance. These components, along with the rotor magnets, make up the pump head. The rotor speed is electronically controlled, allowing for precise control of fluid pressure and flow rate, with no pulsation. This pump has two basic system types. The standalone type features a control panel that allows manual speed settings, eliminating the need for a PLC to set speed via an analog signal. The expanded type has a built-in PLC interface, enabling speed settings via external signals or precise flow or pressure control using flow or pressure sensors. For more details, please contact us.

• others

The BPS-2000 pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. Both the impeller and the pump casing are made of high-purity fluororesin with excellent chemical resistance. These components, along with the rotor magnets, make up the pump head. The rotor speed is electronically controlled, allowing for precise control of fluid pressure and flow rate without pulsation. This pump has two types of basic systems. The standalone type includes a control panel for manually setting the speed on the controller, eliminating the need for a PLC to set the speed via an analog signal. The expanded type has a built-in PLC interface, allowing speed to be set by external signals or enabling precise flow or pressure control using flow or pressure sensors. For more details, please contact us.

• others

The motor-controller integrated BPS-i30 pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump's impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. Both the impeller and the pump casing are made of high-purity fluororesin with excellent chemical resistance. These components, along with the rotor magnets, form the pump head. Unlike conventional BPS systems, the controller and motor are integrated as a driver housing, freeing users from the hassle of cable wiring and space issues. The impeller's rotational speed is precisely controlled by electronic circuits, eliminating pulsation. With a pulsation-free, valveless structure, inline boosting is possible. The control system features PI functionality, allowing for easier construction of closed-loop flow or pressure control using various sensors.

• others

The BPS-600 pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. Both the impeller and the pump casing are made of high-purity fluororesin with excellent chemical resistance. These components, along with the rotor magnets, make up the pump head. The rotor speed is electronically controlled, allowing for precise control of fluid pressure and flow rate without pulsation. This pump has two types of basic systems. The standalone type includes a control panel that allows manual speed setting on the controller, eliminating the need for a PLC to set speed via an analog signal. The expanded type has a built-in PLC interface, enabling speed setting via external signals or precise flow or pressure control using flow or pressure sensors. For more details, please contact us.

• Air compressors, blowers and pumps

The BPS-4000 pump system is an innovative centrifugal pump that does not use consumable bearings or seals. Based on the principle of magnetic levitation, the pump impeller floats non-contact within a sealed pump casing and is driven by the rotating magnetic field of the motor. Both the impeller and the pump casing are made of high-purity fluororesin with excellent chemical resistance. These components, along with the rotor magnets, make up the pump head. The rotor speed is electronically controlled, allowing for precise control of fluid pressure and flow rate, with no pulsation. This pump has two basic system types. The standalone type features a control panel that allows manual speed setting on the controller, eliminating the need for a PLC to set speed via an analog signal. The expanded type has a built-in PLC interface, enabling speed setting via external signals or precise flow or pressure control using flow or pressure sensors. For more details, please contact us.

• Air compressors, blowers and pumps